×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

2032R

Compact Tractor

  • Compatible with the 60D and 72D AutoConnect™ drive-over mower decks
  • Standard 4WD, cruise control, folding ROPS
  • iMatch™ compatible
  • See Ways To Save
$ 23,910.00 MSRP
Apply For FinancingBuy OnlineMaintenance Plans

Pricing excludes attachments


View Product Brochure



Features



Yanmar 3-cylinder, TNV series diesel engine Yanmar 3-cylinder, TNV series diesel engine

2032R

The 1.642-L (100.2-cu in.) displacement, liquid-cooled 3TNV88C-NJT Yanmar® diesel engine provides 22.9 kW ( 30.7 hp) to the 2032R.

 

 Model

Number of cylinders

Engine displacement

 Aspiration

Gross engine power*

Gross engine PS*

Power take-off (PTO) power*

2032R

3

1.642 L (110.2 cu in.)

Natural 

22.9 kW (30.7 hp)

31.2 PS

18 kW (24.2 hp)

 

*Engine kW (hp), gross SAE J1995:  22.9 (30.7) at 2500 rpm, PS

Displacement, L (cu in).: 1.642 (100.2)

2038R

The 1.568-L (95.8-cu in.) displacement, turbocharged liquid-cooled 3TNV86T-NJT Yanmar diesel engine provides 27.4 kW ( 36.7 hp) to the 2038R.

 

 Model

Number of cylinders

Engine displacement

 Aspiration

Gross engine power*

Gross engine PS*

PTO power*

2038R

3

1.568 L (95.8 cu in.)

Turbocharged

27.4 kW (36.7 hp)

37.2 PS

22.7 kW (30.4 hp)

 

*Engine kW (hp), gross SAE J1995: 27.4 (36.7) at 2500 rpm, PS

Displacement, L (cu in.): 1.568 (95.8)

 

The engine uses the latest technologies to optimize fuel economy, improve control and accuracy, and reduce environmental impact.

 

The common rail system (CRS) optimizes fuel economy and reduces operating costs. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and a lower cost of operation.

 

The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.

 

The engine comes with an aftertreatment system.  The system operates automatically. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed or load factor, an active cleaning cycle is initiated.  In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC).

 

After many hours of use, the exhaust filter may require an ash removal service.

DOC/DPF
#

Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:

  • A prescribed time-based estimation of needed filter cleaning
  • DOC/DPF pressure sensors
  • A particulate matter buildup estimation based on load conditions

 

Once one of the three conditions have been met, filter cleaning will occur. There are three different types of filter cleaning processes:

  • Passive filter cleaning
  • Active filter cleaning
  • Parked filter cleaning
Passive filter cleaning

Passive filter cleaning occurs naturally when the engine is generating enough heat to oxidize particulate matter. This automatic process occurs continuously during normal operating conditions. No tractor icons or symbols appear on the display during passive filter cleaning.

 

NOTE: Passive filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

Active filter cleaning

If conditions (temperature, load, or speed) for passive filter cleaning cannot be achieved, then particulate matter is removed using active filter cleaner.

 

To achieve the required conditions, exhaust temperature management (ETM) manages the initiation and duration of active filter cleaning. ETM can adjust numerous engine parameters and/or inject a small quantity of fuel into the exhaust stream for a short duration. The fuel turns to vapor and chemically reacts with the catalysts in the DOC to create heat to oxidize particulate matter.

 

It is important to note that at no time is fuel in the DOC/DPF ignited, and there is no interruption to tractor operation.

 

Like passive filter cleaning, active filter cleaning requires no operator involvement, and there is no interruption to tractor operation.

Parked filter cleaning

In some instances where passive and active filter cleaning have not fully cleaned the particulate matter from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process.

 

The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operator’s manual for more details.

 

The emissions system on this engine constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.

 

NOTE: Number of hours since last regeneration and soot level percentage viewable on LCD display.

 

For more information regarding Environmental Protection Agency (EPA) regulations and the technology behind John Deere Integrated Emissions Control systems, click here.

Yanmar TNV Series engine offers these features:

  • Economical cast-in-block cylinder design for good cooling and long life
  • Direct fuel injection
    • Improves starting
    • Injects fuel directly on top of pistons for more efficient combustion
    • Develops more horsepower per gallon of fuel than indirect injection engines
  • Aluminum alloy pistons are lightweight to reduce connecting rod bearing loads and provide good heat transfer characteristics
    • Design permits tighter tolerances and neutralizes expansion of the piston, which reduces blow-by and noise from piston slap
    • Top rings are higher on the piston and a thinner head gasket is used to greatly reduce the volume of unburned waste gases and increase combustion efficiency
  • Timing gears and injector drive gears have a helical profile to reduce engine noise
  • Auto-bleed fuel system
    • There is no need to prime the system if the tractor runs out of fuel
    • The system self-primes the injection pump, lines and injectors, providing fast fuel recovery for easier starting
  • High-capacity lubrication system provides filtered oil, under pressure, to all engine bearings for long life 
  • Fuel filter with replaceable element
  • Water separator with additional replaceable filter element
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Dry-type air cleaner with safety element
    • Dual element design for added engine protection
    • Air cleaner service indicator is standard equipment on all models and alerts the operator on the instrument panels
  • Easy access to engine check and fill points on the right-hand side of the tractor by removing the side panels 

 

Yanmar is a trademark of Yanmar Co., Ltd.

The 2032R and 2038R Tractors are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.

  • No clutching for fast and easy direction changes
  • Twin Touch™ foot pedals for quick and easy forward/reverse operation
  • Transmission oil cooler cools transmission oil for longer transmission life

 

Safety features of the HST transmission include:

  • The tractor will only start with the range lever in neutral
    • If the range lever is in gear when the key is turned to the start position, the instrument panel instructs the operator to shift to neutral
  • The engine will shut off if the operator leaves the seat and the power take-off (PTO) is engaged
Twin Touch foot controls
Twin Touch foot controls Twin Touch foot controls

Key John Deere advantages – John Deere’s Twin Touch foot controls offer several key advantages over competitive HST models tractors.

