×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

X380 LAWN TRACTOR 48 IN

Lawn Tractor with 48-in. Deck
x300-series

  • 23-hp (17.2-kW)* iTorque™ Power System
  • 48-in. Accel Deep™ mower deck, compatible with optional MulchControl™ kit with one-touch technology
  • Twin Touch™ forward and reverse pedals
  • 4 year/300 hour bumper-to-bumper warranty
$ 5,599.00 MSRP

PLUS ADDITIONAL CHARGES


Apply For FinancingBuy OnlineMaintenance Plans
View Product Brochure



Features



Engine is smooth running and reliable V-twin air-cooled design

23-hp (17.2-kW) V-twin engine 23-hp (17.2-kW) V-twin engine

The tractor is powered by a John Deere iTorque power system, a combination of engine features and an exclusive hood design that provide superior lugging ability, even cooling, and durability.

A 23-hp (17.2-kW) V-twin engine provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions.

Key engine features include:

  • 23 hp (17.2 kW)
  • Large 44.3 cu in. (726-cc) displacement
  • V-twin air-cooled design that provides smooth, quiet power
  • Quality features include:
    • Cast-iron cylinder liners
    • Overhead valves
    • Full-pressure lubrication
    • Replaceable oil filter
  • Dual-stage air cleaner V-twin design:
    • Excellent power and performance
    • Easy starts
    • Smooth operation
Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 12-amp charging capacity
  • Regulated to keep the battery at full charge without risk of overcharging
Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity
Fuel tank Fuel tank
Electronic fuel gauge Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

  • Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
  • Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
    • Located on the left fender
    • Helps eliminate spillage
  • Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.

48-in. (122-cm) Accel Deep™ (48A) Mower Deck cuts clean and is versatile

X394 with Accel Deep 48A Mower Deck X394 with Accel Deep 48A Mower Deck
Accel Deep 48A Mower Deck Accel Deep 48A Mower Deck

The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

  • 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
    • Optional lever-action or electric one-touch MulchControl™ system provides superior mulching performance and versatility.
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
  • Mower deck is suspended from the vehicle for a smooth and level cut
    • Adjustable mower wheels, positioned just above ground level, help reduce scalping 
  • 0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
  • Compatible with high-performance Power Flow™ material collection systems
  • For use on X330, X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and model year 2016 and newer X590 Tractors
Excellent cut quality
48A Mower Deck top (similar mower from X700 Series Tractor shown) 48A Mower Deck top (similar mower from X700 Series Tractor shown)
48A Mower Deck underside (similar mower from X700 Series Tractor shown) 48A Mower Deck underside (similar mower from X700 Series Tractor shown)

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
    • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.
  • Exact Adjust deck-leveling system allows for easy and accurate leveling of the mower deck.
Productivity - getting the job done fast
Right side of Accel Deep 48A Mower Deck Right side of Accel Deep 48A Mower Deck

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:

  • Greatly improves mower's capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

  • Gives a smooth, even discharge of clippings at all mowing speeds
  • Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
  • The 48A Power Flow blower has an inlet housing with over 50 percent greater area than the 48X Power Flow blower used on previous machines.
Cleanliness - for the mower and the operator
Accel Deep 48A Mower Deck Accel Deep 48A Mower Deck
Accel Deep 48A Mower Deck Accel Deep 48A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

  • There are few places to catch and hold material on top and underneath the deck.
    • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
    • Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
    • Less need to clean and remove buildup of material from underside deck
  • The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck:
    • Limited amount of material to drift onto the operator and mower deck
    • Even for material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
    • Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

  • The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
Mower wash port Mower wash port
Mower wash port with hose connector Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

  • Hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket with flip-up cover Spindle pocket with flip-up cover
Easy-to-adjust mower wheel and mower side reinforcement Easy-to-adjust mower wheel and mower side reinforcement

The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:

  • Stamped from strong 10-gauge, 0.135-in. (3.4-mm) steel
  • Ribs in the deck shell add strength where it is needed
  • The 48A has a 23 percent heavier overall weight than the Edge™ Xtra 48-in. (122-cm) Mower Deck used on previous machines.

Mower wheels are heavy duty:

  • Provides greater strength and durability for longer, trouble-free life.
  • Setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.

The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility - easy to change between side discharge, mulch, and bagging modes

The 48A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

  • With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
  • The Power Flow rear bagger can be used with MulchControl by simply using the MulchControl lever or electric one-touch switch to move the mulch baffle to the side-discharge position.
7-bu (247-L) Power Flow rear bagger
Optional rear bagger Optional rear bagger
Power Flow blower Power Flow blower

An optional 7-bu (247-L) rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:

  • The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
  • The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:
    • 7-bu (247-L) capacity
    • Easy-to-attach Power Flow blower (ordered separately)
    • Easy-to-attach chute (ordered separately)
    • Air exhaust duct
    • Convenient spring-latch
    • Airflow fill indicator
    • Quik-Tatch mounting
    • Sealed hopper top
    • Loose-knit bags available

Larger 14-bu (493-L) and 19-bu (670-L) MCS are available, in addition to the 7-bu (247-L) MCS, for specific X300 and X500 Series Tractor models.

Mower blades

Side-discharge blades can be used with the Power Flow system when bagging.

Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging.

 

Mower blade use chart

Mode(s) of operation

Mower blade

Side discharging mode only 

Side-discharge blade (shipped with mower) 

Mulching mode only

Mulching blade (shipped with MulchControl)

Side discharge and mulching

Mulching blade (shipped with MulchControl)

Bagging

Either side-discharge or mulching blade

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

  • The warranty is hassle free, with one company handling all the paperwork.
  • Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

MulchControl™ system provides superior mulching performance and rapid conversion

Lever-action MulchControl lever (shown on 48A mower deck) Lever-action MulchControl lever (shown on 48A mower deck)
Electric one-touch MulchControl switch Electric one-touch MulchControl switch

The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • Creates a beautiful looking lawn
  • Smaller grass clippings disappear into the lawn canopy
  • Reduces fertilizer needs
  • Grass clippings are not blown onto the operator, driveways, or flower beds
  • No need to dispose of bags of clippings
How MulchControl works
MulchControl baffle open (shown on 48A mower deck) MulchControl baffle open (shown on 48A mower deck)
MulchControl baffle closed (shown on 48A mower deck) MulchControl baffle closed (shown on 48A mower deck)

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
  • The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
  • When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
  • When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

  • For operators who usually mulch, but side discharge when grass gets too long
  • For operators who usually side discharge, but would like to close the chute to control clippings in some areas
  • For operators who always mulch a main lawn, but often side discharge secondary lawns
  • For operators who collect clippings but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings.

 

Electric one-touch MulchControl

Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

Electric one-touch MulchControl switcht Electric one-touch MulchControl switcht
Electric one-touch MulchControl actuator (shown on 42A mower deck) Electric one-touch MulchControl actuator (shown on 42A mower deck)

Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

  • When approaching driveways or flower beds where clippings would be undesirable
  • When a breeze blows clippings back onto the operator
  • For side discharge mowing only the areas of the property where grass is too thick for mulching
  • With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
MulchControl limitations

While in the side discharge mode, MulchControl still mulches about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean­up is desired
  • 42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

When bagging with MulchControl on a 48A or 54A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.

Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

MulchControl compatibility

Each MulchControl system is an optional field-installed attachment and includes everything needed: baffles, mulch blades, a handle (lever action attachments) or an actuator, wiring, and switches (electric one-touch attachments).

Lever-action MulchControl attachments
Attachment Description Applications
BUC10704 42-in. (107-cm) Accel Deep MulchControl (lever action) Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
BUC10705 48-in. (122-cm) Accel Deep MulchControl (lever action) S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BUC10706 54-in. (137-cm) Accel Deep MulchControl (lever action) Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
Electric one-touch MulchControl attachments
Attachment Description Applications
BUC10164 42-in. (107-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 Series Tractors*
BUC10165 48-in. (122-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 and X500 Series Tractors*
BUC10166 54-in. (137-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 and X500 Series Tractors*

*NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Snow removal is a strength of lawn tractors

44-in. (112-cm) Front Blade 44-in. (112-cm) Front Blade
Snow blower, weather enclosure, and chains on an X300 Series Tractor Snow blower, weather enclosure, and chains on an X300 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

  • 44-in. (112-cm) Snow Blower
  • 44-in. (112-cm) Front Blade
  • 48-in. (122-cm) Front Blade (X394 Tractor only)
  • Tire chains or TerraGrip traction belts
  • Weather enclosure (available for all X300 Series, except the X350R)
  • Weights

 

Steering is low-effort sector and pinion system

Tight turning radius Tight turning radius
Designed for easy turns Designed for easy turns

A heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:

  • Small, 16-in. (40.6-cm) turning radius provides excellent maneuverability
  • Tight turning ability improves mowing efficiency
Easy steering

Easy steering is important for an enjoyable mowing experience:

  • Large, 14-in. (36-cm) diameter steering wheel for improved leverage
  • Large sector gear for improved (higher) steering ratio
    • A higher ratio equals lower steering effort
  • Dual drag links to help equalize the steering loads and reduce steering error
  • Ball joints on both ends of the steering tie rods for long life
  • Long steering arms to improve the mechanical advantage of the steering system through the full range of motion
  • Sector gear that pivots on a shaft rather than a bushing to ensure proper gear mesh and eliminate binding
  • Greaseable front steering spindles to reduce friction and improve wear over time

Integrated hydrostatic transaxle efficiently transmits power to wheels

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370) Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)
Kanzaki K58 transaxle (X380, X384, X390, X394) Kanzaki K58 transaxle (X380, X384, X390, X394)

The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.

Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

  • Use of the latest valve designs has significantly reduced the sound level.
  • Large pump and motor rotating groups ensure long life and efficient operation.
Freewheeling valve
Freewheeling valve Freewheeling valve

A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Controls and display functions are easy to identify and convenient to use

X350 Tractor mowing X350 Tractor mowing
Steering wheel and controls (switch turned on to show display) Steering wheel and controls (switch turned on to show display)
Controls

The contoured dash has clean, attractive styling and ergonomic controls for easy use:

  • Controls are color coded and labeled with English words for easy identification by the operator.
  • Controls are logically placed and easy to reach.
  • The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
  • The reverse implement option (RIO) switch is a yellow button.
  • The latch control on foot-lift models and hydraulic-lift control on power-lift models and the park brake latch are pivot levers for low effort.
  • Cruise control activation is handled by an automotive-style button.
  • Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
    • The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
  • Functional design of the throttle and choke controls provides good appearance and a comfortable feel.
Display panel
Display panel Display panel
Display panel illustration with descriptions Display panel illustration with descriptions

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

  • Display features dark-cockpit design to minimize operator distractions.
  • Display is back lit for night visibility.
    • Night visibility is especially useful with snow blower use.
  • Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
  • Electronic fuel gauge provides real-time fuel level information.
    • The X350R has a low fuel light, rather than a fuel gauge, to provide the operator with a noticeable warning when low on fuel.
  • A tachometer graphically displays engine speed.
    • Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
  • An indicator tells the operator when the PTO is operating.
  • Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
    • Damage can be prevented and repair costs can be reduced by addressing problems early.
  • Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
    • The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
  • Operators are advised if battery voltage is low, normal, or excessive.
  • The service indicator light illuminates to indicate a diagnostic error code is stored.
    • Onboard diagnostics provides trouble codes for use by trained technicians.
      • For example, a technician can test switch functionality and circuit continuity without tools.
Twin Touch™ foot control
Twin Touch foot control Twin Touch foot control
Cruise control Cruise control

Twin Touch foot pedals control the speed and direction of travel:

  • Automotive-type accelerator control ensures easy operation.
  • Operator can change direction without lifting foot off the platform.
  • Large pedal surface gives superior operator comfort.
Cruise control

Cruise control is standard equipment:

  • To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
  • For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
Mower deck height adjustment
Cut height adjusting knob Cut height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

  • Provides mower cut heights in 0.25-in. (0.64-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
  • Returns the mower deck to the same preset height each time it is lowered
Storage tray under tractor seat Storage tray under tractor seat
Exact Adjust tool is used to level mower deck Exact Adjust tool is used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat:

  • Exact Adjust ports on the fender deck allow for easy and accurate leveling of the mower deck for optimum mowing performance.
Deck-leveling gauge placed under deck Deck-leveling gauge placed under deck

Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.

 

Foot-pedal lift system
Foot-pedal lift system Foot-pedal lift system

Pushing with the foot to raise the mower or implement is less strenuous for many operators than using a hand-lift lever:

  • The easy-to-use raised position lock operates similarly to the park brake lock.
  • The foot pedal is out of the way and not likely to catch on bushes and tree limbs when mowing.
  • The mower deck returns to the same preset height each time it is lowered.
Adjustable lift-assist spring
Lift-assist spring decals and adjusting bolt Lift-assist spring decals and adjusting bolt
Close-up of lift-assist spring decal Close-up of lift-assist spring decal

NOTE: The adjustable lift-assist spring is standard equipment on tractors with manual foot-lift system that are shipped with the 48-in. (122-cm) and 54-in. (137-cm) side-discharge mowers, and an option for tractors shipped with 42-in. (107-cm) mowers. It is a recommended option for foot-lift tractors sold with the 42-in. (107-cm) mulch mower.

  • Lift-assist spring is provided on tractors shipped from the factory with a 48-in. (122-cm) or 54-in. (137-cm) side-discharge mower deck, except models with hydraulic lift, and a recommended option for tractors equipped with a 42-in. (107-cm) mulch mower to minimize lift effort.
    • A spring-assist kit is available for other models for use with front equipment.
  • Lift effort can be easily adjusted by turning a bolt, located on the tractor front bumper, for optimum performance, depending on the equipment used (mower, front blade, snow blower, etc.).
  • The mower will not be inadvertently locked in the raised position when mowing through ditches.
  • When installing or removing a mower or front equipment raised by the foot-lift system, spring tension may be removed from the connection points by pulling rearward on the lift pedal and raising the lift latch to hold the pedal in the rearward position.
Parking brake control
Parking brake Parking brake

Depressing the brake pedal applies internal wet-disk brakes, which provide better reliability and longer life than external brakes, for safe stopping.

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Electric PTO clutch is easy and convenient to use
Electric PTO switch Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch
PTO clutch PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

RIO
Reverse implement switch Reverse implement switch
Mower engagement PTO switch Mower engagement PTO switch
Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

  • Carefully check the area around the machine.
  • Disengage the mower before backing up.

NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

  1. Stop forward travel. Allow attachment to run.
  2. Look down and behind the machine to be sure that there are no bystanders.
  3. Push and hold in the reverse implement switch while depressing the reverse pedal slightly.
    NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
  4. Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
  5. Resume forward travel. The attachment should continue operating.
  6. Repeat procedure to position the machine again.

