×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

2025R

Compact Tractor

  • Powerful and fuel-efficient Tier IV Yanmar engine
  • Hydro transmission with TwinTouch™ pedals for ease of use
  • AutoConnect™ 7-Iron Drive-over mower decks up to 60 inches
  • See Ways To Save
Starting At:$ 17,043.00
Apply For Financing
Buy OnlineMaintenance Plans
View Product Brochure



Features



3-cylinder Yanmar TNV Series diesel engine 3-cylinder Yanmar TNV Series diesel engine

Power is provided by a durable and efficient high-torque three-cylinder Yanmar® TNV Series diesel engine.

 

This series of engines was developed to meet Tier 4 Environmental Protection Agency (EPA) environmental requirements by featuring low levels of both exhaust and emissions.

 Model

Number of
cylinders

Engine
displacement

Gross engine power

Power take-off (PTO) power

2025R

3

1.267 L

18 kW (24.2 hp)

13.4 kW (18.0 hp)

Yanmar TNV Series engine offers these features:
  • Economical for good cooling and long life
  • Isolated engine provides reduced vibration and noise for the operator; indirect fuel injection uses a precombustion chamber to give the engine a smooth and quiet operation; aluminum-alloy piston with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
    • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and less noise from the piston slap
    • Higher top rings on the piston and a thinner head gasket greatly reduces the volume of unburned waste gases and increases combustion efficiency
  • Timing-gear teeth have a designed roll-off profile giving almost no clash,nonoise,andnobacklash
  • High-torque reserve provides plenty of power under heavy load, yet retains excellent fuel economy
  • Easy access to engine check and fill points on the right-hand side of the tractor by removing the side panels
  • Fuel filter with replaceable element
  • Full-pressure lubrication system provides filtered oil under pressure to all vital engine parts
  • Glow plugs provide quick starts in temperatures down to -18°C (0°F) (Optional engine coolant heater attachment will assist starting under more extreme conditions.)
  • Auto-bleed fuel system means there is no special bleeding required if the tractor runs out of fuel; this system will self-prime the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shut off eliminates fuel shut-off knob
  • Electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Dry-type air cleaner with safety element keeps dirt and other contaminants out of the engine
    • Safety element (second filter) will protect engine if primary filter would develop a leak
    • Protects engine when servicing primary filter
  • Air filter restriction indicator is standard equipment on the 2025R Tractor
  • Sealed-radiator compartment keeps trash and debris on outside of hood
  • Horizontal exhaust discharges fumes away from the operator station, reducing noise and improving operator visibility and comfort

Yanmar is a trademark of Yanmar Company Limited.

The 2R Series are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.

  • No clutching for fast and easy direction changes
  • Twin Touch™ foot pedals for quick and easy forward/reverse operation
  • Transmission oil cooler cools transmission oil for longer transmission life

Safety features of the HST include:

  • The tractor will only start with the range lever in neutral
    • If the range lever is in gear when the key is turned to the start position, the instrument panel instructs the operator to shift to neutral
  • The engine will shut off if the operator leaves the seat and the forward/reverse pedals are depressed
Twin Touch foot controls Twin Touch foot controls
Two-range transmission
Two-speed transmission Two-speed transmission
#

Transmission has two speeds - hi and lo range.

  • The range lever is located next to the seat, conveniently within reach of the operator
  • All tasks can be performed using two ranges on the 2025R which means less shifting throughout the day

Durability features include:

  1. Large forged one-piece trunnion shaft with larger support bearings that reduce vibration and noise
  2. Innovative transaxle combines an HST, gear reduction axle, and clutch
  3. Pressure side filtration allows the use of a fine-mesh filter
  4. One pump to supply charge pressure and implement A flow divider splits the flow to various circuits throughout the tractor.
  5. The transaxle has an oil cooler which provides improved hydraulic cooling performance
Easy to change implements Easy to change implements
#
  • Front Quik-Tatch™ hitch makes changing front implements quick and easy
  • All front implements (blades, brooms, and snow blowers) use a common hitch
  • AutoConnect™ Mid-Mount Mower Deck, 120R Loader, and 260B Backhoe can be taken on or off within 5 minutes, and no tools are required
  • Changing rear implements is a snap with the iMatch™ Quick-Hitch, which has three fixed points to back in and pick up a rear implement that is iMatch compatible
Implement compounding (2025R Tractor shown) Implement compounding (2025R Tractor shown)
  • Loader, mid-mower, and a variety of rear hitch implements can be attached to the tractor at the same time
  • Optional premium independent mid lift system operates independent of the rear 3-point hitch. This gives the operator the flexibility to leave the mid mower attached when completing other tasks.

