HPX815E UTILITY VEHICLE
Work Series Utility Vehicle
- Electronic switch for instant 4WD engagement
- New dash display, including fuel gauge
- 16.4 cu ft (.46 cu m) cargo box with a 1,000 lb (450 kg) capacity
- Powerful diesel engine system
PLUS ADDITIONAL CHARGES
Apply For FinancingBuy OnlineMaintenance Plans
View Product Brochure
60 Day Promise
Features
Precision-engineered drive system optimizes acceleration, hauling, towing, and hill-climbing capabilities
The Gator™ HPX Utility Vehicle has a precision-engineered drivetrain system to better utilize engine power and to improve acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.
Key elements of the drive system include:
- Transaxle with high and low ranges, neutral, reverse, and park
- Engine
- Variable-speed drive
Variable-speed drive
The variable-speed drive consists of two clutches and a drive belt:
- Drive clutch is attached to and rotated by the engine.
- Driven clutch is attached to and drives the transaxle.
How variable-speed drive works:
- As the engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
- As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
- With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
- The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains constant at constant throttle position.
- Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear or neutral.
- To shift out of park, the service brake must be pressed to release the parking solenoid. An audible click will be heard and then the vehicle can shift out of park into the desired gear.
Transaxle and mechanical front-wheel drive (MFWD)
- Two-speed, fully enclosed, oil bath transaxle allows superior pulling ability
- Low range is 0 km/h to 19 km/h (0 mph to 12 mph)
- High range is 0 km/h to 40 km/h (0 mph to 25 mph)
- MFWD and rear transaxle are protected by skid plates
- Helical forward and reverse gears are used for quiet operation
- Selectable four-wheel drive (4WD) system with a limited slip front differential and dash-mounted electronic rocker switch
- Provides exceptional traction in challenging conditions
- More control descending hills with 4WD engaged – all four wheels help slow the vehicle down, and clutch engagement is still necessary to prevent free-coasting
- Near instantaneous torque to the front wheels once electronic switch is engaged
- Maintains turf-friendly operation in two-wheel drive (2WD mode)
- Combined with rear traction assist - (differential lock) can provide excellent traction in challenging conditions
Features operator conveniences such as bench seat, cup holders, glove box, and 12-V outlet
The Gator™ HPX is equipped with many standard features that provide for comfortable and convenient operation:
- Bench seating provides room for one operator and one passenger
- Hip restraints serve as convenient and comfortable handholds
- Occupant protective structure (OPS) with three-point seat belts and passenger side grab handles, located on the front post, front dash, and on the outside of the seats
- Operator platform provides easy entry/exit for the operator and passenger
- Cup holders are located within reach of the operator's station
- Hour meter comes standard to assist in maintaining regular service intervals
- Traction assist (differential lock) is operated by electronic switch and conveniently located on the dash
- Glove box is located in the dash to provide a convenient storage area for small items
- Standard 12-VDC outlet conveniently located on the instrument panel
- Tank-mounted fuel gauge is easily viewed from the left side of operator's seat
- Large, 76-mm (3-in.) diameter fuel tank fill opening allows easy fuel fill and helps to eliminate spillage
- Storage compartment is located under the front hood for extra storage space
- On-dash manual choke provides easy accessibility and convenient choke moderation for smooth engine warm-up (gas models only)
- Display features include:
- Speed
- Fuel gauge
- Mechanical front wheel drive (MFWD)/rear diff-lock
- Gear position
Heavy-duty suspension delivers excellent heavy hauling capabilities
The Gator™ HPX is equipped with heavy-duty, coil-over shock, semi-independent rear suspension with 89 mm (3.5 in.) of suspension travel. This provides a comfortable ride with the cargo box unloaded while also minimizing suspension sag when the cargo box is loaded.
The Gator HPX is equipped with a MacPherson strut, independent front suspension, providing a comfortable ride and excellent work capability. The heavy-duty, ductile cast-iron, single A-arm provides 131 mm (5.15 in.) of suspension travel for excellent handling and ride quality.
Factory-installed occupant protective structure (OPS) or deluxe cab frame
The Gator™ HPX is configured from the factory with OPS and standard occupant side retention (OSR) nets or deluxe cab frame.
- The OPS performance is certified to Society of Automotive Engineers (SAE) J219 standards.
- Glass doors can be dealer installed to complete the cab enclosure.
OSR
- Certified to American National Standards Institute (ANSI) B71.9 standards
Nets are standard equipment on the Gator HPX. Features of the nets include:
- One-handed operation
- Easy entry/exit
- Great visibility
Durable, versatile cargo box for hard-working performance
Extra-durable deluxe cargo box ensures hard-working performance and longevity
The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust and dents and reduces noise.
Deluxe cargo box tailgate
The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.
The standard-installed lanyards can also be removed to lower the tailgate 150 degrees for convenient loading and unloading tasks.
Deluxe cargo box tilt
The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist. A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.
Integrated tie-down points
The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:
- Four corners inside the cargo box bed
- Four points on the load guard directly behind the operator station (A)
- Tie-down bars on either side of the cargo box (B)
- Six points on the underside of the cargo box frame (circled)
Cargo box specifications
Length | 1143 mm (45 in.) |
Width | 1320 mm (52 in.) |
Depth | 304 mm (11 in.) |
Volume | 0.46 m3 (16.4 cu ft) |
Weight capacity | 454 kg (1000 lb) |
Dump angle | 47 degrees |
CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.
Converting deluxe cargo box to a flat bed
The deluxe cargo box easily converts to a flat bed. The flatbed configuration allows operators to load larger cargo.
Specifications
Compare the specifications of up to 4 models
Key Specs | hpx815e-utility-vehicle Current Model |
---|---|
Engine power | 13.57* kW 18.2 hp |
Cargo box dimensions | 1143 x 304.8 x 1320 mm 45 x 12 x 52 in. |
Cargo box capacity (weight) | 454 kg 1000 lb |
Towing capacity | 590 kg 1300 lb |
Front suspension | Independent with McPherson Strut |
Rear suspension | Coil over shock |
Final drive | Two speed, oil bath |
Four wheel drive | Yes |
Fuel capacity | 20.1 L 5.3 U.S. gal. |
Engine | |
Type | 3-cylinder, 4-cycle diesel |
Displacement | 854 cc |
Power | 13.57* kW 18.2 hp |
Cooling system | Liquid |
Drivetrain | |
Transmission | Continuously Variable Transmission (CVT) |
Final drive | Two speed, oil bath |
Four wheel drive | Yes |
Traction assist | Positive locking, mechanically actuated (hand-operated) |
Descent control | No |
Suspension | |
Front | Independent with McPherson Strut |
Rear | Coil over shock |
Brakes | |
Type | Hydraulic disc brakes |
Park brake | Rear mechanical disk, hand operated |
Tires / Wheels | |
Front | 24 x 9.5-10 |
Rear | 24 x 12.0-10 |
Dimensions / Capacities | |
Wheelbase | 1910 mm 75.2 in. |
Weight | 681 kg 1526 lb |
Length | 3022 mm 119 in. |
Width | 1486 mm 58.5 in. |
Height | 1867 mm 73.5 in. |
Tread centers | Front: 1257.3 mm 49.5 in. Rear: 1219.3 mm 48 in. |
Ground clearance | 152.4 mm 6 in. |
Fuel capacity | 20.1 L 5.3 U.S. gal. |
Cargo box dimensions | 1143 x 304.8 x 1320 mm 45 x 12 x 52 in. |
Cargo box capacity (weight) | 454 kg 1000 lb |
Payload capacity | 635 kg 1400 lb |
Towing capacity | 590 kg 1300 lb |
Hitch | Standard receiver, 5.1 cm 2 in. |
Features | |
Color | Green/yellow |
Power steering | No |
Battery / Alternator / Power port | 480 CCA 40 amp at 3200 rpm |
Instrumentation | |
Storage | Cup holders, glove box |
Seating | Bucket seats (bench available) |
Accessories and Attachments
Ag Management Solutions
The AMS integration kit allows the customer to mount the StarFire™ Receiver and GreenStar™ (GS) display (both receiver and display sold separately) to a Gator™ Utility Vehicle with deluxe cab.
Key features of the AMS integration kit:
- Compatible with StarFire iTC and 3000 Receivers
- Compatible with GreenStar 2 1800, GreenStar 2 2600, and GreenStar 3 2630 Displays
- Receiver mounts to the roof of the deluxe cab
- Switched power to receiver and display allows customer to run the AMS equipment even when the vehicle’s ignition is off. Receiver and display will not turn off when the vehicle’s ignition is turned on and off.
