Features
Specifications
Accessories and Attachments
Drawbars for John Deere Tractors and Current John Deere Scrapers
Electrical
Battery Disconnect Kit, Wheel - BRE10119
The ISO cab implement controller area network (CAN) bus adapter is available to connect any ISO compliant implement or device to an 8R, 8RT, 9R, 9RT, 9RX (including Scraper Special) Series Tractor. These connectors are commonly used for planter frame control boxes.
Refer to the operator's manual, sections 16 (CommandCenter™) and 25 (Operator Station), for additional information on ISO implements.
NOTE: If the harness is not in use, unplug it from the ISO 11783 location or plug the 4-pin connectors together on the harness. If neither of these are done, implement CAN communication errors will occur.
In today’s agricultural environment, accuracy and precision are more important than ever. For something as basic as ground speed, operators need key information for precise control of various implements and the tractor. To support these needs, tractors can be ordered with a dual-beam radar unit as a factory- or field-installed option.
There are several key features that have changed from previous designs.
First, there are two horns for exit of the radio beam. This dual-beam design assures a powerful and accurate signal that will cut through interference that at times makes single-beam units inaccurate. (See 1 in the image above for beam locations.) Dual-beam output makes radar less susceptible to hard surface or tall/wavy grass interference.
Accuracy is aided by a heavy-gauge mounting bracket and rubber isolators that reduce chances that vibration can affect the radio signal.
Dual-beam radar has a fast update rate. When the tractor comes to a stop, accelerates, or varies speed, the indicated ground speed on the tractor display will closely match the actual ground speed. This is important for implements that use radar speed to control operation such as planters, seeders, fertilizer applicators, and sprayers.
In addition, the dual-beam radar does not require calibration to assure accuracy. Its self-calibrating ability is sure to save setup time by elimination of a special procedure that was required in the past.
The radar true ground speed sensor activates the following CommandCenterTM or performance monitor readouts:
- Percent slip
- Hitch slip command (if equipped)
Radar usage improves the accuracy of the following CommandCenter or performance monitor functions:
- Area covered
- Area/hour
- Distance and ground speed
Dual-beam units are compatible with controller area network (CAN) bus and International Organization for Standardization (ISO) bus electrical systems.
In today’s agricultural environment, accuracy and precision are more important than ever. For something as basic as ground speed, operators need key information for precise control of various implements and the tractor. To support these needs, tractors can be ordered with a dual-beam radar unit as a factory- or field-installed option.
There are several key features that have changed from previous designs.
First, there are two horns for exit of the radio beam. This dual-beam design assures a powerful and accurate signal that will cut through interference that at times makes single-beam units inaccurate. (See 1 in the image above for beam locations.) Dual-beam output makes radar less susceptible to hard surface or tall/wavy grass interference.
Accuracy is aided by a heavy-gauge mounting bracket and rubber isolators that reduce chances that vibration can affect the radio signal.
Dual-beam radar has a fast update rate. When the tractor comes to a stop, accelerates, or varies speed, the indicated ground speed on the tractor display will closely match the actual ground speed. This is important for implements that use radar speed to control operation such as planters, seeders, fertilizer applicators, and sprayers.
In addition, the dual-beam radar does not require calibration to assure accuracy. Its self-calibrating ability is sure to save setup time by elimination of a special procedure that was required in the past.
The radar true ground speed sensor activates the following CommandCenterTM or performance monitor readouts:
- Percent slip
- Hitch slip command (if equipped)
Radar usage improves the accuracy of the following CommandCenter or performance monitor functions:
- Area covered
- Area/hour
- Distance and ground speed
Dual-beam units are compatible with controller area network (CAN) bus and International Organization for Standardization (ISO) bus electrical systems.
Engine
The severe-duty water separator factory-installed option or field-installed kit is available for locations where fuel quality can at times be in question. This kit will extend service intervals and help protect the tractor fuel system from damage if the fuel contains more water than the base filtering equipment can handle on a continual basis.
The 60 micron constructed of stainless-steel filter element must be backflushed whenever the bowl is half full of water. The filter can be backflushed up to five times before the filter must be removed and cleaned. Filter element must be replaced when light is no longer visible through the filter. The replacement interval will vary depending on fuel quality.
