Z355E
ZTrak™ Mower with 48-in. Deck
- 22 hp* (16.4 kW) V-Twin engine
- 48-in (122 cm) Accel Deep™ Mower Deck, compatible with optional MulchControl™ kit
- Heavy-duty dual hydrostatic Hydro-Gear® transmission, maximum forward speed 7 mph
- 2-year/120-hour bumper-to-bumper warranty
Maintenance Plans
Features
Engine, left rear view
Engine, right rear view
A V-twin engine with 44.2-cu in. (724-cc) displacement provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
- V-twin cylinder design for greater torque, lower vibration, and improved sound quality
- Engine model M44
- Electronic ignition for fast starts
- Cast-iron sleeves for longer engine life
- Overhead valves for excellent power and fuel economy
- Spin-on oil filter with pressure lubrication for keeping the oil cleaner for long engine life and extended time between oil changes; pressure lubrication is also more effective when operating the tractor on an incline
- Easy access to the no-tools oil drain valve for oil changes
- Rear engine guard for protecting the engine and providing additional strength and integrity
Engine oil check/fill tube and oil-drain tube
Replaceable fuel filter and oil filter
Replaceable fuel filter and oil filter are easy to access and change to minimize service time and cost.
John Deere recommends the use of fuel stabilizer in gasoline. See Fuel-Protect for gasoline engines (8 oz [237 mL]) for more information
ZTrak™ Z355E with 48A Mower Deck
The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:
- 4.83-in. (12.3-cm) deep throughout the entire deck shell for optimum mowing and mulching performance
- Optional MulchControl™ system provides superior mulching performance and versatility.
- Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
- Mower deck is suspended from the vehicle for a smooth and level cut
- Adjustable mower wheels, positioned just above ground level, help reduce scalping
- 0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
Excellent cut quality
48A Mower Deck top (similar mower from X700 Series Tractor shown)
48A Mower Deck underside (similar mower from X700 Series Tractor shown)
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
- Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
- Helps maintain excellent cut quality at faster mowing speeds
- Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
- Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.
Productivity - getting the job done fast
Right side of Accel Deep 48A Mower Deck
Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:
- Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds
Large discharge opening is both high and wide to handle more material:
- Gives a smooth, even discharge of clippings at all mowing speeds
- Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass
Cleanliness - for the mower and the operator
Accel Deep 48A Mower Deck
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
- There are few places to catch and hold material on top and underneath the deck.
- Top of deck stays cleaner, reducing time and effort needed for cleaning and service
- Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
- Less need to clean and remove buildup of material from underside deck
- The depth of the Accel Deep Mower Deck minimizes the amount of material that escapes from the front of the deck
- Limited amount of material to drift onto the operator and mower deck
- Even for material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
- Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.
Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:
- The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
MulchControl option
The MulchControl system for the 48A Mower Deck is an optional field-installed attachment and makes mulching practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge the lawn material. Advantages of mulching grass clippings include:
- A beautiful looking lawn
- Grass clippings not blown onto the operator, driveways, or flower beds
- Less fertilizer use
- Elimination of the effort needed to dispose of clippings
Mower wash port
Mower wash port with hose connector
A wash port is provided to make cleaning the underside of the mower deck easy.
- Hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket
Mower wheels are double captured
The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
- Stamped from strong 10-gauge, 0.135-in. (3.4-mm) steel
- Ribs in the deck shell add strength where it is needed.
- The 48A has a 23 percent heavier overall weight than the Edge™ Xtra 48-in. (122-cm) Mower Deck used on previous machines.
Mower wheels are double captured:
- Provides greater strength and durability for longer, trouble-free life.
- Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.
Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.
The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.
Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
Versatility - easy to change between side discharge and mulch modes
The 48A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:
- With MulchControl, changing from side discharge to mulching or vice versa is done with the simple flip of a lever.
