X350 LAWN TRACTOR 42 IN

Lawn Tractor with 42-inch Deck
x300-series

668

21.5-hp (16.0-kW)* iTorque™ Power System
42-in. Accel™ Deep Deck, compatible with optional MulchControl™ kit with one-touch technology
Twin Touch™ forward and reverse foot pedals
4 year/300 hour bumper-to-bumper warranty

$ 3,999.00 MSRP

PLUS ADDITIONAL CHARGES

Apply For FinancingBuy OnlineMaintenance Plans
View Product Brochure
60 Day Promise

Features

Engine is smooth-running and reliable V-twin air-cooled design

21.5-hp (16.0-kW) V-twin engine

The tractor is powered by a John Deere iTorque power system, a combination of engine features and an exclusive hood design that provides superior lugging ability, even cooling, and durability.

Key engine features include:

21.5 hp (16.0 kW)
Large 44.3 cu in. (726-cc) displacement
V-twin air-cooled design that provides smooth, quiet power
Quality features include:
- Cast-iron cylinder liners
- Overhead valves
- Full-pressure lubrication
- Replaceable oil filter
- Dual-stage air cleaner
V-twin design:
- Excellent power and performance
- Easy starts
- Smooth operation

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

12-amp charging capacity
Regulated to keep the battery at full charge without risk of overcharging

Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity

Fuel tank

Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
- Located on the left fender
- Helps eliminate spillage
Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.

42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile

X354 with Accel Deep 42A Mower Deck

Accel Deep 42A Mower Deck

The 42-in. (107-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
- Optional lever-action or electric one-touch MulchControl™ system for superior mulching performance and versatility
Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
Mower deck suspended from the vehicle for a smooth and level cut
- Adjustable mower wheels, positioned just above ground level, help reduce scalping
0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
Compatible with efficient 7-bu (247-L) two-bag cut-and-throw material collection system
For use on X330, X350, X354, and X370 Tractors

Excellent cut quality

42A Mower Deck top

42A Mower Deck underside

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
- Helps maintain excellent cut quality at faster mowing speeds
Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.
Exact Adjust deck-leveling system allows for easy and accurate leveling of the mower deck

Productivity - gets the job done fast

Side-discharge chute on Accel Deep 42A Mower Deck

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:

Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening

Cleanliness - for the mower and the operator

Accel Deep 42A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

There are few places to catch and hold material on top and underneath the deck.
- Top of deck stays cleaner, reducing time and effort needed for cleaning and service
- Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
- Less need to clean and remove buildup of material from underside deck
The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck
- Limited amount of material to drift onto the operator and mower deck
- Even flow of material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
- Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

The flat-top design reduces places for material to build up and makes material that does collect easy to remove.

Mower wash port

Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

Hose connector is included with the mower deck.

Superior durability is designed in

Hinged spindle pocket cover on the 42A Mower Deck

Mower deck wheels are double captured for durability

The 42A Mower Deck has strong spindle pockets to keep the blades aligned, even after years of tough service:

Ribs in the deck shell add strength where it is needed.
The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) Mower Deck.

Mower wheels are double captured:

Provides greater strength and durability for longer, trouble-free life.
Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.

Rolled outer edge of the deck provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility - easy to change between side discharge, mulch, and bagging modes

Rear MulchControl baffle (A) that must be removed for bagging

Rear MulchControl baffle removed to allow for chute installation

The 42A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
The cut-and-throw rear bagger can be used with MulchControl by removing the rear MulchControl baffle (A) before installing the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

7-bu (247-L) rear bagger

Optional rear bagger

Lower chute installed

An optional 7-bu (247-L) cut-and-throw rear bagger material collection system (MCS) is available for use with the 42-in. (107-cm) Accel Deep Mower. It provides an efficient means of collecting grass clippings and leaves.

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:

7-bu (247-L) capacity
Easy-to-attach lower chute (ordered separately)
Air exhaust duct
Convenient spring-latch
Airflow fill indicator
Quik-Tatch mounting
Sealed hopper top
Loose-knit bags available

Mower blades

Mower blades shipped with the rear bagger chute

High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

High-lift bagging blades also work well when side discharging material.

Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging in most conditions.

Mower blade use chart

Mode(s) of operation	Mower blade
Side discharging mode only	Side-discharge blade (shipped with mower)
Bagging mode only	Bagging blade (shipped with rear bagger chute)
Mulching mode only	Mulching blade (shipped with MulchControl)
Side discharge and mulching	Mulching blade (shipped with MulchControl)
Side discharge and bagging	Bagging blade (shipped with rear bagger chute)
Side discharge, mulching, and bagging	Mulching blade (shipped with MulchControl)

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

The warranty is hassle free, with one company handling all the paperwork.
Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

MulchControl™ system provides superior mulching performance and rapid conversion

Lever-action MulchControl lever (shown on 48A mower deck)

Electric one-touch MulchControl switch

The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

Creates a beautiful looking lawn
Smaller grass clippings disappear into the lawn canopy
Reduces fertilizer needs
Grass clippings are not blown onto the operator, driveways, or flower beds
No need to dispose of bags of clippings

How MulchControl works

MulchControl baffle open (shown on 48A mower deck)

MulchControl baffle closed (shown on 48A mower deck)

MulchControl is an innovative, simple design that is easy to use and maintain:

The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

For operators who usually mulch, but side discharge when grass gets too long
For operators who usually side discharge, but would like to close the chute to control clippings in some areas
For operators who always mulch a main lawn, but often side discharge secondary lawns
For operators who collect clippings but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings.

Electric one-touch MulchControl

Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

Electric one-touch MulchControl switcht

Electric one-touch MulchControl actuator (shown on 42A mower deck)

Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

When approaching driveways or flower beds where clippings would be undesirable
When a breeze blows clippings back onto the operator
For side discharge mowing only the areas of the property where grass is too thick for mulching
With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching

MulchControl limitations

While in the side discharge mode, MulchControl still mulches about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn cleanup is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

When bagging with MulchControl on a 48A or 54A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.

Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

MulchControl compatibility

Each MulchControl system is an optional field-installed attachment and includes everything needed: baffles, mulch blades, a handle (lever action attachments) or an actuator, wiring, and switches (electric one-touch attachments).

Lever-action MulchControl attachments

Attachment	Description	Applications
BUC10704	42-in. (107-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
BUC10705	48-in. (122-cm) Accel Deep MulchControl (lever action)	S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BUC10706	54-in. (137-cm) Accel Deep MulchControl (lever action)	Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers

Electric one-touch MulchControl attachments

Attachment	Description	Applications
BUC10164	42-in. (107-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 Series Tractors*
BUC10165	48-in. (122-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors*
BUC10166	54-in. (137-cm) Accel Deep electric one-touch MulchControl	Model year 2016 and newer X300 and X500 Series Tractors*

*NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Snow removal is a strength of lawn tractors

44-in. (112-cm) Front Blade

Snow blower, weather enclosure, and chains on an X300 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

44-in. (112-cm) Snow Blower
44-in. (112-cm) Front Blade
48-in. (122-cm) Front Blade (X394 Tractor only)
Tire chains or TerraGrip traction belts
Weather enclosure (available for all X300 Series, except the X350R)
Weights

Steering is low-effort sector and pinion system

Tight turning radius

Designed for easy turns

A heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:

Small, 16-in. (40.6-cm) turning radius provides excellent maneuverability
Tight turning ability improves mowing efficiency

Easy steering

Easy steering is important for an enjoyable mowing experience:

Large, 14-in. (36-cm) diameter steering wheel for improved leverage
Large sector gear for improved (higher) steering ratio
- A higher ratio equals lower steering effort
Dual drag links to help equalize the steering loads and reduce steering error
Ball joints on both ends of the steering tie rods for long life
Long steering arms to improve the mechanical advantage of the steering system through the full range of motion
Sector gear that pivots on a shaft rather than a bushing to ensure proper gear mesh and eliminate binding
Greaseable front steering spindles to reduce friction and improve wear over time

Integrated hydrostatic transaxle efficiently transmits power to wheels

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)

Kanzaki K58 transaxle (X380, X384, X390, X394)

The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.

Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

Use of the latest valve designs has significantly reduced the sound level.
Large pump and motor rotating groups ensure long life and efficient operation.

Freewheeling valve

A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Controls and display functions are easy to identify and convenient to use

X350 Tractor mowing

Steering wheel and controls (switch turned on to show display)

Controls

The contoured dash has clean, attractive styling and ergonomic controls for easy use:

Controls are color coded and labeled with English words for easy identification by the operator.
Controls are logically placed and easy to reach.
The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
The reverse implement option (RIO) switch is a yellow button.
The latch control on foot-lift models and hydraulic-lift control on power-lift models and the park brake latch are pivot levers for low effort.
Cruise control activation is handled by an automotive-style button.
Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
- The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
Functional design of the throttle and choke controls provides good appearance and a comfortable feel.

Display panel

Display panel illustration with descriptions

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

Display features dark-cockpit design to minimize operator distractions.
Display is back lit for night visibility.
- Night visibility is especially useful with snow blower use.
Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
Electronic fuel gauge provides real-time fuel level information.
- The X350R has a low fuel light, rather than a fuel gauge, to provide the operator with a noticeable warning when low on fuel.
A tachometer graphically displays engine speed.
- Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
An indicator tells the operator when the PTO is operating.
Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
- Damage can be prevented and repair costs can be reduced by addressing problems early.
Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
- The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
Operators are advised if battery voltage is low, normal, or excessive.
The service indicator light illuminates to indicate a diagnostic error code is stored.
- Onboard diagnostics provides trouble codes for use by trained technicians.
  - For example, a technician can test switch functionality and circuit continuity without tools.

Twin Touch™ foot control

Twin Touch foot control

Cruise control

Twin Touch foot pedals control the speed and direction of travel:

Automotive-type accelerator control ensures easy operation.
Operator can change direction without lifting foot off the platform.
Large pedal surface gives superior operator comfort.

Cruise control

Cruise control is standard equipment:

To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.

