25A FLAIL MOWER

Flail Mower

Adjustable cutting height
Uses a heavy-duty gearbox with a rating of 65 hp
Compatible with any Category 1 3-point hitch

Maintenance Plans
View Product Brochure

Features

Adjustable cutting height

Roller

The roller can be set at four different cutting heights, from 1.3 cm to 12.7 cm (1/2 in. to 5 in.) The tractor's 3-point hitch upper link is used to regulate the cutting height between these positions.

Power take-off (PTO) drive shaft and gearbox

Heavy-duty gearbox

PTO drive shaft

All mowers use a heavy-duty gearbox with a continuous rating of 65 hp.

The power is transmitted through fully shielded, telescoping drive shafts with quick-attach and detach characteristics for easy hookup.

36 flail-knife rotor provides uniform distribution of pulverized material

Rotor and knives

A three-bank, counterbalanced rotor is equipped with 36 individually replaceable knives:

Rotor revolves at 1850 rpm to produce a 152.9-km/h (95-mph) blade-tip speed for a clean cut.
Knives are arranged on the rotor to provide uniform distribution of material across the full cutting width.
Knives pivot at their mounting points to minimize damage if an obstruction is hit.

Tractor hookup

The 25A hitch is now compatible with any Category 1 3-point hitch (with or without the iMatch™ Quick-Coupler system).

iMatch compatibility starts with serial number 644700.

Specifications

Compare the specifications of up to 4 models

Key Specs	25a-flail-mower Current Model
Machine
Cutting width	Centered Centered 1.98 m 78 in.
Cutting height	13 to 127 mm 0.5 to 5 in.
Hood thickness	3.2 mm 0.125 in.
Blades
Number	72 (36 pairs)
Type	Smooth-cut, cupped-type
Rotor
Speed	1,850 rpm
Diameter	114 mm 4.5 in.
Drives
PTO	540 rpm
Belts	Single HC section
Gauge roller	140 mm 5.5 in.
Tractor HP Required
Minimum	22 kW 30 hp
Maximum	56 kW 75 hp
3-Point Hitch
Quick-coupler compatible	Yes (Category 1 and 2)
Dimensions
Overall width	2.53 m 99 in.
Overall height	0.99 m 39 in.
Overall length	1 m 40 in.
Weight
Approximate	278 kg 612 lb