×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

2330 MULCH FINISHER

Mulch Finisher

  • Working widths from 21 ft, 9 in. to 56 ft, 3 in. (6.6 to 17.2 m)
  • Excellent residue handling capabilities
  • Lattice-style frame design
  • Hydraulically adjustable rolling baskets   

Apply For FinancingMaintenance Plans
View Product Brochure



Features



Wide range of working widths available to match acreage and horsepower requirements

Three-section configuration Three-section configuration
Five-section configuration Five-section configuration

At 16-km/h (10-mph) working speeds, the 2330 Mulch Finisher can cover up to 27.5 ha (68 acres) per hour enabling producers to size their implements for their unique productivity and agronomic needs.

The 2330 is available in sizes ranging from 6.6 to 17.2 m (21 ft, 9 in. to 56 ft, 3 in.). Horsepower requirements range from 24.5 to 34.2 kW/m (10 to 14 hp-ft), depending on the soil, depth, and speed.

Three-section configurations
Working width Centerframe size Productivity per hour at 16 km/h (10 mph)
6.63 m (21 ft, 9 in.) 13.14 m (10 ft, 3 in.) 10.5 ha (26 acres)
7.54 m (24 ft, 9 in.) 12.1 ha (30 acres)
8.46 m (27 ft, 9 in.) 13.8 ha (34 acres)
9.37 m (30 ft, 9 in.) 15ha (37 acres)
10.29 m (33 ft, 9 in.) 15 ha (37 acres)
Five-section configurations
Working width Centerframe size Productivity per hour at 16 km/h (10 mph)
11.66 m (38 ft, 3 in.) 13.14 m (10 ft, 3 in.) 18.6 ha (46 acres)
13.49 m (44 ft, 3 in.) 21.9 ha (54 acres)
15.32 m (50 ft, 3 in.) 24.7 ha (61 acres)
17.15 m (56 ft, 3 in.) 27.5 ha (68 acres)


NOTE: Specification and design subject to change without notice.

Level-Lift™ frame ensures even operation through all operating depths

T-hitch with Level-Lift turnbuckle T-hitch with Level-Lift turnbuckle
Level-Lift turnbuckle Level-Lift turnbuckle

The Level-Lift hitch ensures a level operation through all operating depths. It also provides consistent gang and sweep depth fore to aft for thorough seedbed preparation. This quick, easy adjustment ensures a flat seedbed floor and level soil profile for planting.

The combination of the disk gang, sweep, and harrow functions promotes consistent and uniform chemical placement and mixing. The T-hitch enables easy turnbuckle adjustment for fast tractor changeover and quick implement leveling fore to aft.

The heavy-duty T-hitch allows for tighter turning, decreasing the number of headlands required for quick turns on the end. The T-hitch also houses the hoses and wiring harness, protecting them from crop and incidental tire contact.

Low-concavity disks are spaced for effective residue slicing

Low-concavity disk blades Low-concavity disk blades
Disks engaged on 2330 Disks engaged on 2330

The producer can work ground faster with the 508-mm x 5-mm (20-in. x 0.197-in.) low-concavity disk blades and outside blades tapered to 457 mm (18 in.) on the 2330 Mulch Finisher"

  • Allows aggressive cutting action
  • Minimizes ridging

Blades are spaced 184-mm (7.25-in.) apart and are fixed at an 8-degree gang angle:

  • Results in effective slicing in heavy residue
  • Moves the soil inward toward the center of the implement for a level seedbed

C-spring cushion gangs help protect against rocks and other obstructions in the field. Dura-Flex™ (3+1) bearings are standard equipment:

  • Triple lip on the inner race and a wide seal between the outer race and flange prevents soil from entering between the bearings and flanges, and helps retain lubrication in the bearings
  • Greaseable for long life

All disk gangs feature combination rigid/self-adjusting scrapers as standard equipment:

  • Prevent soil buildup on inside of disk blades
  • Adjustable to compensate for wear
  • Self-adjusting operation—the spring tension helps hold the scrapers against the disk blade in sticky soil conditions

Engaged disk gangs add to the stability of the implement at higher ground speeds for consistent working depth in uneven ground.