Common applications:
- Boundary mapping
- Flagging field obstacles
- Soil sampling
Compatibility:
- Model year 2011 to current HPX, XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
- Compatible with deluxe cab
- Not compatible with poly cab
The AMS integration kit allows the customer to mount their StarFire receiver and GreenStar display (both receiver and display sold separately) to their Gator Utility Vehicle.
Key features of the AMS integration kit:
- Compatible with StarFire iTC and 3000 receivers
- Compatible with GreenStar 2 1800, GreenStar 2 2600 and GreenStar 3 2630 displays
- GS display mounts to the occupant protective structure (OPS) for convenient access
- Ability to mount receiver to the poly roof, or on the OPS alone
- Switched power to receiver and display allows customer to run the AMS equipment even when the vehicle’s ignition is off. Receiver and display will not turn off when the vehicle’s ignition is turned on and off.
Common applications:
- Boundary mapping
- Flagging field obstacles
- Soil sampling
Compatibility:
- Model year 2011 to current HPX, XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
- If installed on the poly roof, compatible with poly roofs on Model Year 2013 to current Utility Vehicles
- Compatible with full windshield, poly cab
- Not compatible with deluxe cab
Backup Alarm
The backup alarm kit alerts pedestrians when the Gator™ utility vehicle is operating in reverse. It includes an alarm, mounting bracket, wire harness, and switch.
Blade
Rubber squeegee
-
Absorbs impacts and conforms to the surface being plowed
-
Is a great choice for use on sidewalks and other sensitive surfaces such as brick and cobblestone
-
Provides quiet operation ideal for residential and commercial applications
Ordering information
Contact your local John Deere dealer for availability and pricing information.
POWERtach rubber squeegee
Order number: LPPK150
POWERtach is a U.S.-registered trademark of POWERtach company.
Cab
The operator protection system (OPS) poly rear window is an excellent solution for operators seeking to reduce dust and air flow throughout the operator station when coupled with a half or full windshield (vent open for best results). Made out of high-impact-strength abrasion-resistant polycarbonate material, this rear window is highly durable and scratch resistant. It also attaches to and detaches from the OPS with ease, thanks to the quick-clamp mounting system.
Compatible with Gator™ XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and HPX Utility Vehicles.
Deluxe Cab Frame - 57H6MBUC10217
Required with deluxe poly door kit
Kit includes:
- Left- and right-hand fender closeouts
- Left- and right-hand close offs around fuel tank and air cleaner
The poly cab doors for the deluxe cab are ideal for outdoor enthusiasts and others desiring four-season weather protection. This door kit includes both driver- and passenger-side doors. The poly cab is sold as individual components: deluxe cab glass windshield, occupant protective structure (OPS) poly roof, rear panel, and the door kit. This gives operators flexibility to configure the vehicle to meet their unique needs.
Key features of the poly cab doors:
- Doors are thermoformed from thick, acrylonitrile butadiene styrene (ABS) plastic for impact resistance, durability, and style
- Reinforced with steel tubing for rigidity
- Mounted on heavy-duty hinges for durability
- Heavy-duty, automotive-style latches and strikers hold the doors tight and provide an excellent seal
- Locking door handle
- Large, glass roll-down windows provide excellent side-to-side visibility
- Standard side rearview mirrors
Optional accessories designed to integrate with the OPS poly cab system:
- Heater (same as the deluxe glass cab)
- OPS and roof mounted lights
- Interior lights
- OPS overhead organizer
- Gator™ utility vehicle OPS and deluxe cab cover
- Floor mats
Improve the OPS Poly Cab seal on the Gator™ Utility Vehicle with the addition of the seal kit which installs around the doors, windshield, roof, and cab frame.
Compatible with OPS Poly Cabs installed on 2 passenger A3 & A3T Military, XUV625, XUV825i/E/M, XUV855D/E/M, HPX615, and HPX815 diesel Gator™ Utility Vehicles.
Glass door kit shown on deluxe cab frame with front windshield and rear window (shown with optional beacon light and light kits)
Glass door kit includes:
- Large, premium glass doors for greater visibility
- Key lock guard against theft (two keys provided)
- Commercial-grade gas shocks provide effortless one-hand opening and closing
Requires deluxe door close off panel (BM25445)
Compatible with the following vehicles:
- Model year 2015 and newer – Gator™ XUV 625i and 825i when equipped with deluxe door close off panel (BM25445), (not compatible with XUV 825i S4, 855D, 855D S4).
NOTE: Air-cleaner relocation kit and noise-reduction kit is recommended to reduce the noise and vibration levels within the deluxe cab when the glass door kit is installed.
The rear window kit includes:
-
Premium-grade rear glass and mounting hardware
It is compatible with the following vehicles:
-
All Gator™ model year 2011 and beyond HPX Gas, HPX Diesel, XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with a deluxe cab frame
The rear panel for the OPS poly cab is ideal for outdoor enthusiasts and others desiring four-season weather protection.
The Poly Cab is sold as individual components; OPS poly or glass windshield, OPS poly roof, OPS rear panel, and doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.
Key features of the rear panel:
- Rear panel is thermoformed from thick ABS plastic for impact resistance, durability, and style
- Three-piece sliding glass window, which provides excellent visibility and ventilation
- Installs in minutes with quick clamps to the OPS structure
- Installed with full windshield (vent open) to help eliminate dust from entering operator station
Compatible with:
- MY13-current HPX (if equipped with cargo box power lift)
- MY13-current 625i
- MY13-current 825i and 825i S4
- MY13-current 855D and 855D S4
The poly cab doors for the operator protection system (OPS) poly cab is ideal for outdoor enthusiasts. Doors are not sealed for water tight performance.
The poly cab is sold as individual components; OPS poly or glass windshield, OPS poly roof, OPS rear panel, and the doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.
Key features of the poly cab doors:
- Doors are thermoformed from thick acrylonitrile butadiene styrene (ABS) plastic for impact resistance, durability, and style
- Reinforced with steel tubing for rigidity
- Mounted on heavy-duty hinges for durability
- Automotive-style latches
- Locking door handle
- Large glass sliding windows provide excellent side-to-side visibility
- Standard side rearview mirrors
- Integrated seals to improve the operator enclosure
Optional accessories designed to integrate with the OPS poly cab system include:
- Heater (same as the deluxe glass cab)
- OPS and roof mounted lights
- OPS seat belt comfort strap
- OPS overhead organizer
- Gator™ utility vehicle OPS and deluxe cab cover
- Floor mats
Compatible with:
- Model year 2013 to current Gator XUV625i Utility Vehicles
- Model year 2013 - current Gator XUV 825i/E/M and XUV 855D/E/M Utility Vehicles (not compatible with S4 models)
Cargo Box
The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.
The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.
The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.
Product features include:
- Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m3 (26 cu ft)
- Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
- Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
- Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
- Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
- Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
- Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
- Compatible with Gator cabs and bedliner
NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.
A – Fender flare
B – Fender
The rear fender flare kit minimizes debris from reaching the operator station.
Product features include:
- Two pliable fender flares (one for each side)
- Hardware for mounting on the sides
- Compatible with all model year 2011 to current Gator™ XUV825, XUV825 S4, XUV855, XUV855 S4, XUV835, and XUV865 Utility Vehicles
- Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
- Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles
The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.
Cargo Box Lift
Overview
The Gator™ utility vehicles can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to this highly capable utility vehicle.
Benefits
- Capable of lifting a maximum vehicle cargo box load of 454 kg (1000 lb)
- Lifts box to 49 degrees from horizontal for ease of service and cargo box load removal
- Quick horizontal-to-49-degree time
- Can be installed in minutes using the vehicle's prewired connectors and mounting points
- Compact design fits nicely around transmission and linkages, providing full protection
- Fully sealed and weatherproof hydraulic design does not require maintenance and is built for maximum durability
- Driven by proven electric motor and gear pump
- Electric motor protected by a circuit breaker
- Integrated check valve assures load holding
- Overload relief valve protects against misuse
- No setup required for hydraulics
Cold Start Packages
Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.
Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.
Cover
The deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage.
- Two side mesh-stuff beverage pockets hold drinks, and a big rear zippered cargo pocket and mesh-stuff pocket keep tools and gear readily available
- Little zippered side key
- Elastic cord in the hem provides a custom fit
- Handy fabric storage case and John Deere key ring
- Three-year warranty
- Large, fits backrests up to 457 mm (18 in.)
Ordering information
Contact the local John Deere dealer for availability and pricing information.
Deluxe seat cover (large)
Order number: LP92634
The cover protects unused seats and renews worn seats.
Cushioned seat for extra comfort
- Four convenient pockets keep tools and gear within reach
- Central water drain hole keeps water from pooling
- Elastic cord at hem for a custom fit
- Medium size fits backrests up to 381 mm (15 in.)
- Large size fits backrests up to 457 mm (18 in.)