The severe-duty water separator factory-installed option or field-installed kit is available for locations where fuel quality can at times be in question. This kit will extend service intervals and help protect the tractor fuel system from damage if the fuel contains more water than the base filtering equipment can handle on a continual basis.
The 60 micron constructed of stainless-steel filter element must be backflushed whenever the bowl is half full of water. The filter can be backflushed up to five times before the filter must be removed and cleaned. Filter element must be replaced when light is no longer visible through the filter. The replacement interval will vary depending on fuel quality.
The severe-duty water separator factory-installed option or field-installed kit is available for locations where fuel quality can at times be in question. This kit will extend service intervals and help protect the tractor fuel system from damage if the fuel contains more water than the base filtering equipment can handle on a continual basis.
The 60 micron constructed of stainless-steel filter element must be backflushed whenever the bowl is half full of water. The filter can be backflushed up to five times before the filter must be removed and cleaned. Filter element must be replaced when light is no longer visible through the filter. The replacement interval will vary depending on fuel quality.
The severe-duty water separator factory-installed option or field-installed kit is available for locations where fuel quality can at times be in question. This kit will extend service intervals and help protect the tractor fuel system from damage if the fuel contains more water than the base filtering equipment can handle on a continual basis.
The 60 micron constructed of stainless-steel filter element must be backflushed whenever the bowl is half full of water. The filter can be backflushed up to five times before the filter must be removed and cleaned. Filter element must be replaced when light is no longer visible through the filter. The replacement interval will vary depending on fuel quality.
Hitch and Drawbar
Hitch/coupler allows for quick, no-hassle hookups to many popular integral implements.
Features include:
- Tubular and box-welded steel construction.
- Heat-treated bushings to prevent cracking and breakage.
- Heat-treated hooks for long wear life.
- Locking handles that rotate 100 degrees to open the locking lugs for easy implement release.
- Hardened and zinc-plated steel alloy pins to take the shock of heavy loads and withstand exposure to the elements.
Hitch/coupler allows for quick, no-hassle hookups to many popular integral implements.
Features include:
- Tubular and box-welded steel construction.
- Heat-treated bushings to prevent cracking and breakage.
- Heat-treated hooks for long wear life.
- Locking handles that rotate 100 degrees to open the locking lugs for easy implement release.
- Hardened and zinc-plated steel alloy pins to take the shock of heavy loads and withstand exposure to the elements.
A Category 5 to Category 4 drawbar conversion kit is available for operators who have Category 4 implements that cannot be converted to Category 5.
The preferred method when operating high-horsepower tractors is to convert implements to Category 5.
For additional implement information, please reference the planting and seeding or the tillage information.
NOTE: Drawbar not included in kit.
A ball-type drawbar is used when pulling the DN345 Drawn Dry Spreader. The ball-type drawbar minimizes hitch movement during field operation. The drawbar is equipped with a specially-designed 80-mm (3.1-in.) ball, helping to eliminate any fore-aft movement that creates unwanted jerking customary with a standard hitch pin. The Category 4 ball-type drawbar is approved for transport applications and not approved for draft applications. The ball-type drawbar can be interchanged with a factory drawbar in approximately 20 minutes.
The ball type drawbar is not compatible with 9RT and 9RX Series Tractors.
Optional 3-point hitches increase the tractor's versatility
A 3-point hitch with Quik-Coupler is available as a factory- or field-installed option.
Electronic draft-sensing relays load information to the electrohydraulic hitch control module for fast, smooth, accurate hitch corrections.
Tractors used in deep-ripping applications with hitch-mounted implements and all other applications with high vertical loads on the rear of the tractor are recommended to be equipped with a cast tapered roller bearing gudgeon. Tractors equipped with dozer blades for silage packing operations are also recommended to be equipped with this option.
If ordering a 3-point hitch, with standard flow hydraulics, 4, 5, or 6 selective control valves (SCVs) are available.
If ordering a 3-point hitch, with high-flow hydraulics, 5 or 6 SCVs are available.