How MulchControl works
MulchControl baffle open (similar mower from X500 Series Tractor shown)
MulchControl baffle closed (similar mower from X500 Series Tractor shown)
MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl attachment includes baffles to control the flow of material under the deck.
- The MulchControl baffle, or divider, between the left and middle spindles is about halfway down. The height is designed to balance the mulching and side-discharge modes.
- When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
- When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl handle
- The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
- The operator is required to get off the machine in order to engage or disengage mulch mode.
- Changing from mulching to side discharge or vice versa takes only a few seconds.
MulchControl is well-suited to the following mowing situations:
- Usually mulch, but side discharge when grass gets too long
- Usually side-discharge, but would like to be able to close the chute to control clippings
- Always mulch a main lawn, but often side discharge secondary lawns
MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharge when needed.
While in the side-discharge mode, MulchControl still mulches about one-third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
NOTE: A rear bagger is not available for ZTrak Z355E, Z355R, Z365R, or Z375R.
Operator station (Z335E shown)
Color-coded controls are easy to identify
Low fuel warning light illuminated
The operator station is designed for operator comfort and convenience when operating all controls:
-
Excellent visibility forward and to the trim side of the deck makes operation easy and comfortable for the operator.
-
Controls are color coded for easy identification.
-
Low-fuel warning light is easily visible in daylight.
-
Twin-lever controls adjust, using cut-height pin/socket, for convenience and operator comfort.
-
A shock absorber dampens motion control lever movement to give smooth operation.
Comfortable seat
Comfortable seat (Z335E shown)
Comfortable seat (Z355E shown)
Comfortable seats make the operator experience more pleasant. Armrests, included on the Z355E seat, can be flipped up out of the way, if desired:
-
Z335E – 15-in. (38-cm) high seat back without armrests
-
Z355E – 15-in. (38-cm) high seat back with adjustable armrests
Comfortable seat (Z345M shown)
- Z345M – 18-in. (46-cm) high seat back with adjustable armrests
Seat suspension
Seat suspension springs
Making seat fore-aft adjustment (Z335E)
Two steel coil suspension springs under the seat absorb shocks when traveling over rougher areas to provide a smoother ride.
The seat has a 2.5-in. (6.35-cm) fore-aft adjustment. The cut-height pin/socket can be used to loosen the bolts in order to make seat adjustments.
Cup holder and storage compartments
Cup holder
The cup holder is designed to hold two common cup sizes securely.
Storage compartment with cover located under seat
Open storage on left side of vehicle
Open storage on left side of vehicle
Covered storage under the seat and open storage along the left side of the vehicle provide safe and secure places for the operator to keep safety equipment, a cell phone, etc.
Operator foot platform
Comfortable operator's platform
Large foot platform helps the operator remain comfortable and secure:
- Volcano grips give a secure grip.
- Raised footrests at the front of the platform provide a comfortable area for the operator's feet.
Service interval decal (Z300 Series shown)
A convenient service interval decal provides basic maintenance information. It provides a quick reference for keeping recommended service up to date.
Quick response (QR) codes link to owner information web pages
Example product identification number (PIN) label with QR code
John Deere riding lawn mowers are supported by owner information web pages that include links to:
- Safety and how-to videos
- Operator’s manuals
- Parts catalog
- Maintenance reminder sheets
- Attachments
- Warranty statements
To To speed access to owner information web pages, a QR code is printed onto a PIN label located under the seat on the battery cover. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.
Mower deck access
Footrest easily removed for access to mower (Z335E shown)
Footrest removal bolt and hand grip (Z335E shown)
The footrest area is hinged and easily raised for service to mower deck:
- It is necessary to remove just one bolt that can be conveniently removed with the lift-height pin.
-
Easy to clean grass off the top of the mower
-
Provides convenient access to the mower drive
Loosening bolt to remove platform for access to mower deck
Footrest opens for access to mower deck
Engine service
Z335E engine
Z335E engine oil and fuel filters shown
The engines are easy to service, including changing the oil and the oil filter and servicing the air filter.
