9R Series with rotary beacon light9R with left and right side beacon lightsThe rotary beacon light is installed to meet requirements in commercial or governmental applications. The rotating, high-intensity light rests securely within an amber-colored safety lens. Both the light and lens are replaceable if damaged. The rotary beacon light features a fully adjustable, double-clamp design that provides a more rigid vertical support stem.

9R Series with rotary beacon light9R with left and right side beacon lightsThe rotary beacon light is installed to meet requirements in commercial or governmental applications. The rotating, high-intensity light rests securely within an amber-colored safety lens. Both the light and lens are replaceable if damaged. The rotary beacon light features a fully adjustable, double-clamp design that provides a more rigid vertical support stem.

Right-hand window wiperOptional right-hand window wiper with washer fluid is available on standard and premium cabs. This option allows the operator to clean the window in dusty conditions from the comfort of the cab. The windshield wiper fluid tank is located on the operator platform near the front of the cab.

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station. Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mountRAM is a trademark of National Products Inc.

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station. Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mountRAM is a trademark of National Products Inc.

A favorite worldwide, the RAM self-leveling cup holder is now available as a kit - designed specifically for Deere equipment. It is easily installed to keep your favorite beverage upright even in the roughest terrain. The perfect accessory for any cab that has 10-mm mounting bosses.Self-leveling cup holder John Deere branded beverage insulator includedThe new cup holder features a unique self-leveling design. This pivoting design allows easy adjustment for the holder while offsetting motion of the vehicle when moving.Features and applications:Self-leveling action reduces spillsDurable design for rough environmentsEasy adjustable mounting for ideal placementIncludes John Deere branded beverage insulatorCompatible with most monitor brackets and all 10-mm threaded bosses

The producer can utilize various integrated technologies during sprayer operation and the following attachments allow them to properly fit, display, and charge these accessories:BRE10015 — Cell phone mountBRE10255 — Tablet mountRE343680 — Accessory mounting bracket

This optional cross-gate joystick replaces fingertip paddle pots for control of selective control valves (SCVs) and allows for programmable hydraulic functionality according to operator preference.

Battery disconnect installedAvailable as either a factory- or field-installed attachment, the battery disconnect switch is used to disconnect the batteries in preparation for 20-day to 90-day storage periods. The switch cuts the power to the entire tractor to aid in maintaining battery life. An indicator light allows for safe and proper disconnect. The light will flash until it is safe to disconnect. This allows the diesel exhaust fluid (DEF) tank and lines to purge. (Final Tier 4 has an indicator light and Interim Tier 4 has no indicator light.) Cummins is a trademark of Cummins Incorporated.

ISO 11783 location in R-Series Tractor cabRE322780 ISO cab implement CAN bus adapterThe ISO cab implement controller area network (CAN) bus adapter is available to connect any ISO compliant implement or device to an 8R, 8RT, 9R, 9RT, 9RX (including Scraper Special) Series Tractor.  These connectors are commonly used for planter frame control boxes. Refer to the operator's manual, sections 16 (CommandCenter™) and 25 (Operator Station), for additional information on ISO implements. NOTE: If the harness is not in use, unplug it from the ISO 11783 location or plug the 4-pin connectors together on the harness.  If neither of these are done, implement CAN communication errors will occur.