Frame is reliable heavy-duty welded steel

Welded, heavy-duty frame Welded, heavy-duty frame

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

  • The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
  • Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
  • Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.
    • Weight bracket is built into the frame of two-wheel-steer models.
    • Four-wheel-steer models require the optional weight bracket.
Front axle and wheel spindles are heavy-duty
Cast-iron front axle Cast-iron front axle

Front axle is made of nodular cast iron:

  • Cast-iron front axle is strong and shock resistant.
  • Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

  • The bushing provides excellent wear resistance.
  • Grease fittings at each spindle are easy to service.
Front steering spindles
Steering spindle Steering spindle

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

  • Have strength to handle heavy implements
  • Provide long life at bearing surfaces
  • Use sealed precision bearings in front wheels
Rear equipment-mounting system is heavy-duty and easy to use
Rear equipment mounting system Rear equipment mounting system

A heavy-duty equipment mounting system is used:

  • Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
  • Easily attach optional equipment to the tractor
  • Can bear the load of heavy rear-mounted equipment, such as material collection systems

Modern styling with functional design enhances appearance and performance

Attractive styling Attractive styling
Hood air-intake louvers Hood air-intake louvers

Smooth, rounded contours present a modern, styled appearance:

  • Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.
    • Cooler engine operation
    • Lower operator station sound levels
  • Hot air is vented out the front grille, away from the operator.
  • The fully enclosed hood is made of molded-in-color material.
    • Reduces sound
    • Will not rust or dent
  • Distinctive grille and large, one-piece fender deck complete the styling package.
Two high-quality headlights give excellent visibility
Optimum lighting pattern Optimum lighting pattern

Headlights are standard equipment on all models:

  • Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
  • A headlight position on the ignition switch makes it easy to operate the headlights.
  • The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Operator station is comfortable and convenient

Operator station Operator station
Operator station Operator station

The operator station is designed for operator comfort and ease of using controls:

  • A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
  • Full-length foot mats provide comfort for the operator and protect the footrest area.
Comfortable seat
Comfortable cut-and-sewn seat Comfortable cut-and-sewn seat
Comfortable cut-and-sewn seat with optional armrests Comfortable cut-and-sewn seat with optional armrests

An 18-in. (46-cm), high-back cut-and-sewn seat delivers a comfortable, smooth ride and excellent support for the operator:

  • A smoother, more comfortable ride results from the use of more foam than in a form-in-place seat and more side-bolstering to stabilize the operator on uneven terrain.
  • Improved visual appeal is provided by the thicker cushion, additional bolstering in the seat and back, and an embroidered John Deere logo that makes this upscale seat look as good as it feels.
  • Long-term pliability and less chance of cracking are advantages of the cut-and-sewn process, which does not require heating during the manufacturing process and gives a more uniform vinyl thickness.
  • Additional operator support and comfort is available with optional BM23761 armrests.
  • Reduced cost of repair, should the seat cover be damaged, is available with a replaceable seat cover available from Parts.
  • Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls. Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
Adjustable seat suspension
Seat suspension with springs in rear position Seat suspension with springs in rear position
Seat suspension with springs in forward position Seat suspension with springs in forward position

The seat suspension is adjustable, without tools, for the weight of the operator:

  • Springs are adjustable fore and aft to any of three positions.
    • No tools required
    • Allows fine-tuning of the suspension for the operator's weight
    • Back position for more support for heavier operators
  • Tool tray is designed into the seat base.
    • Can be used to store gloves, small tools, etc.
    • Provides storage location for Exact Adjust tool and deck-leveling gauge
Cup holder and toolbox
Cup holder and covered toolbox on fender Cup holder and covered toolbox on fender
Covered toolbox with open cover Covered toolbox with open cover

A cup holder and toolbox are located on the fender for operator convenience:

  • The cup holder holds a variety of container sizes.
  • Toolbox provides convenient storage.
    • Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.
  • Cup holder and toolbox are constructed of durable acrylonitrile butadiene styrene (ABS) plastic.
Removable plug for optional 12-V outlet
Location for optional 12-V outlet Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

  • Convenient for plugging in cell phone charger and other electric devices
    • Can be used to operate electric rear equipment, such as a sprayer or spreader
12-V fast connector
Fast connector location Fast connector location

A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:

  • The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

Serviceability is convenient with easy-open hood

One-piece hood is easy to open One-piece hood is easy to open
Service interval decal located under hood Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

  • Important service points are located within easy reach.
  • A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
Easy-to-service engine fuel and oil filters Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

 

Quick response (QR) codes link to owner information web pages
Example product identification number (PIN) label with QR code Example product identification number (PIN) label with QR code

John Deere riding lawn mowers are supported by owner information web pages that include links to:

  • Safety and how-to videos
  • Operator’s manuals
  • Parts catalog
  • Maintenance reminder sheets
  • Attachments
  • Warranty statements

To speed access to owner information web pages, a QR code is printed onto a PIN label located under the hood on trim side of the steering pedestal. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy
Deck-leveling gauge and hex adjusting tool stored under tractor seat Deck-leveling gauge and hex adjusting tool stored under tractor seat
Exact Adjust access holes Exact Adjust access holes

A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.

Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

  • There is no need to reach under the fender deck while making the mower-level adjustment.
  • Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
    • Level the mower deck side to side
    • Set the correct amount of rake (front-to-back deck orientation)
    • Calibrate the cutting height to the cut-height adjusting knob setting
  • Exact Adjust simplifies leveling the mower deck if equipped with a Power Flow™ blower.
    • To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.
Deck-leveling tool placed under deck Deck-leveling tool placed under deck
Using included ball-hex tool to level mower deck Using included ball-hex tool to level mower deck

Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

  • Park the tractor on a level surface.
  • Inflate tires to the correct pressure.
  • Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.
Cut height adjusting knob Cut height adjusting knob
  • Set mower cutting-height knob to the correct deck-leveling position.
  • Adjust mower wheels as necessary so they do not contact the ground surface.
  • Remove the onboard deck-leveling gauge that is located under the seat.
  • Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.
    • Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
  • Adjust mower deck front-to-back level, if necessary.
    • Loosen rear nuts equally on each side of front lift rod.
    • Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
    • Tighten rear nuts after adjustment is complete.
  • Return the gauge to its storage position. 

 

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

Help maintain your mower and lawn with the MowerPlus™ app and connector

MowerPlus home screen MowerPlus home screen
MowerPlus maintenance screen MowerPlus maintenance screen
Overview

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Benefits
  • Engine hours, fuel level, and battery health (as compatible)
  • Mowing history with time, distance, area, and speed
  • Current day and five-day weather forecast based on location
  • Walk-through setup guides
  • Expert mowing tips
  • Useful attachments for future purchase
  • Periodic maintenance reminders
  • Safety instructions

 

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

MowerPlus Hour Meter Connector MowerPlus Hour Meter Connector
MowerPlus Deluxe Smart Connector, with a phone MowerPlus Deluxe Smart Connector, with a phone

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

 

BUC10510 MowerPlus Hour Meter Connector is for use with:

  • Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
  • Model year 2015 to 2020 S240 Tractors (serial number -880,000)
  • S100, S110, S140, and S220 Tractors

 

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

  • All S120, S130, S160, S170, and S180 Tractors
  • Model year 2021 and newer S240 Tractors (serial number 880,001-)
  • Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

 

BUC10537 MowerPlus Smart Connector is for use with:

  • Model year 2016 and newer Select Series X300 and X500 Tractors

 

All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.

 

MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.

 

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Additional details

MowerPlus connectors (sold separately)

Specifications


Compare the specifications of up to 4 models

Key Specs x380-lawn-tractor-48-in
Current Model
Engine power23 hp
17.2 kW
Oil changeNo-tools oil drain with replaceable filter
Engine manufacturer/modelFR691V
Transaxle typeK58 hydrostatic integrated with transaxle
Transaxle controlTwin Touch™ pedals
Rear tires22x11-10
Lift system typeFoot pedal with adjustable spring assist
Cutting widthAccel Deep™ mower deck, 48 in.
122 cm
U.S. warranty4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power23 hp
17.2 kW
Displacement44.3 cu in.
726 cc
Manufacturer/modelFR691V
TypeOverhead valve, full-pressure lube, oil filter
CylindersV-twin, cast-iron liners
GovernorMechanical
Choke/speed controlSeparate levers, automatic choke return
Cooling methodAir
Air cleanerDry, replaceable
Oil changeNo-tools oil drain with replaceable filter
Fuel system
TypeGasoline
Fuel deliveryPulse pump, carburetor
Fuel gaugeGauge on dash
Fuel tank locationRear
Fuel fill openingOn left fender, 3 in.
7.6 cm
Fuel tank capacity3.3 U.S. gal.
12.5 L
Electrical system
Battery12 V
340 CCA
Charging systemFlywheel alternator, regulated, 12 amp
Engine starterBendix
Hour meterYes
HeadlightsTwo standard, incandescent, 27 W
Taillights or reflectorNo
Backup lightsNo
Rear work lightsNo
12-V outletOptional
Transaxle
TypeK58 hydrostatic integrated with transaxle
ControlTwin Touch™ pedals
Cruise controlYes, button on dash
Oil coolerFins and fan on transaxle
Oil filterInternal, not replaceable
Differential lockNo
Forward speed0-6.2 mph
0-10 km/h
Reverse speed0-3.5 mph
0-5.6 km/h
BrakesInternal wet disc
Chassis
FrameWelded heavy-duty
Primer/paintE-coat/powder
Weight bracketStandard rear, optional front
Receiver hitchNo
Front axleCast iron front axle, front wheel ball bearings
Spindle bushingsNo
Front tires15x6.5-8
Rear tires22x11-10
Hood materialFully enclosed, molded-in color material reduces sound, will not rust or dent
Fender deck materialStamped steel
Floor matsSure-grip rubber
StorageYes, under seat and covered toolbox
Service interval decalYes
Fender handles/gripsNo
Cup holderYes
Equipment mountingYes, heavy duty
Maximum towing capacity600 lb
272 kg
Steering
TypeManual, sector and pinion
Four-wheel steerNot available on this model
Steering wheelLarge, 14 in.
35.6 cm
Tilt steering wheelNo
Turning radius16 in.
40.6 cm
Uncut circle radius21 in.
53.3 cm
Seat
TypeCut-and-sewn high-back
Seat back height18 in.
46 cm
ArmrestsOptional
Fore-aft adjustmentWhile seated, slide rail, 15-position, 6.6 in.
17 cm
Seat suspensionTilt, two coil springs, three-position no-tools adjustment for operator weight
Lift system
TypeFoot pedal with adjustable spring assist
Hydraulic outletsNo
Mower cut height13 positions, 1-4 in.
2.5-10.2 cm
Cut height increments0.25 in.
0.64 cm
Preset cut heightYes
Mower deck
TypeSide discharge
Cutting widthAccel Deep™ mower deck, 48 in.
122 cm
ConstructionStamped steel deck shell
Mower deck material10 gauge
0.135 in.
3.4 mm
Mower wash portYes
Mower drive systemElectric power take-off (PTO) clutch, in-line belt
Mower wheelsFour
Mower wheel adjustmentSeven-position, spring-loaded pin
Mower level adjustmentExact Adjust ports and onboard deck-leveling gauge
Mower attachability
TypeRoll under tractor
Front draft armsAttached with spring pins at two points
Rear draft armsQuick-pull pins
Mower wheels rotateYes, 90 degrees for easy mower removal
Drive systemDual belt
Safety
Meets ANSI standardYes
Meets OPEI standardYes
Backup protectionReverse Implement Option (RIO)
Safety videoYes
Buyer's notes
NotesFully enclosed, molded-in color material reduces sound, will not rust or dent
Durable E-coat primer and powder-paint finish
Warranty4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers48A (standard)
Rear bagger7, 19 bu
247, 670 L
Powered material collectionPower Flow™ blower
Mulching systemYes, MulchControl™
Front thatcher38, 46, 54 in.
96.5, 116.8, 137.2 cm
Front blade44 in.
111.8 cm
Mid-mount blade
Snow blowerTwo-stage, 44 in.
111.8 cm
Rotary broom
Rotary tiller
Sleeve hitch
3-point hitch
Rear power take-off (PTO)
Plow, moldboard
Box scraper
Cultivator
Rear blade
Disk harrow
Landscape rake
SprayerTow-behind, 15 U.S. gal.
56.8 L
Tow-behind, 25 U.S. gal.
94.6 L
Mounted, 25 U.S. gal.
SpreaderTow-behind, 25 lb
57.7 kg
Tow-behind, 175 lb
79.4 kg
Mounted, 125 lb
Front bumperStyled bumper option
Brush guardYes
Weather protectionWeather enclosure
Sun canopyYes
Rear receiver hitch
Bucket holderYes, double bucket
Grass stripingLawn striping kit
Tractor shovel40 in.
101.6 cm
Front loader
Other equipment
Tow-behind tools16
Dimensions
Height49 in.
1244 mm
Overall length72.3 in.
1836 mm
Wheelbase49.4 in.
1255 mm
Width with mower62.6 in.
1590 mm
Width with mower (deflector raised for storage)52.6 in.
1335 mm
Width without mower39.4 in.
1000 mm
WeightMower, no fuel: 651 lb
295 kg

Accessories and Attachments

Carts

7P Poly Utility Cart7P Poly Utility Cart
#

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

7P Poly Utility Cart7P Poly Utility Cart
  • The cart has a premium molded, high-density polyethylene box construction.
  • Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
  • Polyethylene body will not rust or dent; it stays looking new longer.
  • 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
  • Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
  • Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
  • Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
  • Styling is compatible with other John Deere equipment.
  • Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.
Wheels
7P Utility Cart wheel7P Utility Cart wheel
#

Wheels are mounted on a solid, one-piece axle for durability.
 
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

  • Good flotation
  • Minimal rolling resistance
  • Shock absorption
Sloped tailgate
Sloped tailgate for easy emptyingSloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch
Spring-pin tractor hitchSpring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

  • Fast, easy attachment to the tractor hitch
  • Spring pin to ensure the pin stays in place
Tilt latch
Tilt latchTilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

8Y Convertible Poly Utility Cart, push mode8Y Convertible Poly Utility Cart, push mode
8Y Convertible Poly Utility Cart, tow-behind mode 8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m3), 300-lb (136-kg) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

  • Compatible with riding lawn tractors and garden tractors
  • Durable poly construction
  • All-terrain pneumatic tires
  • Converts from tow cart to push cart without tools
  • Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
 
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck. 

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

10P Poly Utility Cart10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.


Utility carts can be used to haul a variety of materials:

  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

  • Large 650-lb (295-kg) capacity
  • 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
  • Will not dent or rust
  • 15x6 tubeless pneumatic tires with turf tread for maximum traction
  • Easy, hands-free foot pedal dump release
  • Steep dump angle for complete emptying

 

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

 

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

13 Steel Utility Cart 13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Welded boxWelded box

Welded box construction provides maximum reliability:

  • Requires less setup time than the bolted construction.
  • Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.
Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

  • Good flotation
  • Minimal rolling resistance
  • Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgateDeluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch
Spring-pin tractor hitchSpring-pin tractor hitch
Tilt-dump latchTilt-dump latch

A large-diameter hitch pin provides plenty of strength:

  • Fast, easy attachment to the tractor hitch
  • Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

  • Steep dump angle makes emptying easier.
Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear

 

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

16YS Swivel Cart16YS Swivel Cart

The 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

 

Key features include:

  • Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
  • 800-lb (363-kg) capacity makes it durable enough for the heavy jobs
    • 350 lb (158 kg) when using swivel feature to dump
  • Convenient foot pedal release for easy dumping
  • Molded stake pockets for enlarging the bed size

NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump.

 

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

 

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

16YS Swivel Cart

Order number: LP68186



Oilite is a trademark of Beemer Precision Incorporated.

17P Utility Cart17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.


Utility carts can be used to haul a variety of materials:

  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

 

Key features of the 17P Utility Cart:

  • 1,000-lb (454-kg), 17-cu ft (0.48-m3) load capacity.
  • Cart has premium molded polypropylene box construction.
  • Polypropylene body will not rust or dent, staying new-looking longer.
  • 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
  • Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
  • Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
  • Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
  • Styling is compatible with other John Deere equipment.
  • 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
  • Wheels are mounted on a solid one-piece axle.
  • Wheels turn on iron/Oilite® bushings with grease fitting for long life.
  • Spring-loaded dump latch is easy to use.

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

18 Utility Cart 18 Utility Cart

Everyone who owns a John Deere riding lawn and garden product is a potential user of a high-quality affordable utility cart.