Mower deck height adjustment

Cut height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

Provides mower cut heights in 0.25-in. (0.64-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
Returns the mower deck to the same preset height each time it is lowered

Storage tray under tractor seat

Exact Adjust tool is used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat:

Exact Adjust ports on the fender deck allow for easy and accurate leveling of the mower deck for optimum mowing performance.

Deck-leveling gauge placed under deck

Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.

Foot-pedal lift system

Pushing with the foot to raise the mower or implement is less strenuous for many operators than using a hand-lift lever:

The easy-to-use raised position lock operates similarly to the park brake lock.
The foot pedal is out of the way and not likely to catch on bushes and tree limbs when mowing.
The mower deck returns to the same preset height each time it is lowered.

Adjustable lift-assist spring

Lift-assist spring decals and adjusting bolt

Close-up of lift-assist spring decal

NOTE: The adjustable lift-assist spring is standard equipment on tractors with manual foot-lift system that are shipped with the 48-in. (122-cm) and 54-in. (137-cm) side-discharge mowers, and an option for tractors shipped with 42-in. (107-cm) mowers. It is a recommended option for foot-lift tractors sold with the 42-in. (107-cm) mulch mower.

Lift-assist spring is provided on tractors shipped from the factory with a 48-in. (122-cm) or 54-in. (137-cm) side-discharge mower deck, except models with hydraulic lift, and a recommended option for tractors equipped with a 42-in. (107-cm) mulch mower to minimize lift effort.
- A spring-assist kit is available for other models for use with front equipment.
Lift effort can be easily adjusted by turning a bolt, located on the tractor front bumper, for optimum performance, depending on the equipment used (mower, front blade, snow blower, etc.).
The mower will not be inadvertently locked in the raised position when mowing through ditches.
When installing or removing a mower or front equipment raised by the foot-lift system, spring tension may be removed from the connection points by pulling rearward on the lift pedal and raising the lift latch to hold the pedal in the rearward position.

Parking brake control

Parking brake

Depressing the brake pedal applies internal wet-disk brakes, which provide better reliability and longer life than external brakes, for safe stopping.

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Electric PTO clutch is easy and convenient to use

Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch

PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

RIO

Reverse implement switch

Mower engagement PTO switch

Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

Carefully check the area around the machine.
Disengage the mower before backing up.

NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

Stop forward travel. Allow attachment to run.
Look down and behind the machine to be sure that there are no bystanders.
Push and hold in the reverse implement switch while depressing the reverse pedal slightly.
NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
Resume forward travel. The attachment should continue operating.
Repeat procedure to position the machine again.

Frame is reliable heavy-duty welded steel

Welded, heavy-duty frame

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.
- Weight bracket is built into the frame of two-wheel-steer models.
- Four-wheel-steer models require the optional weight bracket.

Front axle and wheel spindles are heavy-duty

Cast-iron front axle

Front axle is made of nodular cast iron:

Cast-iron front axle is strong and shock resistant.
Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

The bushing provides excellent wear resistance.
Grease fittings at each spindle are easy to service.

Front steering spindles

Steering spindle

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

Have strength to handle heavy implements
Provide long life at bearing surfaces
Use sealed precision bearings in front wheels

Rear equipment-mounting system is heavy-duty and easy to use

Rear equipment mounting system

A heavy-duty equipment mounting system is used:

Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
Easily attach optional equipment to the tractor
Can bear the load of heavy rear-mounted equipment, such as material collection systems

Modern styling with functional design enhances appearance and performance

Attractive styling

Hood air-intake louvers

Smooth, rounded contours present a modern, styled appearance:

Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.
- Cooler engine operation
- Lower operator station sound levels
Hot air is vented out the front grille, away from the operator.
The fully enclosed hood is made of molded-in-color material.
- Reduces sound
- Will not rust or dent
Distinctive grille and large, one-piece fender deck complete the styling package.

Two high-quality headlights give excellent visibility

Optimum lighting pattern

Headlights are standard equipment on all models:

Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
A headlight position on the ignition switch makes it easy to operate the headlights.
The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Operator station is comfortable and convenient

Operator station

The operator station is designed for operator comfort and ease of using controls:

A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
Full-length foot mats provide comfort for the operator and protect the footrest area.

Comfortable seat

Comfortable open-back seat

An open-back 15-in. (38-cm) high-back seat provides a comfortable, smooth ride and good support for the operator:

Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls.
Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
Open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride.
Grasp at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.

Adjustable seat suspension

Seat suspension with springs in rear position

Seat suspension with springs in forward position

The seat suspension is adjustable, without tools, for the weight of the operator:

Springs are adjustable fore and aft to any of three positions.
- No tools required
- Allows fine-tuning of the suspension for the operator's weight
- Back position for more support for heavier operators
Tool tray is designed into the seat base.
- Can be used to store gloves, small tools, etc.
- Provides storage location for Exact Adjust tool and deck-leveling gauge

Cup holder and toolbox

Cup holder and covered toolbox on fender

Covered toolbox with open cover

A cup holder and covered toolbox are located on the fender for operator convenience:

The cup holder holds a variety of container sizes.
Toolbox provides convenient storage.
- Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.
Cup holder and toolbox are constructed of durable acrylonitrile butadiene styrene (ABS) plastic.

Removable plug for optional 12-V outlet

Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

Convenient for plugging in cell phone charger and other electric devices
- Can be used to operate electric rear equipment, such as a sprayer or spreader

12-V fast connector

Fast connector location

A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:

The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

Serviceability is convenient with easy-open hood

One-piece hood is easy to open

Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

Important service points are located within easy reach.
A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.

Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

Quick response (QR) codes link to owner information web pages

Example product identification number (PIN) label with QR code

John Deere riding lawn mowers are supported by owner information web pages that include links to:

Safety and how-to videos
Operator’s manuals
Parts catalog
Maintenance reminder sheets
Attachments
Warranty statements

To speed access to owner information web pages, a QR code is printed onto a PIN label located under the hood on trim side of the steering pedestal. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy

Deck-leveling gauge and hex adjusting tool stored under tractor seat

Exact Adjust access holes

A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.

Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

There is no need to reach under the fender deck while making the mower-level adjustment.
Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
- Level the mower deck side to side
- Set the correct amount of rake (front-to-back deck orientation)
- Calibrate the cutting height to the cut-height adjusting knob setting
Exact Adjust simplifies leveling the mower deck if equipped with a Power Flow™ blower.
- To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.

Deck-leveling tool placed under deck

Using included ball-hex tool to level mower deck

Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

Park the tractor on a level surface.
Inflate tires to the correct pressure.
Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.

Cut height adjusting knob

Set mower cutting-height knob to the correct deck-leveling position.
Adjust mower wheels as necessary so they do not contact the ground surface.
Remove the onboard deck-leveling gauge that is located under the seat.
Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.
- Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
Adjust mower deck front-to-back level, if necessary.
- Loosen rear nuts equally on each side of front lift rod.
- Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
- Tighten rear nuts after adjustment is complete.
Return the gauge to its storage position.

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

Help maintain your mower and lawn with the MowerPlus™ app and connector

MowerPlus home screen

MowerPlus maintenance screen

Overview

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Benefits

Engine hours, fuel level, and battery health (as compatible)
Mowing history with time, distance, area, and speed
Current day and five-day weather forecast based on location
Walk-through setup guides
Expert mowing tips
Useful attachments for future purchase
Periodic maintenance reminders
Safety instructions

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

MowerPlus Hour Meter Connector

MowerPlus Deluxe Smart Connector, with a phone

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

BUC10510 MowerPlus Hour Meter Connector is for use with:

Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
Model year 2015 to 2020 S240 Tractors (serial number -880,000)
S100, S110, S140, and S220 Tractors

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

All S120, S130, S160, S170, and S180 Tractors
Model year 2021 and newer S240 Tractors (serial number 880,001-)
Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

BUC10537 MowerPlus Smart Connector is for use with:

Model year 2016 and newer Select Series X300 and X500 Tractors

All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.

MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Additional details

MowerPlus connectors (sold separately)