  • Allow for good weed kill and tilling
  • Provide excellent chemical incorporation

True 229-mm (9-in.) split-the-middle spacing provides complete field coverage

229-mm (9-in.) spacing 229-mm (9-in.) spacing

Thanks to an updated frame design that enables true 229-mm (9-in.) split-the-middle shank spacing, the 2330 Mulch Finishers can maintain consistent depth and evenly cover the field to achieve an optimal seedbed while flowing residue and managing weeds.

Seedbed preparation

Even at high speeds and in tough field conditions, the TruPosition™ C-shanks with 91 kg (200 lb) of trip force minimize side-to-side movement and provide the operator better control of the soil profile for improved leveling capabilities.

These shanks provide a full tillage cut across the entire width of the implement. The shanks stay firmly planted in tough soils without quickly relieving. As a result, the soil is mixed completely and streaks are reduced. This helps producers maximize their productivity and create flat seedbeds for smooth planter operation and consistent seed depth.

Weed management

The even 229-mm (9-in.) split-the-middle shank spacing enables the 2330 Mulch Finisher to minimize the potential of remaining strips of weeds that survive the tillage pass. With a mulch finisher pass just prior to planting/seeding, the crop can emerge into a weed-free field that gives it the best chance to reach canopy ahead of the weeds.

If some weeds emerge and a post-emergence herbicide is needed, weeds should be smaller and easier to control. As a result, the mulch finisher pass helps keep weed management costs under control and helps preserve crop yield potential.

TruPosition™ standards deliver 91 kg (200 lb) of trip force for consistent depth and even cut

TruPosition standards TruPosition standards
TruPosition standard components TruPosition standard components

Producers are working ground at faster speeds and in tighter soil conditions, requiring more from standards and frames.

The 91-kg (200-lb) trip TruPosition standards include:

  • Heat-treated mounting bracket
  • Cast pivot assembly with front stop
  • 19-mm x 45-mm x 610-mm (3/4 x 1-3/4 x 24-in.) C-shank, retained by a bolt through the casting and U-bolt—ensures consistent sweep depth, level seedbeds in all secondary conditions, and thoroughly incorporated chemicals
  • 610-mm (24-in.) underframe clearance provides extra room for excellent residue flow on 229-mm (9-in.) spacing
  • 254-mm (10-in.) trip height (at shank) clears rocks and obstacles
  • Replaceable split-tension sleeve and chrome bushing extend life of standard and implement

These standards provide 91 kg (200 lb) of trip force and enable producers to maintain a consistent sweep depth. A combination of spring pressure and pivot casting geometry minimizes side-to-side movement and provides the ultimate in soil profile and seedbed.

Variety of 254-mm (10-in.) sweeps provide solutions for all soil conditions

Bolt-on and knock-on sweep options are available to customize the 2330 Mulch Finisher to perform well in a variety of field conditions.

 

Bolt-on sweeps Knock-on sweeps
Tru-Width™ sweeps Perma-Loc™ sweeps
High-productivity sweeps High-productivity Perma-Loc sweeps

The John Deere high-productivity sweep options are recommended for the high-working-speed market and perform best at speeds of 11-16 km/h (7-10 mph). With a low profile and curved wing shape, the high-productivity sweeps provide low draft and consistent penetration while easily getting through tough and heavy residue. Compared to Tru-Width sweeps, high-productivity sweeps are designed to exert less draft and retain their shape for longer wear life so producers can stay productive in the field longer.

The high-productivity sweeps for the John Deere 2330 Mulch Finisher come in a 254-mm (10-in.) width, both in the bolt-on and the knock-on Perma-Loc version. They fit all 47-degree standards with 44-mm (1.75-in.) hole spacing and 11 mm (0.4375 in.) that currently take Tru-Width sweeps, both John Deere and other makes.