Model | 9370R | 9420R | 9470R | 9520R | 9570R | 9620R | |
Code: | Category 4N/3 | x | x | x | |||
Code: | Category 4/4N | x | x | x | x | x | x |
Code: | Category 4N/3 | x | x | x | |||
Code: | Category 4/4N | x | x | x | x | x | x |
*Factory observed*
Hitch controls
Ergonomically designed hitch command control console makes it easy to operate the hitch. See the hitch controls section for more information.
Hydraulics
19-mm (3/4-in.) couplers are available through field-installed attachments with a Hi-Flow hydraulics 435 L/min (115 gpm) system. 18-mm (3/4-in.) couplers are often used where high hydraulic flow is required, typically to run a hydraulic motor. 19-mm (3/4-in.) couplers allow for 45 gpm (170 L/min).
7th and 8th Remote Selective Control Valve - BRE10065
A=Hydraulic charge accumulator
B=Hydraulic hose
C=Clamp
D=Cap screws
A field installed hydraulic accumulator kit is used in applications where implements require large volumes of flowing oil for productivity. Such activities include air seeding, scraper applications or implements with multiple or large hydraulic cylinders. This attachment kit will assist the hydraulic system to maintain adequate hydraulic flow under normal operating conditions.
Add 5th or 6th Remote Selective Control Valves - BRE10168
Lift assist wheels are often used with heavy 3-point-hitch-mounted implements. The hitch auxiliary raise kit provides hydraulic power for use with the lift assist wheels. Turning and transport are made easier using this feature.
Hydraulic trailer brake kits for 9030 and 9R/9RT Series Tractors
The hydraulic trailer brake kit, available as factory- or field-installed on the 9030 Series Tractors (field-installed available on 9020 Series), will assist in the braking of John Deere tractors and large heavy implements.
This hydraulic brake kit provides single line connection to hydraulic braking systems. The kit contains the necessary components along with the tractor's hydraulics to operate implements equipped with proper hydraulic brake components.
NOTE: Trailer brakes are not compatible on 9120, 9220, and 9230 models.
Motor Case Drain Kit, SR Wheel - BRE10112
Easy hookup of planters and other implements
Attaching implement hydraulic hoses to locations on the tractor other than into an SCV has always been a challenge to know what kits are required for compatibility. Getting them installed in a timely manner can at times be confusing and time consuming.
To assist in making hookup to large planters, seeders, and harvesting equipment where multiple connections are required, there are now factory-installed auxiliary hydraulic couplers on wheel tractors.
Auxiliary sump coupler
For applications requiring low return oil back pressure (10 psi or less), the sump coupler kit allows oil to return directly to reservoir (differential case) from hydraulic motor, bypassing the remote coupler and SCV. When connecting motor case or seal return hose to coupler, make sure hose end and coupler are clean.
This coupler is required for correct attachment to current-production seeding products with case drain lines.
Hydraulic motor return couplers
The hydraulic motor return couplers can be used as a coupler for return oil flow, from hydraulic orbital motors and other devices, to the tractor's low-pressure return port, labeled ''R'' on the tractor.
Use of this connector specifically in the return to sump port position is for hydraulic components that require a ''leak-off line'' connection to the tractor. Components and implements that require this typically are larger orbital motors that require a drain for seal protection. The connector in the sump port is not to be used to carry return flow from a function to the tractor.
Power beyond couplers
Power beyond provides live hydraulic power to equipment. This kit supplies oil pressure to implements when the engine is running.
Any implement using power beyond must have a way to control oil flow. Use an independent control valve that is pressure and flow compensating (supplied separately) to control the oil flow rate from this coupler set.
The auxiliary hydraulic optional equipment includes the following:
A - Power beyond couplers
B - Hydraulic motor return couplers
C - Motor seal drain kit
D - Load sense coupler
NOTE: RE151894 and RE67182 cannot be used together.
Easy hookup of planters and other implements
Attaching implement hydraulic hoses to locations on the tractor other than into an SCV has always been a challenge to know what kits are required for compatibility. Getting them installed in a timely manner can at times be confusing and time consuming.
To assist in making hookup to large planters, seeders, and harvesting equipment where multiple connections are required, there are now factory-installed auxiliary hydraulic couplers on wheel tractors.