Specifications

Compare the specifications of up to 4 models

Key Specs	x350-lawn-tractor-42-in Current Model
Engine power	21.5 hp 16 kW
Oil change	No-tools oil drain with replaceable filter
Engine manufacturer/model	FR651V
Transaxle type	K46 hydrostatic integrated with transaxle
Transaxle control	Twin Touch™ pedals
Rear tires	20x10-8
Lift system type	Foot pedal with optional adjustable spring assist kit
Cutting width	Accel Deep™ mower deck, 42 in. 107 cm
U.S. warranty	4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power	21.5 hp 16 kW
Displacement	44.3 cu in. 726 cc
Manufacturer/model	FR651V
Type	Overhead valve, full-pressure lube, oil filter
Cylinders	V-twin, cast-iron liners
Governor	Mechanical
Choke/speed control	Separate levers, automatic choke return
Cooling method	Air
Air cleaner	Dry, replaceable
Oil change	No-tools oil drain with replaceable filter
Fuel system
Type	Gasoline
Fuel delivery	Pulse pump, carburetor
Fuel gauge	Gauge on dash
Fuel tank location	Rear
Fuel fill opening	On left fender, 3 in. 7.6 cm
Fuel tank capacity	3.3 U.S. gal. 12.5 L
Electrical system
Battery	12 V 340 CCA
Charging system	Flywheel alternator, regulated, 12 amp
Engine starter	Bendix
Hourmeter	Yes
Headlights	Two standard, incandescent, 27 W
Taillights or reflector	No
Backup lights	No
Rear work lights	No
12-V outlet	Optional
Transaxle
Type	K46 hydrostatic integrated with transaxle
Control	Twin Touch™ pedals
Cruise control	Yes, button on dash
Oil cooler	Fins and fan on transaxle
Oil filter	Internal, not replaceable
Differential lock	No
Forward speed	0-5.5 mph 0-8.9 km/h
Reverse speed	0-4 mph 0-6.4 km/h
Brakes	Internal wet disc
Chassis
Frame	Welded heavy-duty
Primer/paint	E-coat/powder
Weight bracket	Standard rear, optional front
Receiver hitch	No
Front axle	Cast iron front axle, front wheel ball bearings
Spindle bushings	No
Front tires	15x6-6
Rear tires	20x10-8
Hood material	Fully enclosed, molded-in color material reduces sound, will not rust or dent
Fender deck material	Stamped steel
Floor mats	Sure-grip rubber
Storage	Yes, under seat and covered toolbox
Service interval decal	Yes
Fender handles/grips	No
Cup holder	Yes
Equipment mounting	Yes, heavy duty
Maximum towing capacity	600 lb 272 kg
Steering
Type	Manual, sector and pinion
Four-wheel steer	Not available on this model
Steering wheel	Large, 14 in. 35.6 cm
Tilt steering wheel	No
Turning radius	16 in. 40.6 cm
Uncut circle radius	26 in. 66 cm
Seat
Type	Open-back design with grasp
Seat back height	15 in. 38 cm
Armrests	No
Fore-aft adjustment	While seated, slide rail, 15-position, 6.6 in. 17 cm
Seat suspension	Tilt, two coil springs, three-position no-tools adjustment for operator weight
Lift system
Type	Foot pedal with optional adjustable spring assist kit
Hydraulic outlets	No
Mower cut height	13 positions, 1-4 in. 2.5-10.2 cm
Cut height increments	0.25 in. 0.64 cm
Preset cut height	Yes
Mower deck
Type	Side discharge
Cutting width	Accel Deep™ mower deck, 42 in. 107 cm
Construction	Stamped steel deck shell
Mower deck material	12 gauge 0.105 in. 2.7 mm
Mower wash port	Yes
Mower drive system	Electric power take-off (PTO) clutch, in-line belt
Mower wheels	Two
Mower wheel adjustment	Four-position, tool required
Mower level adjustment	Exact Adjust ports and onboard deck-leveling gauge
Mower attachability
Type	Slide under tractor
Front draft arms	Attached with spring pins at two points
Rear draft arms	Two pins and spring clips
Mower wheels rotate	No
Drive system	Single belt
Safety
Meets ANSI standard	Yes
Meets OPEI standard	Yes
Backup protection	Reverse Implement Option (RIO)
Safety video	Yes
Buyer's notes
Notes	Fully enclosed, molded-in color material reduces sound, will not rust or dent Durable E-coat primer and powder-paint finish
Warranty	4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers	42A (standard)
Rear bagger	2-bag, 7 bu 247 L
Mulching system	Yes, MulchControl™
Front thatcher	38, 46, 54 in. 96.5, 116.8, 137.2 cm
Front blade	44 in. 111.8 cm
Snow blower	Two-stage, 44 in. 111.8 cm
Sprayer	Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L Mounted, 25 U.S. gal.
Spreader	Tow-behind, 125 lb 57.7 kg Tow-behind, 175 lb 79.4 kg Mounted, 125 lb
Front bumper	Styled bumper option
Brush guard	Yes
Weather protection	Weather enclosure
Sun canopy	Yes
Bucket holder	Yes, double bucket
Grass striping	Lawn striping kit
Tractor shovel	40 in. 101.6 cm
Tow-behind tools	16
Dimensions
Height	46.1 in. 1171 mm
Overall length	71.5 in. 1817 mm
Wheelbase	49.4 in. 1255 mm
Width with mower	50.5 in. 1283 mm
Width with mower (deflector raised for storage)	51.2 in. 1300 mm
Width without mower	38 in. 964 mm
Weight	Mower, no fuel: 543 lb 246 kg

Accessories and Attachments

Carts

Utility Cart, 7P Poly - LP21935

7P Poly Utility Cart

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

7P Poly Utility Cart

The cart has a premium molded, high-density polyethylene box construction.
Compression molding process allows polyethylene to be the optimum thickness in all areas for superior strength and durability.
Polyethylene body will not rust or dent; it stays looking new longer.
0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
Styling is compatible with other John Deere equipment.
Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.

Wheels

7P Utility Cart wheel

Wheels are mounted on a solid, one-piece axle for durability.

Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

Good flotation
Minimal rolling resistance
Shock absorption

Sloped tailgate

Sloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch

Spring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

Tilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 8Y Convertible Poly - LP22755

8Y Convertible Poly Utility Cart, push mode

8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m³), 300-lb (136-kg) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

Compatible with riding lawn tractors and garden tractors
Durable poly construction
All-terrain pneumatic tires
Converts from tow cart to push cart without tools
Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 10P Poly - LPPCT10JD

10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

Large 650-lb (295-kg) capacity
10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
Will not dent or rust
15x6 tubeless pneumatic tires with turf tread for maximum traction
Easy, hands-free foot pedal dump release
Steep dump angle for complete emptying

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 13 Steel - LPHDC13JD

13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Welded box

Welded box construction provides maximum reliability:

Requires less setup time than the bolted construction.
Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.

Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

Good flotation
Minimal rolling resistance
Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch

Spring-pin tractor hitch

Tilt-dump latch

A large-diameter hitch pin provides plenty of strength:

Fast, easy attachment to the tractor hitch
Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

Steep dump angle makes emptying easier.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

Utility Cart, 16YS Swivel Poly - LP68186

16YS Swivel Cart

The 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

Key features include:

Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
800-lb (363-kg) capacity makes it durable enough for the heavy jobs
- 350 lb (158 kg) when using swivel feature to dump
Convenient foot pedal release for easy dumping
Molded stake pockets for enlarging the bed size

NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

16YS Swivel Cart

Order number: LP68186

Oilite is a trademark of Beemer Precision Incorporated.

Utility Cart, 17P Poly - LPPCT17JD

17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Key features of the 17P Utility Cart:

1,000-lb (454-kg), 17-cu ft (0.48-m³) load capacity.
Cart has premium molded polypropylene box construction.
Polypropylene body will not rust or dent, staying new-looking longer.
0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
Styling is compatible with other John Deere equipment.
16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
Wheels are mounted on a solid one-piece axle.
Wheels turn on iron/Oilite® bushings with grease fitting for long life.
Spring-loaded dump latch is easy to use.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

Utility Cart, 18 Steel - LPHDC18JD

18 Utility Cart

Everyone who owns a John Deere riding lawn and garden product is a potential user of a high-quality affordable utility cart.

Utility carts can be used to haul a variety of materials:

Firewood
Lawn debris
Sand
Dirt
Mulch
Garden tools
Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Durable box design

Bolt-together box

Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together.

Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart.

Convenient emptying of box

Tailgate

The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Model comparison chart

Comparison with similar models

Model	Order through	Box capacity (heaped)	Material thickness	Maximum weight	Vehicle compatibility
7P	Order Zone	7 cu ft (0.20 m³)	High-density polyethylene (HDPE)**	450 lb* (204 kg)	EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8Y	Order Zone	8 cu ft (0.22 m³)	HDPE**	300 lb* (136 kg) (tow)	100 Series, S240, X300 Series, X500 Series, X700 Series
10P	Order Zone	10 cu ft (0.28 m³)	Polypropylene	650 lb* (295 kg)	EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13	Order Zone	13 cu ft (0.37 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
16YS	Order Zone	17 cu ft (0.48 m³)	Polypropylene	800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump	100 Series, S240, X300 Series, X500 Series, X700 Series
17P	Order Zone	17 cu ft (0.48 m³)	Polypropylene	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
18	Order Zone	18 cu ft (0.51 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	100 Series, S240, X300 Series, X500 Series, X700 Series
21	Order Zone	21 cu ft (0.59 m³)	16-gauge, 0.06-in. (1.5-mm) steel	1,000 lb* (454 kg)	X700 Series

Specifications

	7P	8Y	10P	13	16YS	17P	18	21
Box capacity
Heaped	7 cu ft (0.20 m³)	8 cu ft (0.22 m³)	10 cu ft (0.28 m³)	13 cu ft (0.37 m³)	17 cu ft (0.48 m³)	17 cu ft (0.48 m³)	18 cu ft (0.51 m³)	21 cu ft (0.59 m³)
Struck	5.6 cu ft (0.16 m³)	6.6 cu ft (0.19 m³)	8.3 cu ft (0.24 m³)	10 cu ft (0.28 m³)	15 cu ft (0.42 m³)	14 cu ft (0.40 m³)	15 cu ft (0.42 m³)	15 cu ft (0.42 m³)
Maximum weight	450 lb* (204 kg)	300 lb* (136 kg)	650 lb* (295 kg)	1,000 lb* (454 kg)	800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump	1,000 lb* (454 kg)	1,000 lb* (454 kg)	1,000 lb* (454 kg)
Box dimensions
Width	33 in. (84 cm)	33.68 in. (85.5 cm)	30.3 in. (77 cm)	30.25 in. (76.8 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Length	45 in. (114 cm)	45 in. (114 cm)	44.5 in. (113 cm)	48 in. (122 cm)	58.5 in. (148.6 cm)	58.5 in. (148.6 cm)	48 in. (122 cm)	48 in. (122 cm)
Depth	10.5 in. (27 cm)	10.75 in. (27.3cm)	12 in. (30.5 cm)	12 in. (30.5 cm)	15.5 in. (39.4 cm)	15.5 in. (39.4 cm)	18 in. (45.7 cm)	11 in. (27.9 cm)
Box construction	Molded	Molded	Molded	Welded	Molded	Molded	Welded	Bolted
Material	High-density polyethylene (HDPE)**	HDPE** w/UV inhibitor	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	Polypropylene	Polypropylene	16-gauge, 0.06-in. (1.5-mm) steel	16-gauge, 0.06-in. (1.5-mm) steel
Tailgate	None, sloped	None, sloped	None, sloped	Hinged	None, sloped	None, sloped	Hinged	Lift-out/swing-out
Pneumatic tires	2 ply	---	2 ply	2 ply	4 ply	4 ply	4 ply	2 ply
Size	13x4-6	13x4-6	15x6.00-6	15x6.00-6	16x6.50-8	16x6.50-8	16x6.50-8	20x10.00-8
Tread design	Turf	Knobby	Turf	Turf	Turf	Turf	Turf	Turf
Recommended inflation pressure	30 psi (207 kPa)	30 psi (207 kPa)	14 psi (97 kPa)	14 psi (97 kPa)	35 psi (241 kPa)	28 psi (193 kPa)	28 psi (193 kPa)	10 psi (70 kPa)
Wheel bearings	Iron/Oilite	None	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Iron/Oilite	Ball bearings, double sealed
Grease fittings on wheels	Yes	None	Yes	Yes	Yes	Yes	Yes	None
Axle diameter	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	0.75 in. (1.905 cm)	1 in. (2.54 cm)	1 in. (2.54 cm)
Ground clearance	5.62 in. (14.3 cm)	5.25 in. (13.3 cm)	6.5 in. (16.5 cm)	6.5 in. (16.5 cm)	14.25 in. (36.2 cm)	14.25 in. (36.2 cm)	7 in. (17.8 cm)	8.25 in. (21 cm)
Width, overall	34 in. (86.4 cm)	33.68 in. (85.5 cm)	38 in. (96.5 cm)	38 in. (96.5 cm)	39.5 in. (100.3 cm)	39.5 in. (100.3 cm)	38 in. (96.5 cm)	48 in. (122 cm)
Hitch pin	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip	Pin/spring clip
Dump angles	55 degrees	55 degrees	56 degrees	31 degrees	46 degrees	46 degrees	35/40 degrees	35/40 degrees
Maximum tongue weight	100 lb (45.4 kg)	100 lb (45.4 kg)	70 lb (31.75 kg)	100 lb (45.4 kg)	50 lb (22 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)	100 lb (45.4 kg)
Shipping weight with carton	68 lb (31 kg)	65 lb (29.5 kg)	79 lb (35.8 kg)	110 lb (49.9 kg)	---	105 lb (47.6 kg)	170 lb (77.1 kg)	240 lb (109 kg)
Net weight	65 lb (29 kg)	55 lb (25 kg)	72 lb (32.7 kg)	105 lb (47.6 kg)	103 lb (47 kg)	105 lb (47.6 kg)	150 lb (68 kg)	220 lb (99.8 kg)

