×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

X330 LAWN TRACTOR 48 IN

Lawn Tractor with 48-inch Deck
x300-series

  • 22-hp (16.4-kW)* Cyclonic engine
  • 48-in. Accel Deep ™ Mower Deck, compatible with optional MulchControl™ kit with one-touch technology
  • Twin Touch™ forward and reverse foot pedals
  • 4 year/300 hour bumper-to-bumper warranty
$ 4,399.00 MSRP

PLUS ADDITIONAL CHARGES


Apply For FinancingBuy OnlineMaintenance Plans
View Product Brochure
60 Day Promise



Features



Cyclonic V-twin engine is smooth running and powerful

22-hp (16.4-kW) engine 22-hp (16.4-kW) engine
22-hp (16.4-kW) engine 22-hp (16.4-kW) engine

The 22-hp (16.4-kW) V-twin engine used in the Select Series™ X330 Tractor provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:

  • V-twin cylinder design for greater torque, lower vibration, and improved sound quality
  • Large, 44.2-cu in. (724-cc) displacement
    • Plenty of torque helps to get the job done fast.
    • Large displacement engine increases the ability to get an even cut without mowing a second time.
    • Camshaft and carburetor designs create the optimum torque rise for rapid response to varying load conditions.
  • Electronic ignition for fast starts
  • Cast-iron sleeves for longer engine life
  • Overhead valves for excellent power and fuel economy
  • Full-pressure lubrication and oil filter for keeping the oil cleaner for a long engine life and extending the time between oil changes; full-pressure lubrication is also more effective when operating the tractor on an incline
  • Excellent serviceability with easily replaced air filter, fuel filter, and oil filter and a convenient oil-drain hose to make draining the oil easy and clean
Cyclonic air filter
Air filter cover Air filter cover
Air filter with foam precleaner Air filter with foam precleaner

Cyclonic air-management system removes larger particles of dirt before they reach the air filter for reduced filter maintenance and longer engine life:

  • Cyclonic design ejects large dirt particles before they contact the filter.
  • Large, high-quality dry-type paper element air filter thoroughly cleans engine intake air.
  • The cover over the air filter is easily removed with two knobs for cleaning or replacement of the filter.
Serviceability
Engine oil check/fill tube and oil-drain hose Engine oil check/fill tube and oil-drain hose
Oil drain hose Oil drain hose

Engine oil check and fill tube is conveniently located for easy access. Oil drain hose makes draining oil easy and clean.


Engine oil filter Engine oil filter
Replaceable engine oil filter and fuel filter Replaceable engine oil filter and fuel filter

Replaceable oil filter and fuel filter are easy to access and change to minimize service time and cost.


Debris inspection port covers Debris inspection port covers
Debris inspection port Debris inspection port

Two debris inspection ports help ensure clean engine fins for optimum cooling. Bolts to open them are conveniently located under the air filter cover.

Flywheel alternator

A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:

  • 14-amp charging capacity
  • Regulated to keep the battery at full charge without risk of overcharging
Fuel tank has large, 3.3-U.S. gal. (12.5-L) capacity
Fuel tank Fuel tank
Electronic fuel gauge Electronic fuel gauge

Large fuel tank and convenient fuel gauge minimize the number of stops for fuel and chance of running out of fuel:

  • Fuel tank has a large, 3.3-U.S. gal. (12.5-L) capacity for more hours of operation between refills.
  • Large, 3-in. (7.6-cm) diameter fuel tank filler opening makes adding fuel easy.
    • Located on the left fender
    • Helps eliminate spillage
  • Electronic fuel gauge on the dash display allows the operator to easily monitor the amount of fuel in the tank.

48-in. (122-cm) Accel Deep™ (48A) Mower Deck cuts clean and is versatile

X394 with Accel Deep 48A Mower Deck X394 with Accel Deep 48A Mower Deck
Accel Deep 48A Mower Deck Accel Deep 48A Mower Deck

The 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:

  • 4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
    • Optional lever-action or electric one-touch MulchControl™ system provides superior mulching performance and versatility.
  • Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
  • Mower deck is suspended from the vehicle for a smooth and level cut
    • Adjustable mower wheels, positioned just above ground level, help reduce scalping 
  • 0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
  • Compatible with high-performance Power Flow™ material collection systems
  • For use on X330, X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and model year 2016 and newer X590 Tractors
Excellent cut quality
48A Mower Deck top (similar mower from X700 Series Tractor shown) 48A Mower Deck top (similar mower from X700 Series Tractor shown)
48A Mower Deck underside (similar mower from X700 Series Tractor shown) 48A Mower Deck underside (similar mower from X700 Series Tractor shown)

Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:

  • Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
    • Helps maintain excellent cut quality at faster mowing speeds
  • Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
  • Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.
  • Exact Adjust deck-leveling system allows for easy and accurate leveling of the mower deck.
Productivity - getting the job done fast
Right side of Accel Deep 48A Mower Deck Right side of Accel Deep 48A Mower Deck

Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:

  • Greatly improves mower's capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds

Large discharge opening is both high and wide to handle more material:

  • Gives a smooth, even discharge of clippings at all mowing speeds
  • Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
  • The 48A Power Flow blower has an inlet housing with over 50 percent greater area than the 48X Power Flow blower used on previous machines.
Cleanliness - for the mower and the operator
Accel Deep 48A Mower Deck Accel Deep 48A Mower Deck
Accel Deep 48A Mower Deck Accel Deep 48A Mower Deck

The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:

  • There are few places to catch and hold material on top and underneath the deck.
    • Top of deck stays cleaner, reducing time and effort needed for cleaning and service
    • Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
    • Less need to clean and remove buildup of material from underside deck
  • The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck:
    • Limited amount of material to drift onto the operator and mower deck
    • Even for material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
    • Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.

Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:

  • The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
Mower wash port Mower wash port
Mower wash port with hose connector Mower wash port with hose connector

A wash port is provided to make cleaning the underside of the mower deck easy.

  • Hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket with flip-up cover Spindle pocket with flip-up cover
Easy-to-adjust mower wheel and mower side reinforcement Easy-to-adjust mower wheel and mower side reinforcement

The 48A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:

  • Stamped from strong 10-gauge, 0.135-in. (3.4-mm) steel
  • Ribs in the deck shell add strength where it is needed
  • The 48A has a 23 percent heavier overall weight than the Edge™ Xtra 48-in. (122-cm) Mower Deck used on previous machines.

Mower wheels are heavy duty:

  • Provides greater strength and durability for longer, trouble-free life.
  • Setting wheels to the correct height for the cutting height quick and easy.

Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.

The 48A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.

Dual-stage E-coat and powder-paint coatings provide extra protection from rust.

Versatility - easy to change between side discharge, mulch, and bagging modes

The 48A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:

  • With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
  • The Power Flow rear bagger can be used with MulchControl by simply using the MulchControl lever or electric one-touch switch to move the mulch baffle to the side-discharge position.
7-bu (247-L) Power Flow rear bagger
Optional rear bagger Optional rear bagger
Power Flow blower Power Flow blower

An optional 7-bu (247-L) rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:

  • The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
  • The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:
    • 7-bu (247-L) capacity
    • Easy-to-attach Power Flow blower (ordered separately)
    • Easy-to-attach chute (ordered separately)
    • Air exhaust duct
    • Convenient spring-latch
    • Airflow fill indicator
    • Quik-Tatch mounting
    • Sealed hopper top
    • Loose-knit bags available

Larger 14-bu (493-L) and 19-bu (670-L) MCS are available, in addition to the 7-bu (247-L) MCS, for specific X300 and X500 Series Tractor models.

Mower blades

Side-discharge blades can be used with the Power Flow system when bagging.

Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging.

 

Mower blade use chart

Mode(s) of operation

Mower blade

Side discharging mode only 

Side-discharge blade (shipped with mower) 

Mulching mode only

Mulching blade (shipped with MulchControl)

Side discharge and mulching

Mulching blade (shipped with MulchControl)

Bagging

Either side-discharge or mulching blade

Four-year or 300-hour bumper-to-bumper warranty is standard

An exclusive 4-year or 300-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere X300 Series Tractors.

  • The warranty is hassle free, with one company handling all the paperwork.
  • Premium features of X300 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.

*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.

MulchControl™ system provides superior mulching performance and rapid conversion

Lever-action MulchControl lever (shown on 48A mower deck) Lever-action MulchControl lever (shown on 48A mower deck)
Electric one-touch MulchControl switch Electric one-touch MulchControl switch

The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • Creates a beautiful looking lawn
  • Smaller grass clippings disappear into the lawn canopy
  • Reduces fertilizer needs
  • Grass clippings are not blown onto the operator, driveways, or flower beds
  • No need to dispose of bags of clippings
How MulchControl works
MulchControl baffle open (shown on 48A mower deck) MulchControl baffle open (shown on 48A mower deck)
MulchControl baffle closed (shown on 48A mower deck) MulchControl baffle closed (shown on 48A mower deck)

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
  • The MulchControl handle, or an electric one-touch actuator, is on top of the mower deck and is used to open and close the MulchControl baffle.
  • When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
  • When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.

MulchControl is well-suited to the following mowing situations:

  • For operators who usually mulch, but side discharge when grass gets too long
  • For operators who usually side discharge, but would like to close the chute to control clippings in some areas
  • For operators who always mulch a main lawn, but often side discharge secondary lawns
  • For operators who collect clippings but want to go farther before emptying the material collection system

MulchControl puts the operator in control of the clippings.

 

Electric one-touch MulchControl

Electric one-touch MulchControl systems shift the MulchControl baffle using an electric actuator that is operated by a dash-mounted switch.

Electric one-touch MulchControl switcht Electric one-touch MulchControl switcht
Electric one-touch MulchControl actuator (shown on 42A mower deck) Electric one-touch MulchControl actuator (shown on 42A mower deck)

Operators can convert between modes without interrupting the mowing process, making it possible to change between modes:

  • When approaching driveways or flower beds where clippings would be undesirable
  • When a breeze blows clippings back onto the operator
  • For side discharge mowing only the areas of the property where grass is too thick for mulching
  • With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
MulchControl limitations

While in the side discharge mode, MulchControl still mulches about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean­up is desired
  • 42A Mower Deck requires a MulchControl baffle be removed to install the bagger chute

When bagging with MulchControl on a 48A or 54A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.

Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks Rear baffle (A) must be removed for bagging with MulchControl with 42A mower decks

When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.

MulchControl compatibility

Each MulchControl system is an optional field-installed attachment and includes everything needed: baffles, mulch blades, a handle (lever action attachments) or an actuator, wiring, and switches (electric one-touch attachments).

Lever-action MulchControl attachments
Attachment Description Applications
BUC10704 42-in. (107-cm) Accel Deep MulchControl (lever action) Model year 2016 and newer X300 Series Tractors, Z300 Series ZTrak™ Mowers
BUC10705 48-in. (122-cm) Accel Deep MulchControl (lever action) S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
BUC10706 54-in. (137-cm) Accel Deep MulchControl (lever action) Model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak Mowers
Electric one-touch MulchControl attachments
Attachment Description Applications
BUC10164 42-in. (107-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 Series Tractors*
BUC10165 48-in. (122-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 and X500 Series Tractors*
BUC10166 54-in. (137-cm) Accel Deep electric one-touch MulchControl Model year 2016 and newer X300 and X500 Series Tractors*

*NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Snow removal is a strength of lawn tractors

44-in. (112-cm) Front Blade 44-in. (112-cm) Front Blade
Snow blower, weather enclosure, and chains on an X300 Series Tractor Snow blower, weather enclosure, and chains on an X300 Series Tractor

An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.

Equipment available for snow removal includes:

  • 44-in. (112-cm) Snow Blower
  • 44-in. (112-cm) Front Blade
  • 48-in. (122-cm) Front Blade (X394 Tractor only)
  • Tire chains or TerraGrip traction belts
  • Weather enclosure (available for all X300 Series, except the X350R)
  • Weights

 

Steering is low-effort sector and pinion system

Tight turning radius Tight turning radius
Designed for easy turns Designed for easy turns

A heavy-duty sector and pinion steering system with quality bearings provides easy and precise control for the life of the tractor:

  • Small, 16-in. (40.6-cm) turning radius provides excellent maneuverability
  • Tight turning ability improves mowing efficiency
Easy steering

Easy steering is important for an enjoyable mowing experience:

  • Large, 14-in. (36-cm) diameter steering wheel for improved leverage
  • Large sector gear for improved (higher) steering ratio
    • A higher ratio equals lower steering effort
  • Dual drag links to help equalize the steering loads and reduce steering error
  • Ball joints on both ends of the steering tie rods for long life
  • Long steering arms to improve the mechanical advantage of the steering system through the full range of motion
  • Sector gear that pivots on a shaft rather than a bushing to ensure proper gear mesh and eliminate binding
  • Greaseable front steering spindles to reduce friction and improve wear over time

Integrated hydrostatic transaxle efficiently transmits power to wheels

Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370) Kanzaki® K46 transaxle (X330, X350, X354) Kansaki K57 transaxle (X370)
Kanzaki K58 transaxle (X380, X384, X390, X394) Kanzaki K58 transaxle (X380, X384, X390, X394)

The Tuff Torq® hydrostatic transaxle encloses the hydrostatic pump and motor rotator groups in the same housing with the differential and axle housings. This design is very efficient and reduces the number of sealing surfaces to minimize the potential for leakage.

