Features
Specifications
Accessories and Attachments
Ag Management Solutions
The AMS integration kit allows the operator to mount a StarFire receiver and GreenStar display (both receiver and display sold separately) to the Gator Utility Vehicle.
Key features of the AMS integration kit:
- Compatible with StarFire iTC™ and 3000 Receivers
- Compatible with GreenStar 2 1800, GreenStar 2 2600, and GS3 2630 Displays
- GS display mounts to the occupant protective structure (OPS) for convenient access
- Ability to mount receiver to the poly roof, or on the OPS alone
- Switched power to receiver and display allows the operator to run the AMS equipment even when the vehicle’s ignition is off. Receiver and display will not turn off when the vehicle’s ignition is turned on and off.
Common applications:
- Boundary mapping
- Flagging field obstacles
- Soil sampling
Compatibility:
- Compatible with Gator XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Gator Utility Vehicles. Compatible with full windshield, poly cab.
Batteries
The dual battery kit provides a much-needed peace of mind, knowing that your extra battery will get you home.
The kit includes the necessary wire harnesses, new battery tray to house the dual batteries, battery isolator, and battery hold-down.
All auxiliarys (winch, stereo, lights, etc.) should be run off the auxiliary battery.
The battery isolator will keep the starting battery fully-charged, and then will switch to charge the auxiliary battery.
NOTE: Kit does not include the batteries for the dual battery kit. Call your local Exide branch or order through JDPoint.
Batteries for kit:
US: SW18LBS
Canada: SWC18LBS
Bumper
CV guards add additional protection for the A-arms, brake lines, and CV half shafts:
- Aluminum guards handle impacts while maintaining a low, unsprung mass
- Includes front and rear guards
- Easily bolts to the A-arms with three bolts per corner (12 bolts total)
- Drainage holes provided to prevent buildup of dirt, grass, and other loose materials
The front brush guard for the Gator™ RSX Utility Vehicle has the styling to complement the unit, but it is also tough enough to take on the roughest terrain.
- The integrated styling protects the front of the vehicle but complements the look of the vehicle
- Integrates well with the front mounted winch (optional)
- Rotates forward without tools for easy access to service points and additional storage under the hood
- Design permits easy access under hood without modification
- Design provides good approach angle for leveraging over obstacles in front of vehicle
Add additional protection to the Gator™ XUV590 or RSX Utility Vehicle.
- Adds extra protection to chassis and body panels
- Easy to install
Add additional protection to the Gator™ XUV590E/M, XUV560E/M or RSX860E/M Utility Vehicle.
- Adds extra protection to chassis and body panels
- Easy to install
The front PreRunner bumper mounts to the front of the unit to offer increased protection to the grille and headlights.
- Possesses welded brackets for quick installation of the Hella® light kits
- Rotates forward without tools for easy access to service points and additional storage under the hood
- Design permits easy access under hood without modification
- Design provides good approach angle for leveraging over obstacles in front of vehicle
Hella is a registered trademark of Hella KGaA Hueck & Co.
Add additional protection to the rear of the Gator XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicle by adding BM23362 rear bumper.
The large, heavy-duty skid plate adds additional protection for the frame and critical powertrain components.
Features and benefits:
- 3.175 mm (1/8 in.) aluminum material handles impacts
- Deflects loose materials and debris
- Lower friction coefficient, so better at sliding over obstacles
- Holes have been added for serviceability
Underbody Armor - BUC10347
Cargo Box
The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.
The cargo box bed mat not only protects the floor of the cargo box from scratches and dents, but it also provides additional cushioning and slip resistance to items being hauled in the cargo box.
Increase the versatility of cargo box on Gator XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles by adding cargo box rails. These sturdy rails attach easily to the cargo box, and allow for a variety of accessories to be added and removed with ease.
For use with select accessories featuring the 25-mm (1-in.) quick-clamp mounting system.
Increase the cargo capacity of Gator™ XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles by adding cargo box wall extensions to the cargo box. This accessory is easy to attach to, and remove from, the cargo box rails, thanks to the quick-clamp mounting system. The tailgate is able to be opened and closed while the extensions remain in place, allowing for easy dumping.
NOTE: Not compatible with operator protection system (OPS) poly cab.