- Two-year warranty
Ordering information
Contact the local John Deere dealer for availability and pricing information.
Seat cover (large)
Order number: LP92334
-
Provides year-round weather protection to a vehicle equipped with an operator protection system (OPS) or full enclosure (cab)
-
Heavy-weight polyester fabric for maximum durability and resistance to tear
-
Polyurethane-coated for maximum water resistance and repellency
-
Dual reinforced air vents let air circulate and help to prevent ballooning in wind
-
Reinforced rear corners for added durability
-
Elastic shock cord in the bottom hem for a quick custom-like fit
-
Compatible with the following models:
-
Traditional Series models (TS, TX, TX Turf, TH 6x4, TH 6x4 Diesel, and TE when equipped with a full enclosure), and HPX 4x4, HPX 4x4 Diesel, HPX 4x4 Trail, XUV 620i, and XUV 850D (with OPS or deluxe cab structure and accessories)
-
Gator™ model year 2011 XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles (with OPS or deluxe cab structure and accessories)
-
Ordering information
Please contact the local John Deere dealer for availability and pricing information.
Vehicle cover (full size—cab or structure)
Order number: LP93107
Drawbar
Description:
- Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
-
Steel construction has a 25-mm (1-in.) ball hole size
-
Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
- Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
- Compatible with HPX 615 and 815 Utility Vehicles
-
Compatible with XUV 620i and XUV 850D Utility Vehicles
NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.
Floor Mat
The washable rubber mat protects the vehicle floor.
Compatible with Gator HPX, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, M-Gator™ A2 Military, and M-Gator A3 Military Utility Vehicles.
Front Rack
Expand the work capabilities of a Gator™ Utility Vehicle with the addition of the front hood rack designed specifically for all model year 2011 Gator XUV625i, XUV825i, XUV855D, and M-Gator A2 Utility Vehicles. This generously sized rack (121.9-cm [48 in.] long x 34.3-cm [13.5 in.] wide x 8.9-cm [3.5 in.] deep) will haul up to a 45.4-kg (100-lb) payload.
It is also compatible with model year 2013-current Gator XUV825i S4 and 855D S4 Utility Vehicles, and model year 2018-current gas and diesel HPX Utility Vehicles.
The rack easily mounts to the required BM22841 front brush guard. Once mounted, the rack tilts forward with the brush guard to allow full access to under-hood storage and service points.
The front hood rack is compatible with the occupant protective structure (OPS), OPS poly windshields, and deluxe cab system. The front windshield will open to the vent position, but it will not open all the way unless the front hood rack is swung forward.
Guards
The heavy-duty fender guards provide a modern and aggressive appearance for all model year 2011-current Gator™ XUV625i, XUV825i, XUV855D, and M-Gator A2 Utility Vehicles.
It is also compatible with model year 2013-current Gator XUV825i S4 and 855D S4, and model year 2018-current gas and diesel HPX Utility Vehicles.
- Large, 1.75-in. (44.45-mm) diameter tubing provides superb protection for the front grille, lights, and fenders
- Compatible with standard front bumper
NOTE: Images above show brush guard with Adventure light kit installed.
The heavy-duty brush guard provides a modern and aggressive appearance for all model year 2011 to current Gator™ XUV625i, XUV825i, XUV855D, and M-Gator A2 Utility Vehicles. It is compatible with model year 2018-current gas and diesel HPX Utility Vehicles.
- Massive welded brush guard is made of large-diameter, 44.45-mm (1.75-in.) tubing and thick steel plates to provide superb protection for the front grille, lights, and hood
- Possesses welded brackets for quick installation of the Adventure light kit
- Rotates forward without tools for easy access to service points and additional storage under the hood
The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.
Harnesses
The beacon light harness kit is required when installing the beacon light.
The kit includes the switch to mount in the operator protection system (OPS) switch bank and wire harness between the OPS switch bank and beacon light.
The brush guard light harness kit is required when installing the light kits to the brush guard on Gator™ utility vehicles.
The kit includes the switches and wire harnesses.
Required to power electrical cab accessories, the electrical kit includes the following components:
-
Main cab harness
-
30-amp fuse holder
-
30-amp fuse
It is compatible with the following vehicles:
-
All Gator™ model year 2004-current HPX, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame
-
All Gator model year 2011-current XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with a deluxe cab frame
The front OPS/roof light harness kit is required when installing the light kits to the front of the OPS or roof. Also requires OPS switch bank.
The kit includes the switch and wire harnesses from the OPS switch bank to the lights.
The rear OPS/roof light harness kit is required when installing the light kits to the rear of the OPS or roof. Also requires OPS switch bank.
The kit includes the switch and wire harnesses from the OPS switch bank to the lights.
The turn signal light harness kit is required when installing the turn signal light kit.
The kit includes the switches and wire harnesses.
Compatible with Gator™ HPX, XUV560, XUV550, XUV590i, XUV590i S4, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.
Heater
Three directional louvers provide windshield defrosting and complete operator comfort.
Kit includes:
-
High-output two-speed heater
-
Mounting hardware
-
Coolant hoses
-
Electrical harness
Heater outputs around 9800 BTU
Compatible with the following vehicles:
-
All model year 2011 - current Gator™ HPX Gas, HPX Diesel, XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 Utility Vehicles
-
Also compatible with model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles
It is compatible with the following vehicles:
-
All model year 2011 - current Gator™ XUV 855D and M-Gator™ A2 Utility Vehicles
-
This heater fitting kit works with BM23608 heater kit and diesel engine
-
-
All model year 2004 - current Gator HPX and XUV 850D Utility Vehicles
-
This heater fitting kit works with BM23608 heater kit and diesel engine
-
-
All model year 2013 - current Gator XUV 855D S4 Utility Vehicles
-
This heater fitting kit works with BM23608 heater kit and diesel engine
-
Horn
Kit includes:
- Horn
- Mounting brackets
- Wire harness and switch
The switch mounts on the dash of the vehicle, while the wiring harness connects to the main vehicle harness.
Lighting
Features and benefits:
- 3-in. (76-mm) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
- Especially useful for working around properties and job sites
- Acrylic amber lens resists scratching and scuffing
- Impact-resistant nylon housing
- SAE J845 (Class 3)-compliant
- UL recognized
- Stands 4.4 in. (111.5 mm) tall
Compatible with the following vehicles:
- Model year 2006 to current Gator™ HPX Utility Vehicles
- Requires poly roof and operator protection system (OPS) switch bank for mounting
- Requires beacon light harness kit
- Gator XUV 620i and 850D Utility Vehicles
- Requires poly roof and OPS switch bank for mounting
- Requires beacon light harness kit
- Model year 2011 to current Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
- Requires poly roof and OPS switch bank for mounting
- Requires beacon light harness kit
- Gator XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4 Utility Vehicles
- Requires OPS switch bank and brake/tail light for brake light mounting or OPS switch bank and poly roof for roof mounting
- Requires beacon light harness kit
- Gator RSX Utility Vehicles
- Requires OPS switch bank and brake/taillight for brake light mounting or OPS switch bank and poly roof for roof mounting
- Requires beacon light harness kit
Rotary light provides excellent visibility to vehicle bystanders:
-
Especially useful for working around properties and job sites
-
Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the light installed
-
Contains a breakaway mounting system
-
Sealed package (waterproof)
-
Amber lenses are rugged, shatter-resistant poly material
-
-
Light assembly bolts to the rear of the cab frame
-
Convenient overhead mounted on/off rocker switch for easy operation
-
As with all Gator electrical kits, the light kit ties into the vehicle's wiring harness for quick installation
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator A1 when equipped with a hard-door cab and electrical kit
The integrated brake and taillight kit offers an updated stylish design in addition to being highly visible in all light conditions.
NOTE: For model year 2018 and newer HPX615 and HPX815 Utility Vehicles, the reverse lights will not illuminate.