Combined with the foot controls, the hydrostatic transmission functions similarly to that of an automatic transmission in an automobile, so the term automatic is often used to describe it:

  • Use of the latest valve designs has significantly reduced the sound level.
  • Large pump and motor rotating groups ensure long life and efficient operation.
Freewheeling valve
Freewheeling valve Freewheeling valve

A freewheeling valve control is conveniently located near the tractor rear hitch plate for good visibility and easy operation.

Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.

Controls and display functions are easy to identify and convenient to use

X350 Tractor mowing X350 Tractor mowing
Steering wheel and controls (switch turned on to show display) Steering wheel and controls (switch turned on to show display)
Controls

The contoured dash has clean, attractive styling and ergonomic controls for easy use:

  • Controls are color coded and labeled with English words for easy identification by the operator.
  • Controls are logically placed and easy to reach.
  • The power take-off (PTO) switch allows the operator to get fingers underneath it, like a T-handle, to pull up for easy activation.
  • The reverse implement option (RIO) switch is a yellow button.
  • The latch control on foot-lift models and hydraulic-lift control on power-lift models and the park brake latch are pivot levers for low effort.
  • Cruise control activation is handled by an automotive-style button.
  • Separate engine speed and choke controls make starting and warming up the engine easier in cold weather.
    • The choke lever is spring loaded to eliminate the chance the tractor will be unintentionally operated with the choke partially closed.
  • Functional design of the throttle and choke controls provides good appearance and a comfortable feel.
Display panel
Display panel Display panel
Display panel illustration with descriptions Display panel illustration with descriptions

Instrument display has the look and feel of a modern automobile. A power-up sequence cycles lights and gauges to indicate they are working:

  • Display features dark-cockpit design to minimize operator distractions.
  • Display is back lit for night visibility.
    • Night visibility is especially useful with snow blower use.
  • Hour meter makes it easy to tell when oil changes and other maintenance should be performed.
  • Electronic fuel gauge provides real-time fuel level information.
    • The X350R has a low fuel light, rather than a fuel gauge, to provide the operator with a noticeable warning when low on fuel.
  • A tachometer graphically displays engine speed.
    • Target-zone graphics inform the operator of the engine speed range to use for best cut quality.
  • An indicator tells the operator when the PTO is operating.
  • Bright caution and stop lights capture the operator's attention when important information is on the instrument cluster.
    • Damage can be prevented and repair costs can be reduced by addressing problems early.
  • Operators are advised of what the problem is if they attempt to operate the mower with unsatisfied PTO, seat, or park brake interlocks.
    • The indicators are also useful to identify the reasons the PTO or engine may have shut off when an interlock is unsatisfied.
  • Operators are advised if battery voltage is low, normal, or excessive.
  • The service indicator light illuminates to indicate a diagnostic error code is stored.
    • Onboard diagnostics provides trouble codes for use by trained technicians.
      • For example, a technician can test switch functionality and circuit continuity without tools.
Twin Touch™ foot control
Twin Touch foot control Twin Touch foot control
Cruise control Cruise control

Twin Touch foot pedals control the speed and direction of travel:

  • Automotive-type accelerator control ensures easy operation.
  • Operator can change direction without lifting foot off the platform.
  • Large pedal surface gives superior operator comfort.
Cruise control

Cruise control is standard equipment:

  • To engage, push the cruise-control button and hold until the foot is removed from the forward pedal.
  • For emergency stop, the cruise control can be released by pushing on the brake pedal or the forward pedal.
Mower deck height adjustment
Cut height adjusting knob Cut height adjusting knob

A rotary dial knob makes adjusting the mower cut height quick and easy:

  • Provides mower cut heights in 0.25-in. (0.64-cm) increments from 1 in. (2.5 cm) to 4 in. (10.2 cm)
  • Returns the mower deck to the same preset height each time it is lowered
Storage tray under tractor seat Storage tray under tractor seat
Exact Adjust tool is used to level mower deck Exact Adjust tool is used to level mower deck

Storage for the onboard deck-leveling gauge and the Exact Adjust tool is provided in the storage tray under the tractor’s seat:

  • Exact Adjust ports on the fender deck allow for easy and accurate leveling of the mower deck for optimum mowing performance.
Deck-leveling gauge placed under deck Deck-leveling gauge placed under deck

Deck-leveling gauge is placed at the appropriate location under the left rear, right rear, and front of the mower deck as the cut height is adjusted using the Exact Adjust tool and front draft arm adjusting nuts.

 

Foot-pedal lift system
Foot-pedal lift system Foot-pedal lift system

Pushing with the foot to raise the mower or implement is less strenuous for many operators than using a hand-lift lever:

  • The easy-to-use raised position lock operates similarly to the park brake lock.
  • The foot pedal is out of the way and not likely to catch on bushes and tree limbs when mowing.
  • The mower deck returns to the same preset height each time it is lowered.
Adjustable lift-assist spring
Lift-assist spring decals and adjusting bolt Lift-assist spring decals and adjusting bolt
Close-up of lift-assist spring decal Close-up of lift-assist spring decal

NOTE: The adjustable lift-assist spring is standard equipment on tractors with manual foot-lift system that are shipped with the 48-in. (122-cm) and 54-in. (137-cm) side-discharge mowers, and an option for tractors shipped with 42-in. (107-cm) mowers. It is a recommended option for foot-lift tractors sold with the 42-in. (107-cm) mulch mower.

  • Lift-assist spring is provided on tractors shipped from the factory with a 48-in. (122-cm) or 54-in. (137-cm) side-discharge mower deck, except models with hydraulic lift, and a recommended option for tractors equipped with a 42-in. (107-cm) mulch mower to minimize lift effort.
    • A spring-assist kit is available for other models for use with front equipment.
  • Lift effort can be easily adjusted by turning a bolt, located on the tractor front bumper, for optimum performance, depending on the equipment used (mower, front blade, snow blower, etc.).
  • The mower will not be inadvertently locked in the raised position when mowing through ditches.
  • When installing or removing a mower or front equipment raised by the foot-lift system, spring tension may be removed from the connection points by pulling rearward on the lift pedal and raising the lift latch to hold the pedal in the rearward position.
Parking brake control
Parking brake Parking brake

Depressing the brake pedal applies internal wet-disk brakes, which provide better reliability and longer life than external brakes, for safe stopping.

The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.

Electric PTO clutch is easy and convenient to use
Electric PTO switch Electric PTO switch

The heavy-duty electric PTO clutch is operated with a convenient dash-mounted switch.

Heavy-duty PTO clutch
PTO clutch PTO clutch

The PTO clutch is designed to operate through many on/off cycles.

RIO
Reverse implement switch Reverse implement switch
Mower engagement PTO switch Mower engagement PTO switch
Using RIO

CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:

  • Carefully check the area around the machine.
  • Disengage the mower before backing up.

NOTE: Operating the mower while backing up is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.

  1. Stop forward travel. Allow attachment to run.
  2. Look down and behind the machine to be sure that there are no bystanders.
  3. Push and hold in the reverse implement switch while depressing the reverse pedal slightly.
    NOTE: If the attachment stops while positioning the machine, return mower engagement (PTO) switch to off position. Repeat this procedure from the beginning.
  4. Release the reverse implement switch and reposition the machine as the machine begins to move rearward.
  5. Resume forward travel. The attachment should continue operating.
  6. Repeat procedure to position the machine again.

Frame is reliable heavy-duty welded steel

Welded, heavy-duty frame Welded, heavy-duty frame

The frame is made of heavy formed and welded steel, reinforced in critical areas for even greater strength:

  • The frame is formed from 12-gauge, 0.105-in. (2.66-mm) thick material for long life.
  • Standard front bumper and hitch plate are formed from 9-gauge, 0.15-in. (3.8-mm) steel and complete the frame assembly.
  • Rear hitch plate can support two 42-lb (19-kg) Quik-Tatch weights.
    • Weight bracket is built into the frame of two-wheel-steer models.
    • Four-wheel-steer models require the optional weight bracket.
Front axle and wheel spindles are heavy-duty
Cast-iron front axle Cast-iron front axle

Front axle is made of nodular cast iron:

  • Cast-iron front axle is strong and shock resistant.
  • Cast iron will not yield under heavy loads or impact.

A replaceable bushing is used at axle mounting:

  • The bushing provides excellent wear resistance.
  • Grease fittings at each spindle are easy to service.
Front steering spindles
Steering spindle Steering spindle

Front steering spindle diameter is 0.75 in. (19 mm) for strength and long life:

  • Have strength to handle heavy implements
  • Provide long life at bearing surfaces
  • Use sealed precision bearings in front wheels
Rear equipment-mounting system is heavy-duty and easy to use
Rear equipment mounting system Rear equipment mounting system

A heavy-duty equipment mounting system is used:

  • Includes strong frame mounts with a combination of mounting holes in the tractor hitch plate that accept pins or shoulder bolts to support heavy rear-mounted equipment
  • Easily attach optional equipment to the tractor
  • Can bear the load of heavy rear-mounted equipment, such as material collection systems

Modern styling with functional design enhances appearance and performance

Attractive styling Attractive styling
Hood air-intake louvers Hood air-intake louvers

Smooth, rounded contours present a modern, styled appearance:

  • Hood styling incorporates efficient full-length air-intake louvers on each side, rather than on the top.
    • Cooler engine operation
    • Lower operator station sound levels
  • Hot air is vented out the front grille, away from the operator.
  • The fully enclosed hood is made of molded-in-color material.
    • Reduces sound
    • Will not rust or dent
  • Distinctive grille and large, one-piece fender deck complete the styling package.
Two high-quality headlights give excellent visibility
Optimum lighting pattern Optimum lighting pattern

Headlights are standard equipment on all models:

  • Two 27-W bulbs provide excellent lighting for good visibility during evening operation.
  • A headlight position on the ignition switch makes it easy to operate the headlights.
  • The headlights are designed to provide an optimum lighting pattern for mowing and snow removal.

Operator station is comfortable and convenient

Operator station Operator station
Operator station Operator station

The operator station is designed for operator comfort and ease of using controls:

  • A large, 14-in. (36-cm) diameter steering wheel is comfortable to use and minimizes steering effort.
  • Full-length foot mats provide comfort for the operator and protect the footrest area.
Comfortable seat
Comfortable open-back seat Comfortable open-back seat

An open-back 15-in. (38-cm) high-back seat provides a comfortable, smooth ride and good support for the operator:

  • Seat travel of 6.6 in. (17 cm) with 15 positions allows the operator to be seated comfortably and easily operate the controls.
  • Seat can be easily adjusted fore and aft by the operator while sitting on the seat.
  • Open-back design allows air circulation to keep the operator's back cool and dry for a more comfortable ride.
  • Grasp at the top of the seat is conveniently located for use when tilting the seat up to protect it from the weather.
Adjustable seat suspension
Seat suspension with springs in rear position Seat suspension with springs in rear position
Seat suspension with springs in forward position Seat suspension with springs in forward position

The seat suspension is adjustable, without tools, for the weight of the operator:

  • Springs are adjustable fore and aft to any of three positions.
    • No tools required
    • Allows fine-tuning of the suspension for the operator's weight
    • Back position for more support for heavier operators
  • Tool tray is designed into the seat base.
    • Can be used to store gloves, small tools, etc.
    • Provides storage location for Exact Adjust tool and deck-leveling gauge
Cup holder and toolbox
Cup holder and covered toolbox on fender Cup holder and covered toolbox on fender
Covered toolbox with open cover Covered toolbox with open cover

A cup holder and covered toolbox are located on the fender for operator convenience:

  • The cup holder holds a variety of container sizes.
  • Toolbox provides convenient storage.
    • Toolbox cover snaps closed to provide protection for loose tools, cell phones, etc.
  • Cup holder and toolbox are constructed of durable acrylonitrile butadiene styrene (ABS) plastic.
Removable plug for optional 12-V outlet
Location for optional 12-V outlet Location for optional 12-V outlet

A removable plug on the console, in front of the operator, provides a convenient location for the optional 12-V outlet and makes installation easy.

  • Convenient for plugging in cell phone charger and other electric devices
    • Can be used to operate electric rear equipment, such as a sprayer or spreader
12-V fast connector
Fast connector location Fast connector location

A mid-vehicle, 12-V fast connector, located under the tractor’s fuse box, is included as standard equipment to reduce initial installation time for some attachments that operate on 12-V power from the tractor:

  • The four-cavity connector includes battery, ground, and key switch terminals and is turned on and off with the ignition switch.

Serviceability is convenient with easy-open hood

One-piece hood is easy to open One-piece hood is easy to open
Service interval decal located under hood Service interval decal located under hood

The one-piece hood opens easily to permit checking and servicing the engine:

  • Important service points are located within easy reach.
  • A service-interval decal is provided inside the tractor hood for convenience when servicing the tractor.
Easy-to-service engine fuel and oil filters Easy-to-service engine fuel and oil filters

The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.

 

Quick response (QR) codes link to owner information web pages
Example product identification number (PIN) label with QR code Example product identification number (PIN) label with QR code

John Deere riding lawn mowers are supported by owner information web pages that include links to:

  • Safety and how-to videos
  • Operator’s manuals
  • Parts catalog
  • Maintenance reminder sheets
  • Attachments
  • Warranty statements

To speed access to owner information web pages, a QR code is printed onto a PIN label located under the hood on trim side of the steering pedestal. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.

Exact Adjust ports and onboard deck-leveling tools make precise deck adjustments easy
Deck-leveling gauge and hex adjusting tool stored under tractor seat Deck-leveling gauge and hex adjusting tool stored under tractor seat
Exact Adjust access holes Exact Adjust access holes

A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable onboard deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.

Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.

The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:

  • There is no need to reach under the fender deck while making the mower-level adjustment.
  • Onboard deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
    • Level the mower deck side to side
    • Set the correct amount of rake (front-to-back deck orientation)
    • Calibrate the cutting height to the cut-height adjusting knob setting
  • Exact Adjust simplifies leveling the mower deck if equipped with a Power Flow™ blower.
    • To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.
Deck-leveling tool placed under deck Deck-leveling tool placed under deck
Using included ball-hex tool to level mower deck Using included ball-hex tool to level mower deck

Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:

  • Park the tractor on a level surface.
  • Inflate tires to the correct pressure.
  • Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.
Cut height adjusting knob Cut height adjusting knob
  • Set mower cutting-height knob to the correct deck-leveling position.
  • Adjust mower wheels as necessary so they do not contact the ground surface.
  • Remove the onboard deck-leveling gauge that is located under the seat.
  • Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points varies slightly between decks.
    • Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
  • Adjust mower deck front-to-back level, if necessary.
    • Loosen rear nuts equally on each side of front lift rod.
    • Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
    • Tighten rear nuts after adjustment is complete.
  • Return the gauge to its storage position. 

 

NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.

Help maintain your mower and lawn with the MowerPlus™ app and connector

MowerPlus home screen MowerPlus home screen
MowerPlus maintenance screen MowerPlus maintenance screen
Overview

Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.

Benefits
  • Engine hours, fuel level, and battery health (as compatible)
  • Mowing history with time, distance, area, and speed
  • Current day and five-day weather forecast based on location
  • Walk-through setup guides
  • Expert mowing tips
  • Useful attachments for future purchase
  • Periodic maintenance reminders
  • Safety instructions

 

To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.

MowerPlus Hour Meter Connector MowerPlus Hour Meter Connector
MowerPlus Deluxe Smart Connector, with a phone MowerPlus Deluxe Smart Connector, with a phone

Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.

 

BUC10510 MowerPlus Hour Meter Connector is for use with:

  • Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
  • Model year 2015 to 2020 S240 Tractors (serial number -880,000)
  • S100, S110, S140, and S220 Tractors

 

BUC10929 MowerPlus Deluxe Smart Connector is for use with:

  • All S120, S130, S160, S170, and S180 Tractors
  • Model year 2021 and newer S240 Tractors (serial number 880,001-)
  • Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)

 

BUC10537 MowerPlus Smart Connector is for use with:

  • Model year 2016 and newer Select Series X300 and X500 Tractors

 

All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.

 

MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.

 

Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Additional details

MowerPlus connectors (sold separately)

Specifications


Key Specs x330-lawn-tractor-48-in
Current Model
Engine power22 hp
16.4 kW
Oil changeNo-tools oil drain hose with replaceable filter
Engine manufacturer/model44J6 Cyclonic
Transaxle typeK46 hydrostatic integrated with transaxle
Transaxle controlTwin Touch™ pedals
Rear tires20x10-8
Lift system typeFoot pedal with adjustable spring assist
Cutting widthAccel Deep™ mower deck, 48 in.
122 cm
U.S. warranty4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Engine
Power22 hp
16.4 kW
Displacement44.2 cu in.
724 cc
Manufacturer/model44J6 Cyclonic
TypeOverhead valve, full-pressure lube, oil filter
CylindersV-twin, cast-iron liners
GovernorMechanical
Choke/speed controlSeparate levers, automatic choke return
Cooling methodAir
Air cleanerDry, replaceable
Oil changeNo-tools oil drain hose with replaceable filter
Fuel system
TypeGasoline
Fuel deliveryPulse pump, carburetor
Fuel gaugeGauge on dash
Fuel tank locationRear
Fuel fill openingOn left fender, 3 in.
7.6 cm
Fuel tank capacity3.3 U.S. gal.
12.5 L
Electrical system
Battery12 V
340 CCA
Charging systemFlywheel alternator, regulated, 14 amp
Engine starterBendix
Hour meterYes
HeadlightsTwo standard, incandescent, 27 W
Taillights or reflectorNo
Backup lightsNo
Rear work lightsNo
12-V outletOptional
Transaxle
TypeK46 hydrostatic integrated with transaxle
ControlTwin Touch™ pedals
Cruise controlYes, button on dash
Oil coolerFins and fan on transaxle
Oil filterInternal, not replaceable
Differential lockNo
Forward speed0-5.5 mph
0-8.9 km/h
Reverse speed0-4 mph
0-6.4 km/h
BrakesInternal wet disc
Chassis
FrameWelded heavy-duty
Primer/paintE-coat/powder
Weight bracketStandard rear, optional front
Receiver hitchNo
Front axleCast iron front axle, front wheel ball bearings
Spindle bushingsNo
Front tires15x6-6
Rear tires20x10-8
Hood materialFully enclosed, molded-in color material reduces sound, will not rust or dent
Fender deck materialStamped steel
Floor matsSure-grip rubber
StorageYes, under seat and covered toolbox
Service interval decalYes
Fender handles/gripsNo
Cup holderYes
Equipment mountingYes, heavy duty
Maximum towing capacity600 lb
272 kg
Steering
TypeManual, sector and pinion
Four-wheel steerNot available on this model
Steering wheelLarge, 14 in.
35.6 cm
Tilt steering wheelNo
Turning radius16 in.
40.6 cm
Uncut circle radius21 in.
53.3 cm
Seat
TypeOpen-back design with grasp
Seat back height15 in.
38 cm
ArmrestsNo
Fore-aft adjustmentWhile seated, slide rail, 15-position, 6.6 in.
17 cm
Seat suspensionTilt, two coil springs, three-position no-tools adjustment for operator weight
Lift system
TypeFoot pedal with adjustable spring assist
Hydraulic outletsNo
Mower cut height13 positions, 1-4 in.
2.5-10.2 cm
Cut height increments0.25 in.
0.64 cm
Preset cut heightYes
Mower deck
TypeSide discharge
Cutting widthAccel Deep™ mower deck, 48 in.
122 cm
ConstructionStamped steel deck shell
Mower deck material10 gauge
0.135 in.
3.4 mm
Mower wash portYes
Mower drive systemElectric power take-off (PTO) clutch, in-line belt
Mower wheelsFour
Mower wheel adjustmentSeven-position, spring-loaded pin
Mower level adjustmentExact Adjust ports and onboard deck-leveling gauge
Mower attachability
TypeRoll under tractor
Front draft armsAttached with spring pins at two points
Rear draft armsQuick-pull pins
Mower wheels rotateYes, 90 degrees for easy mower removal
Drive systemDual belt
Safety
Meets ANSI standardYes
Meets OPEI standardYes
Backup protectionReverse Implement Option (RIO)
Safety videoYes
Buyer's notes
NotesFully enclosed, molded-in color material reduces sound, will not rust or dent
Durable E-coat primer and powder-paint finish
Warranty4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional equipment
Mowers48A (standard)
Rear bagger2-bag, 7 bu
247 L
Powered material collectionPower Flow™ blower
Mulching systemYes, MulchControl™
Front thatcher38, 46, 54 in.
96.5, 116.8, 137.2 cm
Front blade44 in.
111.8 cm
Snow blowerTwo-stage, 44 in.
111.8 cm
SprayerTow-behind, 15 U.S. gal.
56.8 L
Tow-behind, 25 U.S. gal.
94.6 L
Mounted, 25 U.S. gal.
SpreaderTow-behind, 125 lb
57.7 kg
Tow-behind, 175 lb
79.4 kg
Mounted 125 lb
Front bumperStyled bumper option
Brush guardYes
Weather protectionWeather enclosure
Sun canopyYes
Bucket holderYes, double bucket
Grass stripingLawn striping kit
Tractor shovel40 in.
101.6 cm
Tow-behind tools16
Dimensions
Height46.1 in.
1171 mm
Overall length71.5 in.
1817 mm
Wheelbase49.4 in.
1255 mm
Width with mower62.6 in.
1590 mm
Width with mower (deflector raised for storage)52.6 in.
1335 mm
Width without mower38 in.
964 mm
WeightMower, no fuel: 606 lb
275 kg

Accessories and Attachments

Carts

7P Poly Utility Cart7P Poly Utility Cart
#

Every owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

7P Poly Utility Cart7P Poly Utility Cart
  • The cart has a premium molded, high-density polyethylene box construction.
  • Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.
  • Polyethylene body will not rust or dent; it stays looking new longer.
  • 0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.
  • Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.
  • Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.
  • Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.
  • Styling is compatible with other John Deere equipment.
  • Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.
Wheels
7P Utility Cart wheel7P Utility Cart wheel
#

Wheels are mounted on a solid, one-piece axle for durability.
 
Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.

The pneumatic tires offer the following:

  • Good flotation
  • Minimal rolling resistance
  • Shock absorption
Sloped tailgate
Sloped tailgate for easy emptyingSloped tailgate for easy emptying

A sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.

Tractor hitch
Spring-pin tractor hitchSpring-pin tractor hitch

A large-diameter hitch pin provides plenty of strength:

  • Fast, easy attachment to the tractor hitch
  • Spring pin to ensure the pin stays in place
Tilt latch
Tilt latchTilt latch

An easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

7P Poly Utility Cart
Order number: LP21935

Oilite is a trademark of Beemer Precision, Incorporated.

8Y Convertible Poly Utility Cart, push mode8Y Convertible Poly Utility Cart, push mode
8Y Convertible Poly Utility Cart, tow-behind mode 8Y Convertible Poly Utility Cart, tow-behind mode

The 8-cu-ft (0.23-m3), 300-lb (136-kg) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.

Key features include:

  • Compatible with riding lawn tractors and garden tractors
  • Durable poly construction
  • All-terrain pneumatic tires
  • Converts from tow cart to push cart without tools
  • Large handle is provided for ease of use

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.
 
NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck. 

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

8Y Convertible Poly Utility Cart
Order number: LP22755

Oilite is a trademark of Beemer Precision, Incorporated.

10P Poly Utility Cart10P Poly Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart.


Utility carts can be used to haul a variety of materials:

  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes

The 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:

  • Large 650-lb (295-kg) capacity
  • 10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bed
  • Will not dent or rust
  • 15x6 tubeless pneumatic tires with turf tread for maximum traction
  • Easy, hands-free foot pedal dump release
  • Steep dump angle for complete emptying

 

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

 

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

10P Poly Utility Cart
Order number: LPPCT10JD

Oilite is a trademark of Beemer Precision, Incorporated.

13 Steel Utility Cart 13 Steel Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Welded boxWelded box

Welded box construction provides maximum reliability:

  • Requires less setup time than the bolted construction.
  • Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.
Wheels and tires

Wheels are mounted on a solid, one-piece axle for durability.

Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.

Pneumatic tires offer:

  • Good flotation
  • Minimal rolling resistance
  • Shock absorption

Turf-tread tires are used on the 13 Utility Cart.

Deluxe tailgateDeluxe tailgate

Deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

Easy hookup and tilt-dump latch
Spring-pin tractor hitchSpring-pin tractor hitch
Tilt-dump latchTilt-dump latch

A large-diameter hitch pin provides plenty of strength:

  • Fast, easy attachment to the tractor hitch
  • Spring pin to ensure the pin stays in place

The easy-to-use latch allows tilting the bed for easier unloading:

  • Steep dump angle makes emptying easier.
Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear

 

Ordering information

Please contact a local John Deere dealer for availability and pricing information.

13 Utility Cart
Order number: LPHDC13JD

Oilite is a trademark of Beemer Precision, Incorporated.

16YS Swivel Cart16YS Swivel Cart

The 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart.

 

Key features include:

  • Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants
  • 800-lb (363-kg) capacity makes it durable enough for the heavy jobs
    • 350 lb (158 kg) when using swivel feature to dump
  • Convenient foot pedal release for easy dumping
  • Molded stake pockets for enlarging the bed size

NOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump.

 

Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

 

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

16YS Swivel Cart

Order number: LP68186



Oilite is a trademark of Beemer Precision Incorporated.

17P Utility Cart17P Utility Cart

Every owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.


Utility carts can be used to haul a variety of materials:

  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

 

Key features of the 17P Utility Cart:

  • 1,000-lb (454-kg), 17-cu ft (0.48-m3) load capacity.
  • Cart has premium molded polypropylene box construction.
  • Polypropylene body will not rust or dent, staying new-looking longer.
  • 0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.
  • Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.
  • Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.
  • Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.
  • Styling is compatible with other John Deere equipment.
  • 16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.
  • Wheels are mounted on a solid one-piece axle.
  • Wheels turn on iron/Oilite® bushings with grease fitting for long life.
  • Spring-loaded dump latch is easy to use.

A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear
Ordering information

Please contact a local John Deere dealer for availability and pricing information.

 

17P Utility Cart
Order number: LPPCT17JD

Oilite is a trademark of Beemer Precision Incorporated.

18 Utility Cart 18 Utility Cart

Everyone who owns a John Deere riding lawn and garden product is a potential user of a high-quality affordable utility cart.

Utility carts can be used to haul a variety of materials:

  • Firewood
  • Lawn debris
  • Sand
  • Dirt
  • Mulch
  • Garden tools
  • Plants and bushes

Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.

Durable box design
Bolt-together boxBolt-together box

Durable 18-gauge, 0.05-in. (1.2-mm) (10S) or 16-gauge, 0.06-in. (1.5-mm) (16S) steel components are bolted together.

 

Recessed bolts are used in the bottom of the box, so they will not interfere with emptying the cart.