  • Some competitive hydrostatic tractors use a treadle pedal (toe-heel) design foot control for operation of the HST
    • Requires the operator to use both toe and heel to change direction, resulting in increased operator fatigue
    • The Twin Touch configuration also makes it easier to inch the tractor forward or rearward (i.e., when attaching to implements)
Integrated hydrostatic pump and motor
  • Sauer-Danfoss® manufacturer provides the integrated pump and motor; this assures that the components are matched to each other, providing maximum efficiency
  • Provides strength and durability needed for operating such attachments as loaders and backhoes
  • One reservoir (with one check-point and fill point) for the transmission, differential, and hydraulic system speeds up daily maintenance
  • Mechanically actuated by Twin Touch foot pedals allow the operator to select both directions of travel and speed with the touch of a toe
Cruise control

An electronic cruise control is standard equipment on the 2032R and 2038R Tractors. Cruise control is electronically engaged and disengaged using a toggle switch located on the right-hand console.

  • Maintains desired forward speed without having to touch the forward pedal
  • To disengage the cruise control, either apply pressure to the brake pedal or disengage the cruise control switch

Sauer-Danfoss is a trademark of Sauer-Danfoss Incorporated.

Operator Station Operator Station

The operator station has been designed to allow for greater operator comfort and increased visibility. The ergonomic layout and convenient color coded controls allow for easy identification and operation. The design of the operator station allows operators to sit “in” as opposed to “on” which provides comfort and increased stability.

 

Below are other key features of the 2032R and 2038R Tractor operator’s station:

  • Sloping hood design provides improved visibility
  • Plenty of room for comfortable operation
  • Cup holder, multiple storage compartments and a 12V outlet ensures an organized operator station
  • Rubberized floor mat design to reduce vibration and noise
  • Step-through operator platform makes getting on and off the tractor easy
  • Fender-mounted handrails, large and easy to grab, assist the operator when getting on and off the tractor
  • Controls have been raised and integrated into the fender for operator comfort and ease of use
  • Large, easy to read decals provide clear instructions for experienced and even non experienced operators
  • Front horizontal exhaust for increased operator visibility
  • If the operator leaves the tractor seat when the transmission, mid PTO, or rear PTO is engaged, the engine will shut down
    • For applications where out-of-seat PTO operation is required, the following criteria must be met: transmission in neutral, park brake engaged, and PTO selector set to rear only. See operator's manual for specific instructions.
  • Specially designed panels route hot air flow from the engine compartment under the tractor instead of directly onto the operator
Left-side step
Left-side entrance step Left-side entrance step
  • The left-side step allows for easy access on and off the tractor
  • Foot platform has a non-skid surface
Premium seat
Premium high-back seat Premium high-back seat

The thick, soft padding on this seat provides a smooth and comfortable ride. A high, scalloped back makes it easier for the operator to turn to view rear implements.

  • Seat adjusts fore/aft for operator convenience
  • Seat flips forward for protection from the elements
  • High seat back and armrests are in base equipment and allow for a more comfortable operation
  • Retractable seat belt feature prevents the seat belt from becoming tangled in the seat suspension and controls

 

Key features of the operator’s station include:

  • Tilt steering wheel design in base equipment on the 2032R and 2038R Tractors
    • Allows the operator to adjust the steering wheel to the most comfortable position
    • Provides additional clearance for the operator to enter and exit the tractor
    • Provides easy return to the fully raised position
    • Provides plenty of room for comfortable operation
Tilt steering lever Tilt steering lever
  • Easy-fold ROPS allows tractor to be used or stored in low clearance environments
iMatch Quick-Hitch (LVB25976) iMatch Quick-Hitch (LVB25976)

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
    • Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
  • Lower bushings
    • Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
Instrument panel Instrument panel
CommandCut™ controls CommandCut™ controls

The 2032R and 2038R tractors features the CommandCut™ mower deck lift system, which allows quick and accurate adjustments of the mower deck with the turn of a dial and the bump of a lever. Control callouts make operation simple and repeatable. The height of cut setting dial and raise/lower lever are conveniently located on the right-hand console and easily accessible by the operator. Some of the key benefits of this system are:

  • Installing CommandCut™ only requires a simple calibration after installation. It is a true “plug-and-play” system as no controller programming is required.
  • Inhibits PTO operation when mower deck is in the install position to prevent PTO driveling and mower deck blade damage
  • Eliminates the need for hydraulic power and components, thus dedicating all hydraulic capacity to other implements or tract functions
    • Fewer hydraulic components means fewer hydraulic leaks, especially when working on sensitive turf
  • Precise height of cut with no drift or leakdown
    • System can be calibrated to different tire sizes to maintain precision
  • Minimum effort required to set height of cut and to raise/lower the mower deck which reduces operator fatigue
  • Easy to read graphical interface on the instrument panel allows operator to glance at the desired height of cut while staying focused on mowing
  • Built in transport lock can be activated from the seat by turning the height of cut dial to position 6 and raising the deck to the highest position 

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with the John Deere-exclusive ServiceADVISOR™ system.

 

  • Four quarter turn fasteners allow operators to easily remove the engine side panels without tools to access to the engine compartment.
Quarter turn fasteners Quarter turn fasteners
Right tractor side panel removed Right tractor side panel removed
  • Easy access to regular service points minimizes service time
  • Daily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panels
  • Tractors are equipped with an electronic air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changed
Air filter restriction sensor Air filter restriction sensor
  • Daily service requirements are minimal and simple to accomplish. Most service interval requirements can be performed with a basic understanding of procedures and common tools.
  • All external engine, fuel and transmission filters are easily accessible
  • Increased service intervals lessen overall cost of ownership
  • Hydraulic oil service interval increased to 1200 hours when using Hy-Gard™ products
  • Hydraulic oil filter will need to be changed every 400 hours
  • Fuel tank is located on the rear of the tractor to allow for easy access when fueling
Fuel Tank Fuel Tank
  • Gas-lift hood support eliminates the need for a mechanical prop rod
Gas-lift hood shocks Gas-lift hood shocks

All items in the daily service schedule can be performed without the use of tools:

  • Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessed
  • The engine can be easily accessed by simply raising the hood for more periodic maintenance checks

 

NOTE:  Always refer to the operator’s manual for complete maintenance and service recommendations.