Replaceable fuel filter and oil filter (Z365R shown)
The Z365R engine has the John Deere Easy Change™ 30-second oil change system.
Accel Deep Mower Deck
Accel Deep™ Mower Decks have several features that make them easy to service:
- Flat-top design minimizes places for debris to collect.
- Spring-loaded, flip-up belt guards make removing debris easy.
- Provision is provided for a standard, 3/8-in. (9.5-mm) ratchet wrench to be used for releasing belt tension when removing the drive belt.
Tie-down locations are provided for convenience and safety when trailering the machine.
Motion-control levers
Operator using motion-control levers
Adjustable motion-control levers
The motion-control levers can be adjusted to two height settings and nine fore-aft settings for a total of 18 different positions:
-
Increased operator comfort
-
Adjustable for more precise control of the machine
Shock absorber for motion-control levers
Cut-height pin doubles as tracking adjustment tool
A standard shock absorber for the motion-control levers makes maneuvering ZTrak™ Mowers easy and comfortable:
-
Shock absorber modulates the movement of control levers for smoother operation.
-
Operator can smoothly and precisely control the machine.
On-board tracking adjustment from the operator seat is quick and easy. The cut-height pin includes a 13-mm wrench and doubles as a convenient tool for adjusting tracking and the motion-control lever position.
Control panel
Control panel (Z335E shown)
Low fuel warning light illuminated
The operator control panel is conveniently located and easy to use. The following instruments and controls are included:
- Hour meter
- Low fuel warning light
- Ignition switch
- Power take-off (PTO) control
- Engine speed/choke control
- A choke position is built into the engine speed control.
Park brake
Park brake
The park brake is conveniently located:
- Large lever is easy to use.
- Lever is color-coded for easy identification.
- Park brake effectively holds the machine in the parked position.
- Park brake must be engaged (in the upper position) to start the engine.
- Once the engine is started, the park brake must be disengaged before operating the motion-control levers.
Mower deck lift/cut-height adjustment
Mower deck lift/cut-height adjustment
Mower deck lift/cut-height adjustment in place
- Mower deck cutting height adjusts from 1 in. (2.5 cm) to 4 in. (10.2 cm) in 0.25-in. (0.64-cm) increments for excellent cut quality and performance.
- Mower deck adjustment has built-in memory so the operator can easily return to the desired cutting height after raising the deck.
Steering is easy with large diameter front caster wheels
Motion-control levers shown on Z335E
Shock absorber dampens movement of control levers
Motion-control levers are designed for comfortable and easy operation.
A shock absorber is included to dampen the movement of the control levers so any operator can make smooth, controlled turns.
Front caster wheel (Z335E)
Pneumatic caster wheels give a smoother ride and easier steering:
- Large diameter front caster wheels provide extra ride comfort and better steering control.
- Caster wheels have sealed bearings for long life and easy steering.
- Tires are sized for the size and weight of the vehicle.
| ZTrak model | Caster wheel tire size |
| Z335E, Z345M, Z345R | 11x4.0-5 |
| Z355E, Z355R, Z365R, Z375R | 13x5.0-6 |
Controls are designed to promote safe operation
- Park brake must be engaged for the engine to crank.
- Motion-control levers must be in the outward position for the engine to crank.
- Park brake must be disengaged before operating the motion-control levers or the engine will stall.
Interlock switch is located under the seat (Z345M shown)
- Seat interlock switch disengages the mower when the operator leaves the seat.
- Engine will stall if the operator leaves the seat without the motion-control levers in the outward position and the park brake set.
ZTrak™ Z335E shown
ZTrak Mowers are designed around a heavy-duty formed and welded steel frame for strength and reliability.