Key features:
- The cover closes off the top of the side extensions, ideal for hauling hunting dogs, and small animals
- Easily attaches to the side extension kit (required, sold separately)
- Dimensions: 47.6” (120.9 cm) wide x 25” (63.6 cm) tall x 32.3” (82.4 cm) deep
Compatibility:
- Gator™ XUV 550, XUV 550 S4, XUV560E/M, XUV560E/M S4, XUV590E/M, XUV590E/M S4, and RSX860E/M Utility Vehicles
Key features
- Weather-resistant construction with rain flap
- Wide opening top with military-grade zipper allows access from either side
- Carry handle for transport when outside of the vehicle
- Can be quickly secured and removed without tools
- Fully padded to protect gear during transport
- Two dividers attached with hook-and-loop fasteners (included) can be repositioned anywhere within the bag to secure loose gear or divide the bag into multiple compartments
- Bottom plastic feet for durability and wear resistance
- Inside dimensions: 129.5 cm x 20.3 cm x 35.6 cm (51 in. x 8 in. x 14 in.)
Compatibility
- Mounts inside the cargo box and fits mid-size XUV550, XUV550 S4, XUV560/590, XUV560/590 S4, and RSX with cargo box rail attachment (required for proper installation)
Ordering information
Available through Order Zone.
The spare tire rack is ready to be put to good use if the terrain claims a tire. The tire rack will hold either the front or rear tire. It mounts to both the cargo bed and the cargo box rails (required) to keep the spare tire secured through the roughest terrain.
Compatible with Gator™ RSX, XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, and XUV590 S4 Utility Vehicles.
Carts
The 21 Steel Utility Cart is the ideal companion for the Gator™ Utility Vehicle:
- 454-kg (1000-lb) load limit
- Dump angle of 35/40 degrees
- Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
- Large pneumatic tires
- Provide good flotation in mud, sand, and other wet or soft areas
- Flex over bumps and ruts for a smoother, more controlled ride
- Minimize ground compaction to save turf and prevent ruts in soft ground
- Unique bracket less tailgate means no side channels to obstruct materials when emptying
- When shoveling, recessed flat bolt heads stay out of the way
- Heavy-duty, reinforced one-piece solid undercarriage
- Contoured corner bed design
- Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1-7/8-in.) ball hitch, including Gater™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models
Ordering information
Contact the local John Deere dealer for availability and pricing information.
21 Steel Utility Cart
Order number: LPUT21JD
Cover
- Provides year-round weather protection to a vehicle equipped with an operator protection system (OPS), rollover protective structure (ROPS) or full enclosure (cab)
- Heavyweight polyester fabric for maximum durability and resistance to tears
- Polyurethane-coated for maximum water resistance and repellency
- Dual-reinforced air vents let air circulate and help to prevent ballooning in wind
- Reinforced rear corners for added durability
- Elastic shock cord in the bottom hem for a quick custom-like fit
- Compatible with Gator™ XUV 550, XUV560, XUV590, and RSX Utility Vehicles
Ordering information
Contact the local John Deere dealer for availability and pricing information.
Vehicle cover - black
Order number: LP37036
All-season protection against sun damage, rain, dust, and tree sap. Additionally:
- Black
- Dual-reinforced air vents let air circulate and help prevent ballooning in winds
- Reinforced corners for added durability
- Tension panels allow cover to be used while trailering
- Heavy-duty coated fabric will not stretch for maximum water resistance and repellency
- Elastic cord in bottom hem for a quick and custom fit
- Fits all Gator™ HPX, XUV 620i, XUV 625i, XUV 825i, XUV 855D, XUV 550, XUV560, XUV590, and RSX Utility Vehicles
Ordering information
Contact a local John Deere dealer for availability and pricing information.
Transportable vehicle cover - black
Order number: LP37040
Drawbar
The 48-mm (1-7/8-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.
The ball hitch is available through Service Parts.
The 51-mm (2-in.) ball hitch attaches to the drawbar or rear hitch to allow towing.
The ball hitch is available through Service Parts.
Drawbar
Rugged and versatile, this is not an ordinary front receiver hitch. Made from welded steel, the recovery loops are strong enough to pull even the toughest loads, and are perfect for securing the vehicle to a trailer. This receiver hitch serves as the platform for the winch base. The receiver-type front hitch accepts the 51-mm (2-in.) drawbar (sold separately).
Required for mounting BM23995 (Warn® winch – Gator™ XUV 550), BM24019 (Warn winch – XUV 550 S4), BM26248 (Warn winch – XUV560, XUV560 S4, XUV590, XUV590 S4), and BM24437 (Warn winch – RSX Utility Vehicle).