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

	7P	8Y	10P	13	16YS	17P	18	21
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665 ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R	X		X
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	X	X	X	X	X	X	X
S240	X	X	X	X	X	X	X
LT150, LT160, LT180, LT190, LTR180	X	X	X		X	X
LX280, LX280AWS, LX289	X	X	X		X	X
X300, X300R, X304, X310, X320, X324, X340, X360, X330, X350, X350R, X354, X370, X380, X384, X390, X394	X	X	X	X	X	X	X
SST15, SST16, SST18	X	X	X
G110	X	X	X	X	X	X
GT235, GT245	X	X	X	X	X	X
GX255, GX335, GX345, GX355	X	X	X	X	X	X
X500, X520, X530, X534, X540 X570, X580, X584, X590	X	X	X	X	X	X	X
X465, X475, X485, X495, X575, X585, X595	X	X	X	X	X	X	X	X
X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	X	X	X	X	X	X	X	X

Tractor	Additional weight
L100, L108, L110, L111, L118, L120, L130 102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180	Two 30-lb (14-kg) wheel weights, front Two 42-lb (19-kg) suitcase weights, rear
S240	Two 34-lb (15-kg) wheel weights, front (4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180	Two 34-lb (15-kg) wheel weights, front Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289 X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394	Two 34-lb (15-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18	One 88-lb (40-kg) weight kit, front Three 40-lb (18-kg) weights, rear
G100	Two 50-lb (23-kg) wheel weights, rear Two 42-lb (19-kg) suitcase weights, rear
G110	Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355 X500, X520, X530, X534, X540 X570, X580, X584, X590	Two 30-lb (14-kg) wheel weights, front Four 42-lb (19-kg) suitcase weights, front Four 42-lb (19-kg) suitcase weights, rear Four 50-lb (23-kg) wheel weights, rear Two 50-lb (23-kg) wheel plastic shell weights, rear
X465, X475, X485, X495, X575, X585, X595 X700, X720, X724, X728, X729, X740, X744, X748, X749 X710, X730, X734, X738, X739, X750, X754, X758	Four 42-lb (19-kg) suitcase weights, front Two 70-lb (32-kg) wheel cast-iron starter weights, rear Four 50-lb (23-kg) cast-iron wheel weights, rear Two 50-lb (23-kg) plastic shell wheel weights, rear Six 42-lb (19-kg) suitcase weights, rear

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

18 Steel Utility Cart
Order number: LPHDC18JD

Oilite is a trademark of Beemer Precision, Incorporated.

Drawbar

48mm (1 7/8-in.) hitch ball for ball-type hitch. Ball Mount sold separately. - PM05101

1-7/8-in. (48-mm) hitch ball

1-7/8-in. (48-mm) hitch ball attaches to drawbar or rear hitch to allow towing. 0.75-in. (19-mm) diameter post thread is provided.

The hitch ball is available through Parts.

Magnetic hitch pin - LP63768

Magnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

Strong magnetic grip
Rust resistant
Easy to install, secure fit

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Home Maintenance Kits

Home maintenance kit - LG265

LG265 home maintenance kit

Typical home maintenance kit

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

The LG265 home maintenance kit includes the following:

Quantity	Description
1	Engine oil filter
2	Engine oil quart
1	Fuel filter
1	Air filter element
1	Air filter element foam
2	Spark plug

Mcs Chutes

Rear bagger chute for 42A Mower - BG20754

7-bu (247-L) two-piece rear bagger chute

Upper chute with handle and full indicator

The rear bagger chute for the 42-in. (107-cm) Accel Deep™ Mower Deck (42A) is required for use of the two-bag, 7-bu (247-L) rear bagger:

The chute is a two-piece design to allow easy installation at the mower deck, without the rear of the chute being encumbered by the hopper.
A convenient handle is included on the top section of the chute to make installation and removal easier.
The top section of the chute slides into the flexible hose that is attached to the hopper and is held securely to the bottom section with an easy-to-use bungee cord.
A fill indicator tells the operator when the bags are getting full.

Major components included with bagger chute

Toe guard with chute-install features and front baffle installed

The rear bagger chute attachment includes special bagging blades, a toe guard (A) with features for installing the bagger chute, and a front bagger baffle (B) to direct the material rearward into the bagger chute:

The replacement toe guard is intended to remain on the mower deck and to be used for any mower application - bagging, side discharging, or mulching.
A baffle to narrow the side-discharge opening (where the bagger chute is installed on the mower deck) and direct the material into the chute is provided with the rear bagger chute and needs to be bolted underneath the deck at the front.
- This baffle may remain in place when the bagger chute is removed for side discharging material, however for ultimate side-discharge performance it could be removed.
- This front baffle included with the bagger chute attachment is not required if the mower deck is equipped with the MulchControl™ attachment. The MulchControl front baffle can remain with the gate open for bagging and serves the same purpose.

Chute front pin inserted in tube located at end of toe guard

Lower chute installed

Installing the chute is easy:

First, slide the front mounting pin into the tube that is on the front end of the toe guard.
Next, swing the chute toward the back and lock it in place at the rear.

Rear chute latch

Front mounting pin

The bagger chute is securely held in place at the front and rear to provide a tight seal between the mower deck and the chute.

The rear latch is adjustable to allow for the optimum setting for easy use and a tight seal.

When a mower deck is equipped with both the optional MulchControl attachment and a rear bagger

Rear MulchControl baffle (A) that must be removed for bagging

Rear MulchControl baffle removed to allow for chute installation

The operator's manuals provided with the rear bagger chute and the MulchControl attachment should be used as the primary guide, however these tips may be helpful to keep in mind:

Both the rear bagger chute and the MulchControl attachment come with a baffle that bolts inside the mower deck along the front edge to narrow the discharge opening, which has been optimized for side discharging material, and direct the material into the bagger chute.
- If the mower deck is equipped with MulchControl, the front bagger baffle included with the bagger chute is not used.
The front baffle, either the one included with the rear bagger chute or the one included with MulchControl (B), can remain in place for side discharging.
- For ultimate side-discharge performance this baffle can be removed.
The optional MulchControl attachment includes a rear MulchControl baffle (A), held in by two carriage bolts, at the rear edge of the discharge opening. This baffle:
- Must be removed for installation of the rear bagger chute, a 13-mm (0.51-in.) wrench is required (the bagger chute cannot be installed without removing this baffle)
- Can remain removed for side discharging material
- Must be re-installed for mulching

Mower blades

Mower blades shipped with the rear bagger chute

High lift bagging blades are included with the chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:

High-lift bagging blades also work well when side discharging material.

Mulching blades are included with the MulchControl attachment. They can be used for mulching, side discharging, and bagging in most conditions.

Mower blade use chart

Mode(s) of operation	Mower blade
Side discharging mode only	M170639 side-discharge blade (shipped with mower)
Bagging mode only	GX25668 bagging blade (shipped with BG20754 rear bagger chute)
Mulching mode only	M170642 mulching blade (shipped with BM24794 MulchControl)
Side discharge and mulching	M170642 mulching blade (shipped with BM24794 MulchControl)
Side discharge and bagging	GX25668 bagging blade (shipped with BG20754 rear bagger chute)
Side discharge, mulching, and bagging	M170642 mulching blade (shipped with BM24794 MulchControl)

Mcs Hoppers

7-bu (247-L) 2-Bag Hopper Assembly (X300/X500 M-T) - BM21679

7-bu (247-L) hopper (cut-and-throw)

7-bu (247-L) hopper (Power Flow™)

The 7-bu (247-L) hopper provides an efficient means of collecting grass clippings and leaves using either the cut-and-throw rear bagger or the Power Flow material collection system (MCS):

38-in. (97-cm) and 42-in. (107-cm) mower decks use the cut-and-throw system.
48-in. (122-cm) and 54-in. (137-cm) mower decks use the Power Flow system.

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags.