Specifications


Compare the specifications of up to 4 models

Key Specs 2032r
Current Model
Engine power (gross)23.3 kW
31.2 hp
SAE J1995 rated power
Power take-off (PTO) power18 kW
24.2 hp
Steering hydraulics15 L/min
4 gpm
Implement hydraulics20.2 L/min
5.3 gpm
Hitch typeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb
Standard transmission; forward/reverseHydrostatic transmission (HST)
Cruise controlStandard
Approximate shipping weight (open-station; cab)1105 kg
2436 lb
Wheelbase172.5 cm
67.9 in.
Engine
FamilyGYDXL1.64NDA
ManufacturerYanmar
Engine model3TNV88C-NJT
Engine power (gross)23.3 kW
31.2 hp
SAE J1995 rated power
Power take-off (PTO) power18 kW
24.2 hp
Rated engine speed2500 rpm
TypeDirect Injection
Injection pump typeDirect Injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacement3 / 1.642 L
3 / 100.2 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke88x90 mm
3.46x3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed86 Nm
63.4 lb-ft
Fuel tank capacity32 L
8.5 U.S. gal.
Electrical
Battery size500 CCA
Alternator (12-V)85 amp
Starter size1.4 kW
1.9 hp
Fuel system
TypeDirect Injection
Fuel consumption
Transmission
Standard transmission; forward/reverseHydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges
Final driveBull Gear
BrakesWet disc
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
880 kg
1940 lb
Rear
1089 kg
2400 lb
CreeperNo
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load
Hydraulics
TypeOpen center
Pump rated outputSteering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump typeGear
Maximum operating pressure172.37 bar
2500 psi
Draft control sensingPosition control
Remote control valves availableUp to three
3-point hitch
TypeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb
Power take-off (PTO)
StandardRear - 540 rpm
Mid - 2000 rpm
Optional
ControlIndependent
ClutchIndependent
Brake (for mid and rear PTO)Wet disc
Engagement method
Fluid capacities
Crankcase with filter4.5 L
4.8 qt
Transmission and hydraulic system
Final drive
TypeSpur Gear
Differential lockYes
Operator station
Rollover protective structureType
Foldable
ASABE S478
Platform - flat/straddleFlat
Gear shift location - console/floorLeft-hand side
Cab
Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment
Dimensions
Height
Wheelbase172.5 cm
67.9 in.
Front axle clearance
Turning radius with brakes2.75 m
9.02 ft
Turning radius without brakes3 m
9.84 ft
Limited slip differential
Approximate shipping weight (open-station; cab)1105 kg
2436 lb
Tires
FrontR1 Ag 7.00-12
R3 Turf 23x8.50-14
R4 Industrial 23x8.50-14
R3 Turf Radial 200/60 R15
RearR1 Ag 12.4-16
R3 Turf 14-17.5
R4 Industrial 14-17.5
R3 Turf Radial 300/70 R20
Front tread range
Rear tread spacing
Miscellaneous
ToolboxYes
Tilt steering wheelYes
12-V OutletYes

Offers and Discounts

Save $2501

on New John Deere Sub-Compact & Compact Tractors

  • Save $250¹ with the purchase of 2 or more John Deere or Frontier implements on all New Sub‑Compact & Compact Tractors
  • Offer available 02 February 2021 through 03 May 2021
Studio image of 2038R Compact Utility Tractors

Save $2,0001 with cash purchase

on New John Deere 2032R and 2038R Compact Tractors

  • Save $2,0001 on the cash purchase of a 2032R or 2038R
  • Offers available 02 February 2021 through 03 May 2021

Save $250 with the purchase of two or more Implements ‑

Click for details
Studio image of 2032R Compact Utility Tractor

0% APR fixed rate for 60 months1

on New John Deere 2032R Compact Tractors

  • 0% APR fixed rate for 60 months1 OR
  • .90% APR fixed rate for 72 months2
  • AND

  • Save $1,5003
  • Offers available 02 February 2021 through 03 May 2021

Save an additional $250 with the purchase of two or more Implements ‑

Click for details

1Offer valid for $250 off all New John Deere Sub-Compact and Compact Tractors when purchased with two or more John Deere or Frontier Implements purchased from an authorized John Deere dealer between 02 February 2021 to 03 May 2021. Each implement must have a minimum List Price of $350. Prices and models may vary by dealer. This can be combined with the regular installment options. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Offer is available only on New John Deere Sub-Compact and Compact Utility Tractors only at participating United States dealers. Prices and savings are in U.S. dollars.

1Offer available on qualifying purchases made between 02 February 2021 to 03 May 2021. Prices and models may vary by dealer. Save $2,000 USD on 2032R & 2038R Compact Tractors only. This cannot be combined with the regular installment options. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Some restrictions apply. See participating dealer for details and other financing options. Offer is available only at participating United States dealers. Prices and savings are in U.S. dollars.

1Offer valid on qualifying purchases made between 02 February 2021 to 03 May 2021. Subject to approved installment credit with John Deere Financial. No down payment required. $16.67 per month for every $1,000 financed. 0% APR for 60 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or in John Deere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

2Offer valid on qualifying purchases made between 02 February 2021 to 03 May 2021. Subject to approved installment credit with John Deere Financial. No down payment required. $14.27 per month for every $1,000 financed. .90% APR for 72 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or in John Deere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

3Offer available on qualifying purchases made between 02 February 2021 to 03 May 2021. Prices and models may vary by dealer. Save $1,500 USD on 2032R only. This can only be combined with the regular installment options. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Some restrictions apply. See participating dealer for details and other financing options. Offer is available only at participating United States dealers. Prices and savings are in U.S. dollars.

Accessories and Attachments

Ballast

Ballast box shown with extensionBallast box shown with extension

The ballast box can be used to carry additional ballast for greater tractor stability.


A 9-in. high extension can be added to ballast box for even greater capacity.


A bushing kit is required for the ballast box to be used with the iMatch™ Quick Hitch.

Ballast box with extensionBallast box with extension

The ballast box can be used to carry additional ballast for greater tractor stability.

 

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

 

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

 

The ballast box extension is only available through Parts; it is not a factory option.

Drawbar

Magnetic hitch pinMagnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Safety chain supportSafety chain support
  • Provides necessary tractor parts to accept implement safety chains
  • Attaches to tractor drawbar ahead of hitch pin
  • Order safety chain from implement section

Engine

Engine coolant heater kitEngine coolant heater kit

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts.