Dual-beam radar emission horns Dual-beam radar (tracks tractor shown)Shield for dual radar beamIn today’s agricultural environment, accuracy and precision are more important than ever. For something as basic as ground speed, operators need key information for precise control of various implements and the tractor. To support these needs, tractors can be ordered with a dual-beam radar unit as a factory- or field-installed option. There are several key features that have changed from previous designs. First, there are two horns for exit of the radio beam. This dual-beam design assures a powerful and accurate signal that will cut through interference that at times makes single-beam units inaccurate. (See 1 in the image above for beam locations.) Dual-beam output makes radar less susceptible to hard surface or tall/wavy grass interference. Accuracy is aided by a heavy-gauge mounting bracket and rubber isolators that reduce chances that vibration can affect the radio signal. Dual-beam radar has a fast update rate. When the tractor comes to a stop, accelerates, or varies speed, the indicated ground speed on the tractor display will closely match the actual ground speed. This is important for implements that use radar speed to control operation such as planters, seeders, fertilizer applicators, and sprayers. In addition, the dual-beam radar does not require calibration to assure accuracy. Its self-calibrating ability is sure to save setup time by elimination of a special procedure that was required in the past. The radar true ground speed sensor activates the following CommandCenterTM display or performance monitor readouts:Percent slipHitch slip command (if equipped)Radar usage improves the accuracy of the following CommandCenter or performance monitor functions:Area coveredArea/hourDistance and ground speedDual-beam units are compatible with controller area network (CAN) bus and International Organization for Standardization (ISO) bus electrical systems.

Dual-beam radar emission horns Dual-beam radar (tracks tractor shown)Shield for dual radar beamIn today’s agricultural environment, accuracy and precision are more important than ever. For something as basic as ground speed, operators need key information for precise control of various implements and the tractor. To support these needs, tractors can be ordered with a dual-beam radar unit as a factory- or field-installed option. There are several key features that have changed from previous designs. First, there are two horns for exit of the radio beam. This dual-beam design assures a powerful and accurate signal that will cut through interference that at times makes single-beam units inaccurate. (See 1 in the image above for beam locations.) Dual-beam output makes radar less susceptible to hard surface or tall/wavy grass interference. Accuracy is aided by a heavy-gauge mounting bracket and rubber isolators that reduce chances that vibration can affect the radio signal. Dual-beam radar has a fast update rate. When the tractor comes to a stop, accelerates, or varies speed, the indicated ground speed on the tractor display will closely match the actual ground speed. This is important for implements that use radar speed to control operation such as planters, seeders, fertilizer applicators, and sprayers. In addition, the dual-beam radar does not require calibration to assure accuracy. Its self-calibrating ability is sure to save setup time by elimination of a special procedure that was required in the past. The radar true ground speed sensor activates the following CommandCenterTM display or performance monitor readouts:Percent slipHitch slip command (if equipped)Radar usage improves the accuracy of the following CommandCenter or performance monitor functions:Area coveredArea/hourDistance and ground speedDual-beam units are compatible with controller area network (CAN) bus and International Organization for Standardization (ISO) bus electrical systems.

7030 Series Large-Frame Tractor shownThe severe-duty water separator factory-installed option or field-installed kit is available for locations where fuel quality can at times be in question. This kit will extend service intervals and help protect the tractor fuel system from damage if the fuel contains more water than the base filtering equipment can handle on a continual basis.   The 60 micron constructed of stainless-steel filter element must be backflushed whenever the bowl is half full of water. The filter can be backflushed up to five times before the filter must be removed and cleaned. Filter element must be replaced when light is no longer visible through the filter. The replacement interval will vary depending on fuel quality.

7030 Series Large-Frame Tractor shownThe severe-duty water separator factory-installed option or field-installed kit is available for locations where fuel quality can at times be in question. This kit will extend service intervals and help protect the tractor fuel system from damage if the fuel contains more water than the base filtering equipment can handle on a continual basis.   The 60 micron constructed of stainless-steel filter element must be backflushed whenever the bowl is half full of water. The filter can be backflushed up to five times before the filter must be removed and cleaned. Filter element must be replaced when light is no longer visible through the filter. The replacement interval will vary depending on fuel quality.