Open operator's station Open operator's station
#

The operator’s station has been designed to allow for greater operator comfort and increased visibility. The ergonomic layout and convenient color-coded controls with large labels allow for easy identification and operation. Large and easy to grab handrails are located on each fender for an easier on and off of the tractor from either side.

 

Below are other key features of the 2025R Tractor operator’s station:       

  • Sloping hood design provides improved visibility
  • Plenty of room for comfortable operation
  • Cup holder, multiple storage compartments, and a 12-V outlet ensures an organized operator’s station
  • Fender-mounted handrails are large and easy to grab, assist the operator in getting on and off the tractor
  • Rubberized floor mat design to reduce vibration and noise
  • Step-through operator platform makes getting on and off the tractor easy
  • Front-horizontal exhaust for increased operator visibility
  • Controls have been raised and integrated into the fender for operator comfort and ease of use
  • Large, easy-to-read decals provide clear instructions for experienced and even non-experienced operators
  • Portable toolbox integrated into the front frame of the tractor
  • Fuel tank is located on the rear of the tractor to allow for easy access when fueling
Left-side step
Left-side step Left-side step
  • The left-side step allows for easy access on and off the tractor
  • Foot platform has non-skid surface
Premium seat
Premium seat Premium seat

The thick, soft padding on this seat provides a smooth and comfortable ride. A high, scalloped back makes it easier for the operator to turn to view rear implements. The embroidered logo and premium vinyl not only provide an easy-to-clean surface but also a well-polished design.

  • Seat adjusts fore/aft for operator convenience
  • Seat flips forward for protection from the elements
  • High seat back and armrests are in base equipment and allow for a more comfortable operation
  • Retractable seat belt feature prevents the seat belt from becoming tangled in the seat suspension and controls

Key features of the operator’s station include:

  • Tilt steering wheel design in base equipment on the 2025R Tractor
    • Allows the operator to adjust the steering wheel to the most comfortable position
    • Provides additional clearance for the operator to enter and exit the tractor
    • Provides easy return to the fully raised position
    • Provides plenty of room for comfortable operation
Tilt steering wheel design Tilt steering wheel design
Folding rollover protective structure Folding rollover protective structure
  • Easy-fold rollover protective structure (ROPS) allows the tractor to be used or stored in low-clearance environments
Lighting
Standard lighting shown Standard lighting shown
Optional premium lighting shown Optional premium lighting shown

Standard equipment lighting includes:

  • Two front-mounted sealed-beam halogen headlights
  • Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
  • Two additional fender lights are standard on the 2025R
  • Additional front- and rear-light kits are available

For those operators requiring additional lighting, additional light options are available:

  • Premium light kit
    • Two light-emitting diode (LED) fender lights
    • Two LED ROPS work lights (adjustable 360 degrees for forward or rear lighting)
    • One LED rear PTO light
  • Auxiliary rear work light
    • One halogen light
  • Forward halogen work light kit
    • Contains two ROPS mounted lights
  • Forward LED work light kit
    • Contains two ROPS mounted lights

NOTE: Lights mounted to the ROPS will require the warning light brush guard kit.

 

Optional work light brush guards can be ordered to protect lights from debris.