Warn is a trademark of Warn Industries, Inc.
Description:
- Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
- Steel construction has a 25-mm (1-in.) ball hole size
- Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
- Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
- Compatible with HPX 615 and 815 Utility Vehicles
- Compatible with XUV 620i and XUV 850D Utility Vehicles
NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.
Harnesses
The beacon light harness kit is required when installing the beacon light.
The kit includes the switch to mount in the operator protection system (OPS) switch bank and wire harness between the OPS switch bank and beacon light.
The brush guard light harness kit is required when installing the light kits to the brush guard or PreRunner bumper on the Gator™ RSX.
The kit includes the switches and wire harnesses.
The front OPS/roof light harness kit is required when installing the light kits to the front of the OPS or roof. Also requires OPS switch bank.
The kit includes the switch and wire harnesses from the OPS switch bank to the lights.
The rear OPS/roof light harness kit is required when installing the light kits to the rear of the OPS or roof. Also requires OPS switch bank.
The kit includes the switch and wire harnesses from the OPS switch bank to the lights.
Heater
The heater kit conveniently mounts under the storage tub, and provides both heat and defrost.
Parts in the kit:
- Heater core and blower
- Wire harness
- (2) 2-in. (25-cm) adjustable vents
- Windshield vent
- Three-position blower switch (off, low, high)
- Mounting hardware
Horn
Kit includes:
- Horn
- Mounting brackets
- Wire harness and switch
The switch mounts on the dash of the vehicle, while the wiring harness connects to the main vehicle harness.
Lighting
Features and benefits:
- 3-in. (76-mm) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
- Especially useful for working around properties and job sites
- Acrylic amber lens resists scratching and scuffing
- Impact-resistant nylon housing
- SAE J845 (Class 3)-compliant
- UL recognized
- Stands 4.4 in. (111.5 mm) tall
Compatible with the following vehicles:
- Model year 2006 to current Gator™ HPX Utility Vehicles
- Requires poly roof and operator protection system (OPS) switch bank for mounting
- Requires beacon light harness kit
- Gator XUV 620i and 850D Utility Vehicles
- Requires poly roof and OPS switch bank for mounting
- Requires beacon light harness kit
- Model year 2011 to current Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles
- Requires poly roof and OPS switch bank for mounting
- Requires beacon light harness kit
- Gator XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4 Utility Vehicles
- Requires OPS switch bank and brake/tail light for brake light mounting or OPS switch bank and poly roof for roof mounting
- Requires beacon light harness kit
- Gator RSX Utility Vehicles
- Requires OPS switch bank and brake/taillight for brake light mounting or OPS switch bank and poly roof for roof mounting
- Requires beacon light harness kit
Rigid Industries LED driving lights (two lights per kit)
Mounted on the front operator protection system (OPS)/roof or brush guard for extreme night driving lights.
Watts (per light) | AMP draw (per light) | LEDs (per light) | Raw lumens (per light) | Beam distance ft (m) | |
LED driving lights | 34.5 | 2.5 | 6 | 3030 | 942 (287) |
LED light specifications:
- 50,000+ hour lifespan
- IP69K certified
- Polycarbonate lens
- Aluminum housing
- Powder-coat finish
- Sealed Deutsch connectors
- Operating Temp -40°F – 145°F
- MIL810-STDG vibration certified
- ASTMB117 salt / fog certified
- Standard black lens covers
The LED lights are compatible with the HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, RSX Utility Vehicles.
These lights are not compatible with Jensen radios or deluxe cab frame.
The LED lights can be mounted on the brush guard, roof (front or rear), or directly on the OPS (front or rear). Roof or OPS mount requires the OPS Switch Bank. The LED light kits also require the necessary Light Harness Kit based on the desired light mounting location:
Part Number | Description |
BM25704 | LED driving lights |
BM25619 | Brush guard light harness kit |
BM25620 | Front OPS/roof light harness kit |
BM25731 | Rear OPS/roof light harness kit |
BM25621 | Rear OPS/roof light harness kit (S4s) |
Rigid Industries LED work lights (two lights per kit)
Ideally mounted on the front or rear operator protection system (OPS)/roof for light around the vehicle to work at all hours of the night.