Compatible with:
- Model year 2017 – newer Gator™ XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4 Utility Vehicles
- Model year 2018 – newer Gator HPX615 and HPX815 Utility Vehicles
Two 55-W halogen lights provide superb visibility for nighttime operation:
-
Especially useful for working around properties and job sites
-
Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the lights installed
-
Light assemblies bolt to the front of the cab frame, creating a consistent lighting pattern
-
Convenient overhead-mounted on/off rocker switch for easy operation
-
As with all Gator electrical kits, the light kit ties into the vehicle's wiring harness for quick installation
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator A1 when equipped with a hard-door cab and electrical kit
-
Interior overhead light provides visibility for nighttime operation
-
Light assembly bolts into the overhead panel of the cab for automotive styling
-
Contains an on/off rocker switch for easy operation
-
As with all Gator electrical kits, the light kit ties into the vehicle's wiring harness for quick installation
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles
-
All Gator HPX model year 2004 to current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
Traditional Series—TS, TX, TX Turf, and TH 6x4 when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator A1—when equipped with a hard-door cab and electrical kit
LED Single Beam Headlights - 57H6MBUC10876
Product attributes:
- Accommodates up to three sets of OPS lights
- Allows for simple wire routing - only two wires run through the OPS or roll-over protective structure (ROPS) tubes; each light kit has its own switch and wiring harness
- Switches are located in the OPS or rollover protective structure (ROPS)
Compatible with:
- Model year 2011 - current Gator™ XUV, HPX Gas, HPX Diesel, and M-Gator A2 Non-Military Utility Vehicles
- Model year 2012-2013 Gator XUV 550, XUV 550 S4, and RSX Utility Vehicles
- Model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles
- Current Gator XUV560, XUV560 S4, XUV590, and XUV590 S4 Utility Vehicles
One 55-W halogen light provides superb visibility for nighttime operation:
-
Especially useful for working around properties and job sites
-
Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the lights installed
-
Light assembly bolts to the rear of the cab frame, creating a consistent lighting pattern
-
Convenient overhead-mounted on/off rocker switch enables easy operation
-
As with all Gator electrical kits, the light kit ties into the vehicle's wiring harness for quick installation
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
All Gator HPX model year 2004 to current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator A1 when equipped with a hard-door cab and electrical kit
Increase the capability of the Gator™ Utility Vehicle by adding work lights. Lights mount to the front or rear of the poly roof or directly to the operator protection system (OPS).
Kit includes the pair of work lights and hardware. Requires necessary light harness kit based on desired mounting location.
Lights can also be installed in a low mount position behind the front bumper.
Product attributes:
- This flood light kit provides a wide range of light, making it ideal for tasks at night
- Especially useful for working around properties and job sites
- Requires OPS switch bank when mounted to roof or OPS
Compatible with:
- XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4
- HPX
- XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4
- RSX Utility Vehicles
Mirrors
The OPS rearview mirror for Gator™ Utility Vehicles can be installed when equipped with an OPS.
The rearview mirror can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.
Product attributes include:
- Composite components made of impact resistance materials
- Installs with quick clamp to OPS tube
- Compatibility with all Gator Utility Vehicles equipped with an OPS
The OPS side mirrors for Gator Utility Vehicles can be installed when they are equipped with OPS.
The side mirrors can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.
Product attributes include:
- Composite components made of impact-resistant materials
- Installs without tools and easily adjustable
- Compatibility with all Gator HPX, XUV 620i, XUV 850D, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, RSX, M-Gator A2, and M-Gator A3 Utility Vehicles equipped with an OPS
NOTE: OPS side mirrors are not compatible with the deluxe cab or poly cabs (poly cabs include standard mirrors).
The rigid design of the exterior mirror kit allows the Gator to be hauled on a trailer forward or backward at highway speeds with the mirrors installed.
-
Adjustable mirror assembly bolts to the cab frame
-
Contains a breakaway mounting system
The kit is compatible with the following vehicles:
-
All Gator model year 2011 - current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles equipped with a deluxe glass cab.
-
All Gator XUV 620i and 850D Utility Vehicles equipped with a deluxe glass cab.
Operator's Station
The air cleaner relocation kit is designed to lower the engine intake noise by moving the remote engine air-intake filter inlet to the outside of the battery enclosure, reducing resonance and vibration through the battery box. The kit permits easy access to the air filter for service. It is not recommended to install this kit when the vehicle is used in extreme dusty conditions as the air filter intake is now located outside of the vehicle.
The kit includes the following parts:
- New assembled air cleaner
- New air cleaner retainer
NOTE:
- Not compatible with windshield washer kit for deluxe cab
- Requires noise reduction kit to be compatible with closeout panels provided with glass door kit for the deluxe cab
Compatible with:
- Model Year 2015 – current HPX (Gas & Diesel), XUV625i, XUV855Di (Not S4)
The kit includes the following parts:
- Assembled air-cleaner cover (replaces the closeout-panel kit included in deluxe cab door kit, located on the right side)
- Two foam pads
- Vinyl cover
The air-cleaner cover isolates the engine air-intake filter reducing sound and vibration in the cab. The battery compartment is covered by two foam pads, which dampen the engine air-intake noise and vibrations. The vinyl cover completes the closeout between the air-cleaner cover and vehicle frame.
NOTE:
- Deluxe cab door kit is required
- Air-cleaner relocation kit is recommended for best noise- and vibration-reduction performance
Compatible with all Gator™ HPX, HPX Diesel, XUV 625i, XUV 825i, XUV 855D, and M-Gator A2 and A3 Utility Vehicles when equipped with door kit.
The OSR door kits are replacement kits for the factory-installed OSR doors, or can be installed on vehicles that had the OSR nets installed from the factory. These OSR doors can only be installed on model year 2014 or later Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles.
The OSR color panels are sold separately, and can be installed on the OSR doors or the deluxe poly door.
The conveniently placed overhead visor provides sun protection.
It is compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame
-
All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab
-
M-Gato A1 when equipped with a hard-door cab
Radio
Features include:
- Convenient netted storage area to store items such as, sunglasses, CDs, maps, and other personal items
- Two pre-mounted speakers
- Two interior lights; each light can be independently operated
- A 3-switch bank to operate various roof and OPS mounted accessories
Compatible with:
- Model year 2013 - current Gator™ HPX Utility Vehicles also equipped with a poly roof
- Model year 2013 - current Gator XUV 625i, 825i, and 855D Utility Vehicles also equipped with a poly roof
NOTE: Not compatible with deluxe cab frames.
The OPS stereo mounting kit includes the mounting kit only; the customer must choose one of the following three-head units to have a complete stereo:
- SWJHD1120 stereo, heavy-duty AM/FM/weatherband/auxiliary
- SWJHD1620 stereo, heavy-duty AM/FM/weatherband/SIRIUS® Satellite/iPod® ready
- SWJHD3620 stereo, heavy-duty AM/FM/weatherband/CD/SIRIUS Satellite/USB 2.0
- SWJDABIPDL iPod adaptor cable for SWJHD1620 and SWJHD3620
SIRIUS is a U.S.-registered trademark of SIRIUS XM Radio Inc. iPod is a U.S.-registered trademark of Apple Incorporated.
Features include:
- Location for head unit (sold separately)
- Two pre-mounted speakers
- Antenna
- Switch the bank to mount switches for deluxe cab accessories
Compatible with:
- HPX, XUV 625i, 825i, 855D when equipped with deluxe cab frame
The deluxe cab stereo mounting kit includes the mounting kit only; the customer must choose one of the following three head units through Parts to have a complete stereo:
- SWJHD1130 stereo, heavy-duty AM/FM/weatherband/auxiliary
- SWJHD1630 stereo, heavy-duty AM/FM/weatherband/SIRIUS® Satellite/iPod®-ready
- SWJHD3630BT stereo, heavy-duty AM/FM/weatherband/CD/auxiliary/SIRIUS Satellite/ iPod-ready/Bluetooth®
SIRIUS is a trademark of SIRIUS XM Radio Inc. iPod is a trademark of Apple Incorporated. Bluetooth is a trademark of Bluetooth SIG Incorporated.
Roof
-
Provides year-round weather protection to the operator and passenger when a Gator™ HPX or XUV is equipped with an operator protection system (OPS)
-
Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
-
One-piece, soft roof easily attaches and detaches to the OPS with four adjustable straps—no tools required
-
Heavy-weight polyester fabric for maximum durability and resistance to tear
-
PVC coated for maximum water resistance and repellency
-
Compatible with the following models:
-
Gator HPX 4x4, HPX 4x4 Diesel, HPX 4x4 Trail, XUV 620i, and XUV 850D (with OPS only)
-
Gator model year 2011 XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles
-
-
Compatible with the OPS rear screen, OPS poly half windshield (not compatible with OPS poly full windshield), and OPS organizer
NOTE: Must be removed for transport on an open trailer or truck.
Ordering information
Contact your local John Deere dealer for availability and pricing information.
OPS soft roof
Order number: LP91327
Product attributes
- Provides all-year-round weather protection to the operator and passenger when a Gator™ XUV or HPX is equipped with an operator protection system (OPS)
- One-piece ABS roof easily attaches/detaches to the OPS quick-clamp mounting system
- Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
- Molded-in water troughs route water away from the operator and passenger
- Acts as the foundation to build an OPS poly full enclosure (designed to work with the OPS poly full windshield kit and OPS poly rear panel and doors kit)
- Compatible with all model year 2013 – current HPX, XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with an OPS
Seat
Available through OrderZone
Each kit contains: one bench base cover, one backrest cover, and installation instructions
Special features:
- Exceptional abrasion, tear, and puncture resistant
- Constructed with military-grade Cordura™ fabrics
- Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
- Quick and easy installation
- Also available in REALTREE HARDWOODS HD™ pattern
- Front seat has modular lightweight load-carrying equipment MOLLE webbing between driver and passenger for MOLLE pouches
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
Kit includes two comfort straps for the left and right seat belts.