Auxiliary sump coupler
For applications requiring low return oil back pressure (10 psi or less), the sump coupler kit allows oil to return directly to reservoir (differential case) from hydraulic motor, bypassing the remote coupler and SCV. When connecting motor case or seal return hose to coupler, make sure hose end and coupler are clean.
This coupler is required for correct attachment to current-production seeding products with case drain lines.
Hydraulic motor return couplers
The hydraulic motor return couplers can be used as a coupler for return oil flow, from hydraulic orbital motors and other devices, to the tractor's low-pressure return port, labeled ''R'' on the tractor.
Use of this connector specifically in the return to sump port position is for hydraulic components that require a ''leak-off line'' connection to the tractor. Components and implements that require this typically are larger orbital motors that require a drain for seal protection. The connector in the sump port is not to be used to carry return flow from a function to the tractor.
Power beyond couplers
Power beyond provides live hydraulic power to equipment. This kit supplies oil pressure to implements when the engine is running.
Any implement using power beyond must have a way to control oil flow. Use an independent control valve that is pressure and flow compensating (supplied separately) to control the oil flow rate from this coupler set.
The auxiliary hydraulic optional equipment includes the following:
A - Power beyond couplers
B - Hydraulic motor return couplers
C - Motor seal drain kit
D - Load sense coupler
NOTE: RE151894 and RE67182 cannot be used together.
Lighting
A rear fender rear facing work light is available for your tractor. The kit comes with mounting hardware and a harness which directly connects to your tractors existing harness.
This mounting location allows for illumination of your hitch and drawbar area to aid on making connections to your implement with natural lighting conditions are poor.
The rotary beacon light is installed to meet requirements in commercial or governmental applications. The rotating, high-intensity light rests securely within an amber-colored safety lens. Both the light and lens are replaceable if damaged.
The rotary beacon light features a fully adjustable, double-clamp design that provides a more rigid vertical support stem.
The rotary beacon light is installed to meet requirements in commercial or governmental applications. The rotating, high-intensity light rests securely within an amber-colored safety lens. Both the light and lens are replaceable if damaged.
The rotary beacon light features a fully adjustable, double-clamp design that provides a more rigid vertical support stem.
Miscellaneous
Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.
Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.
Features:
- Dual USB sockets give more options for in cab devices
- 4.2A output to simultaneously charge two tablets or other USB devices
- Sleek, compact design reduces clutter in the cab
- Blue light-emitting diode (LED) indicator informs that power is on
RAM is a trademark of National Products Inc.
Fire Extinguisher, Wheel and 4 Track - BRE10242
With loads of capacity, two removable shelves, and an innovative front door and lid design, this new tractor utility box breaks new ground for convenience, versatility, and rugged design. Grease guns, tow chains, hitch pins, and many other essential items can be stored safely and can be easily accessed, putting an end to cluttered cabs.
Built from welded, heavy-gauge sheet steel, this new box offers long-term durability not seen with other toolboxes. A heavy-duty gas strut on the lid and locking pins make opening and locking simple and easy.
Specifications:
- Made in the USA
- 23 in. x 8 in. x 12 in.
- Two removable shelves
- Heavy-duty construction
- Fold down front door for easy access
- Mount with existing R127764 tractor weights using BRE10153 bracket
- Mount on 9X30 Series Wheel Tractors (front left side) using BRE10291 bracket
With loads of capacity, two removable shelves, and an innovative front door and lid design, this new tractor utility box breaks new ground for convenience, versatility, and rugged design. Grease guns, tow chains, hitch pins, and many other essential items can be stored safely and can be easily accessed, putting an end to cluttered cabs.
Built from welded, heavy-gauge sheet steel, this new box offers long-term durability not seen with other toolboxes. A heavy-duty gas strut on the lid and locking pins make opening and locking simple and easy.
Specifications:
- Made in the USA
- 23 in. x 8 in. x 12 in.
- Two removable shelves
- Heavy-duty construction
- Fold down front door for easy access
- Mount with existing R127764 tractor weights using BRE10153 bracket
- Mount on 9X30 Series Wheel Tractors (front left side) using BRE10291 bracket
Heavy Duty Tapered Roller Bearing Gudgeon - BRE10104
StarFire 6000 Locking Bracket - BPF11074
Tow Cable Kit - for SR Wheel Tractors without Weights - BRE10199
Operator Environment
The 9-pin electrical connector is required to allow TouchSet depth control to be used with implements with this feature. The harness provides a position input to the tractor selective control valve unit enabling the TouchSet system.