Convenient emptying of box
TailgateTailgate

The deluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.

 

Model comparison chart

Comparison with similar models

ModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility
7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series
8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series
10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series
13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series
17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series
21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series

*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Specifications

 

 

7P

8Y

10P

13

16YS 

17P

18

21

Box capacity
Heaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)

17 cu ft (0.48 m3)

17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)
Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)

15 cu ft (0.42 m3)

14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)
Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)
Box dimensions 
Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)

58.5 in. (148.6 cm)

58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)
Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)

15.5 in. (39.4 cm)

15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)
Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBolted
MaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steel
TailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-out
Pneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 ply
Size13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8
Tread designTurfKnobbyTurfTurfTurfTurfTurfTurf
Recommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)
Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealed
Grease fittings on wheelsYesNoneYesYesYesYesYesNone
Axle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)

0.75 in. (1.905 cm)

0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)
Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)

14.25 in. (36.2 cm)

14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)
Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)

39.5 in. (100.3 cm)

39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)
Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clip
Dump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degrees
Maximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)
Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)
Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)

*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).

**HDPE is compression molded for optimum thickness in all areas and maximum durability.

Ordering information
Please contact a local John Deere dealer for availability and pricing information.

18 Steel Utility Cart
Order number: LPHDC18JD

Oilite is a trademark of Beemer Precision, Incorporated.

Tractor compatibility and requirements

Utility Carts

Chart below shows vehicle compatibility.

An X indicates cart can be used with the pulling unit.

NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.

 

 7P8Y10P1316YS 17P1821
EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665
ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740R
X X     
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
X XXXXXX 
S240XXX XXX 
LT150, LT160, LT180, LT190, LTR180XXX XX  
LX280, LX280AWS, LX289XXX XX  
X300, X300R, X304, X310, X320, X324, X340, X360,
X330, X350, X350R, X354, X370, X380, X384, X390, X394
XXX XXX X 
SST15, SST16, SST18XXX     
G110XXXXXX  
GT235, GT245XXXXXX  
GX255, GX335, GX345, GX355XXXXXX  
X500, X520, X530, X534, X540
X570, X580, X584, X590
XXXXXX 
X465, X475, X485, X495, X575, X585, X595XXXXXXXX
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758
XXXXXXXX

For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:

  

Tractor Additional weight
L100, L108, L110, L111, L118, L120, L130
102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180
Two 30-lb (14-kg) wheel weights, front
Two 42-lb (19-kg) suitcase weights, rear
S240Two 34-lb (15-kg) wheel weights, front
(4) 42-lb (19-kg) suitcase weights, rear
LT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, front
Two 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)
LX280, LX280AWS, LX289
X300, X300R, X304, X310, X320, X324, X340, X360
X330, X350, X350R, X354, X370, X380, X384, X390, X394
Two 34-lb (15-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, rear
SST15, SST16, SST18One 88-lb (40-kg) weight kit, front
Three 40-lb (18-kg) weights, rear
G100Two 50-lb (23-kg) wheel weights, rear
Two 42-lb (19-kg) suitcase weights, rear
G110Two 50-lb (23-kg) plastic shell rear wheel weights
GT235, GT245Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
GX255, GX335, GX345, GX355
X500, X520, X530, X534, X540
X570, X580, X584, X590
Two 30-lb (14-kg) wheel weights, front
Four 42-lb (19-kg) suitcase weights, front
Four 42-lb (19-kg) suitcase weights, rear
Four 50-lb (23-kg) wheel weights, rear
Two 50-lb (23-kg) wheel plastic shell weights, rear

X465, X475, X485, X495, X575, X585, X595
X700, X720, X724, X728, X729, X740, X744, X748, X749
X710, X730, X734, X738, X739, X750, X754, X758

Four 42-lb (19-kg) suitcase weights, front
Two 70-lb (32-kg) wheel cast-iron starter weights, rear
Four 50-lb (23-kg) cast-iron wheel weights, rear
Two 50-lb (23-kg) plastic shell wheel weights, rear
Six 42-lb (19-kg) suitcase weights, rear

Drawbar

1-7/8-in. (48-mm) hitch ball1-7/8-in. (48-mm) hitch ball

1-7/8-in. (48-mm) hitch ball attaches to drawbar or rear hitch to allow towing. 0.75-in. (19-mm) diameter post thread is provided.  

 

The hitch ball is available through Parts.

Magnetic hitch pinMagnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Home Maintenance Kits

Typical home maintenance kitTypical home maintenance kit

Home maintenance kits are a handy and convenient way for dealers to supply an owner with the maintenance-interval parts as specified in their operator's manual.

 

The LG277 home maintenance kit includes the following:

 

 Quantity

 Description

 1

 Engine oil filter

 2

 Engine oil quart

 1

 Fuel filter

 1

 Air filter cartridge

 2

 Spark plug

Mcs Chutes

Power Flow chute and blowerPower Flow chute and blower
Hopper, chute, and blowerHopper, chute, and blower

The Power Flow chute is required, along with the high-performance Power Flow blower, to use the 2-bag Power Flow material collection system. The chute includes a convenient handle and a fill indicator that tells the operator when the bags are getting full.

One chute works with several vehicle applications. Trim lines on the chute are referenced in the instructions so the chute can be cut to the proper length for the vehicle/mower application.

Mcs Hoppers

7-bu (247-L) hopper (cut-and-throw)7-bu (247-L) hopper (cut-and-throw)
7-bu (247-L) hopper (Power Flow™)7-bu (247-L) hopper (Power Flow™)

The 7-bu (247-L) hopper provides an efficient means of collecting grass clippings and leaves using either the cut-and-throw rear bagger or the Power Flow material collection system (MCS):

  • 38-in. (97-cm) and 42-in. (107-cm) mower decks use the cut-and-throw system.
  • 48-in. (122-cm) and 54-in. (137-cm) mower decks use the Power Flow system.

The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags.

The 7-bu (247-L) MCS features:

  • 7-bu (247-L) capacity
  • Easy-to-attach lower chute (ordered separately)
  • Handle on chute
  • Air exhaust duct
  • Convenient spring-latch
  • Airflow fill indicator
  • Quik-Tatch mounting
  • Sealed hopper top
  • Loose-knit bags available
Loose-knit bagsLoose-knit bags
Close-up view of loose-knit bag materialClose-up view of loose-knit bag material

A loose-knit bag is available as an option for use with 7-bu (247-L) cut-n-throw rear baggers and Power Flow™ baggers:

  • Two loose-knit bags are required.
  • The loose-knit bag allows more air to flow through and provide more complete bag filling in wet and heavy grass conditions.
Dump from the seat capability for X300 Series Tractors
MCS 7MCS 7
#

The MCS 7 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere X300 Series Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.

The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere MCS, installation is a breeze with simple hand tools.

 

Features:

  • Lightweight aluminum construction
  • Designed for full material expulsion
  • Easy access self-latching spring tripped handle
  • Ships almost fully assembled (5 minute handle assembly)
  • Installs in seconds (after initial assembly)

Benefits:

  • Easy - Convenient Access to dump handle directly from seat 
  • Clean - No material handling, no mess 
  • Efficient - Unload and go without leaving the seat 

NOTE: Fits John Deere X300 Series 2-bag material collection systems. Not compatible with EZtrak Zero-Turn Mowers or the X300R Rear Discharge Tractor.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

MCS 7 attachment
Order number: LP47168

Mcs Power Flow Blowers

HP Power Flow blower assemblyHP Power Flow blower assembly

The high-performance (HP) Power Flow blower assembly for the 48-in. (122-cm) Accel Deep™ Mower is used with the hopper and chute to provide a very effective material collection system. A hopper and chute must be ordered separately to complete this material collection system.

Miscellaneous

12-V outlet12-V outlet

The 12-V outlet kit can be installed on the tractor to provide power for various 12-V equipment.

Tractor shovel in raised positionTractor shovel in raised position
Tractor shovel in emptying positionTractor shovel in emptying position

The 40-in. (102-cm) Tractor Shovel expands the usefulness of any John Deere Select SeriesTM X300 or X500 Multi-Terrain Tractor by allowing it to pick up and move material. It utilizes a high-capacity electric actuator that provides lift, lower, dump, and down force functions. No front blade is required.

The tractor shovel takes the back-breaking labor out of jobs like moving mulch, spreading gravel, ground grading, and more. It installs using the tractor's existing frame holes. After initial installation, it can be removed or installed without tools.

The innovative opening design of the tractor shovel, combined with the lift height, assures complete emptying of material. The tractor shovel can also be used for scraping and grading by locking the shovel in the raised position.

Tractor recommendations and requirements:

  • Rear tractor ballast recommended for improved traction
  • Tire chains recommended for moving snow
  • No tractor requirements

 Key features:

  • Can be used when upper part of shovel is locked in the raised position as a blade (without angling capability)
  • Raised and lowered with electric actuator
  • Provides down force to increase scraping effectiveness of blade
  • Pick-up, transport, and empty a variety of loose material including soil, gravel, mulch, and snow
  • Can be removed in 10 minutes or less

Compatibility:

  • LP63767 40-in. (102-cm) Tractor Shovel is Compatible with:
    • Select Series X300, X300R, X304, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
    • Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

 

Unique shovel design
40-in. (102-cm) Tractor Shovel (with optional brush guard)40-in. (102-cm) Tractor Shovel (with optional brush guard)
Shovel opens for emptying material or bladingShovel opens for emptying material or blading

The unique design of the 40-in. (102-cm) Tractor Shovel allows an operator who has a Select Series™ X300 Series (including X300R and X350R) or X500 Series Multi-Terrain Tractor to use the tractor shovel for lifting and moving material as well as for typical blade functions (without blade angling), such as blading, leveling, and scraping:

  • Unique shovel design empties material completely.
  • Shovel can be locked in the raised position for blading applications.
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tractor Shovel
Order number: LP63767

Tractor compatibility and requirements

The 40-in. (102-cm) Tractor Shovel is compatible with the following tractors:

  • Select Series X300, X300R, X304, X310, X320, X324, X330, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
  • Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Requirements and/or recommendations:

  1. Rear ballast is recommended for best performance.
  2. Tire chains are helpful and recommended when operating in snow.
Operation
Operator station viewOperator station view
Control panelControl panel

The tractor shovel is operated from the tractor seat with the use of a control rod and an electric switch.

Electric actuator powers the tractor shovelElectric actuator powers the tractor shovel

An electric actuator provides power to raise, lower, and empty the shovel.

To raise or lower the tractor shovel, use the electric switch on the tractor shovel panel.

Depress the bottom of the switch to raise the shovel and depress the top of the switch to lower the shovel.

Control rod for opening/closing of the shovelControl rod for opening/closing of the shovel
Shovel in dump positionShovel in dump position

To open the shovel for emptying, raise it completely and then pull the control rod to the yellow area of the rod and press the upper end of the electric switch.

To close the shovel, press the lower end of the electric switch until the control rod releases to the black area of the rod.

Operation of the shovel for blading or leveling
Hand lift for locking into the blading positionHand lift for locking into the blading position
Blading latch in the locked position Blading latch in the locked position

To use the tractor shovel for blading, use the handle on the right side of the shovel to raise it and then use the locking lever to lock it in the raised position.

 Specifications

 

Length of tractor shovel

40 in. (101.6 cm)

Depth of tractor shovel

11 in. (27.9 cm)

Capacity

1.7 ft3 (48 L)

Cutting blade material

0.250-in. (6.4-mm) hardened steel

Material thickness, shovel

0.125 in. (3.2 mm)

Load capacity

150 lb (68 kg), evenly distributed

Lift height

4 in. to 6 in. (10.2 cm to 15.2 cm), depending on the tractor model

Shipping weight

110 lb (50 kg)

Warranty

One-year limited warranty on parts

Battery chargerBattery charger

This fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:

  • Automatically determines if the battery is 6- or 12-V and adjusts accordingly
  • Helps maintain battery in good condition and ensures it is fully charged
  • Powers on to charge battery and powers off when fully charged
  • 'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles
  • 1.5-amp trickle charges small batteries in 2 to 12 hours
  • Maintains large battery charges
  • Hookup protection guards battery and charger from damage 

 

Includes a choice of battery connection methods:

  • Standard color-coded clips to connect to any battery
  • Cable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use
Double bucket holder (buckets ordered separately)Double bucket holder (buckets ordered separately)

Transporting mulch, plants or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Ultimate™ Series Tractor. It is designed to carry up to 70 lb (32 kg) of material.

 

For use with standard 5-gal. (19-L) buckets - ordered separately. 

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (double)
Order number: LPJD301

Bucket (5-gal.)

Order number: LPJD400 (2 required)

Double bucket holderDouble bucket holder

Transporting mulch, plants, or debris is easier with the double bucket holder. Just attach the holder bracket to the rear of any Select Series™ X300, X500 Series Multi-Terrain, or X700 Series Tractor. It is designed to carry up to 70 lb (32 kg) of material for transporting mulch, plants, yard waste, or for adding ballast.

For use with the included John Deere 5-gal. (19-L) buckets.