Front weight supportThe front frame weight bracket kit allows the tractor to be ballasted with up to 20 37 kg (104 lb) suitcase weights (R127764) for wheel tractors and up to 26 37 kg (104 lb) suitcase weights (R127764) for track tractors on the front frame. The front weight frame and 20 37-kg (104 lb) weights are recommended on scraper designated tractors with flotation tires or when more front weight split is required. IMPORTANT: Do not exceed 22,680 kg (50,000 lb) when ballasting 9030T Series Track Tractors.Weight transfer to front axle and reduction to rear axle weight  Front axleRear axleFront weight frame +272.2 kg (600 lb)-61.2 (135 lb)20 weights and support+1714.6 kg (3780 lb)-739.4 kg (1630 lb)Total+1986.7 kg (4380 lb)-800.6 kg (1765 lb) It is recommend that the front axle reinforcement kit be installed on all tractors equipped with any type of front ballast. IMPORTANT: The front frame weight bracket is not intended to be used for pushing other tractors or implements and should not be used for securing chains or cables as tow points.

Kit shown in green mounted on gray main frameThe front ballast bracket is optional from the factory using order code 8955. In some applications and conditions, it is beneficial to add additional front ballast to offset loads and/or gain additional traction. This kit creates provision to add up to 36 suitcase weights (R127764). Adding weight to the front of the machine may also require the installation of front axle reinforcement kit factory order code 8041, or field installed BRE10198. On machines equipped with tow cables, this kit may interfere and require adjustment or additional parts for the tow cable to mount correctly to the front of the machine. Reference the part catalog for additional information.

Noncurrent attachmentNote: This is a noncurrent kit. The information provided is valid for each tractor as of the last date that tractor was in production. Quik-Tatch weights are used to better ballast tractors for both field and loader applications.  Applies to tractor models:Maximum of 4 weights on 2040, 6 weights on 2240, and 8 weights on 2440 and 2640 Tractors.Maximum of 10 weights per tractor on 2840, 2940, 3150, 4030, 4040, 4230, 4240, 4430, and 4630 Tractors. Maximum of 6 weights on 2355N; 8 weights on 2555 Low-Profile, 2755 Low-Profile, and 2855N.Maximum of 4 weights on 2155, 6 weights on 2355, and 8 weights on 2555 and 2755 Tractors.Maximum of 10 weights on 2955 and 12 weights on 2955 Tractors equipped with high lift capacity.Maximum of 14 weights on 4440 Tractors.Maximum of 20 weights on 4640 and 4840 Tractors.Maximum of 14 weights on 4055 and 20 weights on 4255 and 4455 Tractors.Maximum of 20 weights on 4555, 4560, 4755, 4760, 4955 and 4960 Tractors.Weights only for 7200, 7400,7600, 7700 and 7800 Tractors.Weight support only for 7600 (SN -7754), 7700 (SN -9088), 7800 (SN -14027) Tractors.  For all 7200 and 7400 Tractors and 7600 MFWD (SN7755- ), 7700 MFWD (SN9089- ), and 7800 MFWD (SN14028- ): R129660 shown. R129660 - Quick-Tatch Weight

9RT rear hydraulicsCommandARM™ SCV controlsHigh-flow fifth and sixth SCVs provide additional hydraulic flow for use with triple scraper pans.

Five remote SCVsThe field-installed electronic SCV kits are made available for tractors needing additional SCVs. These kits provide metered flow rates and timed detents with pressure and load sense compensation. The additional SCV(s) can also be integrated into the Headland Management System. The field-installed kit includes International Organization for Standardization (ISO) lever-assisted breakaway couplers and armrest control lever.

A rear fender rear facing work light is available for your tractor. The kit comes with mounting hardware and a harness which directly connects to your tractors existing harness. This mounting location allows for illumination of your hitch and drawbar area to aid on making connections to your implement with natural lighting conditions are poor.