 

NOTE: It is recommended to install optional engine coolant heater, transmission oil heater, and battery heating pad (A22400P - ordered through A and I) if operating machine in temperatures below -18 ⁰C (0⁰F).

Front Fenders

Rear fender extensionRear fender extension

Optional rear fender extensions are available to provide additional tire coverage and to protect the operator station from mud and debris.

Turnable Front Fender Kit - BLV10999

Front Power Take-off (Pto)

Front 3-point hitch with A-frame adapter (3020 Series Tractor shown)Front 3-point hitch with A-frame adapter (3020 Series Tractor shown)

This hitch can be ordered as an option code within the given implements with which it is compatible (59 Snow Blower, 366 Front Blade, or 60 Front Broom), or it can be ordered as an attachment for field conversion. If the operator already has the hitch, the other implements will need to be ordered with the less hitch code so a second hitch is not ordered.

Front Quick-hitch

A-Frame Quick Attach System (3120-3720, 3033R-3046R, model year 2017- 2032R, 2036R, and 2038R tractors) - BLV10637

Auxiliary front hydraulic coupler kit (model year 2017- 2032R, 2036R, and 2038R tractors) - BLV10634

Front Three-Point Hitch (model year 2017- 2032R, 2036R, and 2038R tractors) - BLV10631

Hydraulic accumulator kit for Front Three-Point Hitch (model year 2017- 2032R, 2036R, and 2038R tractors) - BLV10638

Front Weights

Front-weight bracket-extension kitFront-weight bracket-extension kit

Allows the operator to hang up to 10 weights on the tractor and retain them securely. This kit helps maintain stability when using rear 3-point hitch implements and a loader is not installed on the tractor. Proper ballast is essential for safety and to ensure the durability of the tractor components.

Quik-Tatch Weight, 70 lb (32 kg) - LVU32113

Front Wheels And Tires

200/60 R15 (R3 Turf, 1 Position) Radial - Front Wheels & Tires - BLV10601

23x8.50-14 (4PR, R3 Turf, 1 Position) Bias Ply - Front Wheels & Tires - BLV10598

23x8.50-14 (4PR, R4 Industrial, 1 Position) Bias Ply - Front Wheels & Tires - BLV10600

7.00-12 (4PR, R1 Ag, 1 Position) Bias Ply - Front Wheels & Tires - BLV10596

Hydraulics

Two additional kits can be added as dealer-installed options:

  • Dual rear selective control valves (SCVs)
  • Power beyond
Dual-rear SCV
#
  • Includes hydraulic valve, four rear-mounted couplers, two control levers, continuous flow control switch, and hydraulic lines
  • The dual-rear SCV kit includes a continuous flow feature for operating hydraulic motors or implements that have a separate hydraulic control valve such as a log splitter.
    • Oil temperature is monitored during continuous flow operation. If temperature exceeds the sensor threshold, the system will discontinue continuous flow operation.
  • 1.3-cm (1/2-in.) quick-couplers allow for more hydraulic flow and easy install/removal
Power beyond
#
  • Includes rear-mounted couplers and a hydraulic hose loop that allows access to a dedicated pressurized oil port and a dedicated return to tank port at the rear of the tractor. This kit is required for backhoe operation.
  • 1.3-cm (1/2-in.) quick-couplers allow for more hydraulic flow and easy install/removal

Two additional kits can be added as dealer-installed options:

  • Dual rear selective control valves (SCVs)
  • Power beyond
Dual-rear SCV
#
  • Includes hydraulic valve, four rear-mounted couplers, two control levers, continuous flow control switch, and hydraulic lines
  • The dual-rear SCV kit includes a continuous flow feature for operating hydraulic motors or implements that have a separate hydraulic control valve such as a log splitter.
    • Oil temperature is monitored during continuous flow operation. If temperature exceeds the sensor threshold, the system will discontinue continuous flow operation.
  • 1.3-cm (1/2-in.) quick-couplers allow for more hydraulic flow and easy install/removal
Power beyond
#
  • Includes rear-mounted couplers and a hydraulic hose loop that allows access to a dedicated pressurized oil port and a dedicated return to tank port at the rear of the tractor. This kit is required for backhoe operation.
  • 1.3-cm (1/2-in.) quick-couplers allow for more hydraulic flow and easy install/removal

Lighting

Rear work lightRear work light

This kit provides light to the rear of the tractor for evening work.

 

For open-station tractors only, this kit contains individual light.

 

Allow 30 minutes to install.

 

NOTE: Kit includes one rear light.

NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.

NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.

#

The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.

 

NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).

 

NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).

 

NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).

#
#

 Rollover protective structure (ROPS) mounted LED work lights

An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.

This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
  
The halogen work light kit attachment is still available (LVB25546).

#
#
#

An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:

  • Two light-emitting diode (LED) fender lights
  • Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
  • One LED rear PTO light

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

Two guards are included in each kit and are for open-operator station (OOS) tractors only.

#
#
#

An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:

  • Two light-emitting diode (LED) fender lights
  • Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
  • One LED rear PTO light

Miscellaneous

Rear License Plate Kit (Includes Light) - BLV10677

Provide added traction in snowy and icy conditions.

Tractor Cover - LP95637

#

The optional wheel spacers extend the rear tread setting by 60 mm (2.4 in.) on each side, further increasing stability, operator confidence and overall productivity. The maximum overall width of the tractor with optional wheel spacers is 1520 mm (59.8 in.).

Open Operator's Station

Standard canopyStandard canopy
Deluxe canopyDeluxe canopy

The canopy attaches to the open operator station rollover protective structure (ROPS).
The 1613.2-mm (63.5-in.) long, 1322.7-mm (52-in.) wide ABS canopy  can offer protection to the operator from inclement weather and direct overhead sunlight.

 

NOTE: Additional mounting brackets are required to adapt the canopy (LVB25334) to ROPS. See ordering information below.

 

NOTE: Deluxe canopy (LVB25785) includes additional headliner and marker lights for select open station models and also requires LVB25332.

Standard canopyStandard canopy
Deluxe canopyDeluxe canopy

The canopy attaches to the open operator station rollover protective structure (ROPS).
The 1613.2-mm (63.5-in.) long, 1322.7-mm (52-in.) wide ABS canopy  can offer protection to the operator from inclement weather and direct overhead sunlight.