This feature allows the operator to adjust height and depth of remote lift cylinders by using the TouchSet controls in the cab.
Antenna Mount and Wiring for Business Band (2-Way) Radio - RE269615
To better accommodate governmental or commercial sales, a back-up alarm is available as a factory- or field-installed attachment on select models. An alarm sounds whenever the transmission is placed in reverse. The alarm provides a high level of warning that the tractor is changing direction.
A backup alarm is base equipment on 9R and 9RT Scraper Special Series Tractors.
Cornerpost Display Bracket - PF90385
7R and 8R Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
- Wide angle, heated, electrically adjustable top pane, electrically telescoping
8RT Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
9R and 9RX Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
- Wide angle, heated, electrically adjustable top pane, electrically telescoping
9RT Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
The electrically adjustable mirrors on both sides of the cab are handy to assist in getting the view needed of variable-width implements, wagons, or carts.
Field-installed kits are also available to convert a manual mirrors to electrically adjustable. See the attachment section for further information.
NOTE: Electrically telescoping mirrors are not compatible with 8RT and 9RT Tractors.
7R and 8R Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
- Wide angle, heated, electrically adjustable top pane, electrically telescoping
8RT Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
9R and 9RX Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
- Wide angle, heated, electrically adjustable top pane, electrically telescoping
9RT Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
The electrically adjustable mirrors on both sides of the cab are handy to assist in getting the view needed of variable-width implements, wagons, or carts.
Field-installed kits are also available to convert a manual mirrors to electrically adjustable. See the attachment section for further information.
NOTE: Electrically telescoping mirrors are not compatible with 8RT and 9RT Tractors.
Floor insulation - BRE10202
Sound systems provide powerful performance with four-speaker system
The John Deere/Bosch radios are available with or without a compact disc (CD) player.
The system also features:
|
For clear reception, an external antenna is included.
Bosch is a trademark of Robert Bosch GmBH. Bluetooth is a trademark of Bluetooth SIG Incorporated. XM is a trademark of XM Satellite Radio Incorporated.
Radio, SubWoofer Kit - BRE10005
The 3-in. field-installed seat belt kit is designed for use with the 8R and 8RT Series Tractor operator seats. The seat belt kit is offered to meet regulations that require a seat belt anchorage force similar to the SAE J386 (including previous versions up to 22.2 kN anchorage strength), IOS 6683, and OSHA requirements (29CFR1926.602) for earthmoving operations and non-agricultural tractor operations.
NOTE: John Deere recommends reviewing the seat belt kit performance capabilities to ensure compliance with local, state, regional, and national requirements.
A favorite worldwide, the RAM self-leveling cup holder is now available as a kit - designed specifically for Deere equipment. It is easily installed to keep your favorite beverage upright even in the roughest terrain. The perfect accessory for any cab that has 10-mm mounting bosses.
The new cup holder features a unique self-leveling design. This pivoting design allows easy adjustment for the holder while offsetting motion of the vehicle when moving.
Features and applications:
- Self-leveling action reduces spills
- Durable design for rough environments
- Easy adjustable mounting for ideal placement
- Includes John Deere branded beverage insulator
- Compatible with most monitor brackets and all 10-mm threaded bosses
Single Lever Multi Function Joystick - BRE10143
Sound systems provide powerful performance with four-speaker system
The John Deere/Bosch radios are available with or without a compact disc (CD) player.
The system also features:
|
For clear reception, an external antenna is included.
Bosch is a trademark of Robert Bosch GmBH. Bluetooth is a trademark of Bluetooth SIG Incorporated. XM is a trademark of XM Satellite Radio Incorporated.
Tablet Mount Kit - BRE10255
Operator's Station
Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.
Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.
Features:
- Dual USB sockets give more options for in cab devices
- 4.2A output to simultaneously charge two tablets or other USB devices
- Sleek, compact design reduces clutter in the cab
- Blue light-emitting diode (LED) indicator informs that power is on
RAM is a trademark of National Products Inc.