John Deere CommandView™ III cab offers several options for outside mirrors to increase rear visibility to assist in getting the view needed of variable-width implements, wagons, or carts. The wide-angle mirror options provide excellent overall rear visibility and are easily adjusted and telescope to maintain visibility for a variety of implements. 7R and 8R Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, manual telescopingWide angle, heated, electrically adjustable top pane, electrically telescoping8RT Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, electrically telescoping9R and 9RX Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, manual telescopingWide angle, heated, electrically adjustable top pane, electrically telescoping9RT Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, electrically telescoping Field-installed kits are also available to convert a manual mirror to an electrically adjustable mirror. See the attachment section for further information. NOTE: Left-hand electrically telescoping mirrors are not compatible with 8RT and 9RT Tractors.Manually adjustable, single pane mirrorsWide-angle, heated, electrically adjustable top pane, manually telescoping mirrorsWide-angle, heated, electrically adjustable top pane, electrically telescoping mirrorsWide-angle, heated top pane, electrically adjustable top pane, non-telescoping left-hand mirror for 8RT and 9RT Series Tractors

John Deere CommandView™ III cab offers several options for outside mirrors to increase rear visibility to assist in getting the view needed of variable-width implements, wagons, or carts. The wide-angle mirror options provide excellent overall rear visibility and are easily adjusted and telescope to maintain visibility for a variety of implements. 7R and 8R Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, manual telescopingWide angle, heated, electrically adjustable top pane, electrically telescoping8RT Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, electrically telescoping9R and 9RX Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, manual telescopingWide angle, heated, electrically adjustable top pane, electrically telescoping9RT Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, electrically telescoping Field-installed kits are also available to convert a manual mirror to an electrically adjustable mirror. See the attachment section for further information. NOTE: Left-hand electrically telescoping mirrors are not compatible with 8RT and 9RT Tractors.Manually adjustable, single pane mirrorsWide-angle, heated, electrically adjustable top pane, manually telescoping mirrorsWide-angle, heated, electrically adjustable top pane, electrically telescoping mirrorsWide-angle, heated top pane, electrically adjustable top pane, non-telescoping left-hand mirror for 8RT and 9RT Series Tractors

John Deere CommandView™ III cab offers several options for outside mirrors to increase rear visibility to assist in getting the view needed of variable-width implements, wagons, or carts. The wide-angle mirror options provide excellent overall rear visibility and are easily adjusted and telescope to maintain visibility for a variety of implements. 7R and 8R Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, manual telescopingWide angle, heated, electrically adjustable top pane, electrically telescoping8RT Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, electrically telescoping9R and 9RX Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, manual telescopingWide angle, heated, electrically adjustable top pane, electrically telescoping9RT Series Tractor mirror options:Manually adjustable, single paneWide angle, heated, electrically adjustable top pane, electrically telescoping Field-installed kits are also available to convert a manual mirror to an electrically adjustable mirror. See the attachment section for further information. NOTE: Left-hand electrically telescoping mirrors are not compatible with 8RT and 9RT Tractors.Manually adjustable, single pane mirrorsWide-angle, heated, electrically adjustable top pane, manually telescoping mirrorsWide-angle, heated, electrically adjustable top pane, electrically telescoping mirrorsWide-angle, heated top pane, electrically adjustable top pane, non-telescoping left-hand mirror for 8RT and 9RT Series Tractors

AutoLoad is exclusive to John Deere and is a major innovation in the earthmoving industry.  It allows novice and experienced operators to be more consistent and productive while operating John Deere tractors and scrapers. With the touch of a button, operators maximize productivity and efficiency even if they have never operated tractors and scrapers. The system includes a draft sensor on the drawbar, radar for measuring wheel slip, position sensors on the scrapers, AutoLoad CommandCenter™ console, and a controller that analyzes the inputs from all sensors and controls the scraper operation during the loading cycle, providing consistent productivity. Compatible with John Deere ejector and carry-all scrapersSingle, double, or triple scraper pansWill retrofit to any John Deere scraper, model year 2004 and newer

Mounting brackets are available to mount a standard ABC extinguisher to your tractor. The bracket mounts to the entrance platform at the top of the entrance/egress steps on 9R series tractors. This location allows quick access to the extinguisher near the cab door, should it ever be needed.