Utility carts can be used to haul a variety of materials:

  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Durable box design
Bolt-together boxBolt-together box

Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together.

 

Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart.

Convenient emptying of box
TailgateTailgate

The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

 

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

18 Steel Utility Cart
Order number: LPHDC18JD

Oilite is a trademark of Beemer Precision, Incorporated.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear

Drawbar

1-7/8-in. (48-mm) hitch ball1-7/8-in. (48-mm) hitch ball

1-7/8-in. (48-mm) hitch ball attaches to drawbar or rear hitch to allow towing. 0.75-in. (19-mm) diameter post thread is provided.  

 

The hitch ball is available through Parts.

Magnetic hitch pinMagnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Home Maintenance Kits

LG265 home maintenance kit
Typical home maintenance kitTypical home maintenance kit

Home maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual.

 

The LG265 home maintenance kit includes the following:

 

 Quantity

 Description

 1

 Engine oil filter

 2

 Engine oil quart

 1

 Fuel filter

 1

 Air filter element

 1

 Air filter element foam

 2

 Spark plug

Mcs Chutes

Power Flow chute and blowerPower Flow chute and blower
Hopper, chute, and blowerHopper, chute, and blower

The Power Flow chute is required, along with the high-performance Power Flow blower, to use the 2-bag Power Flow material collection system. The chute includes a convenient handle and a fill indicator that tells the operator when the bags are getting full.

One chute works with several vehicle applications. Trim lines on the chute are referenced in the instructions so the chute can be cut to the proper length for the vehicle/mower application.

Power Flow chute for MC519 Cart MCSPower Flow chute for MC519 Cart MCS

The Power Flow chute is required, along with the high-performance Power Flow blower, to use the MC519 Cart MCS.

Mcs Hoppers

7-bu (247-L) hopper (cut-and-throw)7-bu (247-L) hopper (cut-and-throw)
7-bu (247-L) hopper (Power Flow™)7-bu (247-L) hopper (Power Flow™)

The 7-bu (247-L) hopper provides an efficient means of collecting grass clippings and leaves using either the cut-and-throw rear bagger or the Power Flow material collection system (MCS):

  • 38-in. (97-cm) and 42-in. (107-cm) mower decks use the cut-and-throw system.
  • 48-in. (122-cm) and 54-in. (137-cm) mower decks use the Power Flow system.

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags.

The 7-bu (247-L) MCS features:

  • 7-bu (247-L) capacity
  • Easy-to-attach lower chute (ordered separately)
  • Handle on chute
  • Air exhaust duct
  • Convenient spring-latch
  • Airflow fill indicator
  • Quik-Tatch mounting
  • Sealed hopper top
  • Loose-knit bags available
Loose-knit bagsLoose-knit bags
Close-up view of loose-knit bag materialClose-up view of loose-knit bag material

A loose-knit bag is available as an option for use with 7-bu (247-L) cut-n-throw rear baggers and Power Flow™ baggers:

  • Two loose-knit bags are required.
  • The loose-knit bag allows more air to flow through and provide more complete bag filling in wet and heavy grass conditions.
MC519 Cart with Power Flow™ blower and chuteMC519 Cart with Power Flow™ blower and chute
MC519 CartMC519 Cart

The MC519 is compatible with Select Series™ X320, X324, X340, X360, X380, X384, X390, X394, X500 Series Multi-Terrain, X700 Series Tractors, GT200, GX300, X400, and X500 Heavy-Duty Garden Tractors, and 110 through 455 Garden Tractors.

 

NOTE: MC519 is not compatible with D100 Series, LA100 Series, L100 Series, 100 Series, or Select Series model X300, X304, X310, X330, X350, X354, X370 Tractors, LT, LX, or SST Lawn Tractors, or G100 or G110 Garden Tractors.

 

The MC519 is designed to provide the versatility of two products in one - a utility cart or a material collector.

 

Utility cart:

  • 7.5 cu ft (212 L) heaped or 500 lb (227 kg) of capacity
  • Ideal for hauling topsoil, gravel, sand, firewood, mulch, etc.

 

Collector:

  • Large, 19-bu (23-cu ft, 670-L) capacity with a standard equipment cover
  • Can be equipped with a Power Flow blower and chute for vacuuming grass clippings, thatch, pine needles, and leaves

Potential customers include homeowners, commercial operators, nurseries, and estates.

Easy to hook up and operate
MC519 hitchMC519 hitch

The MC519 hitch can be connected to the tractor without tools in about one minute.

 

In combination with non-jackknifing caster wheels, this semi-rigid hitch makes it easy to maneuver the cart/collector.

 

An easy-to-reach handle allows dumping the cart/collector from the tractor seat.

 

For dumping extra-heavy loads, the operator can use the hand grip on the front of the box.

Standard equipment coverStandard equipment cover

A standard equipment cover can be installed in a matter of seconds to convert the utility cart to a collector:

  • Large plastic window in the cover allows the operator to see when the collector is full.
  • Cover folds flat for space-saving wall storage.

Specifications

 

Capacity   

Collector

 

Volume

19 bu (670 L) or 23 cu ft (0.67 m3)

Load

500 lb (226.8 kg)

Cart

 

Volume

7.5 cu ft (0.21 m3) heaped; 6 cu ft (0.17 m3) struck

Load

500 lb (226.8 kg)
Box dimensions

Width

42 in. (107 cm)

Length

30 in. (76 cm)

Depth

8 in. (20 cm)
Overall dimensions, including hitch

Width

45.5 in. (116 cm)

Length

51 in. (129.5 cm)

Depth

44 in. (112 cm)
Clearance 10 in. (25 cm)
Dump angle 50 degrees
Weight, shipping (with carton) 176 lb (80 kg)
Weight, net

Cart only

119 lb (54 kg)

Cover only

26 lb (12 kg)

Hitch only

7.7 lb (3.47 kg)
Power Flow™ dimensions

Fan diameter

13 in. (334 mm)

Fan width

2.75 in. (70 mm), 3.75 in. (95 mm) for C Series Blowers

Fan blades

4, 5 for C Series Blowers

Fan speed

3400 (will vary with mower width)
Tires 4.10x3.50 4PR
Bearings

Wheel

Iron/Oilite™ with grease fittings

Caster

Roller ball with urethane seals and grease fittings
Box material 18-gauge, 0.05-in. (1.2-mm) steel
Cover material 14-oz (0.4-kg) black vinyl-coated nylon top, front, and upper side flaps
9.5-oz (0.27-kg) black polyester knitted cloth lower sides
0.397-sq yd (0.33-m2) knitted polyester netting

 

Oilite is a trademark of Beemer Precision Incorporated.

Strong construction
MC519 Cart BaggerMC519 Cart Bagger

The MC519 has the durability to handle homeowner or commercial applications:

  • Steel support structure is mig-welded for strength.
  • Cart box is made of strong, 18-gauge, 0.05-in. (1.2-mm) steel for durability.
  • Puncture-resistant 4-ply rated (PR) turf tires are standard equipment.
  • Greaseable bearings (wheels and casters) enable long life.
  • Cover is made of tough 14-oz (397-g) black vinyl-coated nylon. The lower sides are made of 9.5-oz (269-g) black polyester knitted cloth.
Power Flow™ option (Power Flow blower and discharge chute must be ordered separately)
Power Flow blower and discharge chute optionsPower Flow blower and discharge chute options

When equipped with the optional blower and discharge chute (ordered separately), the MC519 becomes a material collection system.

The blower housing material is high-density polyethylene and the fan material is ultra-high molecular weight polyethylene:

  • Lightweight for easy handling and minimal effect on mowing smoothness
  • Will not rust or corrode
  • Resists wear and abrasion caused by sand
  • Contoured design for clean appearance and smooth grass flow
Tractor compatibility and requirements

The MC519 Cart is compatible with the following tractors with 48A and 54A Accel Deep™ Decks, 38, 46, 48, 48C Convertible, 48 Edge™ Xtra Deck, 50-, 54-, 54C Convertible, 54 Edge Xtra Deck, 60, 60-in. (152-cm) 7-Iron™, 62C Convertible, 62 Edge Xtra Deck, or 54-in. (137-cm), or 60-in. (152-cm) High-Capacity (HC) mowers:

  1. 110 and 112 Tractors (SN 100,000 and above)
  2. 200, 210, 212, 214 and 216, GT242, GT262, GT275, GT225, GT235, GT235E, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX255, GX325, GX335, GX345, and GX355 Tractors
  3. Select Series™ X320, X324, X340, X360, X380, X384, X390, and X394 Tractors
  4. X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
  5. 316, 318, 322, and 332 Tractors
  6. NOT compatible with 100, L100, LA100, D100, LT, LX, X300, X304, X310, X330, X350, X354, X370, or SST Series Lawn Tractors or G100 or G110 Garden Tractor
  7. NOT compatible with 316-332, 325-355D, GX325-GX355 Series Tractors with a 38-in. (97-cm) mower and blower assembly or 38-in. (97-cm) QT blower assembly
  8. 420 and 430
  9. 425, 445, and 455
  10. X465, X475, X485, X495, X575, X585, and X595 Heavy-Duty Garden Tractors (HDGT's)
  11. X700, X720, X724, X728, X729, X740, X744, X748, X749
  12. X710, X730, X734, X738, X739, X750, X754, X758
  13. NOT compatible with tractors (X400/X500 HDGT's or X700 Tractors) that have the 3-point hitch or 540 power take-off (PTO) shift arm attached
  14. 325/345 with 38-in. (97-cm) mower and Power Flow system requires M118053 arm

Requirements and/or recommendations:

1. Four 200 lb (91 kg) cast-iron rear wheel weights are recommended for ballast on GT242, GT262, GT275, GT225, GT235, GT245, 240, 245, 260, 265, 285, 320, 325, 335, 345, 355D, GX325, GX335, GX345, GX355, X500, X520, X534, and X540 Tractors when operating on slopes. Select Series X320, X324, X340, X360, X380, X384, X390, and X394 Tractors may need ballast to increase traction, stability, or steering, especially when operating on hillsides or if carrying heavier materials in the MC519 Cart. 
2. 420 and 430 Tractors require one AM118915 60-in. (152-cm) Power Flow installation kit for mounting 60-in. (152-cm) Power Flow blower.
3. 316, 318, 322, 330, 332, 420, 430 require black hitch mounting bracket M115521.

Required on MC519 (S/N 045001 - ) to mount on the following Tractors:

  • 316, 318, 322, 330, 332, 420, and 430
  • 425 Two Wheel Steer (- A040774) without 3-Point Hitch
  • 425 All Wheel Steer (- B040203) without 3-Point Hitch
  • 445 (- C040542) without 3-Point Hitch
  • 455 Two Wheel Steer (- C040507) without 3-Point Hitch
  • 455 All Wheel Steer (- D040074) without 3-Point Hitch

This bracket was included in older MC519's but was eliminated when the 425, 445 and 455 Tractors hitch design was changed and the bracket was no longer required for hookup.

4. GT, 300 and GX 48C Mowers built before April 2002 may need 0.5-in. (13-mm) hole drilled in mower wheel bracket for installing BM20667 or BM21495 48C HP Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.

5. GT, 300 and GX 48C Mowers built after April 2002 may need slot added to mower wheel bracket for installing BM19439 and BM20523 QT Blower. See Service Information Bulletin 02-11-45-7 for detailed instructions.

6. X400/X500 HDGT's and X700 Ultimate Tractors require LP52039 Adaptor Kit for MC519 Cart, available from Order Zone.

7. X400/X500 HDGT's and X700 Ultimate Tractors with a 48C/48X Mower require BM20976 or BM22798 48 HP Adapter Kit to install BM20667 48C High-Performance Power Flow Blower Assembly to accommodate this mower's rotateable wheels:

  • One BM20976 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48C or 48X Mower Deck (SN -050588) with wheels that rotate.
  • One BM22798 48C/48X High Performance Blower Assembly Adapter Kit is required to install the BM20667 48C HP Power Flow Blower on a 48X Mower Deck (SN 050589- ) with wheels that rotate.

8. The following older 425, 445, and 455 Tractors without a 3-point hitch also require black hitch mounting bracket M115521:

  • 425 two-wheel steer (A040774 and below)
  • 425 all-wheel steer (B040203 and below)
  • 445 (C040507 and below)
  • 455 two-wheel steer (C040507 and below)
  • 455 all-wheel steer (D040074 and below)

9. BM20668 54C and BM20669 62C HP Power Flow Blowers require one AM133822 Mower Wheel Adjustment Pin for installation on 2004 and later 54C or 62C Mowers.

NOTE: In order to be used as a material collection system, an optional Power Flow blower and discharge chute must be ordered in addition to the LP49228 MC519 Material Collection System.

Ordering information

Customers, please contact a local John Deere dealer for availability and pricing information.

 

MC519 Material Collection System
Order number: LP49228

Dump from the seat capability for X300 Series Tractors
MCS 7MCS 7
#

The MCS 7 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere X300 Series Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere MCS, installation is a breeze with simple hand tools.

 

Features:

  • Lightweight aluminum construction
  • Designed for full material expulsion
  • Easy access self-latching spring tripped handle
  • Ships almost fully assembled (5 minute handle assembly)
  • Installs in seconds (after initial assembly)

Benefits:

  • Easy - Convenient Access to dump handle directly from seat 
  • Clean - No material handling, no mess 
  • Efficient - Unload and go without leaving the seat 

NOTE: Fits John Deere X300 Series 2-bag material collection systems. Not compatible with EZtrak Zero-Turn Mowers or the X300R Rear Discharge Tractor.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

MCS 7 attachment
Order number: LP47168

Mcs Power Flow Blowers

HP Power Flow blower assemblyHP Power Flow blower assembly

The high-performance (HP) Power Flow blower assembly for the 48-in. (122-cm) Accel Deep™ Mower is used with the hopper and chute to provide a very effective material collection system. A hopper and chute must be ordered separately to complete this material collection system.

Miscellaneous

12-V outlet12-V outlet

The 12-V outlet kit can be installed on the tractor to provide power for various 12-V equipment.

Tractor shovel in raised positionTractor shovel in raised position
Tractor shovel in emptying positionTractor shovel in emptying position

The 40-in. (102-cm) Tractor Shovel expands the usefulness of any John Deere Select SeriesTM X300 or X500 Multi-Terrain Tractor by allowing it to pick up and move material. It utilizes a high-capacity electric actuator that provides lift, lower, dump, and down force functions. No front blade is required.

The tractor shovel takes the back-breaking labor out of jobs like moving mulch, spreading gravel, ground grading, and more. It installs using the tractor's existing frame holes. After initial installation, it can be removed or installed without tools.

The innovative opening design of the tractor shovel, combined with the lift height, assures complete emptying of material. The tractor shovel can also be used for scraping and grading by locking the shovel in the raised position.

Tractor recommendations and requirements:

  • Rear tractor ballast recommended for improved traction
  • Tire chains recommended for moving snow
  • No tractor requirements

 Key features:

  • Can be used when upper part of shovel is locked in the raised position as a blade (without angling capability)
  • Raised and lowered with electric actuator
  • Provides down force to increase scraping effectiveness of blade
  • Pick-up, transport, and empty a variety of loose material including soil, gravel, mulch, and snow
  • Can be removed in 10 minutes or less

Compatibility:

  • LP63767 40-in. (102-cm) Tractor Shovel is Compatible with:
    • Select Series X300, X300R, X304, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
    • Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

 

Unique shovel design
40-in. (102-cm) Tractor Shovel (with optional brush guard)40-in. (102-cm) Tractor Shovel (with optional brush guard)
Shovel opens for emptying material or bladingShovel opens for emptying material or blading

The unique design of the 40-in. (102-cm) Tractor Shovel allows an operator who has a Select Series™ X300 Series (including X300R and X350R) or X500 Series Multi-Terrain Tractor to use the tractor shovel for lifting and moving material as well as for typical blade functions (without blade angling), such as blading, leveling, and scraping:

  • Unique shovel design empties material completely.
  • Shovel can be locked in the raised position for blading applications.
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tractor Shovel
Order number: LP63767

Tractor compatibility and requirements

The 40-in. (102-cm) Tractor Shovel is compatible with the following tractors:

  • Select Series X300, X300R, X304, X310, X320, X324, X330, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
  • Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Requirements and/or recommendations:

  1. Rear ballast is recommended for best performance.
  2. Tire chains are helpful and recommended when operating in snow.
Operation
Operator station viewOperator station view
Control panelControl panel

The tractor shovel is operated from the tractor seat with the use of a control rod and an electric switch.