- Provides relief to the operator's and passenger's upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
- Moves the upper mounting point of the seat belt down 6 in. (152 mm)
- Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
- Compatible with all model year 2017 - current Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, and RSX860i Utility Vehicles when equipped with standard Occupant Protective Structure (OPS)
- Compatible only with standard Occupant Protective Structure (OPS), for deluxe cab frame, order BM22703
A seat belt comfort strap is available for Gator™ Utility Vehicles equipped with an Occupant Protective Structure (OPS) or roll-over protective structure (ROPS).
Product attributes
- Kit includes two comfort straps for the left and right seat belts
- Provides relief to the operator's and passenger's upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
- Moves the upper mounting point of the seat belt down 6 in. (152 mm).
- Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
- Compatible with XUV620i and XUV850D Utility Vehicles
- Compatible with Model Year 2015 and older Gator HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4 and Military A3 Utility Vehicles
- Compatible with Model Year 2016 to current Gator HPX, XUV625i, XUV825i and XUV855D Utility Vehicles equipped with a Deluxe Cab
- Compatible with Model Year 2015 and older Gator XUV550, XUV550 S4, and RSX Utility Vehicles
Sprayers
The 45-gal. (170-L) Gator bed sprayer is designed to work with the Gator vehicles equipped with the steel bed or deluxe cargo box. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 43-in. boom that sprays a 120-in. swath. It's equipped with a 20-ft hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft. It comes equipped with rubber feet and custom brackets, which secure to the Gator bed, for a no tools mount.
Special features:
- 45-gal. (170-L) capacity
- Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
- Brackets allow boom height adjustment
- 100 psi SHURflo diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage
- The fully adjustable brass spray wand tip achieves streams up to 30 ft
- Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
- Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
- On/off switch located near operator
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- 12-V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
45 U.S. gal. (170 L) |
|
Pump |
|
Diaphragm material |
|
2.1 U.S. gpm (8 L/min) | |
Remote spray method |
|
Spray wand |
|
Tip material |
|
Adjustment | Fan-to-stream |
Hose length | 20-ft nylon reinforced rubber |
Boom |
|
Boom width | 43-in. (109 cm) fixed |
Spray swath | 120-in. (305 cm) |
Spray tip(s) | Three - TF-VP3 |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
|
Ordering information
Contact the local John Deere dealer for availability and pricing information.
45-gal. (170-L) Gator bed sprayer
Order number: LP20852
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 45-gal. (170-L) capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.
NOTE: Sprayer shown above with optional 150-in. precision boom (LP22885).
High-performance features:
- 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 35-ft stream
- Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
- Glycerin-filled pressure gauge and TeeJet™ pressure regulation/recirculation valve
- Choice of booms (sold separately)
- On/off capabilities in the palm of your hand with the included sprayer remote control (LP22912)
- 12V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Pump |
|
Diaphragm material |
|
3.6 U.S. gpm (13.6 L/min) | |
Remote spray method |
|
Spray wand |
|
Tip material |
|
Adjustment | Fan-to-stream |
Hose length | 20-ft - 1/2-in. nylon reinforced rubber |
Gauge |
Glycerin filled |
Spray control |
|
Boom (sold separately) |
|
Option 1 | 150-in. spray width precision folding (5 tip) |
Option 2 | 120-in. spray width (3 tip) |
Option 3 | 24-ft boomless nozzle |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
|
Ordering information
Contact the local John Deere dealer for availability and pricing information.
High-performance 45-gal. (170-L) Gator bed sprayer
Order number: LP22908
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
This 25-gal. (95-L) Gator™ bed sprayer is a self-contained unit that conveniently sits in the bed of a steel bed Gator, ATV EXT or Gator CX.
It allows the operator to spray trees and shrubs with the spray wand or broadcast spray in a 10-ft swath with the boom.
The 25-gal. (95-L) yellow tank has four rubber feet bolted to the bottom to protect and stabilize the sprayer.
- Sprayer is held in place with the end gate support frame
- Large threaded cap makes fill-up easy
- Easy-to-read gallon marks are molded in
- A built-in sump is provided to completely clean out the spray material
The SHURflo® pump operates at 100 psi and pumps 2.1 gpm.
- Complete wire harness with switch plugs into the 12-V power outlet on the vehicle
The spray boom includes three floodjet nozzles with check valves to prevent dripping:
- Boom is supported by vehicle tailgate
- Spray boom is easily removed when not needed
The sprayer is equipped with a high-quality Spraying Systems Co.® spray wand:
- 14-in. wand with adjustable brass spray tip
- 19-ft hose included
The 25-gal. bed sprayer fits Gators and ATV EXT models, which have cargo boxes.
Specifications
Capacity | 25 U.S. gal. (95 L) |
Pump | |
Type | Electric motor and diaphragm |
Manufacturer | SHURflo |
Operating pressure | 100 psi |
Current draw | 7 amp |
Valve material | Viton® |
Diaphragm material | Santoprene™ |
Strainer | Stainless steel |
Boom spray width | 120 in. (305 cm) |
Spray tip(s) | Three TF-VP3 |
Spray flow rate | 2.1 U.S. gpm (7.9 L/min) |
Remote spray | 19-ft hose with adjustable polypropylene handgun with 14-in. wand |
Handgun material | Polypropylene with Viton components |
Adjustment | Fan-to-stream |
Shipping weight | 35 lb (16 kg) |
Warranty | Two year |
Ordering information
Contact the local John Deere dealer for availability and pricing information.
25-gal. (95-L) bed sprayer
Order number: LP20850
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
The 340-L (90-gal.) Gator bed sprayer is designed to work with any Gator model with load capacities of 363 kg (800 lb) or greater. Extreme capacity is great for athletic fields, a farmette, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 109-cm (43-in.) boom that sprays a 3.05-m (10-ft) swath. Engineered brackets secure the sprayer to the Gator bed with no tools or additional tie-downs required.
Special features:
- 340-L (90-gal.) capacity (custom brackets and plumbing combines two 170-L [45-gal.] tanks)
- Brackets secure to Gator bed, no tools or additional strapping required after initial setup
- Brackets allow boom height adjustment
- 8-L/min (2.1-gpm) Shurflo diaphragm-type pump with 6.9-bar (100 psi) shutoff can be run dry without damage
- Fully adjustable brass spray wand tip achieves streams up to 9.15 m (30 ft)
- Equipped with a 5.8-m (19-ft) hand wand hose with side mount hose tender for convenience
- Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
- On/off switch located near operator
- 12-V plug included with wiring harness for convenient electrical hookup
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Capacity |
340-L (90 U.S. gal.) |
Pump |
|
Type |
Electric motor and diaphragm |
Manufacturer |
Shurflo |
Operating pressure |
6.9 bar (100 psi) |
Current draw |
7 amp |
Valve material |
Viton™ |
Diaphragm material |
Santoprene™ |
Spray flow rate |
8 L/min (2.1 U.S. gpm) |
Sump strainer |
Stainless steel |
Remote spray method |
|
Spray wand |
Polypropylene with Viton components |
Tip material |
Brass |
Adjustment | Fan-to-stream |
Hose length | 5.8-m (19-ft) nylon reinforced rubber |
Boom |
|
Boom width | 109 cm (43 in.) fixed |
Spray swath | 3.05 m (10-ft) |
Spray tip(s) | Three - TF-VP3 |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
All Gator models with bed capacity of 363 kg (800 lb) or greater |
Shipping weight |
20 kg (125 lb) |
Net weight |
19 kg (80 lb) |
Ordering information
Contact a local John Deere dealer for availability and pricing information.
340-L (90-gal.) Gator bed sprayer
Order number: LP20853
Viton is a trademark of The Chemours Company FC, LLC. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 340-L (90-gal.) capacity, high-volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.
NOTE: Sprayer shown above with optional 7.3-m (24-ft) boomless spray nozzles (LP22884).