NOTE: May not fit all tractor models with a weather enclosure or cab installed.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket holder (double) with buckets
Order number: LPJD301W

5-gal. (19-L) bucket5-gal. (19-L) bucket

This black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Bucket - 5 gal. (19-L)
Order number: LPJD400

8-oz (237-mL) Fuel-Protect gasoline stabilizer8-oz (237-mL) Fuel-Protect gasoline stabilizer

John Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round: 

  • Has corrosion preventers
  • For lawn and garden equipment and other gasoline-powered vehicles
  • Ensures quick starts in all two- and four-cycle engines
  • Use in gasoline, gasoline-oil mixture, and ethanol blends
  • Use to treat gas cans at each fill-up or use at every fill-up of vehicle
  • Keeps fuel fresh for 12 months
  • Contains a fuel injector and carburetor cleaner
  • 1 oz (29.6 mL) treats 2 gal. (7.6 L)

Always use fuel stabilizer in gasoline.

Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit JDParts.

Helpful tips:

  • Add fuel stabilizer every time fuel is purchased.
  • Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.
  • John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.
  • Use plastic fuel containers to store fuel; ask a local John Deere dealer.
  • For best results, use a spill-proof gas can that automatically seals the gas can vent.
  • Store fuel in a cool, dry, dark place in a sealed fuel can.
  • Fill tank to the top every time the machine is put away.
    • Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.

Please refer to the operator’s manual for additional recommendations and warranty information.

Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine. 

For more information on fuel, visit John Deere Groundscare.

Smart connectorSmart connector

The John Deere MowerPlus smart connector wirelessly links a Select Series X300 or X500 Tractor to the MowerPlus app on a mobile device:

  • No tools are needed for installation.
  • Detailed set-up instructions are included.
  • The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
  • The wireless connector and app work together to offer helpful information.

 

Tractor features available for viewing on the MowerPlus app include:

  • Tractor engine hours automatically synchronized to the app
  • In-app maintenance reminders and log, based on engine hours
  • Fuel level - even when away from the tractor, the app remembers information, like the fuel level, from the last synchronization.
    • When thinking ahead about Saturday morning mowing, the operator can make sure the tractor is fueled and ready to go.
  • Help to determine the best time to mow
  • Expert pre-mow optimization tips
  • Maintenance walk-through instructions

 

The operator is able to visit their device’s app store to see new app features as they are added.

Since the smart connector communicates instrument cluster information, future app releases will be able to provide additional operating recommendations and notifications.

MowerPlus smart connector (BUC10537) for Select Series X300 and X500 Tractors
Smart connector, wiring harness, and twist tiesSmart connector, wiring harness, and twist ties

One end of the wiring harness plugs into the back of a Select Series X300 or X500 Tractor instrument cluster. The other ends plug into the smart connector and the tractor's wiring harness.

Compatibility and requirements

MowerPlus smart connector (BUC10537) is for model year 2016 and later Select Series X300 and X500 Tractors.

Requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store. This operating system version is required:

  • Android™ 5.1 or higher
  • iOS® 10 or higher

NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.

Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Seat net kitSeat net kit

Seat net kit provides a convenient storage area for gloves, and other small items. It is available for open-back seats.

Compatibility kit partsCompatibility kit parts
Updates a model year 2006-2015 44-in. (112-cm) Snow Blower, 47-in. (119-cm) Snow Blower, or 48-in. (122-cm) Front Blade for use on a model year 2016 Select Series™ X300 or X500 Mult-Terrain Tractor.

Mower Blades

Side-discharge blade/mulching bladeSide-discharge blade/mulching blade
 
Side-discharge blade/mulching bladeSide-discharge blade/mulching blade
 

Mower Decks

Dry-condition kit componentsDry-condition kit components
Dry-condition kit installed on mower deckDry-condition kit installed on mower deck

The BM26238 dry-condition kit, 48A is available for 48A Accel Deep Mower Decks used on S240 Tractors, model year 2016 and later X300 and X500 Select Series™ Tractors and Residential ZTrak™ Mowers. The 48A dry-condition kit will also work with any X700 Signature Series Tractor (model year 2013 and later) that is equipped with a 48A Mower Deck.

The dry-condition kit will reduce the amount of blowout around the mower deck when side discharging, mulching, or bagging in dry grass and leaf conditions. For optimum mowing performance in lush-grass conditions, the dry-condition kit baffles may be removed.

Similar grass groomer shown - top viewSimilar grass groomer shown - top view
Similar grass groomer shown - side viewSimilar grass groomer shown - side view
Features and benefits
  • Homeowners can now achieve results just like the professionals
  • Brush is easy to adjust for varying mower cutting height
  • Brush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turf
  • The brush striping kit is a very economical and functional attachment

Compatible with the following:

  • 48A or 54A - 48-in. (122-cm) or 54-in. (137-cm) Side-Discharge Mower for X350, X354, X370, X380, X384, X390, X394, X570, X580, X584, and X590 (model year 2016) Tractors
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

48A or 54A - 48-in. (122-cm) and 54-in. (137-cm) grass groomer

Order number: LP63761

Mower deck leveling gaugeMower deck leveling gauge

Leveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.

Can be used for:

  • Lawn tractors
  • Lawn and garden tractors
  • Riding mowers
  • Front mowers
  • Commercial walk-behind mowers
  • Zero-turn-radius mowers

Mulch Kits

MulchControl advantages and benefits
Z535M ZTrak™ with Accel Deep 48A MowerZ535M ZTrak™ with Accel Deep 48A Mower
X730 Tractor with 48A Mower DeckX730 Tractor with 48A Mower Deck

The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:

  • A beautiful looking lawn
  • Grass clippings not blown onto the operator, driveways, or flower beds
  • Less fertilizer use
  • Elimination of the effort needed to dispose of clippings
How MulchControl works
MulchControl baffle open (similar mower from X700 Series Tractor shown)MulchControl baffle open (similar mower from X700 Series Tractor shown)
MulchControl baffle closed (similar mower from X700 Series Tractor shown)MulchControl baffle closed (similar mower from X700 Series Tractor shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
    • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
    • When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl limitations

While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean-up is desired
MulchControl baffle closedMulchControl baffle closed
MulchControl handleMulchControl handle
  • The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
    • The operator is required to get off of the machine in order to engage or disengage mulch mode.
  • Changing from mulching to side discharging or vice versa takes only a few seconds.

MulchControl is well-suited to the following mowing situations:

  • Usually mulch, but side discharge when grass gets too long
  • Usually side-discharge, but would like to be able to close the chute to control clippings
  • Always mulch a main lawn, but often side discharge secondary lawns
  • Bag clippings, but want to go farther before emptying bags
    • With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.

MulchControl advantages and benefits
Mower equipped with electric one-touch MulchControlMower equipped with electric one-touch MulchControl
MulchControl switchMulchControl switch

The 48-­in. (122­-cm) electric one-touch MulchControl attachment enhances versatility and productivity. A mower deck equipped with electric one-touch MulchControl not only does an excellent job of mowing and mulching, but it can also be quickly converted to side discharge or mulch mode with the touch of a switch:

  • Easily converts while mowing from side discharge mode to mulch mode or vice versa
  • In mulch mode, controls clippings dispersion in unwanted areas (driveways, landscape beds, near buildings, windows, parking lots, etc.)
  • Reduces cleanup time needed to dispose of clippings
  • Will reduce the amount of material entering a material collection system because, even in the side discharge mode, MulchControl will mulch about one third of the material because of the additional baffles under the mower deck
How electric one-touch MulchControl works

A tractor equipped with the electric one-touch MulchControl attachment delivers unprecedented levels of productivity and versatility. A convenient, dash-mounted switch provides operators the ability to change between side discharging and mulching. A heavy-duty baffle opens and closes easily with the touch of the dash-mounted switch.

MulchControl electric switchMulchControl electric switch
MulchControl electric actuatorMulchControl electric actuator

A dependable electric actuator is used to close and open the discharge baffle. The mower deck can easily be converted from side discharge mode to mulch mode or vice versa in a few seconds by activating the switch.

MulchControl baffle open (similar mower deck shown)MulchControl baffle open (similar mower deck shown)
MulchControl baffle closed (similar mower deck shown)MulchControl baffle closed (similar mower deck shown)

MulchControl is an innovative, simple design that is easy to use and maintain:

  • The MulchControl attachment includes baffles to control the flow of material under the deck.
    • The MulchControl baffle, or divider, between the left and middle spindles is about halfway down. The height is designed to balance the mulch and side discharge modes.
    • When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
    • When the MulchControl baffle is closed, this material stays within the deck and gets chopped into mulch and deposited in the turf.
  • The MulchControl electric switch is located on the tractor dash to open and close the discharge baffle.
    • The operator is not required to get off of the machine in order to engage or disengage mulch mode.

MulchControl is well suited to the following mowing situations:

  • For operators who usually mulch, but side discharge when grass gets too long
  • For operators who usually side discharge, but would like to be able to close the chute to control clippings
  • For operators who always mulch a main lawn, but often side discharge secondary lawns
  • For operators who bag clippings, but want to go farther before emptying bags (48A and 54A Mower Decks only)

MulchControl puts the operator in control of the clippings. The operator can have all the benefits of mulching with the ability to easily change to side discharging or bagging when desired.

With electric one-touch MulchControl, operators can convert between modes without interrupting the mowing process, making it practical to change between modes as conditions require:

  • When approaching clean areas like driveways or flowerbeds where clippings would be undesirable
  • When a breeze might blow clippings back onto the operator
  • For side discharge mowing only the areas of the property where grass is too tall or thick for mulching
  • With 48A and 54A Mower Decks, for collecting only the areas of the property where grass is too tall or thick for mulching
    • With 48A and 54A Mower Decks, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower will run without material when the baffle is closed.
    • Models equipped with a 42A Mower Deck require a MulchControl baffle be removed to install the bagger chute; see 42A versatility explanation for more information.

Advantages of MulchControl include:

  • Performance is improved.
    • Mulching is beneficial because it returns the clippings to the ground as fertilizer, which promotes lawn growth.
    • Clippings are much smaller, which allows them to fall into the grass and be removed from view.
    • Unsightly grass clippings are not blown onto driveways or into flower beds.
    • Fertilizer use is reduced and provides associated environmental benefits.
  • Uptime is increased.
    • Operators can convert quickly between modes, making it possible to change between mulching and side discharging as conditions require.
    • Mulching heavy, thick material can significantly reduce mower productivity. The ability to switch from mulch to side discharge mode ensures productivity, especially in grass too tall or thick to mulch effectively.
  • Cost of operation is reduced.
    • Controlling clipping dispersion reduces cleanup time.
MulchControl limitations

While in the side discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side discharge mode is essentially a partial mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:

  • When cutting strong southern grasses, such as Zoysia and Bermuda
  • When cutting in wet, high growth conditions, such as those found in the Pacific Northwest United States
  • When optimum bagging and lawn clean­up is desired
Compatibility

This electric one-touch MulchControl attachment is field installed and compatible with any 48A Mower installed on an X300 or X500 Select Series Tractor.

NOTE: Model year 2016-2017 X300 and X500 Series Tractors (X300 serial number 10,001-50,000 and X500 serial number 110,001-130,000) require replacing the tractor wiring harness and dash panel to use an electric MulchControl attachment.

Protection

Brush guardBrush guard

The brush guard adds a distinctive appearance to the tractor and protects the front of the tractor from damage.

Brush guard lowered to permit opening hoodBrush guard lowered to permit opening hood

By removing one spring clip and pin, the brush guard may be lowered to permit opening the hood.

Front bumperFront bumper

The front bumper adds a distinctive appearance to the tractor and protects the front of the tractor from damage.

Features include:

  • Bumper can be easily mounted to the front of the tractor.
  • Bumper can remain on the tractor when the front blade or snow blower are used.
Protective cover (large deluxe)Protective cover (large deluxe)

Cover provides heavy-duty protection for Select Series™ X300, X500, and X700 Tractors.

Features include:

  • Wipe-clean reinforced bottom around mower deck
  • Easy-on side handles makes snugging down cover a snap
  • Dual reinforced air vents let air circulate and help prevent ballooning in wind
  • Interior lining and integrated muffler heat shield
  • Heavy-duty fabric will not shrink or stretch and is coated for maximum water resistance
  • Easy-on split back for fast fitting and easy access after installation
  • Handy storage pocket reverses into an attractive storage case
  • Two-year warranty
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Protective cover (large deluxe)

Order number: LP93647

Protective cover (standard)Protective cover (standard)
#

Features include:

  • Dual vents let air circulate and help prevent ballooning in wind
  • Elastic shock cord in bottom hem for a quick, custom-like fit
  • Coated fabric for maximum water protection
  • One-year warranty

Cover provides all-season protection for 100 Series, S240 and Select Series™ X300 Series Tractors.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Protective cover (standard)

Order number: LP93917

Seat cover, deluxe mediumSeat cover, deluxe medium
#

Deluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:

  • Access to lumbar adjustment controls
  • Large-capacity rear-zippered cargo pocket
  • Two side mesh beverage pockets
  • Elastic cord in bottom hem for a custom fit
  • Medium size fits seats with backrests up to 15 in. (38.1 cm)
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, deluxe medium
Order number: LP92624

Seat cover, standard mediumSeat cover, standard medium
#

Seat cover protects new seats and renews old seats:

  • Cushioned seat for extra comfort
  • Four convenient pockets for keeping tools and gear within reach
  • Elastic cord in bottom hem for a custom fit
  • Medium size fits seats with backrests up to 15 in. (381 mm)
Ordering information

Contact your local John Deere dealer for availability and pricing information.

Seat cover, standard medium
Order number: LP92324

Spark Arrester

Spark arresterSpark arrester

Spark arrester is available to meet the law in the State of California requiring use of a spark arresting muffler under certain conditions.

Applies in other states and Canada when needed to comply with local ordinances or customer requests.