 

NOTE: Additional mounting brackets are required to adapt the canopy (LVB25334) to ROPS. See ordering information below.

 

NOTE: Deluxe canopy (LVB25785) includes additional headliner and marker lights for select open station models and also requires LVB25332.

UmbrellaUmbrella

Provides the operator the necessary shade and protection from the elements.

  • Attaches to the tractor's rollover protective structure (ROPS)
  • For open-station tractors only

Power Take-off (Pto)

Rear Wheel Weights

Rear wheel weightRear wheel weight
  • Provide additional traction and stability
  • Starter and additional weight for 15-in. wheel, 16.5-in. wheel, 17.5-in. wheel, and 19.5-in. wheel
  • Up to three weights per wheel can be added

Rear Wheels And Tires

12.4-16 (6PR, R1 Ag, 1 Position) Bias Ply - Rear Wheels & Tires - BLV10595

14-17.5 (4PR, R3 Turf, 1 Position) Bias Ply - Rear Wheels & Tires - BLV10597

14-17.5 (4PR, R4 Industrial, 1 Position) Bias Ply - Rear Wheels & Tires - BLV10599

300/70 R20 (R3 Turf, 1 Position) Radial - Rear Wheels & Tires - BLV10602

Three-point Hitch

3-Point Hitch Tractor Receiver Hitch - LP25001

iMatch Quick Hitch Bushings - LVU12858

iMatch Quick Hitch Bushings - LVU15507

iMatch Bushing Kit - LP19969

iMatch Bushing Kit - LP25004

iMatch Quick Hitch Upper Adapter Bushing - PM00353

iMatch Quick Hitch Upper Adapter Bushing - PM03008

iMatch Quick-Hitch (LVB25255)iMatch Quick-Hitch (LVB25255)
iMatch Quick-Hitch with rotary cutter hookup (LVB25255)iMatch Quick-Hitch with rotary cutter hookup (LVB25255)
iMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest customer concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

 

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

 

NOTE: In the picture above, you see the bushing set. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 0.76-0.77 in.
    • Outside diameter: 1.24-1.25 in.
  • Lower bushings
    • Inside diameter: 0.88 to 0.89 in.
    • Outside diameter: 1.43 to 1.44 in.
iMatch quick-coupler bushing kitiMatch quick-coupler bushing kit

This bushing kit is for use with Category 1 implements (ballast box) to make them function correctly with the iMatch Quick-Hitch.

Transmission

Weights

WeightWeight

The 42-lb (19-kg) Quik-Tatch weight can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.

 

Weights are constructed of cast iron and weigh approximately 42 lb (19 kg) each.

Reviews

4.23

30 reviews

Rating Snapshot

17
6
5
5
1
4.1
4.3
4.63

Extremely capable tractor suitable for serious use

5/5

After a lot of research and talking to individuals with small acreages to contractors that use small tractors for landscaping work, I purchased a 2020 JD 2032R. Every guy that makes a living with small tractors recommended buying a John Deere if I could afford it. When I got a price for a comparable Kubota (not a stripped down Kubota), the JD 2032R was $50 more than the lowest JD dealer. JD dealers do vary a lot in price so shop around. The layout of the controls and the features built into the JD reflect a lot of refinement over older JD tractors and everything else on market. The FEL and mower detachment/attachment are amazingly well designed features. I immediate put my tractor into heavy use and over loaded the 220 FEL moving pallets of bricks. The 2032 repeatedly picked up in excess of its rated capacity and my contractor told me his orange tractor is lucky to lift 80% of its rating. The rest of the experience with the unit has been the same. Performing better than I expected. Mowing with the electric 60" deck is a premium experience and the tractor did not even notice running a 60" tiller through sod. Of special note, the emission regen system works perfectly and this is not a small matter. Many tractors with orange paint are failing to regenerate and spending a lot of time at the dealership rather than working for the owner. With the Deere, you just use it and the harder you work it, the better. The tractor takes care of the rest. The only real negative is this tractor is heavy and it leaves prints in my house yard after a good rain. I did buy a small rider for around the house to keep my wife happy. For mowing large areas, the 2032R is excellent. One caution is do not let your wife use it. My wife thinks its her tractor now.

Pros

  • serious equipment that exceeds its ratings
  • easy to use fel and mower deck
  • well laid out controls
  • emission regen works without intervention
  • easy to operate

Cons

  • heavy for mowing on wet ground

DLBERRYFARM

From: wisconsin

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

John DEERE 2032R all round is great

4/5

New to using tractors I Like this one cause of the ergonomics paid all cash for it and all attachments. 33k I believe. Human error on using imatch and bushings I didn’t need. Just great all round Just need a grapple. I went with John Deere attachments cause I just wanted to make sure it fits. They are a bit over priced but John Deere service is the greatest. On explanation and repairing etc. It took them forever to get some of my attachments during lock down of 2020 coronavirus. But got them all. Still learning all the ins and out but I love it. I match was a bit tricky but I think I had wrong bushings

Pros

  • best trac all around

Cons

  • the manuals are a bit difficult for beginners

CozIII

From: Ok

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Beginner

4
2
5

2016 2032R

5/5

I got a 2032R 4 years ago and it is going strong, not a single problem yet. I have about 150 hrs on it, and it is a fantastic piece of equipment to have around our home (9 acre property).

Pros

Cons

Edmondson

From: Jefferson, mD

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Beginner

4
2
5

Piece of crap

1/5

After 150 hours of use and 20 hours of PTO use the instrument panel needs to be replaced. It will only work intermittently. It stops for no apparent reason. After researching the problem I found that it seems to be a common thing. Buy anything but a John Deere. They no longer make a quality tractor.

Pros

Cons

  • poor quality

TOMe

From: Nj

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Expert

1
2
5

broke after 60 hours :(

3/5

I've owned this tractor new for 4 years and it has always been kept in a nice clean shop. It has 60 hours and have already had to replace the instrument panel due to the PTO kicking out after being on for 20 seconds, I've always been a big JD fan. I believe after this I'll probably be looking at other brands.