Bolt-on sweeps
Tru-Width sweep Tru-Width sweep
High-productivity sweep High-productivity sweep

254-mm (10-in.) Tru-Width sweeps are optional on mulch finishers with 229-mm (9-in.) shank spacing.

The Tru-Width design offers the following benefits:

  • Maintains full cutting width and point through the life of the sweep
  • Gives greater wear life and improved performance over regular sweeps
  • Provides superior scouring and penetration
  • Works soil well for level seedbed and good seed-to-soil contact
  • Gives excellent chemical incorporation
  • Wears evenly and pulls easily
  • Replacement without charge if breakage occurs before appreciable wear
Knock-on sweeps
Perma-Loc sweep Perma-Loc sweep
High-productivity Perma-Loc sweep High-productivity Perma-Loc sweep

Perma-Loc utilizes a self-tightening ratcheting system for easy installation. Indentations formed in the sweep stem provide the spring clip with a locking surface. The adapter edge, sweep, and spring all act together to tightly lock the sweep to the shank. The operator simply pushes the sweep on by hand to the first notch (audible click). As the resistance is increased (ground engagement), the sweep progressively wedges tighter. The mounting design minimizes lost sweeps and wear on adapter.

Utilizing the removal tool to depress the spring through the stem access opening and a tap with a hammer easily releases the sweep from the adapter and spring.

Perma-Loc sweeps have the advantage of using a Tru-Width design for penetration, residue flow, and long life. The proven 47-degree sweep angle minimizes soil slabbing yet promotes soil movement. The narrow stem enhances excellent soil and residue flow. Stem geometry ensures soil flow over the spring access opening, effectively separating and lifting flow to a point higher on the shank. The force of soil flow is reduced on the shank, improving shank life.

The Perma-Loc system is standard equipment and consists of the following:

  • Adapter
  • Spring hardware
  • Sweep
  • Removal tool (separate option on field cultivators)

Tru-Width sweeps with the Perma-Loc adapter can seamlessly move the high-productivity sweeps.

The high-productivity sweeps use the current Perma-Loc adapter for 47-degree curved standard, N237614.

ProFinish™ Leveling System offers wide range of rear harrows to meet agronomic needs

#

Depending on agronomic needs, producers have a choice of six rear harrow options included in the ProFinish Leveling System on the 2330 Mulch Finisher.

Capabilities Five-bar coil-tine
harrow
Six-bar spike-tooth
harrow
Three-bar coil-tine with
round-bar basket
Three-bar coil-tine with
flat-bar basket
Four-bar spike-tooth with
round-bar basket
Four-bar spike-tooth with
flat-bar basket
Level seedbed Good Better Best Best Best Best
Firm seedbed Fair Good Best Better Best Better
Handle residue Best Better Best Best Better Better
Break up clods Good Better Better Best Better Best
Handle moisture/wet soil Best Better Good Good Good Good
Handle rocks Best Good Better Good Better Good

 

TruSet™ system provides precise depth and pressure control from the cab on the go

TruSet Tillage TruSet Tillage

Integrated TruSet Tillage technology enables 2330 Mulch Finisher operators to adjust disk and sweep depth along with down pressure on the active-hydraulic rolling baskets.

With a short window of time to perform tillage operations, TruSet can provide significant productivity improvements as operators are able to adjust the mulch finisher while covering acres with the push of a button. By responding to conditions as they change throughout the field, TruSet enables operators to generate better-quality tillage performance with the first pass.

Using a GreenStar™ display, a user sees real-time data for disk and sweep depth, and basket down pressure for assurance of desired tillage outcomes. Once the actual set point is validated and configured to the display in the cab, operators are able to make independent adjustments as small as 2.5 mm (0.1 in.). Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions.  

Single-point depth control is included with the TruSet Tillage system, giving operators the choice of automated or manual adjustments. Hydraulic routings on the 2330 Mulch Finisher are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.