Watts (per light) | AMP draw (per light) | LEDs (per light) | Raw lumens (per light) | Beam distance ft (m) | |
LED work lights | 20 | 1.45 | 4 | 1568 | 866 (264) |
LED light specifications:
- 50,000 or more hour lifespan
- IP69K certified
- Polycarbonate lens
- Aluminum housing
- Powder-coat finish
- Sealed Deutsch connectors
- Operating temperature - 40°F – 145°F (4°C-63°C)
- MIL810-STDG vibration certified
- ASTMB117 salt / fog certified
- Standard black lens covers
The LED lights are compatible with the Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, RSX Utility Vehicles.
These lights are not compatible with Jensen radios or deluxe cab frame.
The LED lights can be mounted on the brush guard, roof (front or rear), or directly on the OPS (front or rear). Roof or OPS mount requires the OPS switch bank. The LED light kits also require the necessary light harness kit based on the desired light mounting location:
Part Number | Description |
BUC10222 | LED work lights |
Review configurator for latest part numbers | Brush guard light harness kit |
Review configurator for latest part numbers | Front OPS/roof light harness kit |
Review configurator for latest part numbers | Rear OPS/roof light harness kit |
Review configurator for latest part numbers | Rear OPS/roof light harness kit (S4s) |
Product attributes:
- Accommodates up to three sets of OPS lights
- Allows for simple wire routing - only two wires run through the OPS or roll-over protective structure (ROPS) tubes; each light kit has its own switch and wiring harness
- Switches are located in the OPS or rollover protective structure (ROPS)
Compatible with:
- Model year 2011 - current Gator™ XUV, HPX Gas, HPX Diesel, and M-Gator A2 Non-Military Utility Vehicles
- Model year 2012-2013 Gator XUV 550, XUV 550 S4, and RSX Utility Vehicles
- Model year 2013 - current Gator XUV 825i S4 and XUV 855D S4 Utility Vehicles
- Current Gator XUV560, XUV560 S4, XUV590, and XUV590 S4 Utility Vehicles
Increase the capability of the Gator™ Utility Vehicle by adding work lights. Lights mount to the front or rear of the poly roof or directly to the operator protection system (OPS).
Kit includes the pair of work lights and hardware. Requires necessary light harness kit based on desired mounting location.
Lights can also be installed in a low mount position behind the front bumper.
Product attributes:
- This flood light kit provides a wide range of light, making it ideal for tasks at night
- Especially useful for working around properties and job sites
- Requires OPS switch bank when mounted to roof or OPS
Compatible with:
- XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590i, XUV590i S4
- HPX
- XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, and XUV 855D S4
- RSX Utility Vehicles
Mirrors
The OPS rearview mirror for Gator™ Utility Vehicles can be installed when equipped with an OPS.
The rearview mirror can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.
Product attributes include:
- Composite components made of impact resistance materials
- Installs with quick clamp to OPS tube
- Compatibility with all Gator Utility Vehicles equipped with an OPS
The OPS side mirrors for Gator Utility Vehicles can be installed when they are equipped with OPS.
The side mirrors can be positioned in multiple locations on the OPS and offers expanded visibility for the operator.
Product attributes include:
- Composite components made of impact-resistant materials
- Installs without tools and easily adjustable
- Compatibility with all Gator HPX, XUV 620i, XUV 850D, XUV 625i, XUV 825i, XUV 825i S4, XUV 855D, XUV 855D S4, XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, RSX, M-Gator A2, and M-Gator A3 Utility Vehicles equipped with an OPS
NOTE: OPS side mirrors are not compatible with the deluxe cab or poly cabs (poly cabs include standard mirrors).
The side mirrors are secured to the poly door and offers expanded visibility for the operator.
Product attributes include:
- Composite components made of impact-resistant materials
- Easily adjustable
- Compatibility with all Gator XUV550, XUV550 S4, and RSX Utility Vehicles equipped with the poly cab doors
Operator''s Station
This washable rubber floor mat provides an added layer of protection to the floor of the vehicle, and guards against dents, dings, and scratches.
Keep gear secure by adding the BM24200 glove box lock to Gator™ XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles.
The rear panel and doors kit is ideal for outdoor enthusiasts and others desiring four-season weather protection.