The accessories bracket is available for mounting monitors, phones, radios, and other accessories in one convenient location.
The bracket connects in the existing holes inside the cab.
Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.
Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.
Features:
- Dual USB sockets give more options for in cab devices
- 4.2A output to simultaneously charge two tablets or other USB devices
- Sleek, compact design reduces clutter in the cab
- Blue light-emitting diode (LED) indicator informs that power is on
RAM is a trademark of National Products Inc.
7R and 8R Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
- Wide angle, heated, electrically adjustable top pane, electrically telescoping
8RT Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
9R and 9RX Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
- Wide angle, heated, electrically adjustable top pane, electrically telescoping
9RT Series Tractor mirror options
- Manually adjustable, single pane
- Wide angle, heated, electrically adjustable top pane, manual telescoping
The electrically adjustable mirrors on both sides of the cab are handy to assist in getting the view needed of variable-width implements, wagons, or carts.
Field-installed kits are also available to convert a manual mirrors to electrically adjustable. See the attachment section for further information.
NOTE: Electrically telescoping mirrors are not compatible with 8RT and 9RT Tractors.
Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.
Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.
Features:
- Dual USB sockets give more options for in cab devices
- 4.2A output to simultaneously charge two tablets or other USB devices
- Sleek, compact design reduces clutter in the cab
- Blue light-emitting diode (LED) indicator informs that power is on
RAM is a trademark of National Products Inc.
Windshield wiper with washer, right-hand window - BRE10037
PTO
Fully independent 1000-rpm PTO is available as a factory- or field-installed option.
- Available on all 9R and 9RT Series Ag Tractors regardless of transmission.
- Full-power capability for maximum utilization (9R Series Tractors derate to 319 PTO hp when tractor is stationary)
- 44.5-mm (1.75-in.) diameter shaft.
Electrohydraulic (EH) PTO control
The 9R Series Tractor utilizes an EH PTO-engagement switch to activate the optional 1000-rpm PTO.
Vandal Protection
Custom key door locks
Field-installed kit (AL71345) allows for a door handle to be installed that has a key different from the tractor ignition key.
Weights
The following tractor combinations are either recommended or required to install front axle and rear support kits (see chart) based off machine configurations.
Front frame and axle support kits
Front frame and axle support kits provide additional support to the front frame and axle joint when the tractor is used in applications that put high torque and high vertical loads on the front end of the machine. This includes front-mounted spray tanks.
9RX Series Tractors
A front frame support kit (BRE10286) is required on all 9RX Series Tractors with front-mounted spray tanks. The front frame supports are standard on all 9RX Scraper Tractors.
9000 and 9R Series Wheel Tractors
Tractor models | With HydraCushion™ suspension | With front ballast | With front-mounted spray tanks |
9370R-9470R | N/A | BRE10198 required | BRE10198 required |
9520R-9620R | BRE10145 required | N/A | N/A |
Previous models |
|
|
|
9R Series | N/A | RE341567 required | RE341567 required |
9030 Series | N/A | RE267769 recommended | RE267769 required |
9000 Series/9020 Series | N/A | RE213187 recommended | RE213187 required |
For 9460R-9560R Scraper Tractors, please order RE341567 when using front ballast or front-mounted spray tanks. No front support is needed on 9470R-9620R Scraper Tractors.
NOTE: All 9000 and 9R Series Tractors require additional front axle and frame support when used with front-mounted dozer blades. This support is in place of the front axle support and is supplied by the dozer blade manufacturer. Please contact the dozer blade manufacturer for additional information.
Rear axle support kits
The rear axle support provides additional support to the rear frame and axle joint when the tractor is used in applications that put high torque and high vertical loads on the back end of the machine.
9RX Series Tractors
The rear axle support (code 8042) is required when a hitch is ordered on any 9RX Series Tractors; it is optional without a hitch. Rear axle supports are standard on all 9RX Series Scraper Tractors.