Electric actuator powers the tractor shovelElectric actuator powers the tractor shovel

An electric actuator provides power to raise, lower, and empty the shovel.

To raise or lower the tractor shovel, use the electric switch on the tractor shovel panel.

Depress the bottom of the switch to raise the shovel and depress the top of the switch to lower the shovel.

Control rod for opening/closing of the shovelControl rod for opening/closing of the shovel
Shovel in dump positionShovel in dump position

To open the shovel for emptying, raise it completely and then pull the control rod to the yellow area of the rod and press the upper end of the electric switch.

To close the shovel, press the lower end of the electric switch until the control rod releases to the black area of the rod.

Operation of the shovel for blading or leveling
Hand lift for locking into the blading positionHand lift for locking into the blading position
Blading latch in the locked position Blading latch in the locked position

To use the tractor shovel for blading, use the handle on the right side of the shovel to raise it and then use the locking lever to lock it in the raised position.

 Specifications

 

Length of tractor shovel

40 in. (101.6 cm)

Depth of tractor shovel

11 in. (27.9 cm)

Capacity

1.7 ft3 (48 L)

Cutting blade material

0.250-in. (6.4-mm) hardened steel

Material thickness, shovel

0.125 in. (3.2 mm)

Load capacity

150 lb (68 kg), evenly distributed

Lift height

4 in. to 6 in. (10.2 cm to 15.2 cm), depending on the tractor model

Shipping weight

110 lb (50 kg)

Warranty

One-year limited warranty on parts

Battery chargerBattery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

  • Automatically determines if the battery is 6- or 12-V and adjusts accordingly
  • Helps maintain battery in good condition and ensures it is fully charged
  • Powers on to charge battery and powers off when fully charged
  • 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
  • 1.5-amp trickle charges small batteries in 2 to 12 hours
  • Maintains large battery charges
  • Hookup protection guards battery and charger from damage 

 

Includes a choice of battery connection methods:

  • Standard color-coded clips to connect to any battery
  • Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use
Double bucket holder (buckets ordered separately)Double bucket holder (buckets ordered separately)

Transporting mulch, plants or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Ultimate™ Series Tractor. It is designed to carry up to 70 lb (32 kg) of material.

 

For use with standard 5-gal. (19-L) buckets - ordered separately. 

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (double)
Order number: LPJD301

Bucket (5-gal.)

Order number: LPJD400 (2 required)

Double bucket holderDouble bucket holder

Transporting mulch, plants, or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Series Tractor. It is designed to carry up to 70 lb (32 kg) of material for transporting mulch, plants, yard waste, or for adding ballast.

For use with the included John Deere 5-gal. (19-L) buckets.

NOTE: May not fit all tractor models with a weather enclosure or cab installed.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (double) with buckets
Order number: LPJD301W

5-gal. (19-L) bucket5-gal. (19-L) bucket

This black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket - 5 gal. (19-L)
Order number: LPJD400

8-oz (237-mL) Fuel-Protect gasoline stabilizer8-oz (237-mL) Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round: 

  • Has corrosion preventers
  • For lawn and garden equipment and other gasoline-powered vehicles
  • Ensures quick starts in all two- and four-cycle engines
  • Use in gasoline, gasoline-oil mixture, and ethanol blends
  • Use to treat gas cans at each fill-up or use at every fill-up of vehicle
  • Keeps fuel fresh for 12 months
  • Contains a fuel injector and carburetor cleaner
  • 1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit JDParts.

Helpful tips:

  • Add fuel stabilizer every time fuel is purchased.
  • Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
  • John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
  • Use plastic fuel containers to store fuel; ask a local John Deere dealer.
  • For best results, use a spill-proof gas can that automatically seals the gas can vent.
  • Store fuel in a cool, dry, dark place in a sealed fuel can.
  • Fill tank to the top every time the machine is put away.
    • Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine. 

For more information on fuel, visit John Deere Groundscare.

Smart connectorSmart connector

The John Deere MowerPlus smart connector wirelessly links a Select Series X300 or X500 Tractor to the MowerPlus app on a mobile device:

  • No tools are needed for installation.
  • Detailed set-up instructions are included.
  • The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
  • The wireless connector and app work together to offer helpful information.

 

Tractor features available for viewing on the MowerPlus app include:

  • Tractor engine hours automatically synchronized to the app
  • In-app maintenance reminders and log, based on engine hours
  • Fuel level - even when away from the tractor, the app remembers information, like the fuel level, from the last synchronization.
    • When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
  • Help to determine the best time to mow
  • Expert pre-mow optimization tips
  • Maintenance walk-through instructions

 

The operator is able to visit their device’s app store to see new app features as they are added.

Since the smart connector communicates instrument cluster information, future app releases will be able to provide additional operating recommendations and notifications.

MowerPlus smart connector (BUC10537) for Select Series X300 and X500 Tractors
Smart connector, wiring harness, and twist tiesSmart connector, wiring harness, and twist ties

One end of the wiring harness plugs into the back of a Select Series X300 or X500 Tractor instrument cluster. The other ends plug into the smart connector and the tractor's wiring harness.

Compatibility and requirements

MowerPlus smart connector (BUC10537) is for model year 2016 and later Select Series X300 and X500 Tractors.

MowerPlus smart connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:

  • iOS® version 10 or higher is compatible with the smart connector.
  • Android™ version 5.1 or higher is compatible with the smart connector.

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Seat net kitSeat net kit

Seat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.

Compatibility kit partsCompatibility kit parts
Updates a model year 2006-2015 44-in. (112-cm) Snow Blower, 47-in. (119-cm) Snow Blower, or 48-in. (122-cm) Front Blade for use on a model year 2016 Select Series™ X300 or X500 Mult-Terrain Tractor.

Mower Blades

Side-discharge blade/mulching bladeSide-discharge blade/mulching blade
 
Side-discharge blade/mulching bladeSide-discharge blade/mulching blade
 

Mower Decks

Dry-condition kit componentsDry-condition kit components
Dry-condition kit installed on mower deckDry-condition kit installed on mower deck

The BM26238 dry-condition kit, 48A is available for 48A Accel Deep Mower Decks used on S240 Tractors, model year 2016 and later X300 and X500 Select Series™ Tractors and Residential ZTrak™ Mowers. The 48A dry-condition kit will also work with any X700 Signature Series Tractor (model year 2013 and later) that is equipped with a 48A Mower Deck.

The dry-condition kit will reduce the amount of blowout around the mower deck when side discharging, mulching, or bagging in dry grass and leaf conditions. For optimum mowing performance in lush-grass conditions, the dry-condition kit baffles may be removed.

Similar grass groomer shown - top viewSimilar grass groomer shown - top view
Similar grass groomer shown - side viewSimilar grass groomer shown - side view
Features and benefits
  • Homeowners can now achieve results just like the professionals
  • Brush is easy to adjust for varying mower cutting height
  • Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
  • The brush striping kit is a very economical and functional attachment

Compatible with the following:

  • 48A or 54A - 48-in. (122-cm) or 54-in. (137-cm) Side-Discharge Mower for X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and X590 (model year 2016) Tractors
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

48A or 54A - 48-in. (122-cm) and 54-in. (137-cm) grass groomer

Order number: LP63761

Mower deck leveling gaugeMower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

  • Lawn tractors
  • Lawn and garden tractors
  • Riding mowers
  • Front mowers
  • Commercial walk-behind mowers
  • Zero-turn-radius mowers

Mulch Kits

MulchControl advantages and benefits
Z535M ZTrak™ with Accel Deep 48A MowerZ535M ZTrak™ with Accel Deep 48A Mower
X730 Tractor with 48A Mower DeckX730 Tractor with 48A Mower Deck

The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings
How MulchControl works
MulchControl baffle open (similar mower from X700 Series Tractor shown)MulchControl baffle open (similar mower from X700 Series Tractor shown)
MulchControl baffle closed (similar mower from X700 Series Tractor shown)MulchControl baffle closed (similar mower from X700 Series Tractor shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
    • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
    • When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired
MulchControl baffle closedMulchControl baffle closed
MulchControl handleMulchControl handle
  • The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
    • The operator is required to get off of the machine in order to engage or disengage mulch mode.
  • Changing from mulching to side discharging or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

  • Usually mulch, but side discharge when grass gets too long
  • Usually side-discharge, but would like to be able to close the chute to control clippings
  • Always mulch a main lawn, but often side discharge secondary lawns
  • Bag clippings, but want to go farther before emptying bags
    • With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.

MulchControl advantages and benefits
Mower equipped with electric one-touch MulchControlMower equipped with electric one-touch MulchControl
MulchControl switchMulchControl switch

The 48-­in. (122­-cm) electric one-touch MulchControl attachment enhances versatility and productivity. A mower deck equipped with electric one-touch MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted to side discharge or mulch mode with the touch of a switch:

  • Easily converts while mowing from side discharge mode to mulch mode or vice versa
  • In mulch mode, controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.)
  • Reduces cleanup time needed to dispose of clippings
  • Will reduce the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material because of the additional baffles under the mower deck
How electric one-touch MulchControl works

A tractor equipped with the electric one-touch MulchControl attachment delivers unprecedented levels of productivity and versatility. A convenient, dash-mounted switch provides operators the ability to change between side discharging and mulching. A heavy-duty baffle opens and closes easily with the touch of the dash-mounted switch.

MulchControl electric switchMulchControl electric switch
MulchControl electric actuatorMulchControl electric actuator

A dependable electric actuator is used to close and open the discharge baffle. The mower deck can easily be converted from side discharge mode to mulch mode or vice versa in a few seconds by activating the switch.

MulchControl baffle open (similar mower deck shown)MulchControl baffle open (similar mower deck shown)
MulchControl baffle closed (similar mower deck shown)MulchControl baffle closed (similar mower deck shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • The MulchControl baffle, or divider, between the left and middle spindles is about halfway down. The height is designed to balance the mulch and side discharge modes.
    • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
    • When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
  • The MulchControl electric switch is located on the tractor dash to open and close the discharge baffle.
    • The operator is not required to get off of the machine in order to engage or disengage mulch mode.

MulchControl is well suited to the following mowing situations:

  • For operators who usually mulch, but side discharge when grass gets too long
  • For operators who usually side discharge, but would like to be able to close the chute to control clippings
  • For operators who always mulch a main lawn, but often side discharge secondary lawns
  • For operators who bag clippings, but want to go farther before emptying bags (48A and 54A Mower Decks only)

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when desired.

With electric one-touch MulchControl, operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require:

  • When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
  • When a breeze might blow clippings back onto the operator
  • For side discharge mowing only the areas of the property where grass is too tall or thick for mulching
  • With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
    • With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
    • Models equipped with a 42A Mower Deck require a MulchControl baffle be removed to install the bagger chute; see 42A versatility explanation for more information.

Advantages of MulchControl include:

  • Performance is improved.
    • Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
    • Clippings are much smaller, which allows them to fall into the grass and be removed from view.
    • Unsightly grass clippings are not blown onto driveways or into flower beds.
    • Fertilizer use is reduced and provides associated environmental benefits.
  • Uptime is increased.
    • Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
    • Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall or thick to mulch effectively.
  • Cost of operation is reduced.
    • Controlling clipping dispersion reduces cleanup time.
MulchControl limitations

While in the side discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean­up is desired
Compatibility

This electric one-touch MulchControl attachment is field installed and compatible with any 48A Mower installed on an X300 or X500 Select Series Tractor.

NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Protection

Brush guardBrush guard

The brush guard adds a distinctive appearance to the tractor and protects the front of the tractor from damage.

Brush guard lowered to permit opening hoodBrush guard lowered to permit opening hood

By removing one spring clip and pin, the brush guard may be lowered to permit opening the hood.

Front bumperFront bumper

The front bumper adds a distinctive appearance to the tractor and protects the front of the tractor from damage.

Features include:

  • Bumper can be easily mounted to the front of the tractor.
  • Bumper can remain on the tractor when the front blade or snow blower are used.
Protective cover (large deluxe)Protective cover (large deluxe)

Cover provides heavy-duty protection for Select Series™ X300, X500, and X700 Tractors.

Features include:

  • Wipe-clean reinforced bottom around mower deck
  • Easy-on side handles makes snugging down cover a snap
  • Dual reinforced air vents let air circulate and help prevent ballooning in wind
  • Interior lining and integrated muffler heat shield
  • Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
  • Easy-on split back for fast fitting and easy access after installation
  • Handy storage pocket reverses into an attractive storage case
  • Two-year warranty
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (large deluxe)

Order number: LP93647

Protective cover (standard)Protective cover (standard)
#

Features include:

  • Dual vents let air circulate and help prevent ballooning in wind
  • Elastic shock cord in bottom hem for a quick, custom-like fit
  • Coated fabric for maximum water protection
  • One-year warranty

Cover provides all-season protection for 100 Series, S240 and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Protective cover (standard)

Order number: LP93917

Seat cover, deluxe mediumSeat cover, deluxe medium
#

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

  • Access to lumbar adjustment controls
  • Large-capacity rear-zippered cargo pocket
  • Two side mesh beverage pockets
  • Elastic cord in bottom hem for a custom fit
  • Medium size fits seats with backrests up to 15 in. (38.1 cm)
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe medium
Order number: LP92624

Seat cover, standard mediumSeat cover, standard medium
#

Seat cover protects new seats and renews old seats:

  • Cushioned seat for extra comfort
  • Four convenient pockets for keeping tools and gear within reach
  • Elastic cord in bottom hem for a custom fit
  • Medium size fits seats with backrests up to 15 in. (381 mm)
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

Spanish North American Kit

Spark Arrester

Spark arresterSpark arrester

Spark arrester is available to meet the law in the State of California requiring use of a spark arresting muffler under certain conditions.

Applies in other states and Canada when needed to comply with local ordinances or customer requests.

NOTE: This law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except watered lawns) without a spark arrester. For further information on this law, consult No. 4442.5 of the California Public Resources Code.

Sprayers

25-gal. (95-L) Mounted Sprayer shown on X300 Tractor25-gal. (95-L) Mounted Sprayer shown on X300 Tractor

Features and benefits:

  • 100-psi (689-kPa) SHURflo® diaphragm-type pump is designed for high-hour commercial applications; it can be run dry without damage.
  • It is easy to assemble the custom mounting brackets.
    • Brackets use the existing frame holes.
  • Brass-tipped spray wand is included as standard equipment; it is constructed of noncorrosive polypropylene material with Viton® components for multi-use applications.
  • Check valves in the boom tips prevent siphoning and dripping, which can cause lawn spotting.
  • Control valve directs spray to either the boom or spray wand for added convenience
    and versatility.
  • Electrical hookup is simple with a convenient on/off switch.
  • Sprayer contains a rugged translucent-yellow tank with molded fill-level indicators (in gallons).
  • It is only a 15-second no-tools mounting after assembly.