Large front caster wheels and large rear drive wheels provide several operator benefits:
-
Smoother ride
-
Better slope performance
-
More operator comfort over uneven ground
-
Better traction
The operator platform is roomy and uncluttered for maximum comfort, and the controls are convenient to use:
- Easy to get on and off the mower
- Ample legroom for comfortable operation
- Adjustable motion-control levers for height and position, enabling the operator to stay comfortable while using them
- Color-coded and logically placed controls
Styling is both functional and attractive
ZTrak Z335E
The styling of ZTrak Mowers is functional and attractive to appeal to residential owners who value product appearance and the easy, comfortable operation that comes with thoughtful control designs:
-
Color-coded controls are not only attractive, but easy to find and use.
-
Large foot platform, surrounded by frame rails, has a safe and inviting appearance and provides easy access for the operator.
-
Contoured shape of the fenders provides improved visibility to the drive tires, minimizes storage space required, and adds to the stylish appearance of the vehicle.
Heavy-duty welded steel frame for reliability and long life
Heavy-duty frame tubing
ZTrak mower frame
The ZTrak frame includes 1- x 1.5-in. (2.5- x 3.8-cm) steel tubing for long-term durability:
-
Heavy-duty frame tubing provides a solid support.
-
Reinforced frame offers additional strength where needed.
Loosening bolt to remove platform for access to mower deck
Footrest opens for access to mower deck
Electric PTO switch
A heavy-duty electric PTO clutch is controlled by a convenient, dash-mounted control.
Heavy-duty PTO clutch
PTO clutch
The PTO clutch is designed to operate through many on/off cycles.
Hydrostatic transmissions set low in vehicle
Hydro-Gear transmissions
Dual transmissions efficiently power the ZTrak™ mower forward and reverse and give steering capability:
- Transmissions are set low in the vehicle for excellent hillside stability.
Hydro-Gear® transmissions are reliable and durable.
- Beefed-up 1-in. (2.5-cm) axles for greater strength
- Maintenance-free unitized transmissions are sealed and have no hose connections to leak hydraulic fluid.
Hydro-Gear EZT transmission
Tow-valve control (left side shown)
Four-bolt hubs provide a reliable and convenient wheel-mounting system.
Tow-valve controls are provided for each transmission and located above the vehicle frame on either side of the engine:
- Easy to reach and use
- Allow the vehicle to be moved without the engine running
Hydro-Gear is a trademark of Hydro-Gear Limited Partnership AF Holding Company, a Delaware Corporation and Danfoss Power Solutions (US) Company, a Delaware Corporation.
Fuel tank location
Fuel-fill cap
The fuel tank holds 2.1 U.S. gal. (8 L) of fuel. It is located low on the left side of the machine:
- Fuel-fill opening is located low and angled for easy refueling.
- Large, 2-in. (5.1-cm) fuel-fill opening reduces the chance of spilling when adding fuel.
- Cap is tethered to the fuel tank.
- Less chance of fuel cap getting lost
Low fuel warning light
Low fuel warning light illuminated
The low fuel warning light is clearly visible in daylight.
MowerPlus home screen
MowerPlus maintenance screen
Overview
Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.
Benefits
- Engine hours, fuel level, and battery health (as compatible)
- Mowing history with time, distance, area, and speed
- Current day and five-day weather forecast based on location
- Walk-through setup guides
- Expert mowing tips
- Useful attachments for future purchase
- Periodic maintenance reminders
- Safety instructions
To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.
MowerPlus Hour Meter Connector
MowerPlus Deluxe Smart Connector, with a phone
Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.
BUC10510 MowerPlus Hour Meter Connector is for use with:
- Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
- Model year 2015 to 2020 S240 Tractors (serial number -880,000)
- S100, S110, S140, and S220 Tractors
BUC10929 MowerPlus Deluxe Smart Connector is for use with:
- All S120, S130, S160, S170, and S180 Tractors
- Model year 2021 and newer S240 Tractors (serial number 880,001-)
- Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)
BUC10537 MowerPlus Smart Connector is for use with:
- Model year 2016 and newer Select Series X300 and X500 Tractors
All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.
MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.
Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.
