×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

XUV865R UTILITY VEHICLE

Crossover Utility Vehicle

  • Three person cockpit
  • Power steering for maneuverability
  • Long lasting LED lights, standard
  • Powerful diesel engine system with cab, heat, and A/C, standard
Starting At:$ 27,049.00
Apply For Financing
Buy OnlineMaintenance Plans
View Product Brochure



Features



The Gator™ XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.

Key elements of the drive system include:

Variable-speed drive
Variable-speed drive Variable-speed drive

The variable-speed drive consists of two clutches and a drive belt:

  • Drive clutch is attached to the engine.
  • Driven clutch is attached to the transaxle.

Features include:

  • The engine braking system utilizes a tight belt for operation, requiring an idler sleeve on the primary clutch for neutral. The secondary clutch is a build-on-shaft design that utilizes a cam to tune the acceleration and deceleration of the vehicle. The clutch will stay engaged, providing deceleration until approximately 5 km/h (3 mph).
  • The continuously variable transmission (CVT) air intake draws in cool air to reduce heat and the amount of water ingestion into the CVT system. The system will reduce belt slippage and improve durability.
  • A low- and high-speed forward gear offering:
    • Low range is 0 km/h to 40 km/h (0 mph to 25 mph), XUV835
    • Low range is 0 km/h to 24 km/h (0 mph to 15 mph), XUV865
    • High range is 0 km/h to 72 km/h (0 mph to 45 mph), XUV835
    • High range is 0 km/h to 45 km/h (0 mph to 28 mph), XUV865
  • Ability to creep along slowly to maneuver in tight spaces
  • Standard full-clutch enclosure with high speed fan provides longer belt and clutch life
  • High-ratio clutches with three cam weights for maximum belt-clamp load in high torque conditions

NOTE: Delivery of torque to the ground and top speed depends on tire size, which is a function of nominal size and pressure.

How the variable-speed drive works:

  1. As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
  2. As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
  3. With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
  4. The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
Transaxle, mechanical front-wheel drive (MFWD), and constant velocity (CV) shafts
Side view of CVT intake and clutch enclosure Side view of CVT intake and clutch enclosure
Differential lock switch and MFWD switch Differential lock switch and MFWD switch
Rear view of transaxle and CV shafts Rear view of transaxle and CV shafts
CV boot protection CV boot protection

Operator interface features:

  • Selectable four-wheel drive (4WD) system with a limited slip front differential and dash-mounted electronic rocker switch
    • Provides exceptional traction in challenging conditions
    • Near instantaneous torque to the front wheels once rocker switch is engaged
    • Maintains turf-friendly operation in two-wheel drive (2WD) mode
    • Combined with rear traction assist (differential lock), provides excellent traction in challenging conditions
    • More control descending hills with 4WD engaged as all four wheels help slow the vehicle down
      • Clutch engagement still necessary to prevent free coasting

Transaxle features:

  • Low, high, neutral, reverse, and park transaxle
  • Automotive-style, integrated park position in transmission
  • Low range for maximum torque delivered to the wheels for hauling, pushing, and pulling
  • High range for maximum vehicle speed
  • To shift out of park, service brake must be pressed to release the parking solenoid. An audible click will be heard and allows the vehicle to shift out of park into the desired gear.

NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels.

  • Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear or neutral.
  • Large, sealed bearings are located inside the housing for better protection and durability
  • Contains gear case for transferring power to the MFWD
  • Splined shaft interfaces for maximum torque transfer and durability
  • All drive gears machined from highest grade gear steel
  • Protected by a skid plate

MFWD features:

  • Electronically selectable by the operator
    • Offers limited slip functionality for precision steering and great traction while pointing and shooting out of a corner.
  • Vertically oriented oil drain for easy maintenance
  • Protected by a steel skid plate and frame

Drive shaft features:

  • Rear CV shaft diameter measures 27 mm (1.1 in.) and is designed for peak engine and braking torque
  • Front CV shaft diameter measures 23 mm (0.91 in.) and is designed for peak engine torque
  • Propshaft is designed for peak engine torque
  • All CV shaft and propshaft joints are maintenance free and protected by exclusive thermoplastic elastomer (TPE) boots for durability
Heating, ventilation, and air conditioning (HVAC) dash shown Heating, ventilation, and air conditioning (HVAC) dash shown

Whether it is a completely open operator station or a factory installed cab, the interior has been redesigned with comfort and ergonomics in mind.

  • Gear shift control and differential switch on the dash
 
HVAC dash shown (R trim)
  • Tilt steering
 
Tilt steering Tilt steering (up position) Tilt steering (down position)
  • Bench seat with driver adjustment
 
Bench seat adjustment
  • Three-wide seating
 
Seating

 

Cab
M cab door M cab door
R cab door R cab door
  • Functioning door windows – roll up and down
Side windows and front window Side windows and front window
Venting position Venting position
  • Fully opening front window with vent position
Headliner shown on an M-trim open station (with optional windshield, wipers, rear panel, and side mirrors installed) Headliner shown on an M-trim open station (with optional windshield, wipers, rear panel, and side mirrors installed)
  • Available interior roof headliner factory installed on M-trim cab units and M-trim heating, ventilation, and air conditioning (HVAC) cab units
Door sealing Door sealing
  • Automotive-style sealing
Styled roof (R roof shown) Styled roof (R roof shown)
  • Styled roof with channels designed-in to move water to the outside edges
Front roof light Front roof light
Rear roof light Rear roof light
  • Molded-in pockets for front and rear light mounting
    • Keeps lights below the roof line for protection
Inner door handle Inner door handle
Outer door handle Outer door handle
  • Easy-opening door handles and mechanisms
M-trim HVAC controls M-trim HVAC controls
  • HVAC – if equipped
HVAC details

Automotive-style controls on the center of the dash - easy and convenient to reach for the operator or passengers

  • Four dash vents
    • Adjustable louvers and face plates
  • Windshield vents mounted on the top of the dash
    • Fast defrost
    • Efficient air flow
  • Air filter on the passenger side of the cab at foot level
  • Three fan speeds
    • 0: off
    • 1: low
    • 2: medium
    • 3: high
  • Temperature adjustment knob
    • Counterclockwise for cooler temperature
    • Clockwise for warmer temperature
  • Four air flow modes
    • Dash vents
    • Dash and floor vents
    • Defroster vents and floor vents
    • Defroster vents
  • HVAC compressor on/off button
    • Pushing the button once turns the air conditioning on - indicator light illuminates blue
    • Push the button again to turn off the air conditioning
  • Air flow constant with compressor on or off
  • Turn compressor off for full engine power
  • Gas machines have an idle bump to raise rpms to assist driving more power for the HVAC system
    • 1075 rpm in any gear at idle with air conditioning on
    • 1400 rpm when in neutral and the park brake is engaged
  • HVAC - if equipped
HVAC controls and vents on the dash HVAC controls and vents on the dash
854-cc (52.1-cu in.) diesel engine 854-cc (52.1-cu in.) diesel engine

The machine is powered by an 854-cc (52.1-cu in.), 3-cylinder, liquid-cooled, four-cycle diesel engine. It produces 48 Nm (35.5-lb-ft) of torque at 2600 rpm.

The advanced engine delivers superb starting, idling, and throttle response during operation.

The engine offers the following performance and reliability features:

  • Indirect-injection diesel with glow plugs ensures fast starts in cold temperatures
  • 17.1 kW (22.9 hp*) at 3600 rpm
  • Overhead valve design for greater efficiency and fuel economy
  • Spin-on oil filter for easy servicing
  • Quiet operation through the entire rpm range
  • Molybdenum-coated pistons
  • High-stiffness cylinder block and gearcase
  • High-flow water pump and optimized water jackets maintain a steady operating temperature and eliminate hot spots
  • Full-pressure lubrication system
  • In-line mechanical fuel pump
  • Five-point, rubber isolated for quiet operation and minimal vibration
  • Dry replaceable dual-element air cleaner with remote intake and a restriction indicator
  • See-through coolant recovery tank permits the operator to check the coolant level without removing the radiator cap
  • Open front grille allows proper air flow and ventilation to the radiator.

*The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

XUV front suspension detail XUV front suspension detail

To complement the robust frame, the XUV is equipped with four-wheel independent suspension.

 

A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.

 

The entire suspension system has been optimized to handle cargo without compromising ride quality or vehicle stability.

 

M-trim cab units (factory installed) and R-trim units have heavy-duty front and rear shocks installed from the factory.

  • A higher spring rate and higher preload force versus standard springs prevent the vehicle from sagging with a heavy payload.
  • These heavy-duty shocks help with the heavier weight of the cab and when attachments are installed, like blades.
Dual A-arm independent front suspension features include:
  • 200.7 mm (7.9 in.) of travel provides ample wheel travel to keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
  • Heavy-duty nodular cast-iron knuckles support the constant-velocity (CV) shaft and wheel
  • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
  • CV shaft protection from sticks that may puncture the rubber boot
  • Coil-over shocks absorb the most demanding terrain
XUV rear suspension detail XUV rear suspension detail
XUV rear suspension detail XUV rear suspension detail

Dual A-arm independent rear suspension features include:

  • Unequal length and dual A-arm construction for superior wheel control and travel
  • 231.14 mm (9.1 in.) of total travel provides ample wheel travel to keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
  • Coil-over shocks absorb the most demanding terrain
  • A-arms made from square/rectangular tubing reduce weight while remaining rigid
  • Heavy-duty nodular cast-iron uprights support wheel loads with a double row of ball bearings
  • CV driveshaft protection from sticks that may puncture the rubber boot
  • Rear sway bar for lateral stability
Deluxe cargo box with optional light protectors Deluxe cargo box with optional light protectors
Top view of cargo box Top view of cargo box

The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust and dents and reduces noise.

Deluxe cargo box tailgate
Tailgate handle Tailgate handle
Tailgate open Tailgate open
Tailgate lowered to 150 degrees Tailgate lowered to 150 degrees

The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate has been improved, features truck-like performance, and can be operated with one hand.

The standard-installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.

Deluxe cargo box tilt
Integrated handle for manual cargo box tilt Integrated handle for manual cargo box tilt

The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.

A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.

Integrated tie-down points
Integrated tie-down point in cargo-box bed Integrated tie-down point in cargo-box bed
Additional tie-down points (TH 6X4 shown) Additional tie-down points (TH 6X4 shown)

The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

  • Four corners inside the cargo box bed
  • Four points on the load guard directly behind the operator station (A)
  • Tie-down bars on either side of the cargo box (B)
  • Six points on the underside of the cargo box frame (circled)
Converting deluxe cargo box to a flatbed
XUV835 Cab shown XUV835 Cab shown
XUV835M Cab shown XUV835M Cab shown

Optional accessories for the deluxe cargo box:

  • See attachment information in the Value Selling Navigator
Specifications

 

 Length  1143 mm (45 in.)
 Width  1320 mm (52 in.)
 Depth  304 mm (12 in.)
 Volume  0.46 m3 (16.4 cu ft)
 Weight capacity  454 kg (1000 lb)
 Dump angle  47 degrees

CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.

On M- and R-trim vehicles, adding attachments and accessories is made easier by the inclusion of some main wiring harnesses that facilitate efficient hook-up.

Roof harness electrical port Roof harness electrical port
Main vehicle harness – winch connection Main vehicle harness – winch connection
  Cargo box lift Backup alarm Brake / tail / reverse lights Speed limiter kit Base radio Heater 2041-kg (4500-lb) winch Premium radio (base radio kit needed) LED lights - front OPS Windshield wiper Windshield washer LED lights - brush guard LED headlights Turn signals Horn Beacon light LED lights - rear OPS Sprayers Spreaders AMS integration kit
           a a,c a,c,d a,c,d a,c,d a,b a,b a,b a,b a,c,e  a,c,e a,f a,f a,c,e,f 
M open                c c,d c,d c,d b b b b c,e c,e f f c,e,f
M cab                        b b b b e f f e,f 
R                                   f f  f

 

                 = connections in base harness 
E-spec attachment harness 
Front attachments harness 
Roof attachment harness 
Front cab harness 
Rear cab harness 
Dash port harness 
If blank, the base chassis harness has the connector for the attachment 

If dual beam headlights are desired, the following bundles are required:

XUV835E/865E:

  • BM26589 – dual beam LED headlights, including three-position rocker switch
  • BUC10809 – front light harness kit
  • BUC10810 – E-spec attachment harness

XUV835M/865M:

  • BM26589 – dual beam LED headlights, including three-position rocker switch
  • BUC10809 – front light harness kit

XUV835R/865R:

  • BM26589 – dual beam LED headlights, including three-position rocker switch

This Gator™ XUV Crossover Utility Vehicle is equipped with power steering and a dual A-arm front suspension. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort:

  • Steel ball-bearings secure the steering shaft and deliver smooth, responsive operation
  • Completely sealed rack and pinion for long life
  • Low steering ratio (lock-to-lock) provides more responsive steering and less operator input
  • Shaft U-joints are phased for a smooth, uninterrupted motion of the steering wheel
  • Tilt steering wheel with 15 degrees of travel
Electric power-assist steering system Electric power-assist steering system

Electric power-assist steering (EPAS) system has advanced features:

  • Anti-kickback feature reduces the amount of steering unwinding when traversing difficult terrain.
  • The system is speed-sensing and adjusts steering effort as the speed of the vehicle changes.
    • As speed increases, there is less steering assist for improved road feel.
    • As speed decreases, steering assist increases to give lower steering efforts for improved maneuverability.
  • A warning/functional light on the instrument panel provides self-diagnostics and a warning light in the situation of no assist.
  • Torque sensor measures steering wheel input so the on-board computer can provide the appropriate output for various driving situations.

With the EPAS system, the operator maintains a direct mechanical linkage from the steering wheel to the front wheels. The power steering system interfaces mechanically with the steering system by being inserted between the steering wheel and the rack-and-pinion assembly.

A differential torque sensor is integrated into the power steering assembly. The circuit board assembly is also integral with the power steering assembly.

Power steering does not reduce turning radius but significantly reduces steering effort by approximately 85 percent compared to models without power steering.

EPAS interface diagram
EPAS interface diagram EPAS interface diagram

The numbered descriptions refer to the EPAS interface diagram shown above:

  1. Torque sensor
  2. Electronic control unit (ECU)
  3. Fail-safe relay
  4. Current/thermal control circuit
  5. Reduction gears
  6. DC motor
  7. Rack and pinion
  8. Function/warning light
  9. Key power and ground
  10. Vehicle speed sensor
  11. Instrument cluster
  12. Relay module

The R trim is cab only and comes with a tan interior and heating, ventilation, and air conditioning (HVAC) as standard equipment. Electrical wiring for increased flexibility for attachments also comes standard.

R-trim level tan interior R-trim level tan interior
  • Headliner is standard
 
Standard headliner 
  • Tan cloth 40/60 bench seat
 
Tan cloth bench seat 
  • Standard light-emitting diode (LED) headlights with high and low beams
LED headlight 
  • A and B post covers
   
Post cover  Post cover 
  • Rear panel cover
 
Rear panel cover 
  • Tan door panels
 
Tan door panels 
  • Interior rearview mirror
 
Rearview mirror 
  • Sun visors
   
Sun visor  Sun visor 
  • Dome light
 
Dome light 
  • Windshield wiper and washer
   
Windshield wiper Windshield washer
Build-to-order options
  • Available factory-installed winch on M- and R-trim units
  • Available factory-installed brush guard
  • Available factory-installed brush guard extensions
  • Available factory-installed rear cargo box fender guards (rear bumper required, also factory installed)

Specifications


Compare the specifications of up to 4 models

Key Specs xuv865r-utility-vehicle
Current Model
Engine power17.0* kW
22.8 hp
Cargo box dimensions1143 x 304.8 x 1320 mm
45 x 12 x 52 in.
Cargo box capacity (weight)454 kg
1000 lb
Towing capacity907 kg
2000 lb
Front suspensionFully independent dual A-arm with adjustable coils; 200.7 mm (7.9 in.) of travel
Rear suspensionFully independent dual A-arm with adjustable coils and sway bar; 231.14 mm (9.1 in.) of travel
Final drivePark, high, low, neutral, reverse transaxle
Four wheel driveDash switch actuated four-wheel drive system with limited slip front differential plus locking rear differential
Fuel capacity42.4 L
11.2 U.S. gal.
Engine
Type4-cycle diesel
Displacement854 cc
Power17.0* kW
22.8 hp
Cooling systemLiquid
Drivetrain
TransmissionContinuously Variable Transmission (CVT) with clutch enclosure
Final drivePark, high, low, neutral, reverse transaxle
Four wheel driveDash switch actuated four-wheel drive system with limited slip front differential plus locking rear differential
Traction assistPositive locking, switch actuated rear differential lock
Descent controlYes
Suspension
FrontFully independent dual A-arm with adjustable coils; 200.7 mm (7.9 in.) of travel
RearFully independent dual A-arm with adjustable coils and sway bar; 231.14 mm (9.1 in.) of travel
Brakes
TypeFront/rear hydraulic disc with twin piston front calipers
Park brakeOptional factory-installed secondary foot operated (hand release)
Tires / Wheels
Front26x9-12 Ancla® M-T (aggressive terrain) or 25x9-12 Terrahawk AT (all terrain) or 27x9-R14 Maxxis® Bighorn® radials (extreme terrain)
Rear26x11-12 Ancla M-T (aggressive terrain) or 25x11-12 Terrahawk AT (all terrain) or 27x11-R14 Maxxis Bighorn radials (extreme terrain)
Dimensions / Capacities
Wheelbase2146 mm
84.5 in.
Operating weight (includes fuel/fluids)1058 kg
2332 lb
*Additional attachments and accessories will add weight
Length3228 mm
127 in.
Width1618 mm
63.7 in.
With doors: 1763 mm
69.4 in.
Height1981 mm
78 in.
With roof: 1987 mm
78.25 in.
Tread centersFront: 1341 mm
52.8 in.
Rear: 1259 mm
49.6 in.
Ground clearance284 mm
11.2 in.
Fuel capacity42.4 L
11.2 U.S. gal.
Cargo box dimensions1143 x 304.8 x 1320 mm
45 x 12 x 52 in.
Cargo box capacity (weight)454 kg
1000 lb
Payload capacity487 kg
1074 lb
Towing capacity907 kg
2000 lb
HitchStandard receiver: 5.1 cm
2 in.
Features
ColorGreen and yellow, camouflage, olive and black
Power steeringNo on E Trim; Yes on M and R Trim
Battery / Alternator / Power port480 CCA 85 amp @ 7000 rpm, 1020 watts
InstrumentationDigital display (gear position, system diagnostic light, speed, rpm, 4WD indicator, rear differential indicator, fuel level, coolant temperature, hour meter, miles, and service interval warning light)
StorageFour cup holders (two additional for cab units)
In dash
Under seat: 56.69 L
2 cu ft
Glovebox: 3.85 L
0.136 cu ft
Optional under hood - except for HVAC units or units with dealer-installed heater kit
SeatingBench (available bucket seats on E and M Trim)
HeadlightsSingle-beam halogen (single-beam LED on R Trim)

Offers and Discounts

Up to $750 OFF¹

on New John Deere Full-Size Gator UTVs

  • Save $750¹ on MY20 & Older Full-Size Gator Utility Vehicles
  • Offer available 15 September 2020 through 30 October 2020

0% APR Financing options are available ‑

Click for details
Three-quarter view of TX Turf Gator Utility Vehicle

3.90% APR fixed rate for 84 Months¹,² OR No-Interest if Paid in Full within 12 Months³

on New John Deere Gator UTVs

  • 3.90% APR fixed rate for 84 Months¹,² OR
  • No-interest if paid in full within 12 months³
    • Interest will be charged to your account at 17.90% APR from the purchase date if the purchase balance is not paid in full within 12 months³ or if your account is otherwise in default.
  • Offers available 05 August 2020 through 30 October 2020.

¹Offer available on qualifying purchases made between 15 September 2020 and 30 October 2020. Offer available on the purchase of any model year 2020 & older Full-Size Utility Vehicles in the U.S. only. Prices and savings in U.S. dollars. See your participating dealer for details.

¹Offer valid on qualifying purchases made between 05 August 2020 to 30 October 2020. This offer excludes TX Turf Gators™ and ProGators. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 3.9% APR is for 84 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 18.25% APR. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

²Offer valid on qualifying purchases made between 05 August 2020 to 30 October 2020. This offer excludes TX Turf Gators™ and ProGators. Subject to approved installment credit with John Deere Financial, for consumer and ag use only. Down payment may be required. Average down payment is 10%. $13.62 per month for every $1,000 financed. 3.90% APR for 84 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

³Offer valid on qualifying purchases made between 05 August 2020 to 30 October 2020. This offer excludes TX Turf Gators™ and ProGators. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. Interest will be charged to your account from the purchase date at 17.9% APR if the purchase balance is not paid in full within 12 months or if your account is otherwise in default. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

Accessories and Attachments

Ag Management Solutions

StarFire™ 3000 Receiver installed on XUV835RStarFire™ 3000 Receiver installed on XUV835R
GreenStar™ display installed on XUV835R with optional phone and tablet mountsGreenStar™ display installed on XUV835R with optional phone and tablet mounts

The AMS integration kit allows the operator to mount a StarFire Receiver and GreenStar display (both receiver and display sold separately) to the Gator™ Utility Vehicle.

 

Key features of the AMS integration kit:

  • Compatible with StarFire iTC, StarFire 3000, and StarFire 6000 Receivers
  • Compatible with GreenStar 2 1800, GreenStar 2 2600, GreenStar 3 2630, and John Deere 4640 Universal Display
  • Ability to mount receiver to the poly roof or on the occupant protective structure (OPS) alone

 

NOTE: Additional components are required to support the John Deere 4640 Universal Display include:

  • AL212683 (1)
  • 21M7577 (2)

 

Common applications:

  • Boundary mapping
  • Flagging field obstacles
  • Soil sampling

 

Compatibility:

  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

 

Electrical harness requirements:

 XUV835/865  Attachment harness required (see below)
 E1, 3, 5, 6
M (open station)3, 5, 6
M (cab, factory installed)5, 6
R6
 1 E-spec attachment harness
 2 Front attachment harness
 3 Roof attachments harness
 4 Front cab harness
 5 Rear cab harness
 6 Dash port harness
 CodeAttachmentDescription
 BUC10634AMS integration kit

Backup Alarm

The back-up alarm kit alerts pedestrians when the Gator™ is operating in reverse:

  • Includes alarm, mounting brackets, wire harness, and reverse switch (if not already installed)
  • Conforms to SAE J994 performance specifications for a Type D alarm and is 89 dBA per the SAE specification (measured at 4 ft)

Bumper

Rear bumper kit (TH 6X4 shown)Rear bumper kit (TH 6X4 shown)

The rear bumper offers stylish, heavy-duty rear protection to the vehicle.

Compatible with:

  • Model year 2011 and later Gator™ XUV 625i, XUV 825, and XUV 855 Utility Vehicles
  • Model year 2010 and later Gator TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles
  • Model year 2018 and later Gator XUV835 and XUV865 Utility Vehicles

Cab Operator's Station

Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.

RAM X-Grip holderRAM X-Grip holder

For proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.

 

Simply remove the large wing nut from the assembly, insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.

Key benefits:

  • Patented RAM X-Grip™ holder fits most cell phones and similar devices including iPod®, iPad®, iPhone®, BlackBerry®, Samsung Galaxy® and others.
  • Mounts to the holes in the OPS
  • Ball joints allow for variable positioning
  • Holds firm even in rugged terrain
  • The holder is compatible with many other RAM® products with their B size or 25.4-mm (1-in.) ball accessories
RAM X-GripRAM X-Grip

The RAM X-Grip has a clean and clever four-leg design that sports great holding power without hiding the phone behind foam pads and plastic.

 

Features:

  • Rustproof
  • High-strength composite and stainless-steel construction
  • Spring-loaded holder expands and contracts for custom fit
    • Minimum width: 1.875 in. (47 mm)
    • Maximum width: 3.25 in. (82 mm)
    • Depth: 0.875 in. (22 mm)
  • Rubber-coated tips will hold device firm and stable
  • Easy access grip knobs for quick release of your device

 

Warranty:

90 days, limited.

 

RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM). Samsung Galaxy is a trademark of  Samsung Electronics Co.

Cargo Box

Cargo box pail holderCargo box pail holder
Cargo box pail holderCargo box pail holder

The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.

Cargo bed extenderCargo bed extender
Cargo bed extenderCargo bed extender

The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.

Deluxe cargo box bed matDeluxe cargo box bed mat

The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.

Cargo box divider located at rear of cargo bedCargo box divider located at rear of cargo bed
Cargo box divider located at front of cargo bedCargo box divider located at front of cargo bed
Speedrail lock in the unlocked postionSpeedrail lock in the unlocked postion
Speedrail lock in the locked postionSpeedrail lock in the locked postion

The Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.

Cargo box side extension kit Cargo box side extension kit
#

The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch. 

 

Product features include:

  • Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m3 (26 cu ft)
  • Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
    • Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
  • Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
  • Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
  • Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
  • Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
  • Compatible with Gator cabs and bedliner

 

NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.

Cargo box side extension kit (required, sold separately)Cargo box side extension kit (required, sold separately)
Cargo box side extensions coverCargo box side extensions cover
Tailgate down, side extension flipped upTailgate down, side extension flipped up
Key features
  • The cover closes off the top of the side extensions, ideal for hauling hunting dogs and small animals
  • Easily attaches to the side extension kit (required, sold separately)
  • Dimensions: 132-cm (52-in.) wide x 65-cm (25.5-in.) tall x 114-cm (45-in.) deep
Compatibility
  • Model year 2011 to current XUV625i, XUV825i/E/M, XUV825i/E/M S4, XUV855D/E/M, and XUV855D/E/M S4 Utility Vehicles
  • Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Model year 2018 to current HPX615 and HPX815 Utility Vehicles

Label kit for toolboxes (Green & Yellow) - BM26220

Rear fender flare kit on XUV865Rear fender flare kit on XUV865
Rear fender flare kitRear fender flare kit

A – Fender flare

B – Fender

 

The rear fender flare kit minimizes debris from reaching the operator station.

Product features include:

  • Two pliable fender flares (one for each side)
  • Hardware for mounting on the sides
  • Compatible with all model year 2011 to current Gator™ XUV825, XUV825 S4, XUV855, XUV855 S4, XUV835, and XUV865 Utility Vehicles
  • Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
  • Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles
Tool rackTool rack
Tool rack with toolsTool rack with tools

The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.

Tool rack holder detailTool rack holder detail
Adjusting the tool rack holder Adjusting the tool rack holder
Spare tire carrierSpare tire carrier
Spare tire carrierSpare tire carrier

Easily mount a spare tire to the side of the cargo box with this convenient kit.

 

Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.

Sportsman gear bag (closed)Sportsman gear bag (closed)
Sportsman gear bag (open)Sportsman gear bag (open)
Quick-connect latches on cargo boxQuick-connect latches on cargo box
Key features
  • Holds two firearms up to 1.3 m (51 in.) in length
  • Firearm support blocks can be removed to transport a wide array of gear
  • Bag easily attaches and detaches to cargo box with quick-connect latches for easy storage in the off season
  • Convenient carry straps
  • Made from waterproof, mildew- and abrasion-resistant material to keep gear dry
  • Oversized, corrosion-resistant zippers for durability and ease of use
  • Rain flap covers the zipper to prevent water infiltration
Compatibility
  • Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
  • Model year 2010 to current TX, TX Turf, TH, and TE Utility Vehicles
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information

Available through Order Zone

Cargo Box Lift

Shown in full up positionShown in full up position

The Gator™ XUV Series can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to these highly capable utility vehicles.

Key features
  • Capable of lifting a maximum vehicle cargo box load of 454 kg (1000 lb)
  • Lifts box to 49 degrees from horizontal for ease of service and cargo box load removal
  • Quick horizontal-to-49-degree time
  • Can be installed in minutes using the vehicle's prewired connectors and mounting points
  • Compact design fits nicely around the transmission and linkages, providing full protection
  • Fully sealed and weatherproof design does not require maintenance and is built for maximum durability
  • Overload protection protects against misuse
Compatibility
  • Model year 2018 to current XUV825 and XUV855 Utility Vehicles
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Cold Start Packages

Engine coolant heaterEngine coolant heater
Adapter partsAdapter parts

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.

Engine coolant heaterEngine coolant heater
Adapter partsAdapter parts

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.

Cover

Deluxe cargo box cover (shown in black)Deluxe cargo box cover (shown in black)
#

The deluxe cargo box cover easily installs without tools and keeps the cargo secure and protected from the elements. It is compatible with Gator Utility Vehicles equipped with the all-new deluxe cargo box.

Compatible with all model year 2011 - current Gator XUV 625i, XUV 825i, XUV 855D, TX, TX Turf, TH 6X4, TE, M-Gator™ A2, and M-Gator A3 Utility Vehicles.

Compatible with all model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles.

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Deluxe cargo box cover - Camo
Order number: LP19879

Vehicle storage coverVehicle storage cover
Vehicle storage coverVehicle storage cover
Key features
  • All-season protection against sun damage, rain, dust, and tree sap
  • Reinforced corners for added durability
  • Fabric coated for maximum water resistance and repellency
  • Elastic shock cord in bottom hem for a quick, custom fit

 

Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information

Available through Order Zone

Drawbar

48-mm (1-7/8-in.) hitch ball48-mm (1-7/8-in.) hitch ball

The 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

 

The ball hitch is available through Service Parts.

48-mm (1-7/8-in.) ball hitch shown48-mm (1-7/8-in.) ball hitch shown

The 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.

 

The ball hitch is available through Service Parts.

Drawbar

Drawbar kit for receiver hitchDrawbar kit for receiver hitch

Description:

  • Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
  • Steel construction has a 25-mm (1-in.) ball hole size
  • Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
  • Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
  • Compatible with HPX 615 and 815 Utility Vehicles
  • Compatible with XUV 620i and XUV 850D Utility Vehicles

NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.

Floor Mat

Left floor matLeft floor mat
Right floor matRight floor mat
Key features
  • Kit includes left and right floor mats
  • Made from 8-mm (5/16-in.) thick textured rubber
  • Tool-less install and easy removal for cleaning
  • Helps further dampen operator station noise
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Front Rack

Hood rackHood rack
Hood rack (hinged forward)Hood rack (hinged forward)
Key features
  • 124.5-cm (49-in.) long x 36-cm (14.25-in.) wide x 11-cm (4.25-in.) deep
  • Welded steel tubing
  • Design allows for convenient tie-down points to secure load
  • 45-kg (100-lb) capacity
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Requires brush guard to be installed
MOLLE device pouchMOLLE device pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Velcro flap closure
  • Padded to protect device and contents
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 6-in. (152.4-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Built-in drain hole
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE device pouchMOLLE device pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Velcro flap closure
  • Padded to protect device and contents
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 6-in. (152.4-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Built-in drain hole
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE fire extinguisher pouchMOLLE fire extinguisher pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Military-grade rapid extraction clips
  • Fits standard round 2.5-lb (1.1-kg) fire extinguishers
  • Padded to protect contents
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 6–in. (152.4-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE fire extinguisher pouchMOLLE fire extinguisher pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Military-grade rapid extraction clips
  • Fits standard round 2.5-lb (1.1-kg) fire extinguishers
  • Padded to protect contents
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 6–in. (152.7-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE large storage pouchMOLLE large storage pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Dual military-grade zippers and pulls
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 5–in. (127-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Built-in drain hole
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE large storage pouchMOLLE large storage pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Dual military-grade zippers and pulls
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 5–in. (127-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Built-in drain hole
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE small storage pouchMOLLE small storage pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Military-grade zippers and pulls
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 5–in. (127-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

MOLLE small storage pouchMOLLE small storage pouch

Available through OrderZone

 

Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel

 

Special features:

  • Military-grade zippers and pulls
  • Constructed with military-grade Cordura™ fabrics
  • Utilizes the MOLLE attachment system
  • Pair of 5–in. (127-mm) MOLLE sticks included
  • Available in black or REALTREE HARDWOODS HD™ pattern
  • Inner liner made of high-density coated pack-cloth nylon fabric
  • Limited 1-year warranty
  • Made In U.S.A.

 

Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.

Guards

Brush guard extensionsBrush guard extensions
Brush guard extensionsBrush guard extensions
Brush guard with extensions hinged forwardBrush guard with extensions hinged forward
Brush guard with extensionsBrush guard with extensions
Key features
  • Enhances the aggressive appearance of the vehicle
  • Easily attaches to the brush guard (required – sold separately)
  • Provides additional protection to the side hood and fender area without adding additional overall width to the vehicle
  • Still allows full entry under the hood when brush guard is hinged forward
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

CV Guards - Front & Rear - BUC10759

Front CV guardsFront CV guards
Rear CV guardsRear CV guards
Key features
  • Kit contains both front and rear CV guards
  • Additional added protection for the A-arms and CV joints
  • High-strength, formed steel guards handle impacts while maintaining a low, unsprung mass to provide exceptional ride quality
  • Easily bolts to the A-arms
  • Drainage holes on the bottom of the guards prevent buildup of dirt, grass, and other loose materials
Compatibility
  • Model year 2018 XUV835 and XUV865 Utility Vehicles
Cargo box fender guardsCargo box fender guards
Key features
  • Connects with rear bumper (required – sold separately)
  • Provides enhanced styling in addition to heavy-duty protection to the side of the cargo box
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Front fender guards - shown with brush guard (required) and brush guard extensions (optional)Front fender guards - shown with brush guard (required) and brush guard extensions (optional)
Key features
  • Easily attaches to the brush guard (required – sold separately)
  • Provides protection to the front fender area
    • NOTE: With fender guards installed, the overall width of the vehicle increases to 1.75 m (69 in.).

 

Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Rear CV Guards - BUC10605

Rear-panel glass protectorRear-panel glass protector
Key features
  • Provides protection to the cab rear-panel glass
    • NOTE: Never carry loads in the cargo box over the load guard.
  • Perforated, black metal screen easily attaches to the cab rear panel (required – sold separately)
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Harnesses

CAN Bridge Control Kit - BUC10316

Dash port harness connectionDash port harness connection
Dash port harness – lower connectorsDash port harness – lower connectors
Key features
  • The front attachment harness (dash port) includes connections for the following kits:
    • Rear sprayer
    • Rear spreader
    • Blades
    • GreenStar™ Display as part of the Ag Management Solutions (AMS) integration kit
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Hydraulic blade and rear winch harnessHydraulic blade and rear winch harness

Key features:

  • The hydraulic blade and winch harness includes connections for the following kits:
    • Hydraulic blade
    • Winch

 

Compatibility:

  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Horn

HornHorn
Horn switchHorn switch
Key features
  • Frequency: 410 Hz
  • Sound pressure level: 100+ dB(A)
  • Water-sealed type
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 Attachment harness required (see below) 
 E 1, 2
 M (open station) 2
 M (cab, factory installed) 2
 R ---

 

E-spec attachment harness 
2Front attachment harness
Roof attachments harness
Front cab harness 
Rear cab harness 
Dash port harness 

Lighting

Beacon light in up positionBeacon light in up position
Beacon light in down positionBeacon light in down position
Backlit beacon light switchBacklit beacon light switch
Key features
  • 76-mm (3-in.) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
  • Especially useful for working around properties and job sites
  • Acrylic amber lens resists scratching and scuffing
  • Impact-resistant nylon housing
  • Society of Automotive Engineers (SAE) J845 (Class 3)-compliant
  • UL® recognized
  • Flash rate: 60 +/- 10 fpm
  • Stands 21.3-cm (8.4-in.) tall from roof/occupant protective structure (OPS)
  • Folds down out the way when not in use
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 Attachment harness required (see below) 
 E 1, 3, 5
 M (open station) 3, 5
 M (cab, factory installed) 5
 R ---

 

E-spec attachment harness 
2Front attachment harness
Roof attachments harness
Front cab harness 
Rear cab harness 
Dash port harness 

 

UL is a trademark of UL LLC.

Front cab mountedFront cab mounted
Rear cab mountedRear cab mounted
Brush guard mountedBrush guard mounted
Key features
  • The LED driving lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
  • Beam pattern: driving (focused, intense beam of light good for illuminating a stretch of road directly in front of the vehicle)
Driving beam pattern – mounted on brush guardDriving beam pattern – mounted on brush guard
Driving beam pattern – mounted on OPS/roofDriving beam pattern – mounted on OPS/roof
  • Lamp sealing: IP69K
  • Light output (per light): 1150 lumens
  • LED color temperature: 5000 K
  • Amp draw (per light): 1.4 amps
  • 6 LEDs per light
  • Aluminum housing
Compatibility
  • Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
  • HPX Utility Vehicles
Front cab mountedFront cab mounted
Rear cab mountedRear cab mounted
Brush guard mountedBrush guard mounted
Key features
  • The LED work lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
  • Beam pattern: flood (spread of light over a wider, shorter distance)
Flood beam pattern – mounted on OPS/roofFlood beam pattern – mounted on OPS/roof
  • Lamp sealing: IP69K
  • Light output (per light): 1200 lumens
  • LED color temperature: 5000 K
  • Amp draw (per light): 1.4 amps
  • 6 LEDs per light
  • Aluminum housing
Compatibility
  • Model Year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
  • Model Year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Model Year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
  • HPX Utility Vehicles
Brake and taillight protectorBrake and taillight protector

The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.

Mirrors

Side mirrors – open stationSide mirrors – open station
Side mirrors – open stationSide mirrors – open station
Side mirrors – cab doorSide mirrors – cab door
Side mirrors – cab doorSide mirrors – cab door
Key features
  • Kit allows mirrors to be installed on either an open-station or cab vehicle
  • Mirrors can be easily adjusted based on operator preference
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Operator''s Station

Accessory mounting bracket (shown with tablet and cell phone mount)Accessory mounting bracket (shown with tablet and cell phone mount)
Key features
  • Allows the cell phone and tablet mount to be installed in the upper dash location
  • Required for cell phone mount if mounted in the lower dash location
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Tablet mount – upper mount location  (shown with cell phone mount – sold separately) Tablet mount – upper mount location (shown with cell phone mount – sold separately)
Tablet mount – lower mount location (shown with cell phone mount – sold separately)Tablet mount – lower mount location (shown with cell phone mount – sold separately)
Key features
  • Keeps tablet at the operator’s fingertips for doing jobs such as soil sampling
  • Utilizes a RAM® mount to easily move tablet to desired location
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles


RAM is a trademark of National Products, Inc.