Pros

Cons

  • a lot of the parts are made in china

MAH63jd

From: Lebanon

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

Very disappointed

2/5

First let me start off by saying.. My nearly 2 year old son's room is Green, he is getting a green electric tractor for his bday. Green was the only choice when I looked at tractors . I currently have 160 hours on machine and it is at the dealer for the 4th time. Bearing and seal for pto, hydraulic pump, some sort of valve... and now who knows.. I loathe it to the point I won't buy attachments for it because it makes me ill running the FEL with all the hydraulic noises it makes that it shouldn't. I've been able to steer other people away from this unit please do ur self a favor and stay away. I'm not saying John deere is bad, heck I even offered to trade it in and buy up but apparently it depreciated astronomically in 2 years.. I think around 40%. (I have babied this thing the only nights it has spent outside was in the dealership parking lot always washed greased, and properly operated) I Don't buy this tractor buy something else. I'm a forestry equipment operator of 15 years. I've ran 30 year old pieces of equipment, and equipment with the plastic still on the seats.

Pros

  • fel connects fast and easy
  • mower deck is easy to connect

Cons

  • paints don't match between panels
  • unrealiable

Matt0404

From: Butler, PA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

1
2
5

Best Tractor Ever.

5/5

Way better than the old Ford we used to have. Great gas reduction. And fits into a garage.

Pros

  • easy to use
  • good quality

Cons

Deere110

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

Finish quality is very poor - disappointment and dealer support in this issue made me feel robbed

3/5

This is my third JD compact tractor and the worse quality unit I have had... wish I would have shopped a different color. The first day the seat pins come out and the seat would not stay in place. The controls and stickers were faded and not even installed to a high quality. The dealer had to come get the tractor, change out the seat because of sun fade, replace several stickers and control switches because of sun fade - The bolt came out of the buckets hydraulic quick disconnect after a short use, the deal sent me the whole unit for me to replace (all within the first couple of months. This tractor sits inside a heated barn - the ROP is rusting, the three point hitch adjustment won’t turn and is rusting - and i was told - the third party suppliers haven’t been doing a very high quality job lately.

Pros

  • drive over deck works great
  • elec deck control is great

Cons

  • poor quality finish

Jeremy7620

From:

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

EXCELLENT overall utility tractor with excellent features and options

5/5

I spent months researching and looking at tractors around 32 HP before deciding to purchase a new 2032R John Deere. I seriously contemplated buying used but really wanted the new features on the 2-series that were incorporated in the 2017 model year. Used ones for sale were difficult to find and were practically new price after calculating in shipping costs, proving these John Deere's truly hold their value better than the competition. As for holding out for the new 2-series, it was worth the wait for me. While used pre-2017 models could be had for a small savings over the newer model, I am extremely happy with my 2019 and glad I spent a little extra money for the newer features on a tractor I intend to keep for many years to come. This tractor is very stable with the increased size and weight. The quick hitch makes switching between 3-point attachments extremely quick and easy. The quick disconnect 60D mower deck and 220R loader really do connect/disconnect in just a couple minutes with virtually no labor involved. I've also been very happy with the Frontier 1157 tiller. I am approaching 70 hours on my tractor, most of which have been loader and tiller work, and I've never lacked power to this point. I use the E-throttle feature all the time with loader work and love it. I find the loader hydraulics work well, even at very low engine speeds, which is much better than the competition. Routine maintenance is also easy on this tractor. The separate forward and reverse pedals are IMO much more comfortable than the competitors "treadle peddle". Another great design with the newer 2-series JD is layout: the operator can easily get on/off the tractor from either side, unlike older model JD's or the competitor's tractors. Overall this is an excellent utility tractor in this class size and is very user friendly. Is the slightly higher cost of a JD worth it over the competition? In my opinion - YES! 100% satisfied - this thing is a workhorse!

Pros

  • user friendly features
  • ergonomics
  • stability
  • ease of maintenance
  • excellent loader and mower deck connect/disconnect
  • resale value
  • good hydraulics
  • comfortable
  • good warranty period

Cons

  • higher priced than competition

CRDWIK

From: Hermiston, OR

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

very DISAPPOINTED with loader -- Everything else I like

3/5

As another user reported, the bucket on my 2017 2032R (loader 220R) does not hold it’s tilt back or its position!! If I load the bucket it starts to flop back and forth while driving the tractor causing the load to shift and spill. It will not hold in position. I have to constantly keep rolling it back. Even holding the control engaged, it will still flop. When empty it will do the same, just takes longer (1-2 min) and then bangs back and forth while driving. I took it to the dealer and was told it was within normal tolerances. Very disappointed in this John Deere tractor/loader. What a poor crappy design. My Orange tractor did not do this. There are some aspects I really liked on this over my old Orange tractor, so I bought a new Green one, but this bucket issue driving me back to Orange. If JD would acknowledge this design flaw and correct it, they would have a 5 star unit.

Pros

  • good unit

Cons

  • poor loader design

2032R

From: Plain City, UT

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Expert

4
2
5

Great tractor- 1 small improvement needed

4/5

Wish I had this tractor a long time ago; the amount of time savings its given me getting things done is amazing. I live on an acreage so have a lot of mowing to do in addition to utilizing the implements (snow blower, loader, backhoe)- so the one gripe I have that PLEASE JD IF YOU'RE LISTENING- COME OUT WITH DYNAMIC MULCH CONTROL ON THE 7 IRON MOWING DECKS that ship with the 1-3 series tractors. It was awesome to switch back & forth between discharge and mulching on my old x500 series AccelDeep Deck and ALL I WANT FOR CHRISTMAS is this feature:) I'm' not saying this should hold buyers back from the purchase, I just hope JD sees this and comes out with an on the fly (without uninstalling) mulch kit for the 60D deck so I can switch back and forth as I'm mowing. great tractor, highly recommend!

Pros

  • tons of power
  • high quality build

Cons

  • needs on the fly mulch control option for mower

Edward84

From: omaha, NE

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Bucket problems

3/5

The bucket on my 2032r does not hold it’s tilt back or its position. If I leave the tractor with the bucket raised it will be on the ground in 15 minutes. If I load the bucket with wood to be moved bucket slowly drops while moving the load.I took it to my dealer and he told me it was within normal tolerances. Very disappointed in this John Deere tractor.