#
#

The optional premium independent lift system has been improved over the current 1 Family system by now allowing the operator to have full control of the mower deck in both the raise and lower positions. When the operator reaches the desired height, the button can be released and the deck will hold its position. This feature reduces the effort required to adjust the height-of-cut (HOC) dial and it also allows for quick height changes on the go.

iMatch Quick-Hitch iMatch Quick-Hitch
iMatch Quick-Hitch with rotary cutter hookup iMatch Quick-Hitch with rotary cutter hookup
iMatch Quick-Hitch (LVB25976) iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976) iMatch Quick-Hitch with rotary cutter hookup (LVB25976)

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
    • Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
  • Lower bushings
    • Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Two quarter-turn fasteners allow operators to easily remove the engine side panels without tools to access to the engine compartment.
Fasteners on the engine side panels Fasteners on the engine side panels
  • The under-hood gas-lift support provides easy access to the engine compartment and eliminates the need for a mechanical prop rod.
Under-hood gas lift makes it easy to access the engine Under-hood gas lift makes it easy to access the engine
  • External hood latch requires no tools and can release using the tractor key.

  • Easy access to regular service points minimizes service time.

  • Daily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panels.

  • Tractors are equipped with a mechanical air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changed.

Air filter restriction indicator Air filter restriction indicator
  • All external engine, fuel, and transmission filters are easily accessible.
  • Fuel tank is located on the rear of the tractor to allow for easy access when fueling.
Fuel tank at rear of tractor Fuel tank at rear of tractor

NOTE:  Always refer to the operator’s manual for complete maintenance and service recommendations.

2025R Tractor 2025R Tractor
  • The 2025R model includes factory-installed mechanical deck lift components.
  • The addition of these components from the factory significantly reduces the time required to do the initial mower deck installation at the time of purchase.
  • Refer to the mowers and material collection page for more details on mower deck installation and compatibility.
Increased productivity using auto throttle Increased productivity using auto throttle

An optional auto throttle kit is available for the 2025R Tractors. When auto throttle is installed, the engine rpm and transmission speed will increase as the Twin Touch™ pedals are depressed. The harder the hydro pedal is pressed, the more engine speed available. This feature can be beneficial for use in many different applications, especially for front loader work and when transporting on roads or in parking lots. It is designed to make the tractor quieter and use less fuel.

 

For loader work, producers will get maximum benefit from the system by increasing engine rpm with the hand throttle to at least 50 percent. Once the hand throttle is set, auto throttle will help provide the feeling of a power boost when the producer is filling the bucket with material from a pile. In this scenario, as the operator presses the pedal, the engine will operate between 50 percent throttle and 100 percent throttle. It will not go below 50 percent until the hand throttle is lowered back down.

 

In power take-off (PTO) applications such as mowing or snow blowing, auto throttle is not recommended because PTO implements usually require a constant speed in order to properly function and optimize performance.

The Mauser cab offers protection from the elements and expands the versatility of 2025R Tractors to perform in all climates.

2025R cab 2025R cab

Key features:

  • Full glass doors for maximum visibility
    • Curved glass for a styled look
    • Sealed for cold weather operation
    • Easily removable for summer operation
  • Heater with fan
    • Switches and vents integrated into headliner
  • Dome light
  • Fully openable front and rear windows with gas struts
  • Front sun visor
Operator view from inside the cab Operator view from inside the cab
  • Front work lights
Front work lights Front work lights
  • Front wiper with washer system
  • Dual outside mirrors
  • Rollover protective structure (ROPS) certified cab frame
    • Allows for improved rear visibility
    • Reduces overall height
  • Rubber isolation at all mounting points
  • Interior sound insulation
Interior sound insulation Interior sound insulation
  • Immersion-primed and powder-coated cab frame
    • Provides superior corrosion resistance
  • Integrated John Deere styling
John Deere styling on 2025R cab John Deere styling on 2025R cab

Specifications:

  • Cab height: 1495 mm (58.9 in.)
  • Overall height when installed: 2040 mm (80.3 in.)
  • Overall height when installed to top of beacon: 2210 mm (87 in.)
  • Overall width with cab installed: same as tractor width
  • Cab weight: 236 kg (520 lb)

Optional kits:

  • Rotating beacon light – BXX10310

Compatibility and installation:

  • Compatible with:
    • Model year 2017 and newer 2025R Tractors
  • Not compatible with:
    • 260B Backhoe

Specifications


Compare the specifications of up to 4 models

Key Specs 2025r
Current Model
Engine power (gross)17.8 kW
23.9 hp
SAE J1995 rated power
Power take-off (PTO) power13.4 kW
18 hp
Steering hydraulics13.25 L/min
3.5 gpm
Implement hydraulics13.25 L/min
3.5 gpm
Hitch typeLimited Category 1
Lift capacity, 24-in. behind link arms400 kg
882 lb
Standard transmission; forward/reverseHydrostatic - 2 range
Cruise controlStandard
Approximate shipping weight (open-station; cab)813.5 kg
1793.4 lb
Wheelbase1600 mm
63 in.
Engine
FamilyGYDXL1.27NS1
HYDXL1.27NS1
ManufacturerYanmar
Engine model3TNV80F-NCJT
Engine power (gross)17.8 kW
23.9 hp
SAE J1995 rated power
Power take-off (PTO) power13.4 kW
18 hp
Rated engine speed3200 rpm
TypeDiesel
Injection pump typeIndirect injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacement3 / 1.267 L
3 / 77 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke80 x 84 mm
3.2 x 3.3 in.
Compression ratio23:01
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed53 Nm
39.09 lb-ft
Fuel tank capacity20.4 L
5.39 gal.
Electrical
Battery size500 CCA
Alternator (12-V)40 amp
Starter size1.2 kW
1.6 hp
Fuel system
TypeIndirect injection
Fuel consumption
5.8 L/hr
1.5 U.S. gal./hr
Transmission
Standard transmission; forward/reverseHydrostatic - 2 range
Optional transmission; forward/reverse
Left-hand reverserNo
Transmission gear ranges
Final driveSpur Gear
BrakesWet disc
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
612 kg
1349 lb
Rear
1100 kg
2425 lb
CreeperNo
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load
Hydraulics
TypeOpen center
Pump rated outputSteering
13.25 L/min
3.5 gpm
Implement
13.25 L/min
3.5 gpm
26.5 L/min
7 gpm
Pump typeGear
Maximum operating pressure148.2 bar
2150 psi
Draft control sensingPosition control
Remote control valves availableTwo
3-point hitch
TypeLimited Category 1
Lift capacity, 24-in. behind link arms400 kg
882 lb
Power take-off (PTO)
StandardRear - 540 rpm
Mid - 2100 rpm
Optional
ControlIndependent
ClutchWet disc
Brake (for mid and rear PTO)Wet disc
Engagement method
Fluid capacities
Crankcase with filter2.7 L
2.9 qt
Transmission and hydraulic system
Final drive
TypeSpur Gear
Differential lockYes
Operator station
Rollover protective structureType
Foldable
OSHA, SAE, ASAE
Platform - flat/straddleThree-piece semi flat
Gear shift location - console/floorLeft-hand side
Cab
Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment
Dimensions
Wheelbase1600 mm
63 in.
Front axle clearance316 mm
12.5 in.
Turning radius with brakes
Turning radius without brakes2.65 m
8.7 ft
Limited slip differentialNo
Approximate shipping weight (open-station; cab)813.5 kg
1793.4 lb
Tires
FrontR3 Turf - 23x8.50-12
R4 Industrial - 23x8.50-12
R3 Radial - 220/55-R12
RearR3 Turf - 31x13.5-15
R4 Industrial - 12-16.5
R3 Radial - 280/70-R16
Front tread range95.3 cm
37.5 in.
Rear tread spacing
Miscellaneous
ToolboxYes
Tilt steering wheelYes
12-V OutletYes

Offers and Discounts

Save $350¹

on New John Deere Sub-Compact & Compact Tractors

  • Save $350¹ with the purchase of 2 or more John Deere or Frontier implements on all New Sub‑Compact & Compact Tractors
  • Offer available 01 May 2020 through 04 August 2020
Studio image of 1025r Sub Compact Utility Tractor