9000 and 9R Series Wheel Tractors
Tractor models | High vertical load or heavy draft applications | With order code 8000 (heavy-duty frame) | With 6940-kg (15,000-lb) hitch option, code 4050 or 4051 | With 9072-kg (20,000-lb) hitch option, code 4052 or 4053 |
9370R-9470R | RE268085 recommended | RE268085 recommended | RE268085 recommended | RE268085 required |
9520R-9620R* | N/A | N/A | N/A | N/A |
Previous models |
|
|
|
|
9R Series | RE268085 recommended | RE268085 recommended | RE268085 recommended | RE268085 required |
9030 Series | RE268085 recommended | RE268085 recommended | RE268085 recommended | N/A |
*The rear axle support is not available on 9520R – 9620R Tractors because the double reduction axle design already provides this level of support.
Mounting of dozer blades:
The mounting of dozer blades is approved on 9R Series and 9RX Series Tractors. The mounting of dozer blades is not approved on 9RT Series Tractors.
- For all 9R Series and 9RX Series Tractors, additional frame supports supplied by the dozer manufacturer are required.
- Follow manufacturer guidelines for mounting dozer blade components to the frame of the tractor.
NOTE: 9R Series and 9RX Series Tractors are approved for typical agricultural applications, such as packing silage, pushing snow, and non-commercial dirt moving blade work.
Noncurrent attachment
Note: This is a noncurrent kit. The information provided is valid for each tractor as of the last date that tractor was in production.
Quik-Tatch weights are used to better ballast tractors for both field and loader applications.
Applies to tractor models:
- Maximum of 4 weights on 2040, 6 weights on 2240, and 8 weights on 2440 and 2640 Tractors.
- Maximum of 10 weights per tractor on 2840, 2940, 3150, 4030, 4040, 4230, 4240, 4430, and 4630 Tractors.
- Maximum of 6 weights on 2355N; 8 weights on 2555 Low-Profile, 2755 Low-Profile, and 2855N.
- Maximum of 4 weights on 2155, 6 weights on 2355, and 8 weights on 2555 and 2755 Tractors.
- Maximum of 10 weights on 2955 and 12 weights on 2955 Tractors equipped with high lift capacity.
- Maximum of 14 weights on 4440 Tractors.
- Maximum of 20 weights on 4640 and 4840 Tractors.
- Maximum of 14 weights on 4055 and 20 weights on 4255 and 4455 Tractors.
- Maximum of 20 weights on 4555, 4560, 4755, 4760, 4955 and 4960 Tractors.
- Weights only for 7200, 7400,7600, 7700 and 7800 Tractors.
- Weight support only for 7600 (SN -7754), 7700 (SN -9088), 7800 (SN -14027) Tractors. For all 7200 and 7400 Tractors and 7600 MFWD (SN7755- ), 7700 MFWD (SN9089- ), and 7800 MFWD (SN14028- ): R129660 shown.
The front frame weight bracket kit allows the tractor to be ballasted with up to 20- 37 kg (104 lb) suitcase weights (R127764) for wheel tractors and up to 26- 37 kg (104 lb) suitcase weights (R127764) for track tractors on the front frame.
The front weight frame and 20- 104 lb weights are recommended on scraper designated tractors with flotation tires or when more front weight split is required.
IMPORTANT: Do not exceed 50,000 lb (22,680 kg) when ballasting 9030T Series Track Tractors.
Weight transfer to front axle and reduction to rear axle weight | ||
| Front axle | Rear axle |
Front weight frame
| +600 lb | -135 lb |
20 weights and support | +3780 lb | -1630 lb |
Total | +4380 lb | -1765 lb |
It is recommend that the front axle reinforcement kit be installed on all tractors equipped with any type of front ballast.
IMPORTANT: The front frame weight bracket is not intended to be used for pushing other tractors or implements and should not be used for securing chains or cables as tow points.
Front Weight Bracket, Wheel - BRE10163
The following tractor combinations are either recommended or required to install front axle and rear support kits (see chart) based off machine configurations.
Front frame and axle support kits
Front frame and axle support kits provide additional support to the front frame and axle joint when the tractor is used in applications that put high torque and high vertical loads on the front end of the machine. This includes front-mounted spray tanks.
9RX Series Tractors
A front frame support kit (BRE10286) is required on all 9RX Series Tractors with front-mounted spray tanks. The front frame supports are standard on all 9RX Scraper Tractors.