NOTE: This law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered, or grass-covered land (except watered lawns) without a spark arrester. For further information on this law, consult No. 4442.5 of the California Public Resources Code.

Sprayers

25-gal. (95-L) Mounted Sprayer shown on X300 Tractor25-gal. (95-L) Mounted Sprayer shown on X300 Tractor

Features and benefits:

  • 100-psi (689-kPa) SHURflo® diaphragm-type pump is designed for high-hour commercial applications; it can be run dry without damage.
  • It is easy to assemble the custom mounting brackets.
    • Brackets use the existing frame holes.
  • Brass-tipped spray wand is included as standard equipment; it is constructed of noncorrosive polypropylene material with Viton® components for multi-use applications.
  • Check valves in the boom tips prevent siphoning and dripping, which can cause lawn spotting.
  • Control valve directs spray to either the boom or spray wand for added convenience
    and versatility.
  • Electrical hookup is simple with a convenient on/off switch.
  • Sprayer contains a rugged translucent-yellow tank with molded fill-level indicators (in gallons).
  • It is only a 15-second no-tools mounting after assembly.

Specifications

 Item number LP22861
 Tank capacity 25 gal. (95 L)
 Boom 60-in. (152.4-cm) boom, 90-in. (228.6-cm) spray
 Spray wand reach 30 ft (9.1 m)
 Hose length 19 ft (8 m)
 Shipping weight 35 lb (16 kg)
 Warranty 2-year consumer warranty
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Mounted Sprayer for X300 and X500 Tractors

Order number: LP22861

SHURflo is a trademark of SHURflo, LLC.

Viton is a trademark DuPont Performance Elastomers.

15-gal. (57-L) Tow-Behind Sprayer15-gal. (57-L) Tow-Behind Sprayer

Sprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.

Features include:

  • This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.
  • Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.
  • A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties:

  • Sprayers provide an excellent way to apply liquid fertilizer.
  • Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

  • Fertilizer is more readily available to plants.
  • The fertilizer need not be worked into the soil by watering or rain before it will work.
  • Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

15-gal. (57-L) Tow-Behind Sprayer

Order number: LP19478

25-gal. (95-L) Tow-Behind Sprayer25-gal. (95-L) Tow-Behind Sprayer

Sprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.

Features include:

  • 100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
  • Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.
  • Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.
  • The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.

NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).

This sprayer is especially suited for maintaining residential and small commercial properties.

  • Sprayers provide an excellent way to apply liquid fertilizer.
  • Herbicides and pesticides can be applied along with liquid fertilizer or separately.

Advantages of using liquid fertilizer over dry fertilizer:

  • Fertilizer is more readily available to plants.
  • The fertilizer need not be worked into the soil by watering or rain before it will work.
  • Herbicides are more effective when applied with liquid fertilizer.

NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

25-gal. (95-L) Tow-Behind Sprayer

Order number: LP19479

SHURflo is a trademark of SHURflo, LLC.

Spreaders

Mounted electric spreaderMounted electric spreader

The mounted electric broadcast spreader for Select Series and Signature Series Tractors is ideal for medium- to large-size jobs and can be used to apply fertilizer, weed killer, sand, lime, and de-icer:

  • Compatible with X300 and X500 Select Series and X700 Signature Series Tractors
    • X300 Series Tractors must be equipped with 35-lb (16-kg) front wheel weights or front weight bracket and two 42-lb (19.1-kg) Quik-Tatch weights.
    • The electric broadcast spreader is not compatible with the X300R Rear Discharge Tractor.
    • When used on X700 Series Tractors, the spreader is not compatible with the weather enclosure, cabs, rear receiver hitch, or 3-point hitch.

Key features are as follows:

  • 125-lb (57-kg) capacity injection molded poly hopper
  • Durable welded, powder-coat frame
  • Ice-melt capability
  • Gear motor with 5-to-1 reducer
  • Stainless-steel shutoff plates
  • Directional control
  • Hopper cover is standard equipment
  • Available option: Barrier shield, 125-lb (57-kg) spreader
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Select Series Electric Spreader

Item number: LP35439

Spreader barrier shieldSpreader barrier shield

The barrier shield is used to direct product downward (36-in. [914-mm] width), converting the rotary spreader into a drop spreader. Perfect for ice melt and salt spreading, or for targeting specific areas.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb electric broadcast spreader barrier shield
Order number: LP23117

 

125-lb (57-kg) Pull-Type Spin Spreader 125-lb (57-kg) Pull-Type Spin Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

  • Seed
  • Fertilizer
  • Insecticide
  • Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

  • Positive on/off system (no cables)
  • 125-lb (57-kg) capacity corrosion-resistant polyurethane hopper
  • 13-in. (33-cm) pneumatic tires for easy rolling
  • Enclosed gearbox (metal gears)
  • Ergonomic dual handle featuring Accu-way™
  • Accu-way even spread pattern adjustment
  • Includes screen and cover

Accu-way is a trademark of Spyker Spreaders, Inc.

Hopper screen and throat opening
Hopper screen and throat openingHopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner
SpinnerSpinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control
Dial-A-Matic rate controlDial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

  • Dial position locks and unlocks automatically.
  • More than 80 settings provide an accurate application of materials.
Specifications

 

 125-lb (57-kg) Pull-Type Spreader175-lb (79-kg) Pull-Type Spreader
Recommended marketHomeownerHomeowner
TypeTow-behindTow-behind
Bundle numberLP25353 
Box capacity125 lb (57 kg), 2.5 cu ft (0.07 m3)175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)14.5x25.25x19.75 (36.8x64.1x50.2)18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
HopperPolyethylenePolyethylene
Hopper screenAluminumAluminum
Hopper bottom plateStainless steelStainless steel
Throat opening, in. (cm)0.81x2.75 (2.1x7)0.81x2.75 (2.1x7)
Connecting hardwareStainless steelStainless steel
Accurate application
Rate control80-setting Dial-A-Matic knob80-setting Dial-A-Matic knob
Rate gateNo-stick nylonNo-stick nylon
Rate gate linkageStainless steelStainless steel
Even dispersal
Spinner, in. (cm)12 (366)12 (366)
Spread pattern, ft (m)10 to 12 (3.1 to 3.7) wide10 to 12 (3.1 to 3.7) wide
Spread pattern equalizerAccu-way™Accu-way
Spinner shaftZinc-plated steelZinc-plated steel
Rotary agitatorStainless steelStainless steel
Miscellaneous
FramePowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steelPowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)18 (45.7)18 (45.7)
Drive gearsHeavy-duty die-cast metalHeavy-duty die-cast metal
Axle0.63-in. (15.9-cm) solid steel, zinc plated0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires13-in. x 5-in. (33-cm x 13-cm) pneumatic13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed3.5 mph (5.6 km/h)3.5 mph (5.6 km/h)
WarrantyOne-year limitedOne-year limited
Net weight, lb (kg)29 (13.2)34 (15.4)

 

Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

125-lb Pull-Type Spin Spreader

Order number: LP25353

175-lb (79-kg) Pull Spreader175-lb (79-kg) Pull Spreader

John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:

  • Seed
  • Fertilizer
  • Insecticide
  • Salt

All spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.

Features include:

  • Positive on/off system (no cables)
  • 175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper
  • 13-in. (33-cm) pneumatic tires for easy rolling
  • Fully enclosed gear box with metal gears for long life
  • Accu-way even spread pattern adjustment
  • Includes screen and cover

 

Hopper screen and throat opening
Hopper screen and throat openingHopper screen and throat opening

Hopper screens keep out debris and serve as chunk graters.

A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.

Spinner
SpinnerSpinner

Spinners are made of high-impact plastic that will not crack or break.

Dial-A-Matic rate control
Dial-A-Matic rate controlDial-A-Matic rate control

The Dial-A-Matic rate control lets the operator fine-tune the rate application:

  • Dial position locks and unlocks automatically.
  • More than 80 settings provide an accurate application of materials.
Specifications

 

 125-lb (57-kg) Pull-Type Spreader175-lb (79-kg) Pull-Type Spreader
Recommended marketHomeownerHomeowner
TypeTow-behindTow-behind
Bundle numberLP25353 
Box capacity125 lb (57 kg), 2.5 cu ft (0.07 m3)175 lb (79 kg), 3.5 cu ft (0.1 m3)
Hopper size, in. (cm)14.5x25.25x19.75 (36.8x64.1x50.2)18.5x27.5x21.5 (47x69.9x54.6)
No-rust versatility
HopperPolyethylenePolyethylene
Hopper screenAluminumAluminum
Hopper bottom plateStainless steelStainless steel
Throat opening, in. (cm)0.81x2.75 (2.1x7)0.81x2.75 (2.1x7)
Connecting hardwareStainless steelStainless steel
Accurate application
Rate control80-setting Dial-A-Matic knob80-setting Dial-A-Matic knob
Rate gateNo-stick nylonNo-stick nylon
Rate gate linkageStainless steelStainless steel
Even dispersal
Spinner, in. (cm)12 (366)12 (366)
Spread pattern, ft (m)10 to 12 (3.1 to 3.7) wide10 to 12 (3.1 to 3.7) wide
Spread pattern equalizerAccu-way™Accu-way
Spinner shaftZinc-plated steelZinc-plated steel
Rotary agitatorStainless steelStainless steel
Miscellaneous
FramePowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steelPowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steel
Frame width, in. (cm)18 (45.7)18 (45.7)
Drive gearsHeavy-duty die-cast metalHeavy-duty die-cast metal
Axle0.63-in. (15.9-cm) solid steel, zinc plated0.63-in. (15.9-cm) solid steel, zinc plated
Wheels/tires13-in. x 5-in. (33-cm x 13-cm) pneumatic13-in. x 5-in. (33-cm x 13-cm) pneumatic
Recommended travel speed3.5 mph (5.6 km/h)3.5 mph (5.6 km/h)
WarrantyOne-year limitedOne-year limited
Net weight, lb (kg)29 (13.2)34 (15.4)


Accu-way is a trademark of Spyker Spreaders, Inc.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb Pull-Type Spin Spreader
Order number: LP25354

40-in. (102-cm) Tow-Behind Aerator Spreader40-in. (102-cm) Tow-Behind Aerator Spreader
#

The 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:

  • 40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration
  • 132 steel-tine tips on 8-in. (20-cm) diameter tine stars
  • Three-position, full-sized lift lever
  • Direct spreader drive for consistent performance
  • Adjustable flow control
  • 100-lb (45-kg) spreader capacity
  • 4.10/3.5-4 pneumatic tires for easy pulling
  • 75-lb (34-kg) capacity weight tray
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications 

Width 40 in. (101.6 cm)
Aerator depth Up to 2 in. (5.1 cm), two positions
Spreader capacity 100 lb (45 kg)
Tines
Number of tips132
Diameter8 in. (20.3 cm)
MaterialSteel
Lift adjuster Manual
Wheels 4.10/3.5-4, pneumatic
Drive Direct
Weight-tray capacity 100 lb (45 kg)
Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
    The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Aerator Spreader

Order number: LPAS40JD

130-lb (59-kg) Pull-Type Spin Spreader 130-lb (59-kg) Pull-Type Spin Spreader

Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf.

 

Two-year warranty.

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

130-lb Pull-Type Spin Spreader
Order number: LP39087

Broadcast SpreaderBroadcast Spreader

This 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:

  • The polyethylene hopper will not dent or rust.
  • All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.
  • Large pneumatic turf tires ensure a positive drive and smooth operation.
  • High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.
  • Fully enclosed gearbox eliminates downtime and maintenance.
  • Autoflow feature stops the flow of materials - automatically - to prevent burns.
  • Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

175-lb (79-kg) Broadcast Spreader

Order number: LPBS36JD

Sun Protection

Sun shade for Select Series X300 and X500 TractorsSun shade for Select Series X300 and X500 Tractors
Sun shade installs on heavy-duty CargO MountsSun shade installs on heavy-duty CargO Mounts

The sturdy sun shade provides an effective way to keep the sun off of the operator for more comfortable warm-weather operation of the tractor:

  • Frame is made of strong 1.25-in. (32-mm) diameter steel tube with 0.063-in. (1.6-mm) wall thickness.
  • The sun shade mounts to the heavy-duty CargO Mount™ system.

    • Sun shade includes the 4-wheel-steer rear weight bracket to provide a sturdy
      Quik-Tatch mounting system.
      • Holds up to two 42-lb (19-kg) Quik-Tatch weights on X300 Series Tractors
      • Holds up to four 42-lb (19-kg) Quik-Tatch weights on X500 Multi-Terrain Tractors
  • Cloth top measures 32-in. (81.3-cm) long by 34-in. (86.4-cm) wide.
  • Rear panel is made of cloth mesh material to provide additional protection from the sun while permitting the operator to see through it.
  • Two bolts with hand knobs on the mounting posts allow easy removal of the sun shade.
  • Elastic strap with clip is included to hold the 7-bu (247-L) hopper top open when the hopper is installed.
  • Overall height to the top of the sun shade is 72 in. (182.9 cm).

 

The sun shade is compatible with the following:

  • Select Series™ X300, X304, X320, X324, X340, X350, X354, X360, X370, X380, X384, X390, and X394 Tractors
  • Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors
Ordering Information

Please contact your local John Deere dealer for availability and pricing information.

 

X300/X500 Sun Shade

Order number: BM23054

Sun shade installed using 7-bu (247-L) bagger bracketSun shade installed using 7-bu (247-L) bagger bracket

The 7-bu (247-L) 2-bag hopper or 14-bu (493-L) 3-bag hopper can be installed and used with the sun shade installed. The sun shade installation instructions explain how to install the hoppers with the sun shade.