90 Day No Payment No Interest¹ AND Free Delivery (up to $100)²

on new John Deere Sub-Compact & Compact Tractors

  • 90 Day No Interest No Payment followed by 0% APR fixed rate for 58 months¹ AND
  • Free Delivery up to $100²
  • Offer available 30 March 2020 through 01 June 2020
image of 2025R compact utility tractor in studio

Save $500 with cash purchase¹

on New John Deere 2025R Compact Tractors

  • Save $500¹ on the cash purchase of 2025R
  • Offer available 01 May 2020 through 04 August 2020

Save $350 with the purchase of two or more Implements ‑

Click for details
image of 2025R compact utility tractor in studio

0% APR fixed rate for 60 months¹ AND Save $300³

on New John Deere 2025R Compact Tractors

  • 0% APR fixed rate for 60 months¹ OR
  • 1.90% APR fixed rate for 72 months²
  • AND

  • Save $300³
  • Offers available 01 May 2020 through 04 August 2020

Save $350 with the purchase of two or more Implements ‑

Click for details

¹Offer valid for $350 off on all New John Deere Sub-Compact and Compact Tractors when purchased with two or more John Deere or Frontier Implements purchased from an authorized John Deere dealer between 01 May 2020 and 04 August. Each implement must have a minimum list price of $350. Prices and models may vary by dealer. This can be combined with the regular installment options. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Offer is available only on New John Deere Sub-Compact and Compact Utility Tractors only at participating United States dealers. Prices and savings are in U.S. dollars.

¹Offer valid on qualifying purchases made between 30 March 2020 to 01 June 2020. Subject to approved installment credit with John Deere Financial, for consumer use only. Down payment may be required. Average down payment is 10%. No payments, no interest for 90 days, followed by 0% APR for 58 months only. $17.24 per month for every $1,000 financed. Taxes, freight, setup and delivery charges could increase monthly payment. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

²Offer available on qualifying purchases made between 30 March 2020 to 01 June 2020 at participating dealers. Save up to $100 on delivery fees for any Compact Utility Tractor (1 thru 4 series tractors) and/or any 5 series tractor. This can be combined with the regular installment options or cash sales. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Some restrictions apply. See participating dealer for details and other financing options. Offer is available only at participating United States dealers.

¹Offer available on qualifying purchases made between 01 May 2020 to 04 August 2020. Prices and models may vary by dealer. Save $500 USD on 2025R only. This cannot be combined with the regular installment options. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Some restrictions apply. See participating dealer for details and other financing options. Offer is available only at participating United States dealers. Prices and savings are in U.S. dollars.

¹Offer valid on qualifying purchases made between 01 May 2020 to 04 August 2020. Subject to approved installment credit with John Deere Financial. No down payment required. $16.67 per month for every $1,000 financed. 0% APR for 60 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or in John Deere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

²Offer valid on qualifying purchases made between 01 May 2020 to 04 August 2020. Subject to approved installment credit with John Deere Financial. No down payment required. $14.68 per month for every $1,000 financed. 1.90% APR for 72 months only. Taxes, freight, setup and delivery charges could increase monthly payment. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or in John Deere's Rental Business Program are not eligible. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

³Offer available on qualifying purchases made between 01 May 2020 to 04 August 2020. Prices and models may vary by dealer. Save $300 USD on 2025R only. This can only be combined with the regular installment options. Sales made to government agencies, company direct sales or other businesses/agencies that participate in John Deere's Special Discount Program or Rental Business Program are not eligible. Some restrictions apply. See participating dealer for details and other financing options. Offer is available only at participating United States dealers. Prices and savings are in U.S. dollars.