9000 and 9R Series Wheel Tractors
Tractor models | With HydraCushion™ suspension | With front ballast | With front-mounted spray tanks |
9370R-9470R | N/A | BRE10198 required | BRE10198 required |
9520R-9620R | BRE10145 required | N/A | N/A |
Previous models |
|
|
|
9R Series | N/A | RE341567 required | RE341567 required |
9030 Series | N/A | RE267769 recommended | RE267769 required |
9000 Series/9020 Series | N/A | RE213187 recommended | RE213187 required |
For 9460R-9560R Scraper Tractors, please order RE341567 when using front ballast or front-mounted spray tanks. No front support is needed on 9470R-9620R Scraper Tractors.
NOTE: All 9000 and 9R Series Tractors require additional front axle and frame support when used with front-mounted dozer blades. This support is in place of the front axle support and is supplied by the dozer blade manufacturer. Please contact the dozer blade manufacturer for additional information.
Rear axle support kits
The rear axle support provides additional support to the rear frame and axle joint when the tractor is used in applications that put high torque and high vertical loads on the back end of the machine.
9RX Series Tractors
The rear axle support (code 8042) is required when a hitch is ordered on any 9RX Series Tractors; it is optional without a hitch. Rear axle supports are standard on all 9RX Series Scraper Tractors.
9000 and 9R Series Wheel Tractors
Tractor models | High vertical load or heavy draft applications | With order code 8000 (heavy-duty frame) | With 6940-kg (15,000-lb) hitch option, code 4050 or 4051 | With 9072-kg (20,000-lb) hitch option, code 4052 or 4053 |
9370R-9470R | RE268085 recommended | RE268085 recommended | RE268085 recommended | RE268085 required |
9520R-9620R* | N/A | N/A | N/A | N/A |
Previous models |
|
|
|
|
9R Series | RE268085 recommended | RE268085 recommended | RE268085 recommended | RE268085 required |
9030 Series | RE268085 recommended | RE268085 recommended | RE268085 recommended | N/A |
*The rear axle support is not available on 9520R – 9620R Tractors because the double reduction axle design already provides this level of support.
Mounting of dozer blades:
The mounting of dozer blades is approved on 9R Series and 9RX Series Tractors. The mounting of dozer blades is not approved on 9RT Series Tractors.
- For all 9R Series and 9RX Series Tractors, additional frame supports supplied by the dozer manufacturer are required.
- Follow manufacturer guidelines for mounting dozer blade components to the frame of the tractor.
NOTE: 9R Series and 9RX Series Tractors are approved for typical agricultural applications, such as packing silage, pushing snow, and non-commercial dirt moving blade work.
For operators requiring additional ballast or additional traction on the rear axle
R167153 includes one 75-kg (165-lb) cast starter outer dual-wheel weight used to attach additional 204-kg (450-lb) weights to increase traction on the rear of the tractor by providing additional ballast. These weights can also be used to counterbalance the effect of adding additional weight on the front axle in the form of a front weight support, front hitch, front spray tanks, and front-end loaders.
NOTE: Order attaching hardware through Parts.
NOTE: Adding cast weight to a steel wheel requires that you start with a 75 kg (165 lb) weight.
Weight, Inner Wheel, 1378 Lb. (625 Kg) - R553540
Cast-iron wheel weights provide added ballast at the tires for increased traction and stability.
For operators requiring additional ballast or additional traction on the rear axle
RFR207782 includes two pairs of 204-kg (450-lb) cast rear-wheel weights used to increase traction on the rear of the tractor by providing 816 kg (1800 lb) of additional ballast.
NOTE: Order attaching hardware through Parts.
Cast-iron wheel weights provide added ballast at the tires for increased traction and stability.
Wheel Equipment
Hub extensions mount to the dual/triple hub to extend the steel wheel tread width for exact dual/triple-wheel spacing for 20-in. through 40-in. rows.
Hub extensions mount to the dual/triple hub to extend the steel wheel tread width for exact dual/triple-wheel spacing for 20-in. through 40-in. rows.
Hub extensions mount to the dual/triple hub to extend the steel wheel tread width for exact dual/triple-wheel spacing for 20-in. through 40-in. rows.
Hub extensions mount to the dual/triple hub to extend the steel wheel tread width for exact dual/triple-wheel spacing for 20-in. through 40-in. rows.