Thatchers

Front thatcherFront thatcher
Front thatcherFront thatcher

The thatcher, used on a regular basis, reduces excessive thatch buildup that can be damaging to a lawn's health.
 
Since it provides more gentle, less aggressive action than a power rake, it can be used as a preventive maintenance tool each time the lawn is mowed.

Ordering information

 

Please contact a local John Deere dealer for availability and pricing information.

38-in. (97-cm) Front Thatcher

Order number: LP48004

8-in. (20-cm) thatcher extension for wider widths8-in. (20-cm) thatcher extension for wider widths

An 8-in. (20-cm) extension is available to provide widths of 46 in. (117 cm) and 54 in. (137 cm) (Add an extension to one end of front thatcher to make it 46-in. [117-cm] wide; add an extension to both ends for a 56-in. [142-cm] width.)

Front thatcher installed on X534 TractorFront thatcher installed on X534 Tractor

A thatcher mounting frame is required to install the 38-in. (97-cm) front-mounted thatcher on a vehicle.

40 in. (102-cm) Tow-Behind Thatcherator40 in. (102-cm) Tow-Behind Thatcherator
#

The 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:

  • 40-in. (102-cm) width to cover ground fast
  • 20 spring-loaded tines for maximum performance
  • Three-position adjustment
  • Weight tray to allow increased scratching power

An 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 40 in. (101.6 cm)
Tines
Number20, spring-loaded tips
Diameter0.19 in. (0.5 cm)
MaterialSteel
Weight tray capacity100 lb (45 kg)
Lift adjuster Three positions
Wheel
Size8 in. (20.3 cm)
TreadRib
MaterialSteel
Optional extension 8 in. (20.3 cm)


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Thatcherator

Order number: LPTA40JD

Tire Chains

TerraGrip Traction BeltTerraGrip Traction Belt
#

Protect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.

Features:
  • Rubber slats surround the tire and will not damage driveways or sidewalks.
  • No steel touches the driving surface.
  • No-tools installation utilizes a traditional steel chain attachment system.
  • Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).
  • TerraGrip Traction Belts are approved for John Deere X300, X500 M-T, and X700 Series Tractors.

Additional information for 4-wheel-steer tractor models:

  • X700 Series – requires wheel spacer sold separately
  • X500 Series – requires wheel stop adjustment
  • X300 Series – no additional requirements
Tire chain with optional wheel weights on X728 TractorTire chain with optional wheel weights on X728 Tractor

Chains are recommended for extra traction when using attachments such as a snow blower or front blade.

One pair of chains is included in each bundle.

TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, and E120 Tractors.

TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.

TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, and E180 Tractors.

TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.

TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.

TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.

TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.

TY25326 tire chains - 26x10.5-12
NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.

TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

Tow Behind

42-in. (107-cm) Lawn Sweeper42-in. (107-cm) Lawn Sweeper

The 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

  • 42-in. (107-cm) clearing width
  • 17-bu (599-L) capacity to make fast work of picking up material
  • Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
  • Hitch has seven positions to match up correctly with a variety of vehicles
  • Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
  • A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Brush heightSweeping conditions
Ground level to 1 in. (25 mm) aboveSmooth surfaces - driveways, parking lots, and
sidewalks
1 in. (25 mm) to 2 in. (50 mm)Mowed lawns under normal conditions, or light
leaves
2 in. (50 mm) to 3 in. (75 mm)High grass, heavy leaves, or heavy grass clippings

 

 

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

42-in. (107-cm) Tow-Behind Lawn Sweeper
Order number: LPSTS42JD

44-in. (112-cm) Lawn Sweeper44-in. (112-cm) Lawn Sweeper
#

The 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.

Features include:

  • 44-in. (112-cm) clearing width
  • 17-bu (599-L) capacity to make fast work of picking up material
  • Convenient brush-height adjuster has eight positions for easy selection of the optimum sweeping height
  • Hitch has seven positions to match up correctly with a variety of vehicles
  • Large 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotation
  • A unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage space
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Brush heightSweeping conditions
Ground level to 1 in. (25 mm) aboveSmooth surfaces - driveways, parking lots, and sidewalks
1 in. (25 mm) to 2 in. (50 mm)Mowed lawns under normal conditions, or light leaves
2 in. (50 mm) to 3 in. (75 mm)High grass, heavy leaves, or heavy grass clippings

 

 

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

44-in. (112-cm) Tow-Behind Lawn Sweeper
Order number: LP49038

Dethatcher kit for sweeperDethatcher kit for sweeper
#

This John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use.

 

Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

 

Dethatcher kit for sweeper

Order number: LP42108

Multi ToolMulti Tool
#

The Multi Tool includes one platform and two separate attachments, saving space and money.

 

  • Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weight
  • Includes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass roots
  • Includes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass roots
  • Elongated handle - makes it easier to raise into transport or lower for use
  • Spring assisted lever - makes changing the attachments quick and easy


John Deere has combined the best lawn tools into one package.

Two-year warranty.

 

Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

Multi Tool

Order number: LP39089

36-in. (91-cm) Tow-Behind Lawn Roller36-in. (91-cm) Tow-Behind Lawn Roller
#

The Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:

  • 36-in. (91-cm) wide polyethylene drum
  • 390-lb (177-kg) weight for excellent leveling
  • Rounded end caps to reduce gouging
  • 42-U.S. gal. (159-L) capacity
  • Long-lasting Nylatron® bearings

Nylatron is a trademark of QUADRANT AG or its affiliates or licensors.

Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 36 in. (91 cm)
Roller
Size36 in. x 18 in. (91 cm x 46 cm)
Capacity42 U.S. gal. (159 L)
Weight (filled)390 lb (176.4 kg)
Drum/end-cap material High-density polyethylene (HDPE)
Bearings Nylatron

 


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

36-in. (91-cm) Tow-Behind Lawn Roller

Order number: LPPRT36JD

40-in. (102-cm) Tow-Behind Plug Aerator40-in. (102-cm) Tow-Behind Plug Aerator
#

The 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:

  • 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
  • Three-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths
  • 28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines
  • 1-in. (2.5-cm) diameter high-carbon steel-tine shaft
  • 4.10/3.50-4 pneumatic tires for easy pulling
  • 175-lb (79-kg) capacity weight tray
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 40 in. (101.6 cm)
Aerator depth Up to 3 in. (7.6 cm)
Tines
Number of tips28
Spacing6 in. (15.2 cm) apart
Material Carbonized, 16-gauge, 0.6-in. (1.5-mm) steel
Lift adjuster Manual, three position
Wheels 4.10/3.5-4, pneumatic
Weight-tray capacity 175 lb (79.4 kg)
Vehicle compatibility and requirements

Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.
    The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Plug Aerator

Order number: LPPA40JD

40-in. (102-cm) Tow-Behind Spiker Aerator40-in. (102-cm) Tow-Behind Spiker Aerator
#

The 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:

  • 40-in. (102-cm) width with up to 2 in. (5 cm) of penetration
  • 10-in. (25-cm) diameter steel-tine stars
  • 132 steel-tine tips on 11 spike wheels
  • 3.5-in. (9-cm) spike-wheel spacing
  • Full-sized lift lever
  • 4.10/3.5-4 pneumatic tires for easy pulling
  • 100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetration
Quality design

John Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.

This implement features legendary John Deere performance and quality.

Specifications

 

Width 40 in. (101.6 cm)
Aerator depth Up to 2 in. (5.1 cm)
Tines
Number of tips132
Diameter10 in. (25.4 cm)
Spacing3.5 in. (8.9 cm) apart
MaterialSteel
Lift adjuster Manual
Wheels 4.10/3.5-4, pneumatic
Weight tray capacity 100 lb (45 kg)


Requirements and/or recommendations: tow-behind equipment

  1. Rear wheel weights are recommended for additional traction.
  2. The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.
  3. The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).
  4. For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

40-in. (102-cm) Tow-Behind Spiker Aerator

Order number: LPSAT40JD

Weather Enclosures

Weather enclosure for X300 and X500 M-T TractorsWeather enclosure for X300 and X500 M-T Tractors
#

The roomy steel-frame cab shields the operator against snow, rain, sun, and wind.
Key features include:

  • Easy entry with hinged-door access
  • Double-zippered access hole for control maneuverability
  • Super-clear vinyl windows that are cold-crack tested to -4°F (-20°C)
  • Zippered windows that allow for additional airflow
  • Assembles and installs with standard hand tools in one hour
  • Overall height from ground to top of cab of 78 in. (198 cm)
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

 

Weather enclosure

  • Discontinued - LP36740 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, and X360 Tractors
  • LP55438 Weather Enclosure - Select Series™ X300, X304, X310, X320, X324, X340, X350, X360, X354, X370, X380, X384, X390, and X394 Tractors
  • Discontinued - LP36741 Weather Enclosure - Select Series X500, X520, X530, X534, X540, and X590 (model year 2015) Multi-Terrain Tractors
  • LP55439 Weather Enclosure - Select Series X500, X520, X530, X534, X540, X570, X580, X584, and X590 Multi-Terrain Tractors

Weights

34-lb (15.4-kg) front wheel weight34-lb (15.4-kg) front wheel weight

A durable cast-iron weight can be mounted to each front wheel.

These weights are recommended for use when operating on slopes, especially when the tractor is equipped with a rear grass bagger or other rear-mounted equipment.

Each weight requires BM17978 mounting hardware.

42-lb (19-kg) Quik-Tatch weight42-lb (19-kg) Quik-Tatch weight
42-lb (19-kg) weights and optional mounting bracket42-lb (19-kg) weights and optional mounting bracket

The 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.

This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).

Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.

X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:

  • One  M147986 weight retaining rod (Parts)
  • Two  M40461 spring clip (Parts)
Standard front bumperStandard front bumper
Optional front weight bracket/bumper installedOptional front weight bracket/bumper installed

The optional front weight bracket/bumper is available to replace the standard front bumper on the following tractors:

  • Select Series™ X300, X300R, X304, X305R, X310, X320, X324, X340, X350, X350R, X354, X360, X370, X380, X384, X390, and X394 Tractors
  • Model year 2007 and later (SN 020001-) Select Series model X500 Tractor
  • All X530 Select Series Tractors
  • Model year 2011 and later (SN 060001-) Select Series model X534 Tractor
  • X570 Select Series Tractor
Front weight bracket/bumper with four weightsFront weight bracket/bumper with four weights

NOTE: Weights are ordered separately.

Holds up to four 42-lb (19.1-kg) Quik-Tatch weights:

  • Provides an alternative to front-wheel weights for ballasting rear-mounted equipment
  • Makes the 42-in. (106.7-cm) Hydraulic Tiller compatible with the X530 Tractor
  • Functions as a bumper when weights are not installed

 

Can be used in combination with all John Deere equipment, except the following:

  • Styled front bumper (BM23056)
  • 40-in. (101.6-cm) Tractor Shovel
30-lb (13.6-kg) front wheel-weight shown30-lb (13.6-kg) front wheel-weight shown

Hardware is required for installing each front-wheel weight.

Requirements:

  • Mounting may require drilling two holes in the wheel rim.
  • BM17978 mounting hardware kit is required for each weight.

NOTE: Front-wheel weights are not available for special edition tractors because the styled front-wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.

Reviews

4.51

193 reviews

Rating Snapshot

146
23
10
10
9
4.43
4.56
4.56

Well built

5/5

Well built machine for a homeowner. I purchased it 10 yrs ago, 2014 model with Kawasaki 19.5hp engine. Never missed a beat, the battery is impressive as well, lasted solid 7 seasons. The only pev peeve I would have with this machine is riding comfort, feel every bump on the lawn, especially after a surgery that I had it’s hard to bare, so I’m selling it now and looking to get zero turn with suspension frame. But as far as build quality and reliability this one is top shelf!

Pros

Cons

Igor T

From: Harrisonburg VA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

I’d buy another

4/5

Enjoy the mower and happy that I bought it. Having The forward pedal on the inside, and the reverse pedal on the outside, takes some getting used to, at least for me. I also wish there was a way to lock the reverse mechanism instead of holding the button down. I would certainly buy another one based on my experience to date.

Pros

Cons

billy64

From: North Georgia

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

5/5

I am quite happy with my X330 lawn tractor. It is a noticeable improvement over the lawn tractor I previously owned by another manufacturer.

Pros

Cons

John 302

From: Bethlehem, PA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Green Machine

5/5

This was quite an upgrade from my 26 year old LT133 so needless to say I am impressed overall. I am pleased that my dealer was able to resolve an issue that occured after delivery. Great customer service!

Pros

Cons

LastOne

From: Sheboygan, WI

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Game changer

5/5

Game changer. Used to push mow the yard and it would take about 6 hours to get it done. Now with the ride on mower it takes about an hour and a half to get it done. The mower is easy to use and does a great job. It doesn’t really feel like a chore to cut the grass anymore.

Pros

Cons

Moe182

From: New Hampshire

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

4
2
5

Right size and easy to operate.

5/5

Perfect mower for our property. We are very pleased with both the mower and the salesman.

Pros

Cons

Very happy shopper

From: Rome, NY

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Back up botton annoying

3/5

Solid built, well engineered machinewith one exception The featured requiring a button to be depressed to keep the mower deck functioning while backing up is very annoying .