Specifications

 Item number LP22861
 Tank capacity 25 gal. (95 L)
 Boom 60-in. (152.4-cm) boom, 90-in. (228.6-cm) spray
 Spray wand reach 30 ft (9.1 m)
 Hose length 19 ft (8 m)
 Shipping weight 35 lb (16 kg)
 Warranty 2-year consumer warranty
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Mounted Sprayer for X300 and X500 Tractors

Order number: LP22861

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

15-gal. (57-L) Tow-Behind Sprayer15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

  • This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
  • Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
  • A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

  • Sprayers provide an excellent way to apply liquid fertilizer.
  • Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

  • Fertilizer is more readily available to plants.
  • The fertilizer need not be worked into the soil by watering or rain before it will work.
  • Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

25-gal. (95-L) Tow-Behind Sprayer25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

  • 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
  • Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
  • Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
  • The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties.

  • Sprayers provide an excellent way to apply liquid fertilizer.
  • Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

  • Fertilizer is more readily available to plants.
  • The fertilizer need not be worked into the soil by watering or rain before it will work.
  • Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

Spreaders

Mounted electric spreaderMounted electric spreader

The mounted electric broadcast spreader for Select Series and Signature Series Tractors is ideal for medium- to large-size jobs and can be used to apply fertilizer, weed killer, sand, lime, and de-icer:

  • Compatible with X300 and X500 Select Series and X700 Signature Series Tractors
    • X300 Series Tractors must be equipped with 35-lb (16-kg) front wheel weights or front weight bracket and two 42-lb (19.1-kg) Quik-Tatch weights.
    • The electric broadcast spreader is not compatible with the X300R Rear Discharge Tractor.
    • When used on X700 Series Tractors, the spreader is not compatible with the weather enclosure, cabs, rear receiver hitch, or 3-point hitch.

Key features are as follows:

  • 125-lb (57-kg) capacity injection molded poly hopper
  • Durable welded, powder-coat frame
  • Ice-melt capability
  • Gear motor with 5-to-1 reducer
  • Stainless-steel shutoff plates
  • Directional control
  • Hopper cover is standard equipment
  • Available option: Barrier shield, 125-lb (57-kg) spreader
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Select Series Electric Spreader

Item number: LP35439

Spreader barrier shieldSpreader barrier shield

The barrier shield is used to direct product downward (36-in. [914-mm] width), converting the rotary spreader into a drop spreader. Perfect for ice melt and salt spreading, or for targeting specific areas.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb electric broadcast spreader barrier shield
Order number: LP23117

 

125-lb (57-kg) Pull-Type Spin Spreader 125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

  • Seed
  • Fertilizer
  • Insecticide
  • Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

  • Positive on/off system (no cables)
  • 125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
  • 13-in. (33-cm) pneumatic tires for easy rolling
  • Enclosed gearbox (metal gears)
  • Ergonomic dual handle featuring Accu-way™
  • Accu-way even spread pattern adjustment
  • Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening
Hopper screen and throat openingHopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner
SpinnerSpinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control
Dial-A-Matic rate controlDial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

  • Dial position locks and unlocks automatically.
  • More than 80 settings provide an accurate application of materials.
Specifications

 

 125-lb (57-kg) Pull-Type Spreader175-lb (79-kg) Pull-Type Spreader
Recommended marketHomeownerHomeowner
TypeTow-behindTow-behind
Bundle numberLP25353 
Box capacity125 lb (57 kg), 2.5 cu ft (0.07 m3)175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)14.5x25.25x19.75 (36.8x64.1x50.2)18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
HopperPolyethylenePolyethylene
Hopper screenAluminumAluminum
Hopper bottom plateStainless steelStainless steel
Throat opening, in. (cm)0.81x2.75 (2.1x7)0.81x2.75 (2.1x7)
Connecting hardwareStainless steelStainless steel
Accurate application
Rate control80-setting Dial-A-Matic knob80-setting Dial-A-Matic knob
Rate gateNo-stick nylonNo-stick nylon
Rate gate linkageStainless steelStainless steel
Even dispersal
Spinner, in. (cm)12 (366)12 (366)
Spread pattern, ft (m)10 to 12 (3.1 to 3.7) wide10 to 12 (3.1 to 3.7) wide
Spread pattern equalizerAccu-way™Accu-way
Spinner shaftZinc-plated steelZinc-plated steel
Rotary agitatorStainless steelStainless steel
Miscellaneous
FramePowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steelPowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)18 (45.7)18 (45.7)
Drive gearsHeavy-duty die-cast metalHeavy-duty die-cast metal
Axle0.63-in. (15.9-cm) solid steel, zinc plated0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires13-in. x 5-in. (33-cm x 13-cm) pneumatic13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed3.5 mph (5.6 km/h)3.5 mph (5.6 km/h)
WarrantyOne-year limitedOne-year limited
Net weight, lb (kg)29 (13.2)34 (15.4)

 

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

175-lb (79-kg) Pull Spreader175-lb (79-kg) Pull Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

  • Seed
  • Fertilizer
  • Insecticide
  • Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

  • Positive on/off system (no cables)
  • 175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
  • 13-in. (33-cm) pneumatic tires for easy rolling
  • Fully enclosed gear box with metal gears for long life
  • Accu-way even spread pattern adjustment
  • Includes screen and cover

 

Hopper screen and throat opening
Hopper screen and throat openingHopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner
SpinnerSpinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control
Dial-A-Matic rate controlDial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

  • Dial position locks and unlocks automatically.
  • More than 80 settings provide an accurate application of materials.
Specifications

 

 125-lb (57-kg) Pull-Type Spreader175-lb (79-kg) Pull-Type Spreader
Recommended marketHomeownerHomeowner
TypeTow-behindTow-behind
Bundle numberLP25353 
Box capacity125 lb (57 kg), 2.5 cu ft (0.07 m3)175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)14.5x25.25x19.75 (36.8x64.1x50.2)18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
HopperPolyethylenePolyethylene
Hopper screenAluminumAluminum
Hopper bottom plateStainless steelStainless steel
Throat opening, in. (cm)0.81x2.75 (2.1x7)0.81x2.75 (2.1x7)
Connecting hardwareStainless steelStainless steel
Accurate application
Rate control80-setting Dial-A-Matic knob80-setting Dial-A-Matic knob
Rate gateNo-stick nylonNo-stick nylon
Rate gate linkageStainless steelStainless steel
Even dispersal
Spinner, in. (cm)12 (366)12 (366)
Spread pattern, ft (m)10 to 12 (3.1 to 3.7) wide10 to 12 (3.1 to 3.7) wide
Spread pattern equalizerAccu-way™Accu-way
Spinner shaftZinc-plated steelZinc-plated steel
Rotary agitatorStainless steelStainless steel
Miscellaneous
FramePowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steelPowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)18 (45.7)18 (45.7)
Drive gearsHeavy-duty die-cast metalHeavy-duty die-cast metal
Axle0.63-in. (15.9-cm) solid steel, zinc plated0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires13-in. x 5-in. (33-cm x 13-cm) pneumatic13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed3.5 mph (5.6 km/h)3.5 mph (5.6 km/h)
WarrantyOne-year limitedOne-year limited
Net weight, lb (kg)29 (13.2)34 (15.4)


Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

40-in. (102-cm) Tow-Behind Aerator Spreader40-in. (102-cm) Tow-Behind Aerator Spreader
#

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

  • 40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
  • 132 steel-tine tips on 8-in. (20-cm) diameter tine stars
  • Three-position, full-sized lift lever
  • Direct spreader drive for consistent performance
  • Adjustable flow control
  • 100-lb (45-kg) spreader capacity
  • 4.10/3.5-4 pneumatic tires for easy pulling
  • 75-lb (34-kg) capacity weight tray
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications 

Width 40 in. (101.6 cm)
Aerator depth Up to 2 in. (5.1 cm), two positions
Spreader capacity 100 lb (45 kg)
Tines
Number of tips132
Diameter8 in. (20.3 cm)
MaterialSteel
Lift adjuster Manual
Wheels 4.10/3.5-4, pneumatic
Drive Direct
Weight-tray capacity 100 lb (45 kg)
Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
    The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

130-lb (59-kg) Pull-Type Spin Spreader 130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

 

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Broadcast SpreaderBroadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

  • The polyethylene hopper will not dent or rust.
  • All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
  • Large pneumatic turf tires ensure a positive drive and smooth operation.
  • High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
  • Fully enclosed gearbox eliminates downtime and maintenance.
  • Autoflow feature stops the flow of materials - automatically - to prevent burns.
  • Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun Protection

Sun shade for Select Series X300 and X500 TractorsSun shade for Select Series X300 and X500 Tractors
Sun shade installs on heavy-duty CargO MountsSun shade installs on heavy-duty CargO Mounts

The sturdy sun shade provides an effective way to keep the sun off of the operator for more comfortable warm-weather operation of the tractor:

  • Frame is made of strong 1.25-in. (32-mm) diameter steel tube with 0.063-in. (1.6-mm) wall thickness.
  • The sun shade mounts to the heavy-duty CargO Mount™ system.

    • Sun shade includes the 4-wheel-steer rear weight bracket to provide a sturdy
      Quik-Tatch mounting system.
      • Holds up to two 42-lb (19-kg) Quik-Tatch weights on X300 Series Tractors
      • Holds up to four 42-lb (19-kg) Quik-Tatch weights on X500 Multi-Terrain Tractors
  • Cloth top measures 32-in. (81.3-cm) long by 34-in. (86.4-cm) wide.
  • Rear panel is made of cloth mesh material to provide additional protection from the sun while permitting the operator to see through it.
  • Two bolts with hand knobs on the mounting posts allow easy removal of the sun shade.
  • Elastic strap with clip is included to hold the 7-bu (247-L) hopper top open when the hopper is installed.
  • Overall height to the top of the sun shade is 72 in. (182.9 cm).

 

The sun shade is compatible with the following:

  • Select Series™ X300, X304, X320, X324, X340, X350, X354, X360, X370, X380, X384, X390, and X394 Tractors
  • Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Ordering Information

Please contact your local John Deere dealer for availability and pricing information.

 

X300/X500 Sun Shade

Order number: BM23054

Sun shade installed using 7-bu (247-L) bagger bracketSun shade installed using 7-bu (247-L) bagger bracket

The 7-bu (247-L) 2-bag hopper or 14-bu (493-L) 3-bag hopper can be installed and used with the sun shade installed. The sun shade installation instructions explain how to install the hoppers with the sun shade.

Thatchers

Front thatcherFront thatcher
Front thatcherFront thatcher

The thatcher, used on a regular basis, reduces excessive thatch buildup that can be damaging to a lawn's health.
 
Since it provides more gentle, less aggressive action than a power rake, it can be used as a preventive maintenance tool each time the lawn is mowed.

Ordering information

 

Please contact a local John Deere dealer for availability and pricing information.

38-in. (97-cm) Front Thatcher

Order number: LP48004

8-in. (20-cm) thatcher extension for wider widths8-in. (20-cm) thatcher extension for wider widths

An 8-in. (20-cm) extension is available to provide widths of 46 in. (117 cm) and 54 in. (137 cm) (Add an extension to one end of front thatcher to make it 46-in. [117-cm] wide; add an extension to both ends for a 56-in. [142-cm] width.)

Front thatcher installed on X534 TractorFront thatcher installed on X534 Tractor

A thatcher mounting frame is required to install the 38-in. (97-cm) front-mounted thatcher on a vehicle.

40 in. (102-cm) Tow-Behind Thatcherator40 in. (102-cm) Tow-Behind Thatcherator
#

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

  • 40-in. (102-cm) width to cover ground fast
  • 20 spring-loaded tines for maximum performance
  • Three-position adjustment
  • Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 40 in. (101.6 cm)
Tines
Number20, spring-loaded tips
Diameter0.19 in. (0.5 cm)
MaterialSteel
Weight tray capacity100 lb (45 kg)
Lift adjuster Three positions
Wheel
Size8 in. (20.3 cm)
TreadRib
MaterialSteel
Optional extension 8 in. (20.3 cm)


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

Tire Chains

TerraGrip Traction BeltTerraGrip Traction Belt
#

Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.

Features:
  • Rubber slats surround the tire and will not damage driveways or sidewalks.
  • No steel touches the driving surface.
  • No-tools installation utilizes a traditional steel chain attachment system.
  • Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
  • TerraGrip Traction Belts are approved for John Deere X300, X500 M-T, and X700 Series Tractors.

Additional information for 4-wheel-steer tractor models:

  • X700 Series – requires wheel spacer sold separately
  • X500 Series – requires wheel stop adjustment
  • X300 Series – no additional requirements
Tire chain with optional wheel weights on X728 TractorTire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using attachments such as a snow blower or front blade.

One pair of chains is included in each bundle.

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, and E120 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, and E180 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

Tow Behind

42-in. (107-cm) Lawn Sweeper42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

  • 42-in. (107-cm) clearing width
  • 17-bu (599-L) capacity to make fast work of picking up material
  • Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
  • Hitch has seven positions to match up correctly with a variety of vehicles
  • Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
  • A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Brush heightSweeping conditions
Ground level to 1 in. (25 mm) aboveSmooth surfaces - driveways, parking lots, and
sidewalks
1 in. (25 mm) to 2 in. (50 mm)Mowed lawns under normal conditions, or light
leaves
2 in. (50 mm) to 3 in. (75 mm)High grass, heavy leaves, or heavy grass clippings

 

 

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD

44-in. (112-cm) Lawn Sweeper44-in. (112-cm) Lawn Sweeper
#

The 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

  • 44-in. (112-cm) clearing width
  • 17-bu (599-L) capacity to make fast work of picking up material
  • Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
  • Hitch has seven positions to match up correctly with a variety of vehicles
  • Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
  • A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Brush heightSweeping conditions
Ground level to 1 in. (25 mm) aboveSmooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)High grass, heavy leaves, or heavy grass clippings

 

 

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038

Dethatcher kit for sweeperDethatcher kit for sweeper
#

This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.

 

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Dethatcher kit for sweeper

Order number: LP42108

Multi ToolMulti Tool
#

The Multi Tool includes one platform and two separate attachments, saving space and money.

 

  • Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
  • Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
  • Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
  • Elongated handle - makes it easier to raise into transport or lower for use
  • Spring assisted lever - makes changing the attachments quick and easy


John Deere has combined the best lawn tools into one package.

Two-year warranty.

 

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

Multi Tool

Order number: LP39089

36-in. (91-cm) Tow-Behind Lawn Roller36-in. (91-cm) Tow-Behind Lawn Roller
#

The Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:

  • 36-in. (91-cm) wide polyethylene drum
  • 390-lb (177-kg) weight for excellent leveling
  • Rounded end caps to reduce gouging
  • 42-U.S. gal. (159-L) capacity
  • Long-lasting Nylatron® bearings

Nylatron is a trademark of QUADRANT AG or its affiliates or licensors.