High-performance features:
- 6.9-bar (100-psi), 15.1-L/min (4-gpm) SHURflo diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 10.7-m (35-ft) stream
- Equipped with a 6.1-m (20-ft) hand wand hose with side mount hose tender for convenience
- Glycerin-filled pressure gauge and TeeJet® pressure regulation/recirculation valve
- Choice of booms (sold separately)
- On/off capabilities in the palm of your hand with the included sprayer remote control (LP22912)
- 12-V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Brackets secure to Gator bed, no tools or additional strapping required after initial setup
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Capacity |
340 L (90 U.S. gal.) |
Pump |
|
Type |
Electric motor and diaphragm |
Manufacturer |
Shurflo |
Operating pressure |
6.9 bar (100 psi) |
Current draw |
7 amp |
Valve material |
Viton™ |
Diaphragm material |
Santoprene™ |
Spray flow rate |
15.1 L/min (4 U.S. gpm) |
Sump strainer |
Stainless steel |
Remote spray method |
|
Spray wand |
Poly, alloy, and brass with Viton components |
Tip material |
Brass and stainless |
Adjustment | Fan-to-stream |
Hose length | 6.1-m (20-ft), 1.3-cm (1/2-in.) nylon reinforced rubber |
Gauge |
Glycerin filled |
Spray control |
Pressure regulation/recirculation |
Remote control |
12-V receiver with dual FOB remote on/off |
Boom (sold separately) |
|
Option 1 | 3.05-m (10-ft) boom (LP22911) |
Option 2 | 3.8-m (12.5-ft) precision spray boom (LP22885) |
Option 3 | 7.3-m (24-ft) boomless spray nozzle (LP22884) |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
All Gator models with a bed capacity of 363 kg (800 lb) or greater |
Shipping weight |
57 kg (125 lb) |
Net weight |
45 kg (100 lb) |
Ordering information
Contact a local John Deere dealer for availability and pricing information.
340-L (90-gal.) high-perfromance Gator bed sprayer
Order number: LP22909
TeeJet is a trademark of Spraying Systems Co. Viton is a trademark of The Chemours Company FC, LLC. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance (HP) single-tank 340.7-L (90-gal.) Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box that have a capacity in excess of 362.9 kg (800 lb). The custom molded 340.7-L (90-gal.) tank provides a low profile with capacity perfect for athletic fields, farmettes, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. Custom engineered mounting hardware ensures the unit stays secure without the use of additional straps or tie-downs. Cover ground quickly with flexible boom options. (Boom sold separately).
High-performance features:
- 100 psi, 4-GPM diaphragm-type pump is designed for high-hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single-hand mist to 10.7-m (35-ft) stream.
- Side-mount hose tender for easy hose access and storage
- Glycerin-filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve for precise sprayer calibration
Additional features:
- Custom engineered brackets secure to Gator bed with no tools or additional straps
- Control valve channels spray to either the boom or spray wand
- Includes Gator accessory wiring harness, complete with quick disconnects, for convenient electrical hookup
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
90 Gallon Rate Control Sprayer - 57H6MLP68194
The standard Gator boom is compatible with all Gator sprayer models and is sold separately for the HP Gator sprayers. This fixed boom is conveniently sized at 43 in. (1.1 m) and does not extend wider than the Gator bed, but it is perfect for covering ground quickly and thoroughly with a 120-in. (3-m) spray swath.
The boom is ideal for basic spraying application. Three tips and check valves round out this offering (boom only, mounting brackets are provided with sprayers).
Boom Features:
- 43-in. (1.1-m) boom with three tips
- Check valves prevent siphoning and dripping
- Sold separately for:
- HP 45-gal. Gator Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
The 150-in. (3.81-m) precision boom is compatible with the HP sprayers. This folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet™ nozzle bodies and commercial grade diaphragm check valves. The outer tips offer versatility with built-in shut offs to allow an adjustable 90-in. (2.3-m), 120-in. (3-m), or 150-in. (3.8-m) spray swath.
150-in. (3.8-m) precision boom features:
- Folding spring hinge
- Breakaway design
- Five TeeJet tips and nozzle bodies
- Adjustable spray swath (90 in., 120 in., 150 in.)
- 1/2-in. industrial-grade rubber hose
- Designed to work with
- HP 45-gal. Gator™ Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
TeeJet is a registered trademark of Spraying Systems Company.
The 24-ft (7.3-m) boomless spray nozzles are compatible with all HP sprayers. This boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary. TeeJet™ nozzle bodies and commercial grade diaphragm check valves round out this offering.
Boomless spray nozzles feature
- Three TeeJet tips and nozzle bodies
- Commercial-grade diaphragm check valves
- 1/2-in. (12.7-mm) industrial-grade rubber hose
- Designed to work with all HP sprayers :
- HP 45-gal. Gator™ Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
TeeJet is a registered trademark of Spraying Systems Company.
The HP 45-gal. (170-L) Tow-Behind Sprayer offers the ultimate in performance and versatility. With a 45-gal. capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It is the perfect match for the customer who wants extreme performance.
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options; a 150 in. (3.8 m) precision folding, 120-in. (3-m) standard three tip, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).
HP features:
- 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 35 ft (10.7 m) stream
- Front-mount hose tender for easy hose access and storage
- Glycerin filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve
- Includes sprayer remote control
Additional features
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gal.)
Boom options (sold separately):
- 150-in. (3810-mm) precision spray boom
- 24-ft (288-in.) boomless spray nozzles
SHURflo is trademark of SHURflo, LLC. TeeJet is a registered trademark of Spraying Systems Company.
The 45-gal. (170-L) trail-type sprayer is equipped with a boom that sprays a wide, 120-in. width.
- Three nozzles for efficient broadcast spraying
- Boom folds up against the tank for storage
A 20-ft hose and handgun are provided.
- The 20-ft hose and handgun are helpful when spraying trees or other remote areas that cannot be reached with the sprayer itself
- A 14-in. wand on the handgun is standard equipment
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction.
- Low center of gravity gives excellent stability
- Equipped with a 4-position hitch
- Rear of the frame is designed so the sprayer will stand upright during storage to reduce the amount of space required
Additional features include:
- Diaphragm-type pump designed for high-hour commercial applications; it can be run dry without damage
- The spray wand is constructed of non-corrosive polypropylene material with Viton® components for remote spray jobs
- Two-wire fused wiring harness complete with quick-disconnects for convenient electrical hookup
- Large cap to easily fill up the tank
- Control valve to channel the spray to the boom or handgun
- Rugged translucent yellow tank with molded fill-level indicators (in gallons)
Specifications
Capacity |
45 U.S. gal. (170 L) |
Pump |
|
Type |
Electric motor |
Manufacturer |
SHURflo® |
Operating pressure |
100 psi |
Current draw |
7 amp |
Valve material |
Viton® |
Diaphragm material |
Santoprene™ |
Strainer |
Stainless steel |
Boom spray width |
120 in. (305 cm) |
Spray tip(s) |
Three #11008VP |
Spray flow rate |
2.1 U.S. gpm (7.9 L/min) |
Remote spray method |
20-ft hose with adjustable polypropylene handgun with 14-in. wand |
Handgun material |
Polypropylene with Viton components |
Adjustment |
Fan-to-stream |
Tires |
15x6-6 pneumatic |
Wheel bearings |
Roller bearings |
Axle diameter |
1 in. (2.5 cm) |
Hitch |
Pin and spring clip, four height positions |
Weight - empty |
80 lb (36.3 kg) |
Weight - full |
456 lb (207 kg) |
Compatible with all Gator models except XUV 550, XUV 550 S4, and RSX Utility Vehicles.
Ordering information
Contact the local John Deere dealer for availability and pricing information.
45-gal. (170-L) tow-behind sprayer
Order number: LP20485
SHURflo is a U.S.-registered trademark of SHURflo, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
Spreaders
Overview
The 0.3-m3 (10-cu ft) in-bed spreader easily expands the capabilities and productivity of operators with Gator XUV825 and XUV855 Full-Size Crossover and HPX Work Series Utility Vehicles. Featuring exclusive controls and ample hopper capacity, these spreaders are the ideal spreading solution to help operators quickly apply large amounts of ice melt materials.
Benefits
- Easily control the spreader with the 9-cm (3.5-in.) weatherproof, color display. Four push buttons are used to navigate functions including independent adjustment of the auger and spinner speeds, vibratory motor settings, reverse on the auger to clear out jammed material, and unload mode to completely empty the hopper. The display conveniently mounts in the hood latch opening on the vehicle's dash.
- Enjoy long periods of spreading ice melt materials with the ample volume of the 0.3-m3 (10-cu ft) poly hopper.
- The 7.6-cm (3-in.) diameter steel auger is powered by a direct-drive motor and features variable speed control, automatic jam clearing, and reverse to clear jammed material.
- Quickly cover large areas up to 9.1-m (30-ft) wide using the 30.5-cm (12-in.) diameter steel spinner with independent speed control.
- The entire assembly can be quickly disconnected to access the hitch and reduce the spreader's overall footprint for storage.
- Eliminate bridged material inside the hopper with the vibratory motor that features four modes (pulse, low, high, and ramp).
- A top screen and fitted tarp are included to help with material handling. The top screen prevents clumped material from entering the hopper, while the fitted tarp keeps material dry.