Pros

Cons

Arnie

From: Dorset,VT

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

3
2
5

2018 2032R

5/5

I purchased this tractor last July and can't believe I lived without one this long! I added the heavy duty bucket and I highly recommend this upgrade, it has come in handy being able to lift items with chains with the bucket. I also opted for the backhoe attachment, it has plenty of power for digging, I used it to cut drainage ditches across my road which is hard shale and it had no problem digging. other attachments I have or a box blade and a large spreader that saved my back sanding the driveway this past winter, although they are not JD attachments they worked great even though they're not JD Green in color. Overall I love this tractor and very pleased with it's performance and fuel economy as well. If you're debating between the 1 series and the 2 series, spend the extra money on the 2 series you won't regret it.

Pros

  • ease of use
  • operator friendly
  • joystick for bucket on fender is the best
  • very good power
  • excellent fuel economy

Cons

  • none at this time

Pappy

From: Upstate NY

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

2032R "R" stands for it ROCKS

5/5

Purchased the 2032R a little over a year ago. I added the loader, 59" front mount snow blower and Curtis cab with heat. I also added the 3rd SCV as I bought a 60" grapple. Lighting was insufficient for blowing snow so I added a 30" led bar light on the roof of cab and 2-4" led lights on the rear. The tractor is awesome! So far, there is no chore that this tractor struggled. Starts every time. All switches, hydraulics, etc. all work as they are intended. You would not believe the logs I pick up with the grapple! I found out quickly that rear ballast was needed! Great quality and great tractor. Can't say the same for the dealership in Edinboro, PA.

Pros

  • everything!

Cons

  • nothing!

Hags

From: Erie, PA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Love it

5/5

I own a turf management business and use this tractor to pull a 72in APS seeder and it handles it very well. A lot of power on a nice size frame for lawn work. I have had it for over a year now and I have no complaints what so ever. John Deere did a great job on this model series.

Pros

Cons

1234oz

From: Maryland, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

This tractor is well engineered

5/5

Changing implements is very easy. I can remove the loader and install the mower in less than 5 minutes. The only words of caution is not to get diesel fuel on the plastic fenders. It will take the gloss off of the plastic. I now cover around the fuel tank with a towel to catch any drips that may occur. Everything else about this tractor is amazing! The drive over mower took a little practice but now it easy. Cutting the grass with a 72" mower is really fast. The imatch system makes it easy to switch from one implement to another. I would also recommend the quick disconnect for the hydraulic lines for the loader. I can remove the loader without even getting off the tractor.

Pros

Cons

Sawyer

From: South Rockwood, Berlin Charter Twp, MI, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

The tractor worth waiting for

5/5

I purchased the 2032R in June of 2017, newest version. Previously had a 2025 that was 4 years old and just thought this new one would be a little more capable and boy is it. In addition, the seat is significantly more comfortable, new dash and control layout much nicer and I really like the new loader control much better. I added the convenient hydraulic fast block, now I don't even leave the seat to remove and attach the loader. Got the 62" mid mount mower and front end loader at the time of purchase and couldn't be happier. Also had the optional work light kit installed and rear tires loaded. Also like the fuel filling is now on the rear fender instead of up by the hood.

Pros

  • built like a big tractor
  • more fun than it should be

Cons

  • none

DShute

From: Warsaw, NY

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

60' DECK

4/5

I would like to see a cab for this tractor. Air seat would be nice for this tractor. But been having problem with my drive over deck. Gauge is set in one place like 3 1/2 " and then while cutting it will drop to lower number. Do not know why it does that. Any one else have that problem?

Pros

Cons

JABPAB

From: Ripon, WI 54971, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Excellent design and confront his number one

5/5

Excellent design and confront his number one . I’ve owned a 1025R, I purchased a 2032R in 2016 it was OK just very uncomfortable. So I traded that in for a 2032 R My 17 it has comfort design and is so much more that I could ever hope for and a tractor I highly recommend the 2032 my 17 you won’t be disappointed!

Pros

  • 2017 best

Cons

Woodberg

From: Keeseville, NY 12944, USA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Great purchase

5/5

We decided on the 2032r,mower,loader,rear blade so far we love it ,I recommend that the rear lamps be moved to the inside of the rops,to prevent damage, which is easily done.

Pros

Cons

Church

From: Southern ohio

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Very good tractor - just a few minor gripes

4/5

I've had this tractor for over a year and it's handled most things very well. It's powerful, and it seems to be designed well. I use it for mowing, general landscaping, and plowing snow. Here are a few things I would change: 1. It needs a suspension seat (same as the 1025R would be great)!! 2. It would be nice to have a mid-range gear - like Kubota has for situations in between low and high range. 3. Move the hydraulic FEL connections to in front of the foot area, pointing up slightly 4. Offer a cab option like the 3 series. 5. Offer a third hyd. option on the FEL controls - like the 3 series.

Pros

  • well built
  • powerful

Cons

  • needs mid range on transmission
  • needs 3rd hyd. control on fel controls
  • no factory cab option

Smitty

From: Southern Tier, New York, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Tractor works bigger than it is.

5/5

I purchased a 2032R with FEL, 62D mower,72" York Rake, Ballast Box and Quick hitch. This little tractor is mighty, had 650' driveway paved and had to fill in along sides, five triax loads so far and this tractor made short work of the the big piles of top soil. Can't imagine doing with wheel barrow and shovel. Have completed several projects with this tractor and its always up to the task. Tractor is small enough to navigate in woods if you lower ROPS, have cleared woods and brush to make yard bigger and look better. Have patio job to do next, if you buy this tractor just do projects that make wife happy and she will not complain about spending the money on a tractor. Worked great on the blizzard of 2016, pushes 32" of snow like air.

Pros

  • this tractor is like a multi tool swiss army knife

Cons

  • none

Rancher4X4

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Intermediate

4
2
5

Great tractor

4/5

Bought with mowing deck, FEL, 54" blade, and ballast box. 1. Build quality & fit/finish are great. 2. Lots of power. 3. Great stability 4. Great leg room. If you're tall, this is a great choice. 5. 2 design flaws depending on your use a. the 4WD selection lever is on the deck close to the differential lock. Easy to hit the 4WD lever when going for the lock. This can be a significant problem on a hill. b. Brakes are great on level ground, but inadequate on a steep incline. Depends on your terrain.

Pros

Cons

cwolf88

From: VA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

high quality product

5/5

This tractor was obtained for snow removal on a 17% grade blacktop driveway with an S-curve banked the wrong way (winter traction is difficult). This 2032R tractor with front-mounted John Deere snow blower handles it well. An after-market Tektite heated cab keeps the operator warm despite weather outside and it fits into standard 7' overhead garage doors.