Components

TruSet is compatible with John Deere and competitive tractors. Depending on the tractor, a compatibility kit may be needed in addition to the TruSet Tillage system. The following chart identifies the components needed to operate TruSet on a 2330 Mulch Finisher with a GreenStar Ready tractor.

 

TruSet product John Deere 30 Series and newer tractors John Deere 20 Series Tractors (large frame or IVT™ system)  John Deere 20 Series Tractors (small frame or non-IVT)
 John Deere 10 Series and older tractors Competitive tractors
TruSet Tillage system Yes Yes Yes Yes Yes
TruSet compatibility kit No No Yes Yes Yes


Both the TruSet Tillage system and the compatibility kit are available as a field-installed option that can be ordered with the mulch finisher or through aftermarket parts.

All model years of the 2330 can be retrofitted with TruSet.

TruSet requires a GreenStar Ready tractor with a supported display. The TruSet Tillage system must have a connection to the tractor ISO connection.

Additional TruSet information:

Tillage documentation and prescription functionality included with TruSet™ Tillage system

With integrated TruSet Tillage technology, 2330 Mulch Finisher operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature will give producers the ability to capture and analyze the mulch finisher pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.

Operators can document data for the depth of their mulch finisher disks and sweeps along with rolling basket down pressure. By creating an as-applied map based off of global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage pass then later review and analyze the data for future agronomic decisions.

Additionally, the Prescription Creator by Agrian® company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area on the 2330 Mulch Finisher. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that will command the implement to the desired depth and pressure settings for optimum agronomic results.

Agrian is a trademark of Agrian, Inc.

Rear hitch compatible with all 2330 configurations and rear harrows

Rear hitch Rear hitch
2330 with 200 Seedbed Finisher 2330 with 200 Seedbed Finisher

A substantial rear hitch is available to give the 2330 the versatility to pull the 200 Seedbed Finisher or other tow-behind attachments. The rear hitch includes:

  • Rectangular tube construction
  • Telescoping hitch
  • Serviceable drawbar
  • 453-kg (1000-lb) tongue weight rating
  • 13,000 gross vehicle weight (GVW) rating for five-section machines; 10,000 gross vehicle weight (GVW) rating for three-section machines
  • Wiring harness for transport lights
  • Hydraulic hoses and couplers

The rear hitch is fully compatible with all 2330 rear harrow configurations.