- Get a dedicated, secure fit to the cargo box from the provided mounting hardware. Two stainless-steel tie-down rods secure the spreader to the tie-down hooks in the bed.
Additional details
The 0.3-m3 (10-cu ft) in-bed spreader is compatible with the following models:
- Model year 2018 and newer XUV825E, XUV825M, XUV855E, and XUV855M
- Model year 2017 and older XUV825i, XUV825i Power Steering, XUV855D, and XUV855D Power Steering
- Model year 2018 and newer HPX615E
- Model year 2017 and older HPX 4x4
Specifications | |
Measurements | |
Length - overall | 183 cm (72 in.) |
Length - spinner removed | 154 cm (60.5 in.) |
Width | 123.2 cm (48.5 in.) |
Height - bottom of spinner to top of hopper | 105 cm (41.4 in.) |
Height - bottom of spreader to top of hopper | 67 cm (26.4 in.) |
Auger diameter | 7.6 cm (3 in.) |
Spinner diameter | 30.5 cm (12 in.) |
Capacities | |
Hopper volume - filled to top screen | 0.3 m3 (10 cu ft) |
Spreader weight - hopper empty | 138 kg (305 lb) |
Spreader weight - hopper full | Varies by material – consult the operator's manual for weight limits |
Materials | |
Hopper | Single-piece polyethylene |
Spinner and frame | Powder-coated steel |
Top screen | 7.9-mm (5/16-in.) powder-coated steel rod |
Motors - auger, spinner, vibrator | 12-V, semi-sealed |
Operation | |
Maximum spreading width | 9.1 m (30 ft) |
Display functions |
|
Warranty | |
Residential | 1 year |
Commercial | 6 months |
-
0.5-m 3 (17-cu ft) capacity
-
453.6-kg (1000-lb) load limit
-
Copolymer polypropylene is compression molded for optimum thickness in all areas and maximum durability
-
Heavy-duty, reinforced structural frame with a 25.4-mm (1-in.) diameter, one-piece axle to handle weight, speed, and bumps
-
Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
-
Double-sealed, high-speed roller bearings to handle a 48-km/h (30-mph) maximum speed
-
Heavy-duty polyethylene bed
-
Accepts dividers to separate cargo (template included)
-
-
All-terrain knobby tires
-
Provides good flotation and traction in mud, sand, and other wet or soft areas
-
Flexes over bumps and ruts for a smoother, more controlled ride
-
Minimizes ground compaction to save turf and prevent ruts in soft ground
-
-
Poly fenders to keep the operator, cart, and vehicle clean
-
Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1.875-in.) ball hitch, including Gator™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models
-
Quality and styling compatible with other John Deere equipment
Ordering information
Contact your local John Deere dealer for availability and pricing information.
17AT Cart
Order number: LPPCT17ATJD
The Gator™ electric fertilizer spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator Utility Vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator salt spreader. Convenience is at the operator’s fingertips with an electronic variable-speed spinner and electronic gate control from the Gator seat. Adjustable flighting allows spread pattern control to make sure the material is applied where it is needed.
Features:
- Powder-coated steel frame
- Electronic variable-speed spinner
- Electrically actuated control of the flow gate
- 10-in. (25.4-cm) diameter spinner is stainless steel with adjustable flighting to control spreader pattern
- 8:1 ratio with bronze gear, grease filled
- Motor is 1/3 hp, 12-V DC, semi sealed
The mounting hitch and control box are sold separately, available through Order Zone.
Ideal for:
- Granular fertilizer
- Seed
- Granular pesticide
- Granular herbicide
Capacity:
- Volume: 3.0 cu ft (0.1 cu m)
- Weight: 240 lb (108.9 kg)
- Spreading width: up to 20 ft (6.1 m)
Includes:
- Side deflector
Compatibility:
- Compatible with all model year 2011 to current heavy-duty Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.
- Compatible with all XUV560 and XUV560 S4 Utility Vehicles.
- Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch-mounting brackets, sold separately through Order Zone.
Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.
The Gator™ electric salt spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator fertilizer spreader. The Gator salt spreader features an electric-driven auger for consistent salt presentation to the spinner. It draws power from the Gator vehicle, so no external power source is needed. It is powered by a variable-speed controller (sold with hitch) for precise spread pattern control.
Features:
- Powder-coated steel frame
- Spinner motor controlled using the vehicle’s 12-V system
- 10-in. (25.4-cm) diameter spinner is nylon/glass reinforced resin for ultimate corrosion resistance
- 5:1 ratio with bronze gear, grease filled
- Motor is 1/3 hp, 12-V DC, semi sealed
The mounting hitch and control box are sold separately. Available through Order Zone.
Ideal for:
- Salt and large granular materials
Capacity:
- Volume: 3.0 cu ft (0.1 cu m)
- Weight: 240 lb (108.9 kg)
- Spreading width: Up to 20 ft (6.1 m)
Compatibility:
- Compatible with all model year 2011 to current heavy-duty XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.
- Compatible with all Gator XUV560 and XUV560 S4 Utility Vehicles.
Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch mounting brackets, sold separately through Order Zone.
Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.
The Gator™ Drop Spreader features heavy-gauge stainless steel construction along with stainless-steel fasteners for exceptional durability in harsh conditions. The segmented rotor accurately meters material and evenly distributes material across the drop width. An industry-exclusive removable rotor tray allows for quick and easy clean out. Ideal for spreading large granular materials (such as rock salt). The 109-cm (43–in.) width is ideal for sidewalks and is suited well for snow and ice contractors, colleges and universities, hospital and health campuses, municipalities and schools, retirement home campuses, etc.
Features:
- Industry-exclusive removable rotor tray that simplifies cleanout and serviceability.
- No tools required to remove or install the rotor tray.
- Segmented stainless-steel rotor for accurate metering of material.
- Operator-controlled vibration motor to eliminate bridging of material.
- Rubber isolator mounts dampen tray vibration when operating vibration motor.
- Remotely mounted control box for power, vibration control, and variable rotor speed control (supplied with required Gator hitch and control package).
- Drivetrain is fully encased in stainless-steel shielding.
- Simplistic rotor drive with slotted chain adjustment plate.
- Six-position gate adjusts from fully closed to 38.1-mm (1 1/2–in.) clearance to meter a wide variety of products. Gate position can be adjusted without using tools.
Specifications:
- Volume: 5.0 ft3 (0.14 m3)
- Weight empty: 191 lb (87 kg)
- Weight full: 540 lb (245 kg)
- Spreading width: 43 in. (109 cm)
Spreader hitches and control boxes are designed to work specifically with 85-L (3-cu ft) salt and fertilizer spreaders and 141.6-L (5-cu ft) drop spreaders. Each hitch features a spring-loaded mechanism to allow for quick spreader attachment and detachment. Additionally, the hitch can be easily lowered to provide access for routine service.
Weather-resistant control boxes provide fingertip control of the spreader's functionality. One rocker switch turns the spreader on and off. For fertilizer spreaders, a second rocker switch handles gate adjustments to control the rate of material flow. On drop spreaders, this switch activates the vibration motor to help keep material flowing. A dial in the center of the box provides control of the spinner speed. Included with every control box is a wiring harness and hardware for convenient dash mounting.
Key features
- Designed specifically for Gator™ utility vehicles to ensure safe and secure spreader fitment
- Powder-coated steel hitch for the utmost support and durability
- Fingertip operation with an easy-to-use control box
Compatibility information
This Gator hitch (LP68163) is designed specifically to work with model year 2018 and newer John Deere HPX615 and HPX815 Series Gator Utility Vehicles.
The 21 Steel Utility Cart is the ideal companion for the Gator™ Utility Vehicle:
-
454-kg (1000-lb) load limit
-
Dump angle of 35/40 degrees
-
Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
-
Large pneumatic tires
-
Provide good flotation in mud, sand, and other wet or soft areas
-
Flex over bumps and ruts for a smoother, more controlled ride
-
Minimize ground compaction to save turf and prevent ruts in soft ground
-
-
Unique bracket less tailgate means no side channels to obstruct materials when emptying
-
When shoveling, recessed flat bolt heads stay out of the way
-
Heavy-duty, reinforced one-piece solid undercarriage
-
Contoured corner bed design
-
Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1-7/8-in.) ball hitch, including Gater™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models
Ordering information
Contact the local John Deere dealer for availability and pricing information.