Accessories and Attachments

Ballast

Ballast Box - BW15073

Ballast Box Extension - BW15074

Cab Operator's Station

Drop-on cab from Mauser (Heat Only) - LP70009

Illuminated Rear License Plate Kit - LP70014

Rear LED Work Light Kit - LP70013

Rear Wiper Kit - LP70011

Stereo Kit - LP70016

Cold Start Packages

Engine

Auto-Throttle Kit - BLV10784

Engine Coolant Heater Kit (110 Volt) - BLV10640

Exhaust

Front Fenders

Front Hitch

Front Attaching Support kit (model year 2017- 2025R, 2026R) - BLV10680

Hydraulic angling (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) - BLV10880

Quick Hitch Kit (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) - BLV10708

Front Power Take-off (Pto)

Front Weights

Front Wheels And Tires

220/55-12 (R3 Turf) Radial Front Wheels & Tires - BLV10745

23x8.5-12 (R3 Turf) Bias Ply Front Wheels & Tires - BLV10741

23x8.5-12 (R4 Industrial) Bias Ply Front Wheels & Tires - BLV10743

Hydraulics

3rd Function Selective Control Valve - BLV11156

Rear Selective Control Valve Kit - BLV11025

Rear Tubing Kit - BLV10775

Lighting

Auxiliary Rear Work Light Kit (1 Light) - LVB25547

Beacon Light Kit - LP70012

Forward Lighting Kit (2 Lights) - LVB25546

LED Work Light Kit - BLV10497

Premium LED Work Light Kit - BLV10673

Rotating Beacon Light - BXX10310

Warning Light Brush Guard Kit (Two Guards) - BLV10400

Work Light Brush Guard Kit (OOS Only) - BLV10399

Miscellaneous

Rear License Plate Kit (Includes Light) - BLV11042

Tractor Cover - LP95637

Open Operator's Station

Canopy Kit - Rigid Plastic - LP64809

Seat Cover - LP68694

Power Take-off (Pto)

Rear Fenders

Rear Wheel Weights

Attaching Hardware for Rear Wheel Weight, 60 lb - BM17987

Rear Wheel Weight, 60 lb (27.2 kg) - BM17965

Rear Wheels And Tires

12-16.5 (R3 Turf) Bias Ply Rear Wheels & Tires - BLV10740

12x16.5 (R4 Industrial) Bias Ply Rear Wheels & Tires - BLV10742

280/70-16 (R3 Turf) Radial Rear Wheels & Tires - BLV10744

Three-point Hitch

3-Point Hitch Tractor Receiver Hitch - LP25001

iMatch Quick Hitch Bushings - LVU12858

iMatch Quick Hitch Bushings - LVU15507

iMatch Bushing Kit - LP19969

iMatch Bushing Kit - LP25004

iMatch Quick Hitch Upper Adapter Bushing - PM00353

iMatch Quick Hitch Upper Adapter Bushing - PM03008

iMatch Quick-Hitch Category 1 with adjustable top hook - LVB25976

iMatch/Quik-Coupler Brushing Kit - BW15056

Weights

Wheels And Tires

Reviews

4.14

14 reviews

Rating Snapshot

10
1
0
0
2
4.17
4.25
4.42

second lawn tractor to blow head gasket

1/5

I have been a loyal JD customer for the past 32 years. But, as of late, I am getting very frustrated with the product. My 2025R just blew a head gasket! It is 2 years old with 400 hrs. This is the second machine that I have owned that has blown a head gasket. No....I did not overheat the engine. My 1026R that I traded May 2018 also blew a head gasket with minimal hours on the engine. I have always been a JD fan but this is getting frustrating and very suspect. What is going on with the Yanmar Diesel that they are blowing head gaskets. I have antifreeze leaking out of the head gasket and dripping down the side of the block. Be on the look-out for this telltale sign of a blown head gasket. My dealer says this is unusual and I must be unlucky. What the heck John Deere? I am now dead in the water for 7-10 days without a machine and a ton of projects and grass cutting that needs to get done. I need a reliable product! Sincerely, loyal JD customer but fading fast.

Pros

Cons

  • blown head gaskets

cjHwisc

From: Suring, wisconsin

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

1
2
5

John Deere Quality 2025R

5/5

I recently purchase a new 2025R and I absolutely love it. I purchased several addition implements To help manage my property such as a Brush Hog, Box Scrapper and my favorite a Backhoe. It works fantastic for digging out Arizona brush and buried rocks in the hard soil. The 2025R is a small tractor but it has passed every test that I have put it to. In addition it is very easy to operate. The only issue I have is I can’t get my wife off of it.