Specifications


Compare the specifications of up to 4 models

Key Specs 2330-mulch-finisher
Current Model
Working widths - 3-sectionOption 1: 6.63 m
21.75 ft
Option 2: 7.54 m
24.75 ft
Option 3: 8.46 m
27.75 ft
Option 4: 9.37 m
30.75 ft
Option 5: 10.29 m
33.75 ft
5-sectionOption 1: 11.81 m
38.75 ft
Option 2: 13.49 m
44.25 ft
Option 3: 15.32 m
50.25 ft
Option 4: 17.15 m
56.25 ft
Transport width (without rear harrow) - 3-sectionOption 1: 4.32 m
14.17 ft
Option 2: 4.27 m
14 ft
Option 3: 4.44 m
14.58 ft
Option 4: 4.5 m
14.75 ft
Option 5: 4.72 m
14.5 ft
5-sectionOption 1: 4.67 m
15.33 ft
Option 2: 4.72 m
15.5 ft
Option 3: 4.72 m
Option 4: 4.72 m
Transport height (without rear harrow) - 3-sectionOption 1: 3.12 m
10.25 ft
Option 2: 3.76 m
12.33 ft
Option 3: 4.04 m
13.25 ft
Option 4: 4.62 m
15.17 ft
Option 5: 5.08 m
16.67 ft
5-sectionOption 1: 3.58 m
11.75 ft
Option 2: 3.91 m
12.83 ft
Option 3: 4.5 m
14.75 ft
Option 4: 4.87 m
16 ft
Operating depth - InchesMaximum: 15.2 cm
6 in.
Miles per hour9.7 to 16 km/h
6 to 10 mph
Horsepower per foot24.5 to 34.2 kW/m
10 to 14 hp/ft
Standard spacings - InchesSplit-the-middle - 22.9 cm
9 in.
Fold
Working widths
Rigid frame
2-section
3-sectionOption 1: 6.63 m
21.75 ft
Option 2: 7.54 m
24.75 ft
Option 3: 8.46 m
27.75 ft
Option 4: 9.37 m
30.75 ft
Option 5: 10.29 m
33.75 ft
5-sectionOption 1: 11.81 m
38.75 ft
Option 2: 13.49 m
44.25 ft
Option 3: 15.32 m
50.25 ft
Option 4: 17.15 m
56.25 ft
Transport width (without rear harrow)
Rigid frame
2-section
3-sectionOption 1: 4.32 m
14.17 ft
Option 2: 4.27 m
14 ft
Option 3: 4.44 m
14.58 ft
Option 4: 4.5 m
14.75 ft
Option 5: 4.72 m
14.5 ft, in.
5-sectionOption 1: 4.67 m
15.33 ft
Option 2: 4.72 m
15.5 ft
Option 3: 4.72 m
Option 4: 4.72 m
Transport height (without rear harrow)
2-section
3-sectionOption 1: 3.12 m
10.25 ft
Option 2: 3.76 m
12.33 ft
Option 3: 4.04 m
13.25 ft
Option 4: 4.62 m
15.17 ft
Option 5: 5.08 m
16.67 ft
5-sectionOption 1: 3.58 m
11.75 ft
Option 2: 3.91 m
12.83 ft
Option 3: 4.5 m
14.75 ft
Option 4: 4.87 m
16 ft
Operating depth
Operating speed
Horsepower required
Depth control
Standard
Options
Hydraulics
StandardThree selective-control valves (SCVs) required, hydraulic transport lockup
Options
Electrical
Standard9-pin connector for warning lights, 12-volt required for 5-section models
Options
Hitch
Frame
TubingCenterframe - 3 m
10 ft, in.
Rank tubes - 10.2x10.2 cm
4x4 in.
Mainframe fore-aft tubes - 7.6x20.3 cm
3x8 in.
Wing fore-aft tubes - 7.62x15.2 cm
3x6 in.
Number of ranksFive
Fore-and-aft340.4 cm
134 in.
Underframe clearance61 cm
24 in.
Standard spacings
Standard options
Option 1
Option 2
Option 3
Disk gangs
Depth adjustmentBase equipment
TruSet in-cab depth/pressure control and single-point depth control
Maximum depthEven with sweep: 12.7 cm
5 in.
Vertical adjustmentFrom even with the sweeps to 20.3 cm
8 in.
Gang angle, degrees8 degree (angle)
Blade size50.8x0.5 cm
20x0.197 in.
Blade spacing18.42 cm
7.25 in.
Blade concavityLow
Type of scrapersCombination
Type of spoolSteel fabricated
Gang shaft diameter28.6 mm
1.125 in.
Bearings
Ground-engaging components
Spray attachments
Centerframe depth control wheels and tires
TypeCenterframe tires on Walk-Over tandem wheels
Bias-ply tire options available
Options
3-sectionOption 1: (four) IF280/70 R15 134D tires
Option 2: (four) IF320/70 R15 144D tires