The 7-bu (247-L) MCS features:

7-bu (247-L) capacity
Easy-to-attach lower chute (ordered separately)
Handle on chute
Air exhaust duct
Convenient spring-latch
Airflow fill indicator
Quik-Tatch mounting
Sealed hopper top
Loose-knit bags available

Loose knit bag (1) for 7-bu Hopper - AM135486

Loose-knit bags

Close-up view of loose-knit bag material

A loose-knit bag is available as an option for use with 7-bu (247-L) cut-n-throw rear baggers and Power Flow™ baggers:

Two loose-knit bags are required.
The loose-knit bag allows more air to flow through and provide more complete bag filling in wet and heavy grass conditions.

MCS 7 Dump-from-Seat Hopper, X300 with 7-bu (247-L) Hopper - LP47168

Dump from the seat capability for X300 Series Tractors

MCS 7

The MCS 7 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere X300 Series Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere MCS, installation is a breeze with simple hand tools.

Features:

Lightweight aluminum construction
Designed for full material expulsion
Easy access self-latching spring tripped handle
Ships almost fully assembled (5 minute handle assembly)
Installs in seconds (after initial assembly)

Benefits:

Easy - Convenient Access to dump handle directly from seat
Clean - No material handling, no mess
Efficient - Unload and go without leaving the seat

NOTE: Fits John Deere X300 Series 2-bag material collection systems. Not compatible with EZtrak Zero-Turn Mowers or the X300R Rear Discharge Tractor.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

MCS 7 attachment
Order number: LP47168

Miscellaneous

12-V outlet kit (X300) - BM24915

12-V outlet

The 12-V outlet kit can be installed on the tractor to provide power for various 12-V equipment.

40-in. (102-cm) Tractor Shovel - LP63767

Tractor shovel in raised position

Tractor shovel in emptying position

The 40-in. (102-cm) Tractor Shovel expands the usefulness of any John Deere Select Series^TM X300 or X500 Multi-Terrain Tractor by allowing it to pick up and move material. It utilizes a high-capacity electric actuator that provides lift, lower, dump, and down force functions. No front blade is required.

The tractor shovel takes the back-breaking labor out of jobs like moving mulch, spreading gravel, ground grading, and more. It installs using the tractor's existing frame holes. After initial installation, it can be removed or installed without tools.

The innovative opening design of the tractor shovel, combined with the lift height, assures complete emptying of material. The tractor shovel can also be used for scraping and grading by locking the shovel in the raised position.

Tractor recommendations and requirements:

Rear tractor ballast recommended for improved traction
Tire chains recommended for moving snow
No tractor requirements

Key features:

Can be used when upper part of shovel is locked in the raised position as a blade (without angling capability)
Raised and lowered with electric actuator
Provides down force to increase scraping effectiveness of blade
Pick-up, transport, and empty a variety of loose material including soil, gravel, mulch, and snow
Can be removed in 10 minutes or less

Compatibility:

LP63767 40-in. (102-cm) Tractor Shovel is Compatible with:

Select Series X300, X300R, X304, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Unique shovel design

40-in. (102-cm) Tractor Shovel (with optional brush guard)

Shovel opens for emptying material or blading

The unique design of the 40-in. (102-cm) Tractor Shovel allows an operator who has a Select Series™ X300 Series (including X300R and X350R) or X500 Series Multi-Terrain Tractor to use the tractor shovel for lifting and moving material as well as for typical blade functions (without blade angling), such as blading, leveling, and scraping:

Unique shovel design empties material completely.
Shovel can be locked in the raised position for blading applications.

Operation

Operator station view

Control panel

The tractor shovel is operated from the tractor seat with the use of a control rod and an electric switch.

Electric actuator powers the tractor shovel

An electric actuator provides power to raise, lower, and empty the shovel.

To raise or lower the tractor shovel, use the electric switch on the tractor shovel panel.

Depress the bottom of the switch to raise the shovel and depress the top of the switch to lower the shovel.

Control rod for opening/closing of the shovel

Shovel in dump position

To open the shovel for emptying, raise it completely and then pull the control rod to the yellow area of the rod and press the upper end of the electric switch.

To close the shovel, press the lower end of the electric switch until the control rod releases to the black area of the rod.

Operation of the shovel for blading or leveling

Hand lift for locking into the blading position

Blading latch in the locked position

To use the tractor shovel for blading, use the handle on the right side of the shovel to raise it and then use the locking lever to lock it in the raised position.

Specifications

Length of tractor shovel	40 in. (101.6 cm)
Depth of tractor shovel	11 in. (27.9 cm)
Capacity	1.7 ft³ (48 L)
Cutting blade material	0.250-in. (6.4-mm) hardened steel
Material thickness, shovel	0.125 in. (3.2 mm)
Load capacity	150 lb (68 kg), evenly distributed
Lift height	4 in. to 6 in. (10.2 cm to 15.2 cm), depending on the tractor model
Shipping weight	110 lb (50 kg)
Warranty	One-year limited warranty on parts

Tractor compatibility and requirements

The 40-in. (102-cm) Tractor Shovel is compatible with the following tractors:

Select Series X300, X300R, X304, X310, X320, X324, X330, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Requirements and/or recommendations:

Rear ballast is recommended for best performance.
Tire chains are helpful and recommended when operating in snow.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tractor Shovel
Order number: LP63767

Battery charger and maintainer - TY25866

Battery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

Automatically determines if the battery is 6- or 12-V and adjusts accordingly
Helps maintain battery in good condition and ensures it is fully charged
Powers on to charge battery and powers off when fully charged
'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
1.5-amp trickle charges small batteries in 2 to 12 hours
Maintains large battery charges
Hookup protection guards battery and charger from damage

Includes a choice of battery connection methods:

Standard color-coded clips to connect to any battery
Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use

Bucket holder (double) - LPJD301

Double bucket holder (buckets ordered separately)

Transporting mulch, plants or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Ultimate™ Series Tractor. It is designed to carry up to 70 lb (32 kg) of material.

For use with standard 5-gal. (19-L) buckets - ordered separately.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (double)
Order number: LPJD301

Bucket (5-gal.)

Order number: LPJD400 (2 required)

Bucket holder (double) with buckets - LPJD301W

Double bucket holder

Transporting mulch, plants, or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Series Tractor. It is designed to carry up to 70 lb (32 kg) of material for transporting mulch, plants, yard waste, or for adding ballast.

For use with the included John Deere 5-gal. (19-L) buckets.

NOTE: May not fit all tractor models with a weather enclosure or cab installed.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (double) with buckets
Order number: LPJD301W

Bucket, 5 gal. (19 L) - LPJD400

5-gal. (19-L) bucket

This black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket - 5 gal. (19-L)
Order number: LPJD400

Fuel-Protect for gasoline engines, 8 oz (237 mL) - TY27534

8-oz (237-mL) Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round:

Has corrosion preventers
For lawn and garden equipment and other gasoline-powered vehicles
Ensures quick starts in all two- and four-cycle engines
Use in gasoline, gasoline-oil mixture, and ethanol blends
Use to treat gas cans at each fill-up or use at every fill-up of vehicle
Keeps fuel fresh for 12 months
Contains a fuel injector and carburetor cleaner
1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit JDParts.

Helpful tips:

Add fuel stabilizer every time fuel is purchased.
Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
Use plastic fuel containers to store fuel; ask a local John Deere dealer.
For best results, use a spill-proof gas can that automatically seals the gas can vent.
Store fuel in a cool, dry, dark place in a sealed fuel can.
Fill tank to the top every time the machine is put away.
- Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine.

For more information on fuel, visit John Deere Groundscare.

Lift-assist spring kit (X330, X350, X354) - BM25887

Adjustable lift assist spring kit

Adjustable lift assist spring kit installed

Adjustable lift assist spring decal

Adjustable lift assist spring kit is available to lower the effort required to operate the implement lift system:

Kit includes spring, hardware, decal, and installation instructions.
Kit is required for use of 48-in. (122-cm) Mower Deck or 44-in. (111.8-cm) Snow Blower on a X330, X350 or X354 Tractor shipped less deck or with a 42A or 42M Mower Deck that did not include the lift assist spring.
BM25887 lift assist spring kit is not compatible with tractors equipped with hydraulic lift.

NOTE: Lift assist is provided as standard equipment on X380 and X384 Tractors shipped with a 48-in. (122-cm) or 54-in. (137-cm) Mower Deck.

MowerPlus Smart Connector - BUC10537

Smart connector

The John Deere MowerPlus smart connector wirelessly links a Select Series X300 or X500 Tractor to the MowerPlus app on a mobile device:

No tools are needed for installation.
Detailed set-up instructions are included.
The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
The wireless connector and app work together to offer helpful information.

Tractor features available for viewing on the MowerPlus app include:

Tractor engine hours automatically synchronized to the app
In-app maintenance reminders and log, based on engine hours
Fuel level - even when away from the tractor, the app remembers information, like the fuel level, from the last synchronization.
- When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
Help to determine the best time to mow
Expert pre-mow optimization tips
Maintenance walk-through instructions

The operator is able to visit their device’s app store to see new app features as they are added.

Since the smart connector communicates instrument cluster information, future app releases will be able to provide additional operating recommendations and notifications.

MowerPlus smart connector (BUC10537) for Select Series X300 and X500 Tractors

Smart connector, wiring harness, and twist ties

One end of the wiring harness plugs into the back of a Select Series X300 or X500 Tractor instrument cluster. The other ends plug into the smart connector and the tractor's wiring harness.

Compatibility and requirements

MowerPlus smart connector (BUC10537) is for model year 2016 and later Select Series X300 and X500 Tractors.

MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:

iOS® version 10 or higher is compatible with the smart connector.
Android™ version 5.1 or higher is compatible with the smart connector.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Seat net kit - AM136046

Seat net kit

Seat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.

Snow blower and front blade compatibility kit - BM26155

Compatibility kit parts

Updates a model year 2006-2015 44-in. (112-cm) Snow Blower, 47-in. (119-cm) Snow Blower, or 48-in. (122-cm) Front Blade for use on a model year 2016 Select Series™ X300 or X500 Mult-Terrain Tractor.