Pros

Cons

No Neighborhood Children

From: Wisconsin

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Nice machine

5/5

I’ve used it 6 times now and it has performed perfectly. Great bagging and even cutting. The salesman knew the equipment and his recommendation for my needs proved to be completely adequate

Pros

Cons

Tony K

From: Oxford, MA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

5/5

Everything I expected and more!! Still learning, but so very impressed with all the things it can do.

Pros

Cons

Wild Willy

From: Panora Iowa

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

5/5

Great mower. Looking at buying a 42 inch deck next

Pros

Cons

RL62

From:

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

4/5

I bought the X330 John Deere Lawn Tractor because I needed it now and wish I would have waited and bought a used better model John Deere The tractor is not enough tractor for the money

Pros

Cons

Joooo

From: Kentucky

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

2
2
5

Still making quality mowers

5/5

This mower is well built. It is easy to operate. This is my 3rd 300 series mower in 30 years. They have all been very reliable, low cost to operate, and I highly recommend John Deere mowers as a result.

Pros

Cons

Lawnmeister

From: Fredonia, NY

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

I love it

5/5

Once the mowing is complete the result is a very smooth looking lawn. In hind sight I should have purchase the grass mulching kit. But the result is stil great.

Pros

Cons

Hi Priced Help

From:

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

4
2
5

5/5

Works great. I have a sloped yard and it does a great job. I can easily adjust the height I need. The pedals makes it easier to go at your pace. I love it

Pros

Cons

Flossy

From: Asheboro N.C.

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Beginner

4
2
5

The perfect Lawn Tractor

5/5

I had a John Deere Lawn Tractor for 23 years and upgraded to the X300 Series. The X330 has exceeded my expectations with exceptional performance. The X330 is perfectly sized for my yard, and I appreciate the Mulching Attachment. I will only look at John Deere for our lawn care needs!

Pros

Cons

Torque1

From: Cross Plains, WI

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Very nice tractor with great features.

5/5

I Bought this just over a month ago, and no regrets. Right so smooth compared to what I had. Love the Forward and backward pedals. Have the mulch kit on it and it has literally cut down mowing time.

Pros

Cons

Happy mower

From: Kansas

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

4/5

Had it about a month. Happy with it but it is a lot louder than my simplicity was

Pros

Cons

CMPGT

From:

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Comfortable.

5/5

I purchased this lawn tractor on July 08, 2024. I have used it 6 times since delivery and I'm now starting to feel very comfortable using it. No problems and it really reduces my workload. I'm very pleasantly surprised how fuel efficient the machine is. I have not had the machine serviced, yet, but those operations seem simple and straightforward. No more worries about the grass getting too high to mow. With my walk-behind Honda, mowing had to be done twice/week because the mower was not powerful enough to cut through high grass. Those issues are history now because my X330 is a powerhouse.

Pros

Cons

JoeMac

From: Greece, NY

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

5/5

Pros

Cons

Bpiper

From:

Length of Ownership: 1month

Usage Frequency: Monthly

Level of Expertise: Expert

5
2
5

Great features

3/5

It's a nice mower, I done care for the turn radios. When I do my round flower beds my back tires run up on the rocks.

Pros

Cons

DL DUCK

From: Landisville, pa

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Lawn Tractor at its best…!

5/5

Just sweet..! Lawn looks like a golf course..! Love my X330…!!!! Wouldn’t change a thing..!

Pros

Cons

Chris70

From: Newport NY

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Green and Yellow..!!!!

5/5

Bought this X330 mower 2 months ago and couldn’t be more happier..! Beautiful machine..!! My lawn looks like a golf course..!!

Pros

Cons

ChrisD70

From: Utica, NY

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

DIFFERENCE BETWEEN LAWN MOWER AND LAWN TRACTOR

5/5

Nothing can touch my John Deere. I knew this would be the year to replace the 10 year old Craftsman rider and the only other machine that would last like that one did would be a John Deere. Being a retirement age woman, I needed one that I could handle for basic yard mowing and this was my top choice. At the dealership, the staff were great and gave me an instruction class on how to operate the tractor, explained the safety features, and answered questions with ease to make me feel comfortable using it. The seat is adjustable with springs underneath for users weight which is a nice feature- no bouncing around and feels stable. The cut is even and the deck is flexible and the turn is tight and smooth. I enjoy mowing my lawn and this makes it even better. Thank you and I recommend this lawn tractor without hesitation.

Pros

Cons

LibbyD

From: Columbia County, NY

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Buy from a Dealer..!!!!

5/5

Do not buy from a box store..!!!! Buy from your local dealer..!!!! You will be much happier

Pros

Cons

CD70

From: Utica

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Easy to operate and do maintenance on and stronger

5/5

Had mower about 4 weeks and is what I needed. The 180 had was great too but this is the mower best for what I needed

Pros

Cons

Kedii

From: Richwood WV

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

0
2
5

Joseph weeks

5/5

The 330 mower with the 48 inch deck is excellent and better than i expected

Pros

Cons

Joe weeks

From: Afton ny

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Great Features.

5/5

I purchased the x330 lawn tractor 3 weeks ago and it has been a great little tractor. It saves me time and cuts like a dream.

Pros

Cons

Steve244

From: New Hampshire

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

Great features.

5/5

Replaced our 17 year old X300 with the X330. Great machine.

Pros

Cons

harleyg

From: Somerset, WI

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

5/5

Pros

Cons

Chri

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5

The Green Machine

5/5

It’s a wonderful mowing machine I’m pleased that I made the purchase.

Pros

Cons

Moose2Pa

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

5
2
5

Hot flames in Michigan

1/5

I purchased the tractor a month ago, and within 20 minutes of mowing on a hill, it rolled over after hitting a rut and caught fire. The battery dislodged and the leads were torn out, which I suspect is a design flaw since the battery is secured only against lateral movement, not tipping. I could have repaired the damage, but the fire melted the plastic around the engine, seeping into it and destroying the wiring. When I inquired with my dealer about recourse through John Deere or the dealership, I was informed that it was now my problem. I believe that a tractor should not ignite from a simple rollover. Although I righted it within minutes, the fire damage was too extensive, rendering it irreparable.

Pros

Cons

Smoking Smitty

From: Holly Michigan

Length of Ownership: 1month

Usage Frequency:

Level of Expertise: Intermediate

2
2
5

Too soon.

4/5

Still a little early to review quality - only 8 hours use. Powerful and cuts beautifully. A very rough ride through bumpy terrain. Do not like blade disengaging in reverse or need to put set brake to engage blades. My old 6 gear Craftsman was much simpler to use. Do like auto transmission that makes it easy to vary speed around trees, etc. Deck sounds like thin tin when blades hit little limbs, etc. - hope it holds up.

Pros

Cons

Fred2

From: Indiana

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

3
2
5

5/5

Pros

Cons

April

From:

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Love the features

5/5

We had good service and we would recommend you. The expectations for the lawn we enjoy.

Pros

Cons

Pudding Pop

From: Philadelphia, NY

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

5/5

It’s so nice to have a molar. I don’t have to do a bunch of stuff to just to get it going before I can mow.

Pros

Cons

Luckily

From: Iowa

Length of Ownership: 3months

Usage Frequency:

Level of Expertise:

5
2
5

It has features I never dreamed was available on t

5/5

I love this Tractor. It looks great and does a great job on the lawn.

Pros

Cons

Gene50

From: Ottawa, Ohio

Length of Ownership: 3months

Usage Frequency: Monthly

Level of Expertise: Intermediate

5
2
5

Best Mower

5/5

The X330 riding mower is the nicest mower I have ever owned. It is a quiet and smooth running mower. All the technology on the mower is fabulous. I’m really enjoying it and hope to for a long time. I guess I need to mention that it cuts my grass beautifully.

Pros

Cons

Garden Lady

From: Tennessee

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

22 horsepower chomps through the tallest grass

5/5

Bought last month and have accumulated 8 hours, so far with my first oil change at 6.0 hours

Pros

Cons

alanb1958

From: port byron, NY

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

20 hours in and loving it

5/5

I did a lot of shopping when my old Deere died after 20yrs but I'm very glad I bought the X330. I'm going to get the bad stuff out of the way so we can get back to the 5 star review. There are a couple of things I find really annoying and seem like odd design choices. The brake and drive pedals are on the same side. It's impossible to get off the brake and into forward smoothly when you're on a hill. The safety button for backing up with PTO engaged is BAD. It's large and easy to find but the underlying switch isn't strong enough to handle the button. It's already a bit wobbly and you have to hit it in a specific place and angle to get a reliable press. Everything else is FANtastic. Maneuverability, cut, comfort, speed, build quality are all amazing. I mow 2 acres and i get through it at least 25% faster now. I had to have a no bull bagging system and nobody else in this price class comes close. The powered MCS works flawlessly with wet or dry grass (I expect no issues with the maple leaves in the fall).

Pros

Cons

Bitmap321

From: Snohomish WA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Great sales!

5/5

Great experience buying from Rodney. Very helpful picking the right lawn tractor. Very knowledgeable. Love my new Deere!

Pros

Cons

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5

Nice mower

4/5

Pleased with the lawnmower. Missing the reverse PTO button that allowed mowing while in reverse

Pros

Cons

None34

From:

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

digital readout and ease of engaging mower blade.

5/5

The x330 cuts great, handles very easy, easy start.

Pros

Cons

Cane

From: Alcoa, Tn

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

5/5

I’m becoming an expert on driving my new lawn mower. At 63 and having to mow 2 yards, it takes a lot of pressure off my back and feet.

Pros

Cons

Big girl

From:

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

easy to use

5/5

used for 1 month, everything runs good. Deck wash port a little tough to use when hooking hose to it. Also when delivered central jersey forgot to brink the manual, and the key, lucky I also purchased the 1025r which uses same key, I need to pick up at dealer.

Pros

Cons

tony leadman

From: nj

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Rides really well

5/5

Great service in the store and my tractor is just what I needed. Works great

Pros

Cons

Kelli1973

From: Charleston WV

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

5/5

Pros

Cons

Kap56

From:

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Old Lady decided to upgrade her grass cutting.

5/5

With such a wet spring, my 35 year old John Deere Riding Mower with the mulching blade was leaving grass turds all over my yard. The John Deere Lawn Sweeper was just too much trouble to use picking up the mess. So I decided it was time to make a change. Although this is like going from a bicycle to a car, once I got use to it, I love the appearance of my yard. No more lawn debris and wow the extra width cuts down on grass cutting time. It does take a bit more concentration because of the new width and I will be moving a shrub that is just too close, but the results are great. My only real complaint is this old fat lady has a difficult time getting on the seat, as it sits so much higher than my old riding mower. Using some retired muscles, but hopefully they will start working again.

Pros

Cons

Suzanne73

From: Henderson, KY

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

5/5

Pros

Cons

Horse

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5

Great mowing job, but messy

4/5

I've had this tractor a month. It is running great, does a great job mowing resulting in a very evenly cut lawn even though the lawn has many bumps & holes. The bagger has not clogged. The issues are that it blows dust/lawn clippings around while mowing and the bagger has several ledges that need to be cleared when replacing the bags, so basically lawn mowing has become a dirtier job than it needs to be. Also, removing/installing the bagger and storing it is a pain which I need to do when switching to using a JD cart.

Pros

Cons

glpj

From: Snohomish, WA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Very happy!

5/5

Glad we went with JD X330. Plenty of go esp on our hilly property and the turn radius is pretty decent!! Love it

Pros

Cons

GENCON25

From: Monument colorado

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

5/5

Love this mower,eady ro run ,love the reverse button

Pros

Cons

Lesa

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5

Great Dealership

5/5

I’ve bought several mowers over the years, the JD x330 is the best. And the dealership was amazing . I highly recommend !

Pros

Cons

Old timer

From: Plymouth IN

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Great tractor!

5/5

I've mowed 3 times with my x330, love it! Does everything my 1.5 arces needs.

Pros

Cons

Chubbs

From: Indiana

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

5/5

Pros

Cons

WAKA

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5

5/5

Pros

Cons

WAKA

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5

Good lawn tractor

4/5

Brand new tractor was delivered with an apparent oil leak. Contacted the service department and they immediately picked up the tractor, took it to the shop, determined that it was a defective engine part and replaced it. Since then the tractor works well.

Pros

Cons

BEM9555

From:

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Love Hate Relationship

2/5

We use this mower weekly. I love the comfort of the design but - we are constantly breaking belts due to the design of the deck, the bagging chute is difficult to attach, and poor quality. We had to replace the seat because the material didn't hold up.

Pros

Cons

sherb

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5

Awesome Machine

5/5

I love this mower!! I’ve had shoulder surgery and using a manual hand lift for the mower deck wasn’t doable so this model has a foot pedal lift which is awesome!

Pros

Cons

Rkotel

From: Saratoga Springs NY

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Fun Times in my Big Yard

5/5

I love my new John Deere mower! I wish I had purchased one sooner; I am enjoying mowing, hauling things in its cart and fertilzing with the spreader attachment. My only complaint was that we could not get the sun shade for this model attached. The directions were for many different models and after an hour or two, we gave up and returned the sun shade to the dealer.

Pros

Cons

marsh8361

From: Lexington, MO

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

Good all around tractor/mower.

5/5

The X330 is perfect for my needs. I mow about 1.5 acres. It handles well and does a nice job. Several selection for grass height.

Pros

Cons

SteveB57

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5

Great Machine

5/5

Just the right size for my needs. Plenty of power. Lots of adjustment levels to choose from.

Pros

Cons

SABarros

From:

Length of Ownership:

Usage Frequency:

Level of Expertise:

0
2
5