21 Steel Utility Cart
Order number: LPUT21JD
Storage
This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Side-door opening toolbox features:
- 125-L (4.4-cu ft) sealed storage
- Heavy-gauge sheet metal
- D-rings for tie downs
- Fully sealed lockable latch
- Sealed door
- Door can also be used as a work bench when down
- Can be mounted on either side of the cargo box
Weight |
29 kg (64 lb) |
Capacity |
34 kg (75 lb) |
Dimensions |
Full box: 109.4-cm (43.1-in.) long, 35-cm (13.8–in.) wide, and 32.5-cm (12.8–in.) tall |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
- BM26220 – green and yellow
- BM26218 – olive and black
- BM26219 – camo
This toolbox is compatible with the following Gator™ Utility Vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model year 2018 and newer HPX615 and HPX815
Features of the soft rear screen and organizer:
- Instant shield against wind back draft, rain, and weather
- Protects against the worst winter weather
- Five mesh zippered cargo pockets for tools and gear
- Quickly attaches to the OPS with rip-and-grip straps
- Clear PVC window framed with heavy-duty fabric
- Cell phone or small gear holder
- Two large zippered compartments
- Two beverage pockets
- Stows all your essentials behind the seats
- Rolls up for storage
Compatible with: HPX, XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4 Series Gator™ Utility Vehicles equipped with an occupant protection system (OPS).
Ordering information
Contact the local John Deere dealer for availability and pricing information.
Soft rear screen and organizer - black
Order number: LP93207
This tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).
The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.
Optional label kits are designed to fit with this tailgate:
- BM26220 – green and yellow
- BM26218 – olive and black
- BM26219 – camo
The tailgate is compatible with the following Gator™ utility vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model Year 2018 - current HPX615 and HPX815
This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Top door opening toolbox features:
- 125-L (33-gal.) sealed storage
- Heavy-gauge sheet metal
- D-rings for tie downs
- Fully sealed lockable latch
- Sealed door
- Toolbox divider
- Removable tool tray
- Can be mounted on either side of the cargo box
|
Top door opening toolbox |
Toolbox weight |
32.7 kg (72 lb) |
Toolbox capacity |
32.7 kg (75 lb) |
Toolbox dimensions |
-Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall -125-L (33-gal.) total volume |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
- BM26220 – green and yellow
- BM26218 –olive and black
- BM26219 – Camo
This toolbox is compatible with the following Gator™ Utility Vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model year 2018 and newer HPX615 and HPX815
Suspension
The heavy-duty front strut kit provides improved ride and handling for Gator™ HPX and XUV Utility Vehicles when equipped with a deluxe cab frame with the hard door kit or with a front blade.
-
Two heavy-duty front struts with higher-strength springs replace the standard components
-
Strongly recommended when a Gator HPX or XUV is equipped with a 183-cm (72-in.) front blade or 183-cm (72-in.) V-blade; it will help maintain the lift height of the blade as well as improve ride and handling
-
Recommended when a Gator HPX or XUV (model year 2010 and prior) is equipped with a deluxe cab frame and the hard-door kit
-
For any vehicle configuration in which the operator experiences frequent strikethrough or
bottoming out of the front struts, the heavy-duty front strut kit will help to reduce or
eliminate the occurrence - Not compatible with XUV 855D Utility Vehicles.
Turn Signals
Front Turn Signal Light Kit - 57H6MBUC10608
The deluxe light kit includes brake lights, taillights, turn signals, and four-way flashers. The switches mount to the dash of the vehicle. The wiring harness connects to the standard vehicle harness and requires the turn signal light harness kit.
NOTE: Not intended for use on public roadways.
Compatible with:
- Model year 2018 to current Gator™ HPX615E and HPX815E Utility Vehicles
Winch
This winch also requires a winch mount kit and a 50.8-mm (2-in.) front receiver with recovery loops. Parts in the kit:
- WARN VRX 1587.6-kg (3500-lb) winch
- Roller fairlead assembly
- Hook
- Hook strap
- 3-m (10-ft) hand-held remote
- Winch contactor
WARN is a trademark of WARN Industries, Inc.
Double the pulling power, change the pulling direction, and keep the winch in proper working order.
The accessories kit is essential gear for operators getting the most out of their winch:
-
Effectively anchors to trees/boulders
-
Change the pulling direction
-
Double the pulling capacity
The accessories kit includes:
-
Flexible tree strap
-
Snatch block
-
Shackle
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
Key features
- Wirelessly control winch from up to 15 m (50 ft) away
- Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
- Colored light-emitting diode (LED) lights provide clear operator feedback
- Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware
Compatibility
- Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Winch Mounting Kit
The receiver mount kit includes all of the necessary wire harness, contactor mounts, winch carrier, and hardware to be able to mount the WARN® VRX 1588-kg (3500-lb) winch (sold separately) to the front or rear receiver of the heavy-duty XUV models.
The kit is compatible with model year 2011 and newer XUV625i, XUV825, and XUV855 Gator™ Utility Vehicles and model year 2018 and newer HPX615 and HPX815.
WARN is a trademark of WARN Industries, Inc.
The bumper mount kit includes all of the necessary wire harnesses, contactor mounts, and hardware to mount the WARN® VRX 1588-kg (3500-lb) winch (sold separately) to the front bumper of the heavy-duty XUV models.
This kit is compatible with model year 2013 and newer XUV825 and XUV855 and model year 2018 and newer HPX815 Gator™ Utility Vehicles.
WARN is a trademark of Warn Industries, Inc.
Windscreen
Product attributes
- Provides additional protection to the operator and passenger
- NOTE: Never carry loads in cargo box over load guard
- Includes headrests for additional comfort with the bench and bucket seats
- Perforated, black metal screen easily attaches to the side and upper tubes of the OPS with four quick clamps
- Compatible with the following models:
- HPX: Model year 2013-current
- XUV 625i: Model year 2013-current
- XUV 825i and 825i S4: Model year 2013-current
- XUV 855D and 855D S4: Model year 2013-current
- Not compatible with pre-model year 2013 HPX and XUV’s, including 620i and 850D
Windshield
The windshield kit includes:
-
Premium-grade glass windshield and mounting hardware
-
Windshield wiper and mounting assembly
-
Commercial-grade gas shocks provide effortless one-hand opening/closing
The kit provides a complete automotive seal around the cab frame and possesses three positions for operation and under-the-hood service.
It is compatible with the following vehicles:
-
All Gator™ HPX Gas, HPX Diesel, XUV 620i, XUV 850D, XUV 625i, XUV 825i, and XUV 855D Utility Vehicles when equipped with a deluxe cab frame
The abrasion-resistant full windshield features:
- Quick-clamp mounting system – tool-free installation and removal in seconds
- Manufactured from super-premium, two-sided Makrolon® AR grade abrasion-resistant polycarbonate
- Increased ultraviolet (UV) longevity – resists yellowing longer than optical-grade polycarbonate
- Increased chemical resistance over traditional optical-grade polycarbonate
- Almost as hard as glass with greater impact strength
- Bottom portion flips up and secured in place by two ball studs
Makrolon is a trademark of Bayer Aktiengesellschaft.
The abrasion-resistant half windshield features:
- Quick-clamp mounting system - tool-free installation and removal in seconds
- Manufactured from super-premium, two-sided Makrolon® AR grade abrasion-resistant polycarbonate
- Increased ultraviolet (UV) longevity – resists yellowing longer than optical-grade polycarbonate
- Increased chemical resistance over traditional optical-grade polycarbonate
- Almost as hard as glass with greater impact strength
Makrolon is a trademark of Bayer Aktiengesellschaft.
The glass windshield with wiper features:
- Quick-clamp mounting system - easy installation and removal in seconds
- Laminated, E-mark glass
- The lower section of the windshield seals nicely against the vehicle’s hood to protect occupants from the harshest of elements. It also flips up and is secured by rubber straps to allow increased airflow into the passenger area.
The windshield requires an OPS switch bank (sold separately) to mount the switch.
Especially useful for working around properties and job sites, the windshield washer kit includes these components:
- Mounting hardware
- Spray nozzle
- Large reservoir with electric pump, harness, and hose
- Three-position backlit rocker switch: off, wiper, washer
The reservoir assembly bolts to the frame. A convenient three-position rocker switch controls the windshield wiper and washer fluid. As with all Gator™ Utility Vehicle electrical kits, the washer kit ties into the vehicle's wiring harness for quick installation.
Compatible with the following vehicles:
- All Gator model year 2011-current HPX, XUV 625i, XUV 825i, XUV825i S4, XUV 855D, XUV855D S4, and M-Gator A3 Utility Vehicles
- All Gator model year XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
Especially useful for working around properties and job sites, the windshield washer kit includes these components:
-
Mounting bracket
-
Hardware
-
Spray nozzle
-
Large reservoir with electric pump, harness, and hose
The reservoir assembly bolts to the bottom right rear of the cab frame. A convenient overhead-mounted on/off rocker switch controls the windshield wiper and washer fluid. As with all Gator electrical kits, the washer kit ties into the vehicle's wiring harness for quick installation.
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles
Reviews
1 reviews
- Filter
- Star Rating
- Value
- Quality