Mower Blades

Blade (42A bagging) - GX25668

StarLock™ blade design

42-in. (107-cm) Starlock blade mounting

Blade (42A mulching) - M170642

StarLock™ blade design

42-in. (107-cm) Starlock blade mounting

Blade (42A side discharge) - M170639

StarLock™ blade design

42-in. (107-cm) Starlock blade mounting

Mower Decks

Grass Groomer (42A) - LP63762

Similar grass groomer shown - top view

Similar grass groomer shown - side view

Features and benefits

Homeowners can now achieve results just like the professionals
Brush is easy to adjust for varying mower cutting height
Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
The brush striping kit is a very economical and functional attachment

Compatible with the following:

42A - 42-in. (107-cm) Side Discharge Mower for X350, X354, and X370 Tractors

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42A - 42-in. (107-cm) tractor grass groomer

Order number: LP63762

Mower deck leveling gauge - AM130907

Mower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

Lawn tractors
Lawn and garden tractors
Riding mowers
Front mowers
Commercial walk-behind mowers
Zero-turn-radius mowers

Mulch Kits

42A MulchControl attachment - BM24794

MulchControl advantages and benefits

Z335E ZTrak™ with Accel Deep Mower

X350 Tractor with Accel Deep Mower

MulchControl for the 42-in. (107-cm) Accel Deep (42A) Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

A beautiful looking lawn
Grass clippings not blown onto the operator, driveways, or flower beds
Less fertilizer use
Elimination of the effort needed to dispose of clippings

How MulchControl works

MulchControl baffle open

MulchControl baffle closed

MulchControl is an innovative, simple design that is easy to use and maintain:

MulchControl includes baffles to control the flow of material under the deck.
- When the MulchControl baffle is open, most of the material passes through the discharge opening.
- When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl baffle closed

MulchControl handle

The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
- The operator is required to get off of the machine in order to engage or disengage mulch mode.
Changing from mulching to side discharging or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

Usually mulch, but side discharge when grass gets too long
Usually side-discharge, but would like to be able to close the chute to control clippings
Always mulch a main lawn, but often side discharge secondary lawns
Bag clippings, but want to go farther before emptying bags

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging when needed.

MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn clean-up is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute; see 42A versatility explanation for more information

42A electric one-touch MulchControl attachment - BUC10164

MulchControl advantages and benefits

Mower equipped with electric one-touch MulchControl

One-touch MulchControl switch

The 42-in. (107-cm) electric one-touch MulchControl attachment enhances versatility and productivity. A mower deck equipped with electric one-touch MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted to side discharge or mulch mode with the touch of a switch:

Easily converts while mowing from side discharge mode to mulch mode or vice versa
In mulch mode, controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.)
Reduces cleanup time needed to dispose of clippings
Will reduce the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material due to the additional baffles under the mower deck

How electric one-touch MulchControl works

A tractor equipped with the electric one-touch MulchControl attachment delivers unprecedented levels of productivity and versatility. A convenient, dash-mounted switch provides operators the ability to change between side discharging and mulching. A heavy-duty discharge baffle opens and closes easily with the touch of the dash-mounted switch.

MulchControl electric switch

MulchControl electric actuator

A dependable electric actuator is used to close and open the discharge baffle. The mower deck can easily be converted from side discharge mode to mulch mode or vice versa in a few seconds by activating the switch.

MulchControl baffle open

MulchControl baffle closed

MulchControl is an innovative, simple design that is easy to use and maintain:

MulchControl includes baffles to control the flow of material under the deck.

When the MulchControl baffle is open, most of the material passes through the discharge opening.
When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.

The MulchControl electric switch used to open and close the discharge baffle is located on the tractor dash.

The operator is not required to get off of the machine in order to engage or disengage mulch mode.

MulchControl is well suited to the following mowing situations:

For operators who usually mulch, but side discharge when grass gets too long
For operators who usually side discharge, but would like to be able to close the chute to control clippings
For operators who always mulch a main lawn, but often side discharge secondary lawns

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging when desired.

With electric one-touch MulchControl, operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require:

When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
When a breeze might blow clippings back onto the operator
For side discharge mowing only the areas of the property where grass is too tall or thick for mulching

Advantages of MulchControl include:

Performance is improved.

Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
Clippings are much smaller, which allows them to fall into the grass and be removed from view.
Unsightly grass clippings are not blown onto driveways or into flower beds.
Fertilizer use is reduce and provides associated environmental benefits.

Uptime is increased.

Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall or thick to mulch effectively.

Cost of operation is reduced.
- Controlling clipping dispersion reduces cleanup time.

MulchControl limitations

While in the side discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn cleanup is desired
42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute; see 42A versatility explanation for more information

Compatibility

This electric one-touch MulchControl attachment is field installed and compatible with a 42A Mower installed on an X300 Select Series Tractor.

NOTE: Model year 2016-2017 X300 Series Tractors (serial number 10,001-50,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Protection

Brush guard (X300/X500 M-T) - BM23057

Brush guard

The brush guard adds a distinctive appearance to the tractor and protects the front of the tractor from damage.

Brush guard lowered to permit opening hood

By removing one spring clip and pin, the brush guard may be lowered to permit opening the hood.

Bumper (X300s, X500, X530, X534, X570) - BM23056

Front bumper

The front bumper adds a distinctive appearance to the tractor and protects the front of the tractor from damage.

Features include:

Bumper can be easily mounted to the front of the tractor.
Bumper can remain on the tractor when the front blade or snow blower are used.

Riding mower cover, large deluxe - LP93647

Protective cover (large deluxe)

Cover provides heavy-duty protection for Select Series™ X300, X500, and X700 Tractors.

Features include:

Wipe-clean reinforced bottom around mower deck
Easy-on side handles makes snugging down cover a snap
Dual reinforced air vents let air circulate and help prevent ballooning in wind
Interior lining and integrated muffler heat shield
Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
Easy-on split back for fast fitting and easy access after installation
Handy storage pocket reverses into an attractive storage case
Two-year warranty

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (large deluxe)

Order number: LP93647

Riding mower cover, standard - LP93917

Protective cover (standard)

Features include:

Dual vents let air circulate and help prevent ballooning in wind
Elastic shock cord in bottom hem for a quick, custom-like fit
Coated fabric for maximum water protection
One-year warranty

Cover provides all-season protection for 100 Series, S240 and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (standard)

Order number: LP93917

Seat cover, medium deluxe yellow - LP92624

Seat cover, deluxe medium

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

Access to lumbar adjustment controls
Large-capacity rear-zippered cargo pocket
Two side mesh beverage pockets
Elastic cord in bottom hem for a custom fit
Medium size fits seats with backrests up to 15 in. (38.1 cm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe medium
Order number: LP92624

Seat cover, medium standard yellow - LP92324

Seat cover, standard medium

Seat cover protects new seats and renews old seats:

Cushioned seat for extra comfort
Four convenient pockets for keeping tools and gear within reach
Elastic cord in bottom hem for a custom fit
Medium size fits seats with backrests up to 15 in. (381 mm)

Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

Spanish North American Kit

Spanish label and operator's manual kit - BUC10202

Spark Arrester

Spark arrester muffler screen (X300s, X500 M-Ts) - AM135845

Spark arrester

Spark arrester is available to meet the law in the State of California requiring use of a spark arresting muffler under certain conditions.

Applies in other states and Canada when needed to comply with local ordinances or customer requests.

NOTE: This law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except watered lawns) without a spark arrester. For further information on this law, consult No. 4442.5 of the California Public Resources Code.

Sprayers

Mounted Sprayer, 25 gal. (95 L) (X300/X500 M-T) - LP22861

25-gal. (95-L) Mounted Sprayer shown on X300 Tractor

Features and benefits:

100-psi (689-kPa) SHURflo® diaphragm-type pump is designed for high-hour commercial applications; it can be run dry without damage.
It is easy to assemble the custom mounting brackets.
- Brackets use the existing frame holes.
Brass-tipped spray wand is included as standard equipment; it is constructed of noncorrosive polypropylene material with Viton® components for multi-use applications.
Check valves in the boom tips prevent siphoning and dripping, which can cause lawn spotting.
Control valve directs spray to either the boom or spray wand for added convenience
and versatility.
Electrical hookup is simple with a convenient on/off switch.
Sprayer contains a rugged translucent-yellow tank with molded fill-level indicators (in gallons).
It is only a 15-second no-tools mounting after assembly.

Specifications

Item number	LP22861
Tank capacity	25 gal. (95 L)
Boom	60-in. (152.4-cm) boom, 90-in. (228.6-cm) spray
Spray wand reach	30 ft (9.1 m)
Hose length	19 ft (8 m)
Shipping weight	35 lb (16 kg)
Warranty	2-year consumer warranty

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Mounted Sprayer for X300 and X500 Tractors

Order number: LP22861

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

Tow-Behind Sprayer, 15 gal. (57 L) - LP19478

15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

Sprayers provide an excellent way to apply liquid fertilizer.
Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

Fertilizer is more readily available to plants.
The fertilizer need not be worked into the soil by watering or rain before it will work.
Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

Tow-Behind Sprayer, 25 gal. (95 L) - LP19479

25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

Sprayers provide an excellent way to apply liquid fertilizer.
Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

Fertilizer is more readily available to plants.
The fertilizer need not be worked into the soil by watering or rain before it will work.
Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

Spreaders

Mounted Electric Broadcast Spreader, 125 lb (57 kg) (X300/X500 M-T/X700) - LP35439

Mounted electric spreader

The mounted electric broadcast spreader for Select Series and Signature Series Tractors is ideal for medium- to large-size jobs and can be used to apply fertilizer, weed killer, sand, lime, and de-icer:

Compatible with X300 and X500 Select Series and X700 Signature Series Tractors
- X300 Series Tractors must be equipped with 35-lb (16-kg) front wheel weights or front weight bracket and two 42-lb (19.1-kg) Quik-Tatch weights.
- The electric broadcast spreader is not compatible with the X300R Rear Discharge Tractor.
- When used on X700 Series Tractors, the spreader is not compatible with the weather enclosure, cabs, rear receiver hitch, or 3-point hitch.