Additional details
MowerPlus connectors (sold separately)
Specifications
Compare the specifications of up to 4 models
| Key Specs | z355e-ztrak-mower Current Model |
|---|---|
| Engine power | 22 hp 16.4 kW |
| Engine model number | M44 Intek |
| Forward speed | 0-7 mph 0-11.3 km/h |
| Front caster tires | 13x5-6 |
| Drive tires | 20x9-10 |
| Seat back height | Medium back with armrests, 15 in. 38.1 cm |
| Width of cut | Accel Deep™ mower deck, 48 in. 122 cm |
| Mulching system | Optional MulchControl™ attachment |
| Warranty | 2 year or 120 hour bumper-to bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| Engine | |
| Power | 22 hp 16.4 kW |
| Model number | M44 Intek |
| Displacement | 44.2 cu in. 724 cc |
| Cylinders | V-twin |
| Lubrication | Full pressure with replaceable filter, capacity, 2 U.S. qt 1.9 L |
| Type | Overhead valve |
| Battery | 12 V 300 CCA |
| Choke/speed control | Single lever |
| Cooling method | Air |
| Fuel tank capacity | 2.1 U.S. gal. 7.9 L |
| Fuel gauge | Low-fuel light |
| Drive train | |
| Dual hydros | Hydro-Gear EZT with 1-in. (2.5-cm) axles |
| Travel speed | |
| Forward speed | 0-7 mph 0-11.3 km/h |
| Reverse speed | 0-3.5 mph 0-5.6 km/h |
| Speed and direction control | Twin levers |
| Control adjustment | 2-height/9-fore-aft, 18 positions |
| Chassis | |
| Frame | Heavy-duty frame tubing |
| Primer/paint | E-coat/powder |
| Front caster tires | 13x5-6 |
| Front caster bearings | Sealed ball bearings |
| Drive tires | 20x9-10 |
| Hour meter | Yes |
| Service interval decal | Yes |
| Storage compartment | Yes |
| Cup holder | Yes |
| Seat | |
| Seat back height | Medium back with armrests, 15 in. 38.1 cm |
| Fore-aft adjustment | 2.5 in. 6.35 cm |
| Seat suspension | Two springs |
| Lift system | |
| Type | Hand lever with optional foot lift |
| Mower cut height | 1-4 in. 2.5-10.2 cm |
| Cut height increments | 0.25 in. 0.64 cm |
| Preset cut height | Yes |
| Mower deck | |
| Width of cut | Accel Deep™ mower deck, 48 in. 122 cm |
| Type | Side discharge |
| Mower deck material | 10 gauge 0.135 in. 3.4 mm |
| Mower drive system | V-belt |
| PTO | |
| Type | Electric, 105 lb-ft 142 Nm |
| Drive | V-belt |
| Dimensions | |
| Wheelbase | 47.5 in. 121 cm |
| Overall length | 72.2 in. 183.5 cm |
| Width without mower | 44 in. 111.9 cm |
| Width with mower | 62.6 in. 158.8 cm |
| Width with mower (deflector raised for storage) | 54 in. 137 cm |
| Height | 36.3 in. 92.2 cm |
| Weight | With mower and fuel, 570 lb 259 kg |
| Operation | |
| Rollover protective structure (ROPS) | No |
| Slope operating limit | 13 degrees |
| Operator presence system | Yes |
| Park brake interlock | Yes |
| Operator video | Yes |
| Buyer's notes | |
| Note 1 | Mower wash port makes cleaning the deck easier |
| Note 2 | Flip-up foot platform for easy service access |
| Note 3 | 18-position adjustable motion-control levers |
| Warranty | 2 year or 120 hour bumper-to bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| Optional attachments | |
| Mulching system | Optional MulchControl™ attachment |
| Rubber floor mat | Yes |
| Sun shade | Yes |
| Mounted sprayer | Not available |
| Storage cover | Yes |
| Light kit | Dual headlight kit |
| Material collection system | Not available |