Pros

Cons

Azrich

From: Prescott Valley

Length of Ownership: 3months

Usage Frequency: Daily

Level of Expertise: Beginner

5
2
5

Tractor is close to my 30 year old John Deere 855

4/5

I like the 2025R for the most part and in the market for a new John Deere tractor. Mostly for my experience with my John Deere 855 which will be 30 years old this year. My 855 has been extremely dependable and I have only needed to replace the battery and other small maintenance items such as oil and filter changes. With this legacy, I'll purchase another John Deere. I've also looked at the modem 2032R and find it better suited for me. Although the 2032R has roughly 600 more pounds in weight, it also has 40 percent more in rear linkage capacity and front end loader capacity. Turning radius between the 855, 2025R and 2032R is only 6 inches difference. Tire sizes are within proximity to each other. Although the 2025R is a great machine and will suit most I have to pick the 2032R because, unlike the 2025R,it does not have a Limited category hitch which may limit lift height and linkage width. All in all, it's a John Deere and both great tractors.

Pros

  • dependable tractor

Cons

  • limited category hitch

Ed855

From: Cambridge, Ohio

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

0
2
5

fantastic little machine

5/5

Just bought a 2025r this year with loader and backhoe. I own a landscape construction company and was looking for a smaller scale machine to get into tight areas that all my other skid steers and excavators cannot get into. I was very doubtful at the beginning that this machine could perform to the needs that myself and my guys were looking for... but let me tell you i was very wrong. This machine has already become an essential piece of the crew. Even though it is very small compared to my other equipment , it can definitely hold its own. Plenty of power and super user friendly. I would highly recommend this machine to anyone. From a business standpoint , a happy crew is a productive crew and this machine alone has definitely ramped up production by itself. well worth every dollar invested.

Pros

Cons

michael87

From: sterling, ct

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Huge tractor in a small package

5/5

I have a 2014 2025r with 658 hard hours on a 62 acre Christmas tree farm. I run a 5' brush hog, 5' tiller and a 64" rear snowblower. It handles them all awesome with no problems. I have worked the snot out of this tractor and it only amazes me. The tiller and bucket combination has turned it into a little bulldozer. I have cleared a lot of brush and trees with the brush hog on back and forks on the front. I have a hard time believing the people who rated this low knew what they were doing. I do wish that manufactures including john deere would make a skid plate to protect the front drive shaft at the output end to keep tall weeds from wrapping around and snapping it. I built my own.

Pros

  • tough as nails

Cons

Impressed

From: verona, ny

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

My First Compact Tractor

5/5

I researched this purchase for probably 2 years. My biggest struggle was is 2025R worth the extra cost over a 1025R. I must say that yes it was the increased ability is well worth the additional cost. I loaded the tractor up with options. 3rd function valve was the same as purchasing a diverter and is more capable option and a much cleaner installation. The Load N Go is great for working on the deck.

Pros

Cons

MIFree

From: Michigan

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5

2015r with loader,backhoe,mid mower and pallet forks

2/5

Oil leak at rear of tractor. Loader leaks down quickly! From a height of 41" the bucket is on the the ground in 6 minutes. Raising the 3 point lever causes engine to labor. Will also cause independent mid hydraulics to raise by itself. Loader bucket is difficult to put on. Pallet forks fits perfectly as does my son's bucket from his 1025r Tractor was delivered with nuts and bolts loose and some pins missing. It you contact service is always 2 to 3 weeks before we can work on it. Yet they delivered it in that condition.