Option 3: (four) IF320/70 R15 144D tires
Option 4: (four) IF320/70 R15 144D tires
Option 5: (four) IF320/70 R15 144D tires
5-sectionOption 1: (four) VF285/70 R19.5 150D tires
Option 2: (four) VF285/70 R19.5 150D tires
Option 3: (four) 440/65 R18 159A8/B tires
Option 4: (four) 440/65 R18 159A8/B tires
Wing frame wheels and tires
Type
Options
3-sectionOption 1: (four) 11L-15 FI LR D tires
Option 2: (four) 12.5-L-15 FI LR D tires
Option 3: (four) 12.5-L-15 FI LR D tires
Option 4: (four) 12.5-L-15 FI LR D tires
Option 5: (four) 12.5-L-15 FI LR D tires
5-sectionOption 1: (eight) 12.5-L-15 FI LR D tires
Option 2: (eight) 12.5-L-15 FI LR D tires
Option 3: (eight) 12.5-L-15 FI LR D tires
Option 4: (eight) 12.5-L-15 FI LR D tires
Stabilizer wheels
TypeMechanical stabilizer wheels and tires available for only 5-section
Radial tire option available
OptionsCastering with 9.5L-15 tires (right- and left-hand sides)
Castering Wheels
TypeActive-hydraulic castering wheels and tires available for 3- and 5-section
Radial tire option available
Options9.5L-15 FI LR D tires (two)
Rear harrow
Spike tooth harrow option 1Rank spacing
30.5 cm
12 in.
Spike spacing
26.67 cm
10.5 in.
Effective spacing
4.45 cm
1.75 in.
Spike dimension
1.9x1.9x30.5 cm
0.75x0.75x12 in.
Angle
15 to 45 degree (angle)
Adjustable 6-bar spike-tooth
Spike tooth harrow option 2
Spike tooth harrow option 3
Coil tine harrow option 1Rank spacing
38.1 cm
15 in.
Tine spacing
31.75 cm
12.5 in.
Effective spacing
63.5 mm
2.5 in.
Tine dimensions
40.6 cm
16 in.
Angle
15 to 60 degree (angle)
Adjustments
Depth, pitch, and angle
Adjustable 5-bar coil-tine
Coil tine harrow option 2
Rolling basket harrow option 1Spike/tine
30.5 cm
12 in.
Rank spacing
30.5 cm
12 in.
Spike/tine spacing
26.67 cm
10.5 in.
Effective spacing
8.89 cm
3.5 in.
Spike/tine dimensions
1.9x1.9x30.5 cm
0.75x0.75x12 in.
Basket diameter
35.56 cm
14 in.
Bearings
Dura-Flex, diameter of: 7.62 cm
3 in.
Self-aligning and greasable
Adjustments
Angle and aggressiveness
4-bar spike with single flat-bar rolling basket
Rolling basket harrow option 2Spike/tine
30.5 cm
12 in.
Rank spacing
30.5 cm
12 in.
Spike/tine spacing
26.67 cm
10.5 in.
Effective spacing
8.89 cm
3.5 in.
Spike/tine dimensions
1.9x1.9x30.5 cm
0.75x0.75x12 in.
Basket diameter
35.6 cm
14 in.
Bearings
Dura-Flex, diameter of 7.62 cm
3 in.
Self-aligning, greasable
Adjustments
Angle and aggressiveness
4-bar spike with single, round-bar rolling basket
Rolling basket harrow option 3Spike/tine
Tine: 40.6 cm
16 in.
Rank spacing
38.1 cm
15 in.
Spike/tine spacing
22.9 cm
9 in.
Effective spacing
7.62 cm
3 in.
Spike/tine dimensions
40.6 cm
16 in.
Basket diameter
35.6 cm
14 in.
Bearings
Dura-Flex, diameter: 7.62 cm
3 in.
Self-aligning, greasable
Adjustments
Angle and aggressiveness
3-bar coil with flat-bar rolling basket
Rolling basket harrow option 4Spike/tine
Tine: 40.6 cm
16 in.
Rank spacing
38.1 cm
15 in.
Spike/tine spacing
22.9 cm
9 in.
Effective spacing
7.62 cm
3 in.
Spike/tine dimensions
40.6 cm
16 in.
Basket diameter
35.6 cm
14 in.
Bearings
Dura-Flex, diameter: 7.62 cm
3 in.
Self-aligning, greasable
Adjustments
Angle and aggressiveness
3-bar coil with round-bar rolling basket
Rear hitch
Tubing size
TelescopingYes
Tongue weight rating680 kg
1,500 lb
GVW
Wiring harness for transport lightsYes
Hydraulic hoses and couplersOne set
Warranty
Additional feature