Hydraulic hose support This field-installed option reduces stress on the couplers by providing support to the heavy hydraulic hoses used in scraper application. The hydraulic hose support attaches to the back of the tractor next to the drawbar and is available on all 9R, 9RT and 9RX Scraper Tractors.

Custom key door locksCustom key door lock kitField-installed kit (AL71345) allows for a door handle to be installed that has a key different from the tractor ignition key.

Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station. Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.Mounting bracket with cell phone and tablet mountMounting bracket with cell phone and tablet mountRAM is a trademark of National Products Inc.

Tow cable front hookRear tow cable connection pointThe front tow cable is recommended for pulling all 9 Family Tractors in time of needed assistance. Tow cables are available as a factory-installed option on all ag tractors and are base equipment on all Scraper Special Tractors. The tow cable attaches to the area in front of the drawbar and is also available as a field-installed option.

Tow cable front hookRear tow cable connection pointThe front tow cable is recommended for pulling all 9 Family Tractors in time of needed assistance. Tow cables are available as a factory-installed option on all ag tractors and are base equipment on all Scraper Special Tractors. The tow cable attaches to the area in front of the drawbar and is also available as a field-installed option.

Accessories mounting bracketTray kitThe accessories bracket is available for mounting monitors, phones, radios, and other accessories in one convenient location. The bracket connects in the existing holes inside the cab.

This kit provides antenna mount, radio mounting plate, and wiring for a business band radio.

Backup alarm on a 9R Series TractorTo better accommodate governmental or commercial sales, a back-up alarm is available as a factory- or field-installed attachment on select models. An alarm sounds whenever the transmission is placed in reverse. The alarm provides a high level of warning that the tractor is changing direction.A backup alarm is base equipment on 9R and 9RT Scraper Special Series Tractors.

The floor insulation kit can reduce cab heat generated by transmission and hydraulic oil temperatures below the cab floor. It can reduce the overall cab temperature, as it works as a thermal barrier. The product comes in a large sheet, which is easily cut to fit the contours of the cab floor. The kit is large enough to fit the floor pan design of 6 through 9 Series Tractor cabs.

This kit replaces the rear upholstery behind the operator seat with an additional panel containing a grille screen and base speaker. It allows the tractor to reproduce a deeper range of base tones with seamless installation. The clean look and powerful sound adds a level of comfort and enjoyment for long days in the cab.

RadioJohn Deere radio packages provide powerful performance with standard four-speaker systems. The standard radio package features easy-to-use operator controls located on the CommandCenter™ display and at the radio faceplate. AM/FM and weatherband tuner allows operators to stay tuned to their favorite radio stations and keep current with ever-changing weather patterns. An auxiliary input for connecting an external media source is conveniently located on the right-side console. The premium radio package adds to these great features with Bluetooth® to connect with compatible media devices and a USB input for connecting external media sources. A subwoofer is also available in this package to increase the operator experience within the cab. Both radio packages help create a comfortable operator environment for long hours in the cab.Standard radio packageAM/FM and weatherband tuner (NOAA broadcast channels)External antennaRemote controls through the CommandARM™ controls (volume, mute, channel up/down)CommandCenter display with station selection, volume level, and station presetsAuxiliary input (3.5 mm [0.14 in.]) on right-side consoleFour coaxial speakersPremium radio package*AM/FM, weatherband (NOAA broadcast channels), and worldwide premium tunerExternal antennaRemote controls through CommandARM (volume, mute, channel up/down)CommandCenter display with station selection, volume level, and station presetsUniversal serial bus (USB) inputAuxiliary input on right-side consoleBluetooth capable with microphone (allows phone and streaming audio)Four coaxial speakersSubwoofer*XM Satellite functionality for premium radio needs to be upgraded by purchasing the XM antenna, XM receiver, brackets, and wiring harnesses via a kit from your local John Deere dealer.Radio controlsBosch is a trademark of Robert Bosch GmBH. Bluetooth is a trademark of Bluetooth SIG Incorporated. XM is a trademark of XM Satellite Radio Incorporated. Delco is a trademark of General Motors LLC.