The operator protection system (OPS) poly cab comes with the rear panel/sliding rear window and doors with a sliding window. The user will also order the OPS poly roof (not compatible with sport roof) and one of the three following windshields:
- OPS full poly windshield
- OPS full no-scratch windshield
- OPS glass windshield with wiper
Turn heads with these stylish door closeout panels. These polycarbonate panels cover the opening in the doors and feature the Gator® eye screen printed to the surface, protected by a final layer of clear coat. The closeout panels have PVC foam around the perimeter of the panel to restrict vibration between the panel and door
Kit includes:
Left- and right-hand door closeouts, self-tapping screws
Compatible with:
All model year RSX Gator Utility Vehicles
The OPS rear panel for the OPS poly cab is ideal for outdoor enthusiasts and others desiring four-season weather protection.
The poly cab can be sold as individual components; OPS poly or glass windshield, OPS poly roof, OPS rear panel, and doors kit. This gives operators the flexibility to configure the vehicle to meet their unique needs.
The OPS rear panel can be coupled with the half or full windshield to help reduce dust and airflow in the operator’s station.
Key features of the rear panel:
- Rear panel is thermoformed from thick acrylonitrile butadiene styrene (ABS) plastic for impact resistance, durability, and style
- Three-piece sliding glass window, which provides excellent visibility and ventilation
- Installs in minutes with quick clamps to the OPS structure
Compatible with:
- XUV 550, XUV560, and XUV590 Utility Vehicles
- RSX Utility Vehicles
The must-have option to give the Gator™ RSX, XUV560, XUV560 S4, XUV590, and XUV590 S4 Utility Vehicles the customization they deserve. Color accents and a comfortable feel make this a must have for the sport enthusiast.
Radio
Enhance the Gator™ XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles by adding the stereo and speaker kit. The kit includes lights (not including brake light shown above), speakers, and a convenient netted pouch for extra storage.
The stereo and speaker kit can be easily mounted to the operator protection system (OPS) or rollover protective structure (ROPS) with the quick clamp mounting system. The waterproof top allows this kit to be used without a poly roof; however, it can be used with the poly roofs as well.
The operator must choose one of the following three head units to have complete stereo:
- SWJHD1120 stereo, heavy-duty AM/FM/weatherband/auxiliary
- SWJHD1620 stereo, heavy-duty AM/FM/weatherband//SiriusXM® satellite/iPod® device ready
- SWJHD3620 stereo, heavy-duty AM/FM/weatherband/CD/SiriusXM satellite/USB 2.0
- SWJDABIPDL iPod adaptor cable for SWJHD1620 and SWJHD3620
NOTE: Must order head unit through Parts.
NOTE: Installation requires AM140972 harness.
iPod is a trademark of Apple, Inc. Sirius is a trademark of Sirius XM Radio Inc.
Roof
Features of the canvas roof/rear panel:
- This canvas roof/rear panel is a single-piece construction that mounts to the top and rear of the operator protection system (OPS)
- Made from premium, heavy-duty 600 denier-solution dyed, water-resistant polyester with UV stabilizers, for mold and tear resistance
- Durable PVC window resists yellowing or cracking. Window opens easily with a zipper and can be secured in place with straps
- Installs in minutes
- Compatible with canvas doors on Gator™ XUV590i Utility Vehicles
- Compatible with poly doors
- Compatible with full flip-out poly windshield
- Not compatible with glass windshield
- Provides year-round weather protection to the operator and passenger when a Gator™ XUV 550 or RSX is equipped with an OPS or rollover protective structure (ROPS)
- Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
- One-piece, soft roof allows for tool-less attachment/detachment to the OPS or ROPS with four simple adjustable straps
- Heavy-weight polyester fabric for maximum durability and resistance to tear
- PVC coating provides for superior water resistance and repellency
- Compatible with the OPS rear screen, OPS poly windshields, and OPS organizer
- Compatible with the Gator XUV 550 and RSX Utility Vehicles
NOTE: Must be removed for transport on an open trailer or truck.
Ordering information
Contact the local John Deere dealer for availability and pricing information.
OPS soft roof - black
Order number: LP37046
- Provides year-round weather protection to the operator and passenger when a Gator™ XUV 550 or RSX is equipped with an operator protection system (OPS) or rollover protective structure (ROPS)
- Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
- One-piece, soft roof allows for tool-less attachment/detachment to the OPS or ROPS with four simple adjustable straps
- Heavy-weight polyester fabric for maximum durability and resistance to tear
- PVC coating provides for superior water resistance and repellency
- Compatible with the OPS rear screen, OPS poly windshields, and OPS organizer
- Compatible with the Gator XUV 550 and RSX Utility Vehicles
NOTE: Must be removