3032E
Compact Utility Tractor
- Standard four-wheel drive(4WD) for maximum traction
- Hydro transmission with Twin Touch™ pedals for ease of use
- Category 1 3-pt hitch compatible with dozens of implements
Maintenance Plans
Pricing excludes attachments
View Product Brochure
Specifications
Compare the specifications of up to 4 models
| Key Specs | 3032e Current Model |
|---|---|
| Engine power (gross) | 22.9 kW 31.2 hp |
| Power take-off (PTO) power | 18.6 kW 25 hp |
| Steering hydraulics | 15 L/min 4 gpm |
| Implement hydraulics | 20.2 L/min 5.3 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Optional |
| Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
| Wheelbase | 159.5 cm 62.8 in. |
| Engine | |
| Family | EYDXL1.64NDA FYDXL1.64NDA GYDXL1.64NDA |
| Manufacturer | Yanmar |
| Engine model | 3TNV88C-NJT |
| Engine power (gross) | 22.9 kW 31.2 hp |
| Power take-off (PTO) power | 18.6 kW 25 hp |
| Rated engine speed | 2500 rpm |
| Type | Diesel |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 87 Nm 64.2 lb-ft |
| Fuel tank capacity | 28.5 L 7.5 U.S. gal. |
| Electrical | |
| Battery size | 500 CCA |
| Alternator (12-V) | 55 amp |
| Starter size | 1.4 kW 1.9 hp |
| Fuel system | |
| Type | High pressure common rail direct injection |
| Fuel consumption | |
| Transmission | |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Optional transmission; forward/reverse | |
| Left-hand reverser | No |
| Transmission gear ranges | |
| Final drive | Bull Gear |
| Brakes | Wet disc |
| Steering | Power steering |
| Clutch, wet/dry | |
| Clutch disk diameter wet clutch | |
| Axle capacity | Front 798 kg 1760 lb Rear 1197 kg 2640 lb |
| Creeper | No |
| Cruise control | Optional |
| Differential lock | Yes |
| Drawbar maximum vertical load | |
| Hydraulics | |
| Type | Open center |
| Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Pump type | Dual gear |
| Maximum operating pressure | 172.4 bar 2500 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to two (optional) |
| 3-point hitch | |
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615.1 kg 1356 lb |
| Power take-off (PTO) | |
| Standard | 540 rpm at 2500 rpm |
| Optional | |
| Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Engagement method | |
| Fluid capacities | |
| Crankcase with filter | 4.5 L 4.8 qt |
| Transmission and hydraulic system | |
| Final drive | |
| Type | Bull Gear |
| Differential lock | |
| Operator station | |
| Rollover protective structure | Type Foldable ASABE S478 |
| Platform - flat/straddle | Semi-flat |
| Gear shift location - console/floor | Left-hand side |
| Cab | |
| Compliance | |
| Visibility | |
| Air conditioning, temperature differential | |
| Doors | |
| Noise rating | |
| Seat equipment | |
| Dimensions | |
| Wheelbase | 159.5 cm 62.8 in. |
| Front axle clearance | 36.3 cm 14.3 in. |
| Turning radius with brakes | |
| Turning radius without brakes | 2.9 m 9.4 ft |
| Limited slip differential | |
| Approximate shipping weight (open-station; cab) | 1007.9 kg 2222 lb |
| Tires | |
| Front | Farm - 7-14 Turf - 27x8.5-15 R4 - 25x8.5-14 R4 - 27x8.5-15 |
| Rear | Farm - 11.2-24 Turf - 41x14-20 R4 - 15-19.5 R4 - 43x16-20 |
| Front tread range | |
| Rear tread spacing | |
| Miscellaneous | |
| Toolbox | |
| Tilt steering wheel | |
| 12-V Outlet |