Key features are as follows:

125-lb (57-kg) capacity injection molded poly hopper
Durable welded, powder-coat frame
Ice-melt capability
Gear motor with 5-to-1 reducer
Stainless-steel shutoff plates
Directional control
Hopper cover is standard equipment
Available option: Barrier shield, 125-lb (57-kg) spreader

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Select Series Electric Spreader

Item number: LP35439

Mounted electric broadcast spreader barrier shield - LP23117

Spreader barrier shield

The barrier shield is used to direct product downward (36-in. [914-mm] width), converting the rotary spreader into a drop spreader. Perfect for ice melt and salt spreading, or for targeting specific areas.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb electric broadcast spreader barrier shield
Order number: LP23117

Pull-Type Spin Spreader, 125 lb (57 kg) - LP25353

125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

Seed
Fertilizer
Insecticide
Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

Positive on/off system (no cables)
125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
13-in. (33-cm) pneumatic tires for easy rolling
Enclosed gearbox (metal gears)
Ergonomic dual handle featuring Accu-way™
Accu-way even spread pattern adjustment
Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

Dial position locks and unlocks automatically.
More than 80 settings provide an accurate application of materials.

Specifications

	125-lb (57-kg) Pull-Type Spreader	175-lb (79-kg) Pull-Type Spreader
Recommended market	Homeowner	Homeowner
Type	Tow-behind	Tow-behind
Bundle number	LP25353
Box capacity	125 lb (57 kg), 2.5 cu ft (0.07 m3)	175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)	14.5x25.25x19.75 (36.8x64.1x50.2)	18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
Hopper	Polyethylene	Polyethylene
Hopper screen	Aluminum	Aluminum
Hopper bottom plate	Stainless steel	Stainless steel
Throat opening, in. (cm)	0.81x2.75 (2.1x7)	0.81x2.75 (2.1x7)
Connecting hardware	Stainless steel	Stainless steel
Accurate application
Rate control	80-setting Dial-A-Matic knob	80-setting Dial-A-Matic knob
Rate gate	No-stick nylon	No-stick nylon
Rate gate linkage	Stainless steel	Stainless steel
Even dispersal
Spinner, in. (cm)	12 (366)	12 (366)
Spread pattern, ft (m)	10 to 12 (3.1 to 3.7) wide	10 to 12 (3.1 to 3.7) wide
Spread pattern equalizer	Accu-way™	Accu-way
Spinner shaft	Zinc-plated steel	Zinc-plated steel
Rotary agitator	Stainless steel	Stainless steel
Miscellaneous
Frame	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)	18 (45.7)	18 (45.7)
Drive gears	Heavy-duty die-cast metal	Heavy-duty die-cast metal
Axle	0.63-in. (15.9-cm) solid steel, zinc plated	0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires	13-in. x 5-in. (33-cm x 13-cm) pneumatic	13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed	3.5 mph (5.6 km/h)	3.5 mph (5.6 km/h)
Warranty	One-year limited	One-year limited
Net weight, lb (kg)	29 (13.2)	34 (15.4)

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

Pull-Type Spin Spreader, 175 lb (80 kg) - LP25354

175-lb (79-kg) Pull Spreader

Seed
Fertilizer
Insecticide
Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

Positive on/off system (no cables)
175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
13-in. (33-cm) pneumatic tires for easy rolling
Fully enclosed gear box with metal gears for long life
Accu-way even spread pattern adjustment
Includes screen and cover

Hopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

Dial position locks and unlocks automatically.
More than 80 settings provide an accurate application of materials.

Specifications

	125-lb (57-kg) Pull-Type Spreader	175-lb (79-kg) Pull-Type Spreader
Recommended market	Homeowner	Homeowner
Type	Tow-behind	Tow-behind
Bundle number	LP25353
Box capacity	125 lb (57 kg), 2.5 cu ft (0.07 m3)	175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)	14.5x25.25x19.75 (36.8x64.1x50.2)	18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
Hopper	Polyethylene	Polyethylene
Hopper screen	Aluminum	Aluminum
Hopper bottom plate	Stainless steel	Stainless steel
Throat opening, in. (cm)	0.81x2.75 (2.1x7)	0.81x2.75 (2.1x7)
Connecting hardware	Stainless steel	Stainless steel
Accurate application
Rate control	80-setting Dial-A-Matic knob	80-setting Dial-A-Matic knob
Rate gate	No-stick nylon	No-stick nylon
Rate gate linkage	Stainless steel	Stainless steel
Even dispersal
Spinner, in. (cm)	12 (366)	12 (366)
Spread pattern, ft (m)	10 to 12 (3.1 to 3.7) wide	10 to 12 (3.1 to 3.7) wide
Spread pattern equalizer	Accu-way™	Accu-way
Spinner shaft	Zinc-plated steel	Zinc-plated steel
Rotary agitator	Stainless steel	Stainless steel
Miscellaneous
Frame	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steel	Powder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)	18 (45.7)	18 (45.7)
Drive gears	Heavy-duty die-cast metal	Heavy-duty die-cast metal
Axle	0.63-in. (15.9-cm) solid steel, zinc plated	0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires	13-in. x 5-in. (33-cm x 13-cm) pneumatic	13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed	3.5 mph (5.6 km/h)	3.5 mph (5.6 km/h)
Warranty	One-year limited	One-year limited
Net weight, lb (kg)	29 (13.2)	34 (15.4)

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

Tow-Behind Aerator-Spreader, 40 in. (102 cm) - LPAS40JD

40-in. (102-cm) Tow-Behind Aerator Spreader

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
132 steel-tine tips on 8-in. (20-cm) diameter tine stars
Three-position, full-sized lift lever
Direct spreader drive for consistent performance
Adjustable flow control
100-lb (45-kg) spreader capacity
4.10/3.5-4 pneumatic tires for easy pulling
75-lb (34-kg) capacity weight tray

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 2 in. (5.1 cm), two positions
Spreader capacity	100 lb (45 kg)
Tines
Number of tips	132
Diameter	8 in. (20.3 cm)
Material	Steel
Lift adjuster	Manual
Wheels	4.10/3.5-4, pneumatic
Drive	Direct
Weight-tray capacity	100 lb (45 kg)

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

Tow-Behind Broadcast Spreader, 130 lb (59 kg) - LP39087

130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Tow-Behind Broadcast Spreader, 175 lb (80 kg) - LPBS36JD

Broadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

The polyethylene hopper will not dent or rust.
All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
Large pneumatic turf tires ensure a positive drive and smooth operation.
High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
Fully enclosed gearbox eliminates downtime and maintenance.
Autoflow feature stops the flow of materials - automatically - to prevent burns.
Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun Protection

Sun shade (X300 and X500 M-T) - BM23054

Sun shade for Select Series X300 and X500 Tractors

Sun shade installs on heavy-duty CargO Mounts

The sturdy sun shade provides an effective way to keep the sun off of the operator for more comfortable warm-weather operation of the tractor:

Frame is made of strong 1.25-in. (32-mm) diameter steel tube with 0.063-in. (1.6-mm) wall thickness.
The sun shade mounts to the heavy-duty CargO Mount™ system.
- Sun shade includes the 4-wheel-steer rear weight bracket to provide a sturdy
  Quik-Tatch mounting system.
  - Holds up to two 42-lb (19-kg) Quik-Tatch weights on X300 Series Tractors
  - Holds up to four 42-lb (19-kg) Quik-Tatch weights on X500 Multi-Terrain Tractors
Cloth top measures 32-in. (81.3-cm) long by 34-in. (86.4-cm) wide.
Rear panel is made of cloth mesh material to provide additional protection from the sun while permitting the operator to see through it.
Two bolts with hand knobs on the mounting posts allow easy removal of the sun shade.
Elastic strap with clip is included to hold the 7-bu (247-L) hopper top open when the hopper is installed.
Overall height to the top of the sun shade is 72 in. (182.9 cm).

The sun shade is compatible with the following:

Select Series™ X300, X304, X320, X324, X340, X350, X354, X360, X370, X380, X384, X390, and X394 Tractors
Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Sun shade installed using 7-bu (247-L) bagger bracket

The 7-bu (247-L) 2-bag hopper or 14-bu (493-L) 3-bag hopper can be installed and used with the sun shade installed. The sun shade installation instructions explain how to install the hoppers with the sun shade.

Ordering Information

Please contact your local John Deere dealer for availability and pricing information.

X300/X500 Sun Shade

Order number: BM23054

Thatchers

38-in. (97-cm) Front Thatcher (Center) - LP48004

Front thatcher

The thatcher, used on a regular basis, reduces excessive thatch buildup that can be damaging to a lawn's health.

Since it provides more gentle, less aggressive action than a power rake, it can be used as a preventive maintenance tool each time the lawn is mowed.

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

38-in. (97-cm) Front Thatcher

Order number: LP48004

8-in. (20-cm) Front Thatcher (Extension) - LP48003

8-in. (20-cm) thatcher extension for wider widths

An 8-in. (20-cm) extension is available to provide widths of 46 in. (117 cm) and 54 in. (137 cm) (Add an extension to one end of front thatcher to make it 46-in. [117-cm] wide; add an extension to both ends for a 56-in. [142-cm] width.)

Thatcher Mounting Frame (X300/X500 M-T) - LP48005

Front thatcher installed on X534 Tractor

A thatcher mounting frame is required to install the 38-in. (97-cm) front-mounted thatcher on a vehicle.

Tow-Behind Thatcherator, 40 in. (102 cm) - LPTA40JD

40 in. (102-cm) Tow-Behind Thatcherator

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

40-in. (102-cm) width to cover ground fast
20 spring-loaded tines for maximum performance
Three-position adjustment
Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

Width	40 in. (101.6 cm)
Tines
Number	20, spring-loaded tips
Diameter	0.19 in. (0.5 cm)
Material	Steel
Weight tray capacity	100 lb (45 kg)
Lift adjuster	Three positions
Wheel
Size	8 in. (20.3 cm)
Tread	Rib
Material	Steel
Optional extension	8 in. (20.3 cm)

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

Tire Chains

TerraGrip traction belts (pair) for 20x10-8 non-Turf Saver, 20x10-10, and 20x9-8 tires - LP39856

TerraGrip Traction Belt

Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.