Conversion kitA Category 5 to Category 4 drawbar conversion kit is available for operators who have Category 4 implements that cannot be converted to Category 5. The preferred method when operating high-horsepower tractors is to convert implements to Category 5. For additional implement information, please reference the planting and seeding or the tillage information.

Rear-wheel weightCast-iron wheel weights provide added ballast at the tires for increased traction and stability.

Seat belt for 8R Series TractorsThe 3-in. field-installed seat belt kit is designed for use with the 8R and 8RT Series Tractor operator seats. The seat belt kit is offered to meet regulations that require a seat belt anchorage force similar to the SAE J386 (including previous versions up to 22.2 kN anchorage strength), IOS 6683, and OSHA requirements (29CFR1926.602) for earthmoving operations and non-agricultural tractor operations. NOTE: John Deere recommends reviewing the seat belt kit performance capabilities to ensure compliance with local, state, regional, and national requirements.

Rear-wheel weightCast-iron wheel weights provide added ballast at the tires for increased traction and stability.

For operators requiring additional ballast or additional traction on the rear axle72-kg (159-lb), 205-kg (452-lb), 625-kg (1378-lb), and 970-kg (2138-lb) cast rear-wheel weights are available for the 7R and 8R Series Tractors. The attaching hardware for all rear-wheel weight options may be ordered through parts. The range of rear-wheel weights can provide the proper amount of rear axle ballast for a variety of applications. The addition of this ballast will increase traction on the rear axle of the tractor. These weights can also be used to counterbalance the effect of adding additional weight on the front axle in the form of a front weight support, front hitch, front spray tanks, and front-end loaders. 72-kg (159-lb) starter weightThe 72-kg (159-lb) cast rear-wheel weight is offered individually as attachment R167153. This weight can be used either as an inner or outer rear-wheel weight. The 72-kg (159-lb) weight can be used by itself or as a starter weight for the 205-kg (452-lb) rear-wheel weights. 205-kg (452-lb) weightThe 205-kg (452-lb) cast rear-wheel weight is offered individually as attachment R07782. The 72-kg (159-lb) starter weight (R167153) must be installed prior to the 205-kg (452-lb) weight on rear steel wheels. This practice is optional on cast wheels; however, most weight packages will be configured this way. 625-kg (1378-lb) weightR553540 includes one 625-kg (1378-lb) cast inner rear-wheel weight. This weight is to be used on the inside of the rear wheel assembly. This option can be stacked on a double-flat cast hub, with a 70-kg (154-lb) starter ring on the outside. 70-kg (154-lb) weight BRE10026 features a 70-kg (154-lb) starter weight. The starter weight and guide lugs provide improved installation and removal of the 900-kg (1984-lb) weight. This weight can be used individually on the outside of the steel, dual rims on rack-and-pinion axles, or on the outside of the double-flat, single-taper wheel hub. For the approved cast hubs, can also be used with the inner cast weights as well. NOTE: Use on the outer side of approved cast hubs will limit dual tire and spacing capability.  900-kg (1984-lb) weight   Individual R341378 900-kg (1984-lb) weights ordered through Parts. The 70-kg (154-lb) starter weight is required for installation, and provides guide lugs for improved installation and removal of the 900-kg (1984-lb) weight. 900-kg (1984-lb) weight ballast option is compatible with steel, dual wheels with rim diameters of 106.7, 116.8 cm, or 127 cm (42 in., 46 in., 50 in., or 54 in.). This allows the weights to be added to only the outer rear dual on a rack-and-pinion axle and double-flat axle with single-taper hub. NOTE: This weight option is not compatible with 96.5-cm or 137.2-cm (38-in. or 54-in.) wheels.