Pros

Cons

SatisfiedCustomer

From: Wisconsin, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Parts failing

3/5

I have owned this 2032R for two years and the first year I had to replace both lift bars for the mid mower due to the cotter pin breaking ( 3 or 4 weeks after purchase) and allowing them to fall off and get bent, I replaced them at a cost of $150 and used a bigger cotter pin and have had no problems since, I'm now having issues with the hydo quick connects leaking when the FEL is not connected and had to replace them for $100. JD may want to look at these issues as I see them being blogged about. The tractor is user friendly and mostly reliable.

Pros

  • easy of use

Cons

  • no tilt wheel seat is not a spring saet.

gruntz

From: Lyndonville, NY 14098, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Great Tractor..a couple of issues

4/5

This tractor and the 2520 I traded in are rough riding tractors. My pasture is typical, with rough places and unevenness. After mowing for 2.5-3 hours.....I feel beat up. Both tractors are equipped with the R-4 tires, so those with turf tires would likely ride smoother. The other issue is some of the mower attaching hardware (pins/washers/etc) is of poor quality. Replace with heavier duty stuff from Ace or Lowes. Other then these two things, I really like the tractor and would recommend to anyone. Would buy another as well.

Pros

  • great dealer service.
  • well made tractor
  • easy operation

Cons

JDBUCKEYE75

From: Ohio, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Dynamite 2032R!

5/5

After a great deal of shopping around, I just took delivery of this little beast! Traded in my X758 for the 2032R. Wow-what a difference! We own a home on 35 acres, four of which I mow. We also have a very challenging 2,000 foot gravel driveway to maintain during winter months. Along with the tractor, I purchased the 62" mid-mower, loader and 53" bucket, ballast box, aftermarket pallet forks, 60" landscape rake & 60" front snow blade, and I kept the JD 54" front snow blower that I used on the X758. The power generated by this little Yanmar is impressive! Although I have yet to mow or move snow with this rig, we've done some 3 point and loader work. I barely even know that a 250lb landscape rake is on the back, even in use. The 53" bucket is perfect for digging and maneurvering in close quarters. The i-match system is an absolute must, and I'm so glad I included it with the package. Due to some sloping on the property, I swapped the rear tires around to their widest position and gained another 3" of width for added stability. I've loaded down the ballast box with cinder blocks and eight 42lb suitcase weights hanging along the sides. My only complaint is the RIO safety feature. Man, what a pain! I understand it's for safety-sake, but there has to be a better way. That said, I love this tractor. The overall build quality is stellar and everything fits and comes together as one would expect from John Deere. Borrowing the bank's money for FREE for 60 months felt pretty ok also.

Pros

Cons

greenfever

From: Wisconsin

Length of Ownership:

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Tough little machine!

5/5

My 2032r was delivered early Jan 2014 and I immediately used it to plow snow. I bought a H130 FEL, 62C drive over mower deck and Frontier AF11 front blade, 2060 box scraper, and RC2072 rotary mower. I find the 6" front blade to be far superior to the smaller 54" blade, plus it is quick attach to the loader arms. I plow a 500"+ drive and have found this tractor so easy and capable (hydro transmission is SWEET!) that I now plow part of the street and neighbors, etc. 12" of wet Iowa snow curls right off the blade in high gear even. Great stuff. No problem starting the the cold either. the little Yanmar rattles and rolls like diesels do when cold, but gets moving quickly and the hydraulics warm fast also. I have both the trans and engine heaters installed as well and they make a cold start the same as summer. All attachments I bought have been used many times for moving heavy clay (box blade and loader), mowing virgin 3-4' field grasses (RC2072) and moving my 3-4 acres of 'lawn grass' (62C). Each attaches easily and are solidly built. You will pay a bit more, but just take a look at the weld quality, metal dimensions and overall weight vs. 3rd party suppliers. I can't compare with Kubota or Mahindra, etc, cause I don't own them. but this machine works hard and comfortably. I recommend you consider an aftermarket hydraulic top and tilt kit for the 3 point hitch as you will see MUCH improved results with implements. It's a shame Deere doesn't offer that as a factory option. I don't know what machine would be as friendly to a homeowner, contractor or even large landowner when you have to make it into horse stalls, mow the lawn, move telephone poles, level fields, dig ponds (all of which I have done or am doing...) etc. Man - I really want a back hoe, but have to save up for that. I'm not in want of more power, only more weight. And I can add that! Great machine IMHO. Great dealer also! PK Midwest. Remember - "YOU GET WHAT YOU PAY FOR"

Pros

  • power
  • versatility
  • dealer support
  • attachment variety
  • engine
  • john deere

Cons

  • price

EdODeere

From: Cedar Falls, IA, USA

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5

Many task made easy

5/5

The challenge was to get a tractor large enough to be able to mow a field and small enough to mow the lawn. Chose this one because it could do so many tasks. Along with the tractor, bought a 60" rotary cutter, a 60" belly finish mower, a 60" bucket and front end loader, a 54" rototiller, a 54" snow blower, and a 54" front end hydraulic snow blade. All the equipment is John Deere except the field mower is Frontier. The appeal was to be able to interchange the equipment as needed without exerting a lot of time and energy. There was a lot of snow to clear this year and the equipment worked great. The garden was next and was easily tilled. Now the mowing is happening and again the equipment performs as desired. There are no complaints. And when it comes time for service, the dealer has been great to work with, so there should be no problem getting good service.

Pros

Cons

TimL

From: York County, PA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

excellant equipment

5/5

john deere is still putin out quality ==bought this tractor with bucket ,backhoe an box scraper ..I have been movin dirt on uneven ground for the last 3 wks. 8-10 HRS day ..up hills an down. I get lost in operating this tractor it s that easy to use the only complaint I have is the exhaust system could have been plumbed different ===LOOKING FORWARD TO THE NEXT FEW MONTHS ON THIS TRACTOR ..AS A FARM BOY GROWN UP THIS TRACTOR REMINDS ME OF THE DAYS ON JD 4020 -WONDERFULL FUN

Pros

  • easy to use

Cons

  • exhaust

SHPFX

From: Shelton, WA 98584, USA

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Expert

4
2
5