Pros

  • none

Cons

  • poor quality control.
  • very expensive
  • service told me because i bought it in the
  • spring they were rushing through every thing

REStu

From: Onsted Michigan

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Expert

0
2
5

Love this tractor

5/5

Use this tractor in an automotive repair/agricultural setting, it does everything I ask it to do, don't be fooled by its small size...it is mighty

Pros

Cons

CBw12

From: Cda idaho

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

so far so good

5/5

doing various jobs around my 3 acres, i find this 2025 a nice size tractor. i have the loader and the oh so convenient backhoe attached fulltime. i find myself using the backhoe more. yes, you can stall it if you try grabbing more than its meant for. but just know the limitations of this size tractor and you can flogg it all day long and get a lot done without breaking a sweat. i just dont want a huge tractor. been there done that. if i trade in a few years i most likely will stay with J D. and move up to 2032 for that little extra asskick. otherwise it will be the same. such a good product. i used to be a design engineer for Cat and we always had to watch out for J D outdoing us for durability. J D is a good value for the money.

Pros

Cons

jaybee

From: TX

Length of Ownership:

Usage Frequency:

Level of Expertise:

4
2
5

I have 2025 from 2014. I have been very happy with it.

5/5

I use have 350 hours on a 2025 from 2014. Mow, bushhog, load and grade gravel road. It has served me well. I keep in garage and have no issues with rust. Still looks great. If I got a new one I would get a bigger one I think. You can never have too much tractor.

Pros

Cons

Kent50

From: Edinburg va

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

tough and resilient

5/5

Bought this tractor 3 years ago to manage farming one acre and mowing several acres of rough field. I've beat the heck out of it with no problems and it continues to perform well. It has excellent 4WD and is capable of most small tractor duties. The front loader has been a life saver in preparing our dirt road annually.

Pros

  • tough has not broken ever
  • excellent 4wd

Cons

  • have broken signal lights by mowing near branches

johnjrs

From: Massachusetts

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Mean little tractor

5/5

I was raised on a Texas Cotton farm and ran BIG Deere stuff (200-300HP tractors)all my youth years. Grew up moved to town only to find I really missed the country. Bought a small piece of land (30 acres)and needed a small tractor to work it. Purchased a 2025r with a front end loader, 48" Brush bull shredder and box blade. This little tractor is a beast! I dug a 20x40' pit 6' deep in near solid rock with the front end loader and teeth down on the box blade. I would break up the rock with a hand jack hammer into car hood or so size pieces and haul em out. I was VERY surprised how much power this tractor has and how much you can push in 4 wheel drive. The 48" brush bull with swinging hammer blades will mow ANYTHING smaller than 1.5" in diameter, Our place WAS covered in heavy thick central Texas Brush and Acasia bushes. This setup will mow em down flat in one slow pass. Prickly pear cactus is no problem either. I purchased a Frontier brand 54" rock bucket later that allows you to grub Cactus and move softball and bigger size rock with ease while letting the dirt fall through the "teeth". I just bought a 62D belly mower but have not used it yet as it id Jan 2nd as I type this review. I would highly recommend this tractor. I would say to any owner to put some good tire sealant in the tires as they will be flat if you run them in Mesquite or Cactus much. The tires are sorta thin IMO. Having said that I beat on mine pretty hard in sharp rock under heavy loads and haven tore a tire up yet...

Pros

  • easy on fuel

Cons

  • needs thicker/heaiver tires

littledeereowner

From: Brownwood TX

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Expert

5
2
5

2025R

1/5

I ordered a 2025R with backhoe and bucket and a 54 inch mower deck. I have had the backhoe rebuilt after a hour of use do to excessive leak down. I would disconnect it and it would just bleed off to the ground making it hard to reconnect even if I tried right after I took it off. The backhoe has no power and will not dig through the smallest roots. Tractor did not have the power to back up a slight incline with a full bucket of topsoil just wouldn't move. The drive on and off mower did not work as advertised when the John Deere mechanic was showing me how to use it the mower caught the bucket stand and bent a number of brackets up front. The neutral safety switch has no light and is hard to get to engage half the time the tractor is killed when you get off when you think you have it engaged.

Pros

Cons

Senior

From: Wellsboro, PA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

1
2
5

Great Tractor

5/5

I use this for Grinding Stumps, and other general tractor work. Traded in my 1025R for this one. It is a very great up-grade. Heavier and sturdier, which is what I needed.

Pros

  • power

Cons

DanTabler

From: Hedgesville WV

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5