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 36 in. (91 cm)
Roller
Size36 in. x 18 in. (91 cm x 46 cm)
Capacity42 U.S. gal. (159 L)
Weight (filled)390 lb (176.4 kg)
Drum/end-cap material High-density polyethylene (HDPE)
Bearings Nylatron

 


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

36-in. (91-cm) Tow-Behind Lawn Roller

Order number: LPPRT36JD

40-in. (102-cm) Tow-Behind Plug Aerator40-in. (102-cm) Tow-Behind Plug Aerator
#

The 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:

  • 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
  • Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
  • 28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
  • 1-in. (2.5-cm) diameter high-carbon steel-tine shaft
  • 4.10/3.50-4 pneumatic tires for easy pulling
  • 175-lb (79-kg) capacity weight tray
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 40 in. (101.6 cm)
Aerator depth Up to 3 in. (7.6 cm)
Tines
Number of tips28
Spacing6 in. (15.2 cm) apart
Material Carbonized, 16-gauge, 0.6-in. (1.5-mm) steel
Lift adjuster Manual, three position
Wheels 4.10/3.5-4, pneumatic
Weight-tray capacity 175 lb (79.4 kg)
Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
    The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Plug Aerator

Order number: LPPA40JD

40-in. (102-cm) Tow-Behind Spiker Aerator40-in. (102-cm) Tow-Behind Spiker Aerator
#

The 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:

  • 40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
  • 10-in. (25-cm) diameter steel-tine stars
  • 132 steel-tine tips on 11 spike wheels
  • 3.5-in. (9-cm) spike-wheel spacing
  • Full-sized lift lever
  • 4.10/3.5-4 pneumatic tires for easy pulling
  • 100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 40 in. (101.6 cm)
Aerator depth Up to 2 in. (5.1 cm)
Tines
Number of tips132
Diameter10 in. (25.4 cm)
Spacing3.5 in. (8.9 cm) apart
MaterialSteel
Lift adjuster Manual
Wheels 4.10/3.5-4, pneumatic
Weight tray capacity 100 lb (45 kg)


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Spiker Aerator

Order number: LPSAT40JD

Weather Enclosures

Weather enclosure for X300 and X500 M-T TractorsWeather enclosure for X300 and X500 M-T Tractors
#

The roomy steel-frame cab shields the operator against snow, rain, sun, and wind.
Key features include:

  • Easy entry with hinged-door access
  • Double-zippered access hole for control maneuverability
  • Super-clear vinyl windows that are cold-crack tested to -4°F (-20°C)
  • Zippered windows that allow for additional airflow
  • Assembles and installs with standard hand tools in one hour
  • Overall height from ground to top of cab of 78 in. (198 cm)
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

Weather enclosure

  • Discontinued - LP36740 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, and X360 Tractors
  • LP55438 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, X350, X360, X354, X370, X380, X384, X390, and X394 Tractors
  • Discontinued - LP36741 Weather Enclosure - Select Series X500, X520, X530, X534, X540, and X590 (model year 2015) Multi-Terrain Tractors
  • LP55439 Weather Enclosure - Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Weights

30-lb (13.6-kg) front wheel weight30-lb (13.6-kg) front wheel weight

One 30-lb (13.6-kg) cast-iron weight may be installed on each front wheel for additional stability when operating on hillsides or with heavy rear equipment.

Requirements:

  • Mounting may require drilling two holes in the wheel rim.
  • BM17978 mounting hardware kit is required for each weight.

NOTE: Front wheel weights are not available for special-edition tractors because the styled front  wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.

42-lb (19-kg) Quik-Tatch weight42-lb (19-kg) Quik-Tatch weight
42-lb (19-kg) weights and optional mounting bracket42-lb (19-kg) weights and optional mounting bracket

The 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.

This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).

Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.

X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:

  • One  M147986 weight retaining rod (Parts)
  • Two  M40461 spring clip (Parts)
Standard front bumperStandard front bumper
Optional front weight bracket/bumper installedOptional front weight bracket/bumper installed

The optional front weight bracket/bumper is available to replace the standard front bumper on the following tractors:

  • Select Series™ X300, X300R, X304, X305R, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
  • Model year 2007 and later (SN 020001-) Select Series model X500 Tractor
  • All X530 Select Series Tractors
  • Model year 2011 and later (SN 060001-) Select Series model X534 Tractor
  • X570 Select Series Tractor
Front weight bracket/bumper with four weightsFront weight bracket/bumper with four weights

NOTE: Weights are ordered separately.

Holds up to four 42-lb (19.1-kg) Quik-Tatch weights:

  • Provides an alternative to front-wheel weights for ballasting rear-mounted equipment
  • Makes the 42-in. (106.7-cm) Hydraulic Tiller compatible with the X530 Tractor
  • Functions as a bumper when weights are not installed

 

Can be used in combination with all John Deere equipment, except the following:

  • Styled front bumper (BM23056)
  • 40-in. (101.6-cm) Tractor Shovel
30-lb (13.6-kg) front wheel-weight shown30-lb (13.6-kg) front wheel-weight shown

Hardware is required for installing each front-wheel weight.

Requirements:

  • Mounting may require drilling two holes in the wheel rim.
  • BM17978 mounting hardware kit is required for each weight.

NOTE: Front-wheel weights are not available for special edition tractors because the styled front-wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.

Reviews

4.18

79 reviews

Rating Snapshot

48
11
10
10
4
4.03
4.24
4.52

Good cut, bad ride.

2/5

I was so excited to get this mower after upgrading from a 2012 Troybuilt pony. The sales guy convinced me to splurge a little and I thought the bigger tires would make this a smooth ride. To be honest, it is so uncomfortable my wife refuses to ride it and it jars your whole body. The dealer said it is the lawn, but I tried my neighbors craftsman, my Troybuilt, and another neighbors kubota, all 10+ years old. Every one of them rode smoother than the JD, and it wasn’t even close.

Pros

Cons

Nate84

From: Lebanon Ohio

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

2
2
5

Broken

3/5

I had used the tractor for 3 hours. Yes 3 hours and the voltage regulator went bad Hopefully moving forward there aren’t any issues

Pros

Cons

Tmade558

From: Waterloo,ny

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

3
2
5

Makes mowing fun again!

4/5

My trusty, 26-year-old JD LX188 was becoming a bit of a chore to maintain and I needed something bigger for my 3.5 acre property. My property is very steep in spots and I also plow my 500-foot long driveway with my lawn tractor. I chose the X380 because it's the first model in John Deere's lineup with the K58 transmission which should be better suited for my use. In reading the reviews, a few common complaints emerge. One is seat comfort, but I find that it's very comfortable to sit for the 90-minutes or so it takes to mow my property. Another is cut quality, but I find that the cut is beautiful and even. Last is that the steering feels "loose". This one I kind of get. There is a lot of play in the steering (steering wheel moves quite a bit before the wheels do). The steering linkage rattles like a box of rocks when it's idling. If I put my hand on the steering wheel it stops. The extra 6 HP over my LX188 is very apparent and it handles steep hills while mowing with ease. Deck removal is a bit more complicated than my older machine which did not require tools to remove the deck. I bought the 44" plow, weights and chains but I won't be using those for another 5 or 6. Overall it's a great, solid machine that I hope lasts at least as long as my LX188.

Pros

Cons

turbojimmy

From: New Jersey

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

One year and VERY HAPPY!!! X380/54"

5/5

I have an S2554 (that was made by John Deere back in the day) that is 22 years old and still going. Bought the X380 54" to replace it. The X380 is pretty much the same design but with tons of modifications, features and like my older mower, built like a tank. Actual technical manual for adjustments, repairs, etc. is given with X380 which is usually unheard of now days with any type of outdoor/farm equipment. I hate to see the negative reviews on this mower that is given by people who do not have a clue about performing simple maintenance and repairs that is required and whining about adjustments, deck removal issues, belt removal, wrenches needed that may have scraped their pinky finger, etc. The price is up there some, but a lawn mower like this is a long-time investment and it is true "you get what you pay for". Based on the price that was paid 22 years ago for my old mower, the price for a new one hasn't gone up too terribly bad. Finally, to the cutting performance, I have a variety of bahia, centipede and kentucky bluegrass on my acreage and the X380 cuts all of them with beautiful results. Very happy!!!

Pros

Cons

Pj1100

From: GA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

X380 series

5/5

I Bought this tractor a little over a year and a half ago, and its been nothing but excellent to me, easy maintenance, good performance, and durable parts/attachments. Its a winner if you need something to mow the lawn, and do some mid duty tasks on the side.

Pros

Cons

Jake427

From: MI

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Not bad

3/5

I bought X380 a year ago. Not a bad mower but a little disappointed. My D130 still runs like a champ! 9 years and 200+ hours later it still cuts and runs smooth. What I dislike about the X380 most is the steering system. Its the same as the D130 yet feels more sloppy. Not able to make tight corners like the shorter wheel base D130. I do enjoy the ride, better seat, nice controls and 6 more inches of cutting width. Over all its a nice mower but I don't feel its worth the price tag of 5k when the D130 was 2k. But I suppose now a days if you want the hype and feel you need to spend more. Decent more It'll do the job Still give it a thumbs up.

Pros

Cons

HuntNfishman

From: Eatonville, WA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

3
2
5

Excessive fuel consumption

2/5

I bought this to replace an older hog deer x320. This is no where near as good a mower as my x320 was. It uses twice as much fuel, I can only mow half what I used to before I have to refuel.

Pros

Cons

16Bill16

From: Oologah, ok

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

1
2
5

Uncomfortable Driver’s Seat

3/5

I bought this two months ago. The driver’s seat is very uncomfortable. I’ve tried adjusting everything and it’s just not for me. The reverse safety button is bad engineering. My LT190 was better at reversing. Other features are okay but the much kit should already come standard.

Pros

Cons

Harley Man

From: North Carolina

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Great mower

5/5

I’ve had this mower two years. All these people complaining about the cut must not know how to mow. I’ve owned John Deere mowers since 1963 when they came out with the 110. This 380 is one of the easiest machine to maintain I’ve ever had. I check the deck level at least 3 times a year during mowing season. I have yet to have to make a adjustment to the deck and the cut is excellent and my 4 acre yard use to be a pasture not level at all

Pros

Cons

Caveman

From: Lewisburg TN

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Overall Happy with my purchase

3/5

The day the lawnmower was delivered, I parked it in my shed. The very next morning I had a large puddle of transmission fluid under it. The transmission seal was faulty from the factory. Dealer came & picked it up to replace brand new seal.

Pros

Cons

KPug

From: Waldorf, Md

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Bigger then my old GT235

5/5

I had to replace my 17 year old GT 235 last fall and chose this model. So far I'm very happy with it.

Pros

Cons

Chicago nm

From: Chicago

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Don't like the way the hydrolic works for stopping

3/5

This is my 4th model like this one. When you pull up to something you better start letting up on the pedal when you approach otherwise it's going to keep rolling.

Pros

Cons

Ribs stone

From: IL

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

Smooth Ride that mows well

5/5

I bought this mower 4 years ago and have 92 hours on mower. This mower has been excellent thus far. Keep it serviced and lubricated and garaged kept. There has been complaints about mower’s seat. I mow less than a hour weekly so not an issue for me. However, the seat did get a crack in it that I replaced while under warranty. Better quality seating Is not to much to ask for John Deere to improve on. Overall, a very good product in my opinion. Previously had a L 130. Not impressed with the lower end John Deere mowers.

Pros

Cons

They call me Tater Salad

From: North Carolina

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Great machine with a TERRIBLE cutting deck

2/5

I bought this X380 about two years ago. It only has 75 hours on it currently. It runs excellent and has plenty of power. Those are the only good things I can say about it. The cutting height and deck leveling system are TERRIBLE. The deck on my machine continuously goes out of level. Earlier this year I had to take it in for service because the deck wouldn't level. That was about 15 hours ago on the machine. Today, while I was mowing the front "bar" that holds the deck level simply came undone while I was mowing and bent under and into the blades. To say I am frustrated with this JD is an understatement. Now it goes back to JD for them to charge me to fix what is a terrible design.

Pros

Cons

Ktyhawk

From: VA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

2
2
5

Worst cutting mower I have ever owned

1/5

Thought I would spend some money and get a great cutting mower. Wrong. Constantly sharpening blades adjusting deck, adjusting speed. Lawn looks like I rolled it not mowed .it. Design flaw. Nothing dealer can do.

Pros

Cons

CuzN

From: Wisconsin

Length of Ownership:

Usage Frequency: Weekly

Level of Expertise: Expert

1
2
5

Very poor cut quality

3/5

Bought mid July this is the worst cutting mower I have ever had . Uncut and laid over grass throughout the whole yard

Pros

Cons

Poor buying experience

From: Kent city Michigan

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

1
2
5

It's built Deere Tough, but...

3/5

This is my second Deere, the first was 20 years ago. The addition of all the technology in this new Deere does NOT make it a better machine. I use the front blade to plow, and since the hand control lever for the deck is now "foot" operated, this makes it SOOOO much harder to float the blade in delicate situations. It also seems to use much more fuel than my older Deere. I remove the deck MANY times a season, as it's easier to use the tractor all over the property with the utility cart or log splitter in tow...my old Deere has a simple lever on the drive belt tensioner pully so that the deck is an easy off. But my new Deere, you have to use a socket wrench with a socket to do this task. It's not that I don't have SEVERAL wrenches, it's just that it's so much more of a pain. The back reflectors are no longer used...and while these may seem a small thing; when plowing at 3:00 am they make you MORE visible to an oncoming car than nothing at all. The new style cruise control is more like a car, in that you set the speed with your accelerator pedal and then depress the switch to hold it. My old cruise was so much better in that if you need to slow down or speed up a bit, you just slide the lever in one direction or the other...a simple one handed operation; whereas the new cruise is hand and foot all over again. My old Deere has a transmission where you can change the filter and add fluid; the new transmission is sealed. My old Deere was a 235 and the new is a 380, so while the new Deere is supposed to be a much better tractor...it's not as simple to operate. And I'm not sure yet about all the new added electronic technology! Time will tell, but I prefer the simple and sparse layout of the old Deere to the new over the top digital display. It's a tractor! It's a John Deere tractor, so it's a workhorse! All the bells and whistles are NOT necessary. Save the money there and put it into something more important in the tractor's design.

Pros

Cons

Printer

From: Troy, New York

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

High quality machine. Poor cut.

2/5

I purchased a new x380 last month and was very excited. It cost twice as much as my previous craftsman but seemed like a much higher quality machine. Engine runs great. Seems well made. I love the features like the comfortable seat and the large fuel fill cap. Mulches well. One problem. The cut is absolutely terrible. It’s primary purpose. It leaves lines of tall grass where I can only guess the blades meet. I have tried various blade heights, speeds and differing amounts of overlap. However nothing seems to help. It is the worst looking cut of any mower I’ve ever owned. This is incredibly sad because I wanted to live this machine. I have cut with it a few times now hoping I could get over it but I just can’t. I shouldn’t have to take out a tiny push mower before entertaining to cut my lawn because of how poorly my brand new tractor cuts. Makes me sick thinking about it looking at my lawn I just had to double cut. I’m sure this is a design flaw and nothing the dealer can do to fix. I would recommend another product. It gets two stars because is does seem like a quality product…with a terrible cut.

Pros

Cons

Davidpc

From: Rhode island

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

1
2
5

Poor cutting

3/5

Bought month ago dealer won’t help me figure out the poor cutting

Pros

Cons

Larry 2

From: Ravenna Michigan

Length of Ownership:

Usage Frequency: Weekly

Level of Expertise: Intermediate

2
2
5

Great Bang for my Buck!!

5/5

I purchased my X380 back in May. Money well spent in my book. I actually was looking for an S170 or S180. The box stores didn't have any so I went to a John Deere dealer. They had 2 X380's left. Got one and I have ben enjoying it ever since. It was a little over my budget but in the end, It's perfect for what I needed and well worth it. Looking forward to many years with it.

Pros

Cons

Dr Ace

From: Haughton, La.

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

nice machine.

5/5

very happy with the performance and comfort while operating. my lawn has never looked better.

Pros

Cons

Rick C

From: Portage Des Sioux MO

Length of Ownership: 3months

Usage Frequency:

Level of Expertise: Intermediate

5
2
5

Keeps stalling

1/5

My x380 was just picked up for the 6th time for it dying out like it runs out of gas. Sometimes I can’t even go 50 feet with it dying out. It’s starts back up, then dies out 50 feet later. The frustrating part is I can cut grass 3 weeks in a row with no problems, then this happens. I’ve replaced the fuel, fuel filter, and fuel pump with no results. My x380 only has 50 hours on it. I’m ready to get rid of it and buy something other than a John Deere.