Radio

Lower left speakerLower left speaker
Lower right speakerLower right speaker
Head unit (sold separately) installedHead unit (sold separately) installed
Key features
  • Kit includes:
    • Wiring harness
    • AM/FM antenna
    • Head unit mounting bracket
    • Two 13.3-cm (5.25-in.) speakers
  • Jensen® speakers
    • Waterproof
    • 45-W root mean square (RMS) power each
    • 135-W peak power each
  • The head unit is sold separately through Parts. The operator must choose one of the following three head units to complete the stereo:
    • SWJHD1130 – heavy-duty stereo with AM/FM, weatherband, and auxiliary input
    • SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM® satellite radio, and Bluetooth® wireless technology
    • SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth wireless technology

NOTE: Must order head unit through Parts.

Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

 

Jensen is a trademark of Electronics Trademark Holding Company LLC. SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc.

Upper speakersUpper speakers
SubwooferSubwoofer
Bluetooth® microphoneBluetooth® microphone
SiriusXM® Radio antenna/tunerSiriusXM® Radio antenna/tuner
Key features
  • Kit includes:
    • Wiring harnesses
    • SiriusXM® radio antenna/tuner (XM ready head unit required – sold separately)
    • Two 13.3-cm (5.25-in.) upper speakers
    • Subwoofer
    • Bluetooth® wireless microphone
  • Jensen® speakers
    • Waterproof
    • 45-W root mean square (RMS) power each
    • 135-W peak power each
  • Jensen subwoofer
    • Waterproof
    • 20.3-cm (8-in.) amplified subwoofer
    • Maximum power: 200 W
    • Aluminum mesh grille
    • Aluminum housing
  • The head unit is sold separately through Parts. The operator must choose one of the following two head units to complete the stereo:
    • SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM satellite radio, and Bluetooth technology
    • SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth technology

NOTE: Must order head unit through Parts.

Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Requires base radio kit

 

SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. Jensen is a trademark of Electronics Trademark Holding Company LLC.

Sprayers

Storage

Gator toolbox shown on TH 6x4 with deluxe cargo boxGator toolbox shown on TH 6x4 with deluxe cargo box
Gator toolbox - openGator toolbox - open

Quality constructed from 16 gauge steel, this industrial tool box is durable enough to handle wear and tear even from the toughest contractors. This tool box keeps tools, equipment, and other valuables secure, clean, dry, and protected from outside elements - due to full weather seal locks and a rust-resistant, powder-coat paint application. Twin commercial-grade gas shocks automatically lift lid for effortless one-handed open/close. Comes complete with key locks to guard against theft.

Product attributes:

  • Two lids hinged at the middle allows access from both sides of the vehicle
  • Extra-wide lid opening allows easy access to tools and valuables
  • Key locks guard against theft (two keys provided)
  • Compatible with Gator TX, TH, TE, XUV 625i, XUV 825i/E/M, XUV 825i/E/M S4, XUV 855D/E/M, and XUV 855D/E/M S4, XUV835E/M/R, XUV865E/M/R Utility Vehicles equipped with the deluxe cargo box as shown in the picture above
  • Also compatible with Model Year 2018 and newer HPX615 and HPX815

Ordering information
Please contact your local John Deere dealer for availability and pricing information.

Gator tool box
Order number: LP19886

Label kit for toolboxes (Camo) - BM26219

Label kit for toolboxes (Olive & Black) - BM26218

Side-door opening toolbox Side-door opening toolbox

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

 

Side-door opening toolbox features:

  • 125-L (33-gal.) sealed storage
  • Heavy-gauge sheet metal
  • D-rings for tie downs
  • Fully sealed lockable latch
  • Sealed door
  • Door can also be used as a work bench when down
  • Can be mounted on either side of the cargo box

 

Side-door opening toolbox

Toolbox weight

29 kg (64 lb)

Toolbox capacity

34 kg (75 lb)

Toolbox dimensions

-Full box: 109.4-cm (43.1-in.) long X 35-cm (13.8–in.) wide X 32.5-cm (12.8–in.) tall

-125-L (33-gal) total volume

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

 

The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:

  • BM26220 – green and yellow
  • BM26218 – olive and black
  • BM26219 – camo

This toolbox is compatible with the following Gator™ Utility Vehicle models:

  • TX
  • TX Turf
  • TE
  • TH
  • XUV625i
  • XUV825i/E/M
  • XUV825i/E/M S4
  • XUV855D/E/M
  • XUV855D/E/M S4
  • XUV835E/M/R
  • XUV865E/M/R
  • Model Year 2018 and newer HPX615 and HPX815
Tailgate with brake lights and taillightsTailgate with brake lights and taillights

This tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).

 

The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.

 

Optional label kits are designed to fit with this tailgate:

  • BM26220 – green and yellow
  • BM26218 – olive and black
  • BM26219 – camo

The tailgate is compatible with the following Gator™ utility vehicle models:

  • TX
  • TX Turf
  • TE
  • TH
  • XUV625i
  • XUV825i/E/M
  • XUV825i/E/M S4
  • XUV855D/E/M
  • XUV855D/E/M S4
  • XUV835E/M/R
  • XUV865E/M/R
  • Model Year 2018 - current HPX615 and HPX815
Top-door opening toolboxTop-door opening toolbox

This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.

 

Top door opening toolbox features:

  • 125-L (33-gal.) sealed storage
  • Heavy-gauge sheet metal
  • D-rings for tie downs
  • Fully sealed lockable latch
  • Sealed door
  • Toolbox divider
  • Removable tool tray
  • Can be mounted on either side of the cargo box

 

Top door opening toolbox

Toolbox weight

32.7 kg (72 lb)

Toolbox capacity

32.7 kg (75 lb)

Toolbox dimensions

-Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall

-125-L (33-gal.) total volume

The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.

 

The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:

  • BM26220 – green and yellow
  • BM26218 –olive and black
  • BM26219 – Camo

This toolbox is compatible with the following Gator™ Utility Vehicle models:

  • TX
  • TX Turf
  • TE
  • TH
  • XUV625i
  • XUV825i/E/M
  • XUV825i/E/M S4
  • XUV855D/E/M
  • XUV855D/E/M S4
  • XUV835E/M/R
  • XUV865E/M/R
  • Model year 2018 and newer HPX615 and HPX815

Turn Signals

Front turn signalsFront turn signals
Rear signal lights (taillight protectors not included)Rear signal lights (taillight protectors not included)
Hazards switch (top)Hazards switch (top)
Turn signal switch (right)Turn signal switch (right)
Key features
  • Kit includes:
    • Front/rear turn signals
    • Hazards
    • Backlit switches

NOTE: Not intended for use on public roadways.