Features:

Rubber slats surround the tire and will not damage driveways or sidewalks.
No steel touches the driving surface.
No-tools installation utilizes a traditional steel chain attachment system.
Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
TerraGrip Traction Belts are approved for John Deere X300, X500 M-T, and X700 Series Tractors.

Additional information for 4-wheel-steer tractor models:

X700 Series – requires wheel spacer sold separately
X500 Series – requires wheel stop adjustment
X300 Series – no additional requirements

Tire chains (pair) for 20x10-8 non-Turf Saver and 20x10-10 tires - TY16200

Tire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using attachments such as a snow blower or front blade.

One pair of chains is included in each bundle.

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, and E120 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, and E180 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

Tow Behind

Lawn Sweeper, 42 in. (107 cm) - LPSTS42JD

42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

42-in. (107-cm) clearing width
17-bu (599-L) capacity to make fast work of picking up material
Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
Hitch has seven positions to match up correctly with a variety of vehicles
Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

Specifications

Brush height	Sweeping conditions
Ground level to 1 in. (25 mm) above	Smooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)	Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)	High grass, heavy leaves, or heavy grass clippings

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD

Lawn Sweeper, 44 in. (112 cm) - LP49038

44-in. (112-cm) Lawn Sweeper

The 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

44-in. (112-cm) clearing width
17-bu (599-L) capacity to make fast work of picking up material
Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
Hitch has seven positions to match up correctly with a variety of vehicles
Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space

Quality design

Specifications

Brush height	Sweeping conditions
Ground level to 1 in. (25 mm) above	Smooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)	Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)	High grass, heavy leaves, or heavy grass clippings

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038

Lawn sweeper dethatcher kit (LPSTS42JD) - LP42108

Dethatcher kit for sweeper

This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Dethatcher kit for sweeper

Order number: LP42108

MT42C Multi-Tool 42 in. Combo (Plug Aerator and Thatcher) - LP39089

Multi Tool

The Multi Tool includes one platform and two separate attachments, saving space and money.

Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
Elongated handle - makes it easier to raise into transport or lower for use
Spring assisted lever - makes changing the attachments quick and easy

John Deere has combined the best lawn tools into one package.

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Multi Tool

Order number: LP39089

Tow-Behind Lawn Roller, 18 x 36 in. (46 x 91 cm) Poly - LPPRT36JD

36-in. (91-cm) Tow-Behind Lawn Roller

The Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:

36-in. (91-cm) wide polyethylene drum
390-lb (177-kg) weight for excellent leveling
Rounded end caps to reduce gouging
42-U.S. gal. (159-L) capacity
Long-lasting Nylatron® bearings

Nylatron is a trademark of QUADRANT AG or its affiliates or licensors.

Quality design

Specifications

Width	36 in. (91 cm)
Roller
Size	36 in. x 18 in. (91 cm x 46 cm)
Capacity	42 U.S. gal. (159 L)
Weight (filled)	390 lb (176.4 kg)
Drum/end-cap material	High-density polyethylene (HDPE)
Bearings	Nylatron

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

36-in. (91-cm) Tow-Behind Lawn Roller

Order number: LPPRT36JD

Tow-Behind Plug Aerator, 40 in. (102 cm) - LPPA40JD

40-in. (102-cm) Tow-Behind Plug Aerator

The 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:

40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
1-in. (2.5-cm) diameter high-carbon steel-tine shaft
4.10/3.50-4 pneumatic tires for easy pulling
175-lb (79-kg) capacity weight tray

Quality design

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 3 in. (7.6 cm)
Tines
Number of tips	28
Spacing	6 in. (15.2 cm) apart
Material	Carbonized, 16-gauge, 0.6-in. (1.5-mm) steel
Lift adjuster	Manual, three position
Wheels	4.10/3.5-4, pneumatic
Weight-tray capacity	175 lb (79.4 kg)

Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Plug Aerator

Order number: LPPA40JD

Tow-Behind Spiker Aerator, 40 in. (102 cm) - LPSAT40JD

40-in. (102-cm) Tow-Behind Spiker Aerator

The 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:

40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
10-in. (25-cm) diameter steel-tine stars
132 steel-tine tips on 11 spike wheels
3.5-in. (9-cm) spike-wheel spacing
Full-sized lift lever
4.10/3.5-4 pneumatic tires for easy pulling
100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration

Quality design

Specifications

Width	40 in. (101.6 cm)
Aerator depth	Up to 2 in. (5.1 cm)
Tines
Number of tips	132
Diameter	10 in. (25.4 cm)
Spacing	3.5 in. (8.9 cm) apart
Material	Steel
Lift adjuster	Manual
Wheels	4.10/3.5-4, pneumatic
Weight tray capacity	100 lb (45 kg)

Requirements and/or recommendations: tow-behind equipment

Rear wheel weights are recommended for additional traction.
The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Spiker Aerator

Order number: LPSAT40JD

Weather Enclosures

X300 Series weather enclosure - LP55438

Weather enclosure for X300 and X500 M-T Tractors

The roomy steel-frame cab shields the operator against snow, rain, sun, and wind.
Key features include:

Easy entry with hinged-door access
Double-zippered access hole for control maneuverability
Super-clear vinyl windows that are cold-crack tested to -4°F (-20°C)
Zippered windows that allow for additional airflow
Assembles and installs with standard hand tools in one hour
Overall height from ground to top of cab of 78 in. (198 cm)

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Weather enclosure

Discontinued - LP36740 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, and X360 Tractors
LP55438 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, X350, X360, X354, X370, X380, X384, X390, and X394 Tractors
Discontinued - LP36741 Weather Enclosure - Select Series X500, X520, X530, X534, X540, and X590 (model year 2015) Multi-Terrain Tractors
LP55439 Weather Enclosure - Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Weights

34-lb (15-kg) Wheel Weight (1), cast iron, 5-in. or 6-in. front wheel - BM17962

34-lb (15.4-kg) front wheel weight

A durable cast-iron weight can be mounted to each front wheel.

These weights are recommended for use when operating on slopes, especially when the tractor is equipped with a rear grass bagger or other rear-mounted equipment.

Each weight requires BM17978 mounting hardware.

Quik-Tatch Weight, 42 lb (19 kg) - UC13263

42-lb (19-kg) Quik-Tatch weight

42-lb (19-kg) weights and optional mounting bracket

The 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.

This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).

Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.

X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:

One M147986 weight retaining rod (Parts)
Two M40461 spring clip (Parts)

Weight bracket, front (X300/X500 M-T) - BM25370

Standard front bumper

Optional front weight bracket/bumper installed

The optional front weight bracket/bumper is available to replace the standard front bumper on the following tractors:

Select Series™ X300, X300R, X304, X305R, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
Model year 2007 and later (SN 020001-) Select Series model X500 Tractor
All X530 Select Series Tractors
Model year 2011 and later (SN 060001-) Select Series model X534 Tractor
X570 Select Series Tractor

Front weight bracket/bumper with four weights

NOTE: Weights are ordered separately.

Holds up to four 42-lb (19.1-kg) Quik-Tatch weights:

Provides an alternative to front-wheel weights for ballasting rear-mounted equipment
Makes the 42-in. (106.7-cm) Hydraulic Tiller compatible with the X530 Tractor
Functions as a bumper when weights are not installed

Can be used in combination with all John Deere equipment, except the following:

Styled front bumper (BM23056)
40-in. (101.6-cm) Tractor Shovel

Wheel weight mounting hardware for attaching one front wheel weight - BM17978

30-lb (13.6-kg) front wheel-weight shown

Hardware is required for installing each front-wheel weight.

Requirements:

Mounting may require drilling two holes in the wheel rim.
BM17978 mounting hardware kit is required for each weight.

From: Farmington, NY

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE4

QUALITY2

EASE OF USE5

5/5

Bought my John Deere 4 mowings ago and have used it to pull down a fallen tree branch - best mower and customer service in Hillsboro

Pros

Cons

Mean Machine 2024

From: Prairie du Dac, WI

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

VALUE4

QUALITY2

EASE OF USE5

Workhorse

5/5

Bought from AgPro London, OH. Excellent sales staff and management. It's taking some getting used to (different controls), but runs like a top and does everything I ask of it

Pros

Cons

From: Jamestown, NC

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE4

QUALITY2

EASE OF USE5

Dangerous.

3/5

Pros

Cons

Mungo

From: Oakland Maine

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

VALUE1

QUALITY2

EASE OF USE5

Good Purchase

4/5

Bought my X350 in April to use for the upcoming mowing season. No issues with it and I opted for the 48in deck. Went with the X350 over pricier models due to the work I need to do with the lawn. Wanted an X Series and am glad I went that route. Had some issues with deck levels (furthest right blade) especially at an angle/slope but that was easily corrected. I feel like I use more gas than my previous riding mower but not so much where it stands out. Overall, feel happy with my purchase and would recommend a JD lawn tractor.

Pros

Cons

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE1

QUALITY2

EASE OF USE5

3/5

nice tractor but a few things i don't like the brake pedal is hi and so much closer, and its hard to bend my leg just to use it. also, the hydrostatic transmission is different than the others, when you release a pedal you are now in freewheel and when I'm on hills its dangerous as you immediately start coasting down hill. when you engage the blades they squeal, every time i hate the button you must press to cut grass in reverse, once i is engaged it should stay on , very annoying

Pros

Cons

ggross

From:

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE3

QUALITY2

EASE OF USE5

5/5

I bought this 6 weeks ago and I'm very happy with it. I love the improved turning and a quieter engine

Pros

Cons

markinak05

From: Moncks Corner Sc

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

VALUE4

QUALITY2

EASE OF USE5

okay but lacks traction on hills

4/5

We bought this about a 6 weeks ago and so far it's okay. After 6 years we would be better able to provide a good review. I will say that the tires seem to lack traction on hills which is a bit disappointing but if your lawn is flat, you shouldn't have a problem.

Pros

Cons

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

VALUE5

QUALITY2

EASE OF USE5