Pros

Cons

Todd207

From: Laporte Indiana

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

3
2
5

Worth it.

5/5

I purchased this tractor about 2 years ago. It's been a great tractor. Some folks stated that it cuts uneven, all that needs to be done is a deck adjustment with the tools provided under seat. My mower didn't need much adjusting, but i adjusted to perfect it. I've ran this tractor to its limits and back a few times and didn't even phase it. The only thing i don't like is when you get a on uneven hill side one wheel spins. Not a real big issue. I use my mower weekly to cut acres. The maintence kit is great too. Easy to access oil, spark plugs and air filter. This tractor is better than the ones from brand stores. Highly recommend. Cuts fast and clean. Cant wait to get a larger fancier one later.

Pros

Cons

Mikes Mowing

From: RGV, Texas

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Good ride, deck get's unbalanced too often

2/5

The tractor itself feels very good and powerful, but when you add the power blower, it seems like the weight gets the whole thing out of balance very quickly and streaky cut. Although there's a wrench to adjust the deck from the seat, it's very difficult to reach the right spot where the key has to go. And the tool to measure the deck can't be used when the blower is on.

Pros

Cons

PDXbuyer

From: Gresham, OR

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

3
2
5

Go green!

5/5

Very happy with my mower cuts really nice,only one negative is I wish it had a bigger fuel tank.

Pros

Cons

Mike 428

From: Skippack Pa

Length of Ownership:

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

blade level adjustment great

5/5

I bought this mower in march and i am glad i did i did because of all the rain

Pros

Cons

victor978

From: alabama

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

My review

3/5

Bought it a few months ago, not as useful as I hoped it would be on inclines, not as fuel efficient as I expected. Surpasses all other expectations.

Pros

Cons

Murphy

From: Mississippi

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

Great Mower

5/5

Bought this lawn tractor in the spring of 2019. Just put 100 hours on it.. This replaced my Cub Cadet GT 2544.. The Cub was getting old and needed replaced.. I’m very happy with the X380. It cuts grass exceptionally well and runs great.. Before purchasing this model I considered a 500 series tractor. Glad I chose this one. It has and does all I need it to do.. No regrets.. My only disappointment would be the deck and it’s removal.. also the plastic hood.. but I knew about both of these before the purchase.. Overall a great tractor!

Pros

Cons

Perrycounty

From: Marysville Pa.

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

X380 2021 23 HP 5+ Stars!

5/5

X380 2021 23 HP 5+ Stars! Handles very well and cuts like a champ, I had the mulching system installed and love it.

Pros

Cons

JBN40301

From: Pinehurst, N.C. 28374

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Hate this mower

1/5

I bought this brand new mower last July. Have had nothing but trouble with it. Drive belts, blades cut uneven. have replaced belts because they shred. replaced blades because they scalp, cut uneven etc... so much work to put the belts on. It's a 54 inch. Battery ran dead after it wouldn't start. the list goes on and on.

Pros

Cons

regretful

From: Minnesota

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

1
2
5

Mower deck needs an engineering review

4/5

I have owned John Deere lawn tractors for the greater part of 30 years. I bought this mower 2 weeks ago. Have 2.1 hours on it. The front deck wheels are about gone. Have to haul it back to dealer. Product engineering needs to review this design.

Pros

Cons

buddyb

From:

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Installing deck and drive belt

2/5

Worst lawnmower I’ve ever owned in regards to removing and reinstalling the deck and drive belt....spent an hour and a half removing deck to sharpen the blades and after another 3+ hours, I still have Not got the drive belt back on. Ridiculous engineering .

Pros

Cons

D schulz

From: Wisconsin

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

2
2
5

Some engineering fumbles

4/5

I bought a John Deere X380 with 54" mower deck about 10 months ago. It works and drives great. Compared to my old GT245 it is much more difficult to work on the deck. The grease fittings are recessed so far that you can barely get the grease gun attached and it is even more difficult to disconnect it. The main drive belt requires a 3/8" ratchet to remove

Pros

Cons

YOK9965

From: Alabama

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Motor

4/5

Motor has lots of power but I feel like it should have a liquid cooled engine instead due to noise

Pros

  • ok seat
  • ok amount of power

Cons

  • lots of noise

DangerDEERE

From: wisconsin

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

upgreaded from x 300 to x380 great mowing handling machine

5/5

only thing not sitting right is the seat not as comfortable for long time mowing

Pros

Cons

coleman

From: iowa

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

best value if you just cut grass

5/5

After years of mowing over two acres of varied terrain with an lx279 that literally was dissolving around me I decided to upgrade. I wanted the X380 for the better transmission. Got the 54 inch deck. I can't believe I waited so long. It's three times the machine the Lx279 ever was. The bigger tires make a huge difference. It's super powerful and no hill can stop it. Cuts freaking unbelievably well. The decks are fantastic. Needed a mower for my other acre property and cheaped out with an s240. Mowed once with it and exchanged for another X380 but with 48 inch deck. If you tow you'll need a X570 or above but if you mainly cut and blow leaves this thing is a freaking beast!!!!

Pros

  • power
  • perfect cut
  • great ride
  • turns on a dime
  • easy to maintain

Cons

  • lack of locking differential

Lumpypockets

From: God's country

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

I do love my X380

5/5

Bought my X380 three years ago to cut my 3 acre yard. I was concerned at first that it might not be up to the task of such a large piece of ground. Especially given that it is not very smooth ground. But the X380 has been a really good machine so far. It has met and exceeded all of my expectations. I thought it was a bit expensive, but I would not hesitate to recommend it to family or friends. I expect that it will service my needs for years more to come.

Pros

  • easy to use

Cons

jerry67

From: commerce, texas

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Fully Meets Expectations

5/5

This week I traded my LX277 bought exactly 20 years ago this month on a new x380. The LX277 provided excellent service for more than 1200 hours. It was still operating well but it was time. Started out looking at the X350 and some competitors, and a good sales person suggested the more robust transmission in the x380 would provide greater value for my application. Mowed my 2+/- acres with the x380 for the first time today. Lots of trees, flower beds, bumps and few steep spots. It's an outstanding machine. Cut my mowing time by 20% and I haven't even learned the machine yet. The quality of cut is excellent. Overall quality of product meets expectations.

Pros

  • excellent mowing speed and cut. great power.

Cons

  • the jury is still out on seat comfort.
  • the 22hp engine is a bit harder starting warm.

Don1957

From: Lancaster County, PA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

The x380 is a great mower

5/5

Upgraded from 17 year old LT170 to X380 and pleased with high quality build components from the frame, to the deck, wheels, engine all reinforcing the John Deere brand. Excellent sales service from team at Little’s.

Pros

  • 22hp more power and speed
  • 1 touch auto mulch easy and great results
  • added the 10p cart yard clean mulch logs

Cons

  • seat comfort could be better

Steveh

From: Valley forge pa

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Good mower for the price

4/5

My 5th John Deere mower. Quality is good, JD mowers have always been durable for my farm mowing. 300 series have always needed a better seat. I usually replace factory seat with the deeper high back seat. LCD instrument cluster fogs over after about 30 min. of mowing, dealer says this is a fairly common problem.

Pros

Cons

sb62

From: MN

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

X380. 54”

4/5

This is my review at the end of the first summer of use on my X380, 54”. Also purchased the steel dump cart with it. I think the mowers quality is very good. Cuts very nice. Professional. Plenty of power. I surviced it after first 10 hrs. of use. This machine can pull a heavy load with no moaning and groaning too. Information panel / dash, very nice, and warns of low fuel. Only minor issue I have is a vibration noise, coming from steering column while hands free at an idle. Putting hand on steering wheel, it stops, but, still bugs me. Plenty of warranty time. Nice machine.

Pros

  • solid machine

Cons

  • rattle in steering column

Steve56

From: Hillsboro, Mo.

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

love the way it rides

5/5

I bought this about a month ago and love mowing the lawn with it. I upgraded fro a JD 105 42 in deck to a X380 54 in deck. It took me 2.5 hours to mow it now takes me just over a hour. It really cut down how many times I have to mow a area. It does go through a bit more gas but i'm ok with that the ride makes up for it. Thank you Hudson tractor for all your help.

Pros

  • moves fast

Cons

Phil3070

From: Ducthess county new york

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Great mower!

5/5

I Have had this tractor for 2 years now and it has done a fantastic job so far with no problems. The only drawback is that the seat is starting to crack already and it is kept completely out of the weather when its not in use

Pros

Cons

  • cracking seat

Steve1980

From: blountville tn

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Great mower

5/5

Got my X380 from Cazenovia Equip in Lowville NY. Great staff that listens to their customers' needs and answers all questions. We mow and roll approx. 2 acres. A few years ago before we built our house, our yard was a pasture / meadow, so far from being a manicured lawn. Box store mowers got beat up in no time. Cast iron axle is durable. HP and beefier build helps with terrain and hills. This is my third mower in the few years we've lived in our house and you know what "right" feels like when you finally get it right.

Pros

Cons

johnsont2

From: Croghan, NY

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Very Impressive!

5/5

Purchased the X380 this spring and I wanted to use it for awhile before posting a review. It is a beast! Quiet and effortless power. Easy turning with a short turning radius. (no need to upgrade to power steering) Do yourself a favor and order the electronic mulch control upgrade. Best money I ever spent. It doesn't leave a blade of grass on the lawn. My yard now looks like a golf course! I used to spend hours with my old mower going back over grass clippings again and again. No more! This machine saves me a lot of valuable time. Great warranty as well. So far, I have been very impressed with my X380!

Pros

Cons

Ike1960

From: Pemberville, Ohio

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Poorest Cut

1/5

I’ve owned a John Deere x320 for 7 years. I decided to move up to a x380. I was sadly disappointed by the uneven cut of this mower even after adjusting the blades with a micrometer. I hope I can get the dealer to fix it. One promblem is I’m 230 miles from the nearest dealer.

Pros

Cons

Johnr

From: Tok alaska

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Expert

1
2
5

Love it!

5/5

I bought my X380 in the fall of 2016 to replace a 22 year old LX172 whose (single cylinder Kawasaki) motor finally gave out. Decided on the X380 for the extra power and better tranny over lesser models. I didn't realize how much better it would be than my old LX172. For starters, more power (22 vs. 14). Second, I like the hydrostatic trans much better than I thought I would (I thought I liked shifting). Third, it cuts better, more cleanly and more smoothly. I can run through most of my 3 acre yard at full speed without compromising the quality of the cut (I do slow down over roots and a couple of low spots). Then, things like a fuel gauge and battery monitor are really handy. I have a bit more than 60 hours on it so far. Some complain about the seat; it seems very comfortable to me. I have had absolutely no problems or issues with it so far. I'm thinking it will probably last longer than I will.

Pros

Cons

Herman452

From: Tallahassee, Florida

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

X380

5/5

I had a another lawn tractor forever and thought it was a good mower that is until I bought an X380 and wondered why I waited so long. The X380 is a much safer mower. Awesome engine, great smooth sound and plenty of power. Only problem is I end up cutting the grass to0 often because it is a great mower - wouldn't hesitate to tell someone to buy one. Paired with a John Deere 10p cart it makes yard work a breeze. Definite get the mulch kit and the JD steering wheel knob

Pros

  • smooth engine
  • plenty of power

Cons

trbr81

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Upgraded from LX280 to X380

5/5

I purchased a John Deere X380 to replace a 14-year-old John Deere LX280 with almost 500 hours. The LX280 is still running fine, but I wanted some of the new features and mowing improvements. Here are some of the things I found better with the X380: • Tighter turns so smaller cutting circle and quicker U-turns. • Faster acceleration. Gets up to speed quickly and zips right up hills. • More power. Larger Kawasaki engine cuts through tall grass with ease. • Cleaner cut. Much smoother cut and I can mow the grass at taller mower deck settings. The LX280 left an uneven cut whenever the mower deck was set over 2.5 inches. The X380 cuts the lawn smooth all the way up to the maximum height of 4.0 inches. It’s supposedly better to mow your grass tall in the summertime and it looks better when it is 3.5 to 4.0 inches after being cut. • Improved dashboard – the X380 includes a gas gauge and target cutting RPMs. The LX280 had no dashboard, only an hour meter. I really have enjoyed the LX280 mower. However, I like the X380 much better. It’s a fantastic mower and should last an extremely long time with reasonable care. Highly recommended!

Pros

Cons

RandallS

From: Chantilly, VA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

We are very happy with this this machine .

5/5

I had a Husqvarna V-Twin 15yrs Transmission stops when hot.Went looking for a new machine.Did not think I could afford a JD . Bought the X380 48-in can’t stop using it . Bought the leaf and grass blower attachments also bought snow blower. They do a great job. Wish the attachments were easier swap.

Pros

  • i would buy again

Cons

Jeddie

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

So far so good

5/5

Bought this tractor last July when the frame broke, for the second time, on a 2 year old 54" Husqvarna, not to mention the belt popping off every mow. We also lost the tranny on a 54" Cub Cadet after 3 1/2 years. We mow 2 acres of gently sloped and slightly rough ground. Unless your ground is smooth and flat I wouldn't recommend buying those tractors at Home Depot or Lowe's. The X380 though seems to be pretty tough. We haven't had an issue yet. The mulching feature is fantastic. and the bagging system with the pony motor cuts and bags anything, wet or dry.

Pros

Cons

kingjames

From: Huntsburg, Ohio

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

What a Dream.

5/5

Excellent tractor. Handles any job I throw at it. Cuts grass with ease even the tall, thick and wet stuff. Looking forward to using it in the winter. Would definitely recommend.

Pros

Cons

HappyKraut

From: Maple Park, IL

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Quality Lawn/Garden Tractor (no problems so far)

4/5

My 2017 X380 just rolled over 128 hours. I've had it over one year. I bought this tractor to replace 2 riders, a 2008 Troy-Bilt Mustang Colt 42" cut zero-turn & a Craftsman LT2000 42" cut. I mow grass with it (I love to mow), haul a trailer with brush sometimes (has plenty of power to move trailers of dirt, rock, mulch etc.). It has the 22HP Kawasaki engine and stronger (K58) transmission compared to lower price models and the price goes up significantly for small increases in power, features, transmission, etc. Basic maintenance is simple. Plenty of power. I've never had a mower that leaves such a smooth and even finish on the lawn. You can buy a 48" cut lawn tractor at big box stores for much less (such as a JD D160 OR E170), but in my experience the cheap ones don't stand up to hard use (transmission failures). The JD does. It does the job and looks like it will be a long-term (10-20 years) winner. That's my plan (or game plan), anyway. But, after all it's a real John Deere.

Pros

  • handy instrumental panel
  • durable
  • solidly built
  • tire size over craftsman lt2000
  • strong motor and garden tractor k58 tranny

Cons

  • nonservicable (sealed) hydrostatic drive
  • crappy seat but it works and is comfortable
  • no locking differential
  • uses a lot of fuel (compared to my old troy-bilt)

Frogboy

From: Richmond, KY, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

The best mower

5/5

Bought this mower in Oct 2017 to replace a 22 yr old LX172. If that mower was that good, I know this one will be better. It has lots of power and is heavy built. After all it's a John Deere.

Pros

  • lots of power

Cons

  • none

boomer

From: Union City, TN 38261, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Quality Machine

5/5

My x380 just rolled over 50 hours. I've it had one year. I mow a little, mulch tons of leaves with the optional under-deck kit, haul a trailer with firewood, and tow my 600 pound log splitter to various wood piles. Basic maintenance is simple. Plenty of power. I've never had a mower that leaves such a smooth and even finish on the lawn. You can buy a 48" cut lawn tractor at big box stores for much less, but in my experience the cheap ones don't stand up to hard use. The JD does. Instead of turf tires I ordered tires with farm tractor style tread. Traction is much better. I also use the three 60 pound satchel weights on the back hitch sometimes. It makes a big difference in what you can pull without spinning out. I winced at the price when I bought it, but it does the job and looks like it will be a long-term (15-20 years) winner. That's my plan, anyway.

Pros

  • handy instrumental panel
  • electronic pto
  • relatively quiet

Cons

  • backup button is awkward
  • gas tank could be larger

Bob847

From: Jefferson County, MO, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Sweet Spot

4/5

This tractor hit the sweet spot for me in regard to value, features, and price. It has the Kawasaki engine and stronger transmission compared to lower price models and the price goes up significantly for small increases in power, features, transmission, etc. I’ve been very satisfied with the unit for mowing and pulling a trailer, dethatcher, and aerator. Even pulled people on a sled with it! The quality of this unit compared to even the high end big box tractors is appreciable. Just the deck alone is substantially higher quality. I do wish removing the deck wasn’t so complicated and difficult. The John Deere accessories I’ve purchased (for example, bucket holder and brush guard) are difficult to install and do not fit well (holes do not align properly, bolts have loosened quickly, instructions are poor, etc.). Charging plugs fall out of the John Deere charging kit outlet so it has proven useless which is a shame due to the high price of John Deere accessories. So, I would recommend sticking with aftermarket accessories and implements. Since I purchased with the intent of fully accessorizing, this was a pretty big disappointment. Maintenance of this tractor is a breeze. The 22 HP engine is plenty powerful to pull up hills and move the mower at a quick pace. Cruise control is a great feature.

Pros

  • durable
  • easy to maintain
  • solidly built

Cons

  • accessories are poor quality/design
  • expensive for the power and features

Bobo13

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Really awesome mowing tractor. But removing the deck is very difficult

3/5

Have had my New X380 54 inch deck for almost a month and a half. It mows great. I mow over 6 hours a week, and most of it is hilly farm land, not a nice smooth lawn. I would rate this the best mower on the market. However, I hit a limb that was hidden in the high grass, and it ripped one of the plastic shields over a spindle. To install the new cover, I had to remove the deck, but having had a John Deere for over 21 years, I knew it would be easy to do. Wrong!!! The simple long lever that would release the tension on the drive belt is not there. Instead you need to have a 3/8 inch ratchet. I have had 3, 3/8 inc ratchets. I broke one years ago, and two of my sons broke the other two. No problem it is only a 30 minute drive each way to a Lowe's to get one. After trying to push the ratchet forward laying on my side, I could not push hard enough. I slipped a 2 foot pipe on the ratchet and was able to push it to relieve the tension. However, laying on my side, I could not do that and slip the belt off the drive wheel. I had to wait until the next day until my son could come over and help me. The next day, we removed the drive belt. Woo HOO! Our joy was short lived though. Next to come off were the "J" pins that hold the deck to the arms that raise and lower it. I have seen John Deere Videos where a little girl removes these "J" pins by reaching down with her fingers. We followed the instructions in the manual to the letter. We could not get these stubborn pins out. I finally used the biggest screw driver I own and could not pry that "J" pin out. I scratched up my deck pretty good though. . So back to yanking and pulling for several hours. Finally one came out. And I saw the problem. Some Engineer designed the "J" pin with a raised ring around the short end. That ring made it almost impossible to get out. And back in. I also saw when I had the deck off that the long belt that drives the blades was badly frayed, and will need replacing soon.

Pros

Cons

Singlesix22

From: Lucas, OH 44843, USA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

great mower

5/5

bought a new x380 in feb. replaced a 5yr old x300 that was still like new but wanted a little bigger. big dif. cut 20-25 minutes off mowing 2acre yard. lots of powere and mows great. only down side is deck remove and replace. but maybe ill get better at it after a couple times.

Pros

  • mowinggreat ride

Cons

  • deck removale

jimw

From: sterling,il

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Like cruise control &show quite it is.

5/5

I have a lx279 16yrs.old.still use it.bought x380. I love everything but the seat.wish I had a deluxe seat like offered on the oturns!!!!i love the mulching kit.

Pros

Cons

BRMF

From: Alabama, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

great mower overall.

5/5

This mower is great. Bought it in feb. 2017 mower cuts well , lots of powe. High quality. Seat pushes into my kidney area & i cant adjust it out. But other than the seat being axlittle uncomfortable the mower is really awesome. I would definitely recommend this mower . You want be disappointed. Thanks.

Pros

  • everything great except seat issues m drives easy

Cons

  • seat could be a little more comfortable

ridethelawn61

From: Newport, AR 72112, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

A little expensive, but worth it for the long run

5/5

I bought this tractor because of the green fever event in February. Along with the $500 off, I was able to get the dealer to knock another $400 off of the list price for a final price of $3500. I replaced a D140 I bought new 6 years ago. Nothing wrong with the D140, but I had always wanted an X series and the timing was right. I decided on the x380 to get the upgraded wheels along with the larger engine (Kawasaki) and transmission. To me it is the best bargain for what you get. I do not miss 4-wheel or power steering or hydraulic lift, especially not for $1000 more. It steers easy and relatively tight. It has tons of power and the engine speed hardly drops even in tall grass. It cuts great and level. The adjustable wheels deck is the way to go. It is much more stable and powerful than my D140 and seems to use about half the gas per mow. The deck leveling system is easy to use if you look under to guide the wrench to the bolts. I love the instrument panel and the gauges are great and accurate. I have no negatives to say except that it should have come with the bumper instead of me having to purchase separately. I also installed a john deere steering spinner wheel and it is great. I loved my D140 and love my x380 even more! I would recommend it to anyone. You will be glad you purchased!

Pros

Cons

JDLover

From: Royston, GA 30662, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Typical John Deere Quality

5/5

I recently purchased a X380 to replace my John Deere 316 that I have had for twenty five years. When I decided on a new tractor it never crossed my mind to buy anything other than a John Deere, based on my satisfaction with their products in the last two tractors I have owned. The X380 has all the power I need and my lawn looks great. The engine is quiet and easy on gas. The deck leveling and mower system makes is easy to do, even though I do miss the hydraulic lift. The instrumentation is easy to read and user friendly, while the tractor handles easily and is very comfortable for me at 6-4. You may pay a little more up front for a John Deere, but if you take care of them they will last a lifetime.

Pros

Cons

RMH1103

From: Charlotte, MI

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Thsi is a great tractor

5/5

I bought this tractor to replace a 9 year old Husqvarna 2348LS. I had replaced the transmission and PTO last year on the Husqvarna. I am have engine problem this year so I started looking. I started to buy a D160 but bought the X380 with 48" deck. It is a beast of a tractor, very quiet while running, great traction on inclines. This is the best tractor I have ever owned, I have had 3 other brands before the John Deere. John Deere is pricey but as of now I think it is worth the cost. GREAT TRACTOR!

Pros

  • great tractor

Cons

Longb5124

From: Cross Lanes, WV, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Mowes really good

5/5

I'm going to like it better with time. Yard really looks good after mowing. Harder to operate than smaller mowers. The only thing I don't like is the back up mode, you have to push a button with your left hand while steering with your right hand to keep the blades engaged with no power steering its harder. It's built a lot stronger than my last mower so this one should last all of my mowing years. A trailer hitch ball fits on the back so I can pull my trailer out of the back yard when I need to take the mower to another location. That's great.

Pros

Cons

PaleRider

From: Mt Sterling, KY 40353, USA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Best lawn tractor ever

5/5

Mows like a dream...very solid. Over sized turf tires doesn't track up the yard like my old mower did. C Very small turning radius for larger mower. Very happy with my purchase!!!

Pros

Cons

Jbird

From: Missouri, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Recommend this mower

5/5

I bought this mower in January 2016 and it sat in the barn until mowing season. My dad retro-fitted an old John Deere snow blade for the front of this mower but it could not handle the 31 inches of snow we got in one day. I tried to get it out of the barn with about 6 inches on the ground and it did not matter that I had chains on the tires, the snow was just too deep. When it warmed up I was able to start mowing my 4 acre lot that is pretty much all hills. This mower does a fantastic job. I used to fight with an old Craftsmen 42" deck and it would shut off every few minutes. This mower just keeps on going. The 54" mower deck helps cut my mowing time down and I can actually cut all 4 acres. It used to take me two hours to do about 2 acres, maybe less. Now I do all 4 acres in a little over 2 hours. I am also able to haul firewood around the property up steep inclines with a cart on the back and this mower has no problem. Maintenance is easy. It would be nice if the mowing speed was a little faster but overall this is a product I would recommend to anyone with a decent-sized lot to mow on a budget.

Pros

  • power
  • 54" mowing deck

Cons

  • mowing speed

Blair

From: Northampton County, PA, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Outstanding Product

5/5

Purchased the 380 this spring and have never looked back. Dealer came to my home before I decided on the 380. We reviewed my needs and this tractor met them all. With close to an acre with a steep incline in the back I have no issues to speak off. Handles the cutting better than anything I've owned and strong enough to pull all of my attachments. Very pleased!

Pros

  • excellent cut
  • strong transmission
  • ease of use
  • value

Cons

RonT

From: Silver Spring, MD, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Great machine, cuts smooth, plenty of power, resonally comfortable, well made.

5/5

After researching for a couple of weeks, the X380 was my choice. It has plenty of power and really cuts thick grass on uneven terrain with no problem. I like the operator controls and digital read-out features. Everything is easy to find on the operator's panel. This machine is well made, and the hardware (washers, nuts / bolts, etc) appear to be durable. For my use, the wider rear tires make mowing wet areas a breeze since some of my yard stays somewhat soft. Clean-up is quick and easy. This machine cuts grass like there's no tomorrow. I've never owned a rider that cuts grass like this one. leveling the deck could not be easier. The owner's manual is easy to understand and all the info you need is in there. The turning radius could be a little smaller. Overall, I am very well pleased. JD did their homework on this one!

Pros

  • great machine

Cons

  • turning radius

BudsX380

From: Louisiana, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

So far best Lawn tractor I've had

5/5

decided to go with the 380 54" about 2 months ago, I was cutting my property and using my Troy Built for about 10 years, those ten years were not problem free and I spent alot of money buying parts and repairs. its been raining pretty good most of the time and I have mostly Bermuda grass, cutting with my troy was a big choir especially when we get alot of rain, this X380 cuts better, is easier to use, and easier to clean and maintain than my Troy ever way even new, can't wait to see how it performs in the winter

Pros

  • easy to clean
  • easy controls
  • love the digital display
  • lots of power and tuoque
  • comfortable seat
  • lot of power

Cons

PeteVit

From: Cleveland, AR 72030, USA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

X380 not quite there yet

4/5

only two problems with this mower : seat does not adjust far enough (i'm a 6ft 2 in tall man) and when i step off of the mower(L.H. side) my pants cuff drops right over the protruding shaft of the left rear adjustable deck wheel. being a 2016 model, there are not many accessories available at this time ie: mulching kit for 46 in. deck.

Pros

Cons

willieg

From: Delaware, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

X380 the best machine for me

5/5

We had a Sabre 22HP 54" Deck since 1998 and when it came time to replace it we knew another John Deere was the one to have. We initially went with the X350 and found the tire size just too small to tackle the terrain on our sandy hilly four acres. Thanks to John Deere's 30 day satisfaction I am please to say that the X380 gave me just that bit more that we needed to make things very smooth. I don't think I will ever use all of that 22HP, but the tire size increase was the trick for better terrain management and ride quality. Big thanks to John Klas of Green Mark of Kent City, Michigan for making the transaction from start to finish so easy!

Pros

  • it's a john deere
  • tire size over x350

Cons

  • no led headlights

G19Guy

From: Cedar Springs, MI 49319, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

So Far So Good

4/5

9 hours on it so far. It arrived from the dealer ready to mow. It's so much better of a mower in general than my old LA130. But I went cheap on that one and went for a better quality mower this time. my yard has not been cut this great except for when i used my father in laws X540. I love the accel deck for eas of clean compared to the edge series decks.. So far so good.

Pros

  • accel deck cleaning
  • steering radius
  • quiet motor

Cons

stumpy318

From: Monterey, LA, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

super upgrade from X300

5/5

more power and better tranny than x300. Love the new easy clean deck. Harder to steer on tight turns, but aggressive tires may be to blame...these tires really bite and grab the turf.

Pros

  • strong motor and tranny

Cons

  • harder to steer in tight turns

JeffDeereMowerMan

From: Moberly, MO, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

I really like my X380 but have a feeling the plastic brake and deck lift levers wont last to long they will ether strip out or brake. hope Im wrong

4/5

I really like my X380 but have a feeling the plastic brake and deck lift levers wont last to long they will ether strip out or brake. hope Im wrong

Pros

Cons

jeff52

From: wi

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Great Tractor

5/5

I have had my X380 for a little over a month and I have not been disappointed. I bought this to replace a Cub Cadet 1527 and talk about an upgrade. I have more power than I can ever need and the quality of the cut is superb. With my old mower I would have to slow down or go over some areas twice when it came to deeper grass. This is no longer the case with my X380. My lawn looks like a carpet. The anti-scalp wheels being adjustable is a big plus for me. My yard has plenty of undulations and spots where my previous mower would cut very close to the ground. I don't have those worries any more. Also, the ride that this mower gives is very nice. The only complaint I have is that cup holder will not hold my 32oz Yeti! If you are considering this mower, buy it! Trust me, you will not be disappointed.

Pros

Cons

Keller

From: Amherst, VA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise:

5
2
5

Great Product

5/5

My X380 was delivered on 4/29 and I mowed my 2 acre parcel on 4/30.Mower deck is great and at 48'chewed up my lawn in no time.Plenty of power from the 22 horse engine.Ride is very comfortable and dash is well laid out.Owners manual is very outdated.

Pros

  • great ride
  • dash
  • power to burn
  • stanton equipment

Cons

  • owners manual

Ctyankee

From: Winsted,Ct

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Lawn beast

5/5

I have owned my X380 for about a month and have cut my 2+ acres twice. The mower has cut my undulating yard without a hiccup, and has cut nice and even. It climbs hills without any problem, although the rear tire spun a time or two. Overall, I am very happy with my purchase. I look forward to many years happily sitting on my John Deere!

Pros

Cons

FirstOne

From: Staunton, VA 24401, USA

Length of Ownership: 1month

Usage Frequency: Monthly

Level of Expertise: Beginner

5
2
5

Traditional John Deere quality.

5/5

I have my 380 about a month now. I have never owned a lawn tractor before so admittedly have nothing to compare it to. What I can tell you is that it feels solid, cuts the grass evenly, climbs hills with ease and is soooo easy to drive. You do not need power steering, (that is standard on the 390 for about 1k more). I also bought the 10cu. ft. cart (quality) which has made yard work much easier. I filled it over the top with grass edgings (I estimate about 500lbs) pulled it up a hill like it wasn't there. Very happy with my purchase.

Pros

  • very easy steering powerful engine quality feel

Cons

  • $$$$ but quality doesn't come cheep

GLCK

From: Manheim, PA 17545, USA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

Just purchased last week.

5/5

I did take a lap or two around and it seems very capable of handling the task at hand. Very comfortable and smooth. I hope for the price it lasts a very long time trouble free.

Pros

  • comfortable and capable

Cons

  • headlights should be water sealed.

JReynolds78

From: Boomer, NC 28606, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Beginner

4
2
5