Compatibility
  • Compatible with all model year 2011 to current Gator™ XUV825 and XUV825 S4 Utility Vehicles
    • Also requires turn signal light harness kit
  • Compatible with all model year 2011 to current Gator XUV625i, XUV855, and XUV855 S4 Utility Vehicles
    • Also requires turn signal light harness kit
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 Attachment harness required (see below) 
 M (open station) 2
 M (cab, factory installed) 2
 R ---

 

E-spec attachment harness 
2Front attachment harness
Roof attachments harness
Front cab harness 
Rear cab harness 
Dash port harness 

Winch

2041.2-kg (4500-lb) winch (chassis mounted)2041.2-kg (4500-lb) winch (chassis mounted)
Plug-in remotePlug-in remote
Key features
  • Impressive pulling capacity of 2041.2 kg (4500 lb)
  • Equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities
  • Includes a 3-m (10-ft), water-resistant, plug-in remote for safe distance operation that plugs directly into the glove box
  • 15 m (50 ft) of 5.6-mm (7/32-in.) synthetic rope with hawse fairlead. Synthetic rope does not develop sharp burrs like steel rope and does not store as much potential energy when under load.
  • Ergonomic clutch handle
  • Limited lifetime, 3-year electrical (North America) warranty offered through WARN
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • M-spec and R-spec vehicles come from the factory winch ready, and no additional attachment harnesses are required.
  • Requires winch mounting kit to mount the winch either on the chassis or on the front/rear receivers
Electrical harness requirements
XUV835/865 Attachment harness required (see below) 
 E 1

 

E-spec attachment harness 
2Front attachment harness
Roof attachments harness
Front cab harness 
Rear cab harness 
Dash port harness 

 

WARN is a trademark of WARN Industries, Inc.

Winch accessories kitWinch accessories kit

Double the pulling power, change the pulling direction, and keep the winch in proper working order.

The accessories kit is essential gear for operators getting the most out of their winch:

  • Effectively anchors to trees/boulders
  • Change the pulling direction
  • Double the pulling capacity

The accessories kit includes:

  • Flexible tree strap
  • Snatch block
  • Shackle

Each kit comes in a black Cordura® heavyweight-nylon soft case.

 

Cordura is a trademark of INVISTA.

Wireless winch remoteWireless winch remote
Wireless winch remote mounted on XUV835Wireless winch remote mounted on XUV835
Key features
  • Wirelessly control winch from up to 15 m (50 ft) away
  • Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
  • Colored light-emitting diode (LED) lights provide clear operator feedback
  • Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware
Compatibility
  • Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
  • Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles

Winch Mounting Kit

2041.2-kg (4500-lb) winch (chassis mounted)2041.2-kg (4500-lb) winch (chassis mounted)
Key features
  • Kit includes everything needed to mount the winch to the chassis
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Requires WARN ProVantage 2041.2-kg (4500-lb) winch (sold separately)

 

WARN is a trademark of WARN Industries, Inc.

2041.2-kg (4500-lb) winch (mounted on front receiver)2041.2-kg (4500-lb) winch (mounted on front receiver)
2041.2-kg (4500-lb) winch (mounted on rear receiver)2041.2-kg (4500-lb) winch (mounted on rear receiver)
Key features
  • Ability to mount the winch on the front or rear receiver
  • Kit includes everything needed to mount the winch to the receivers
Compatibility
  • Model year 2018 to current XUV835 and XUV865 Utility Vehicles
  • Requires WARN ProVantage 2041.2-kg (4500-lb) winch (sold separately)

 

WARN is a trademark of WARN Industries, Inc.

Reviews

3.25

4 reviews

Rating Snapshot

2
0
0
0
1
3
3
3.5

it cost way to much for what you caN DO

1/5

FOR $30,000 YOU WOULD THINK THEY COULD PUT A BIGGER BOX ON IT ALSO THE AIR FILTER DESIGN IS ABSOLUTELY POOR YOU CAN BUY A CAN AM OR ANY OTHER UTV AND GET TEN TIMES MORE

Pros

  • amazing cab

Cons

  • small cargo box
  • bad air filter design
  • price tag

BINGO

From: MONTANA

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

1
2
5

not what is expected of a $30,000.00 machine

2/5

i purchased this 835r three weeks ago and it came with tracks so far I have 21 miles on it and had to clean the air cleaner 3 times because it plugs up with snow I contacted JD and they know they have a problem with air filter system but have not done a thing about . they have numerous complains since May of 2018 and done nothing to fix the problem HOW ABOUT DESIGN A SNORKLE like you have for the 850,855, 860 modules. It is also a problem with dirt as I am told .

Pros

Cons

Buckhaven

From: montevideo MN.

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

2
2
5

Premium machine at a premium price

5/5

I use this machine for running around a small cattle ranch. The cab on this machine is impressive. The AC is fantastic; even at idle. During the hottest, most humid weather, you can cool the cab down to the low 60’s. The cab is pressurized so there is no dust from gravel roads that make it inside. The bench seat is a true 3 seater! The cab is very quiet—not like a car, but you have no trouble carrying on a conversation in a normal tone of voice. I have just about every option possible...rear window protector, mirrors, blinkers, horn, front and rear work lights (which are very bright), all the extra brush guards, and a wireless controlled winch. All of the accessories fit and work well. They do not have a factory kit for powering a sprayer or other rear mounted accessory though. That’s disappointing since it seems that it would be a common need. The wires are there in the harness though, so you could rig it up yourself. The little Yanmar diesel runs great, and I much prefer it over the more powerful gas model. If you need to go fast, the diesel model is not for you!

Pros

  • great hvac
  • reliable yanmar diesel
  • lots of storage
  • easy to get in and out of
  • very roomy cab
  • smooth ride even on rough terrain

Cons

  • expensive for level of build quality
  • maintenance is somewhat difficult
  • doors could have a better rain seal

Cattleboy

From: SE Minnesota

Length of Ownership: 3months

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5

Absolutely love my gator

5/5

I have had my gator for a week and absolutely love it it is like driving in a car I have put 40 miles on it so far the air conditioner and heater works excellent I am having the windows tinted Friday John Deere you did an excellent job

Pros

Cons

Bigdog

From:

Length of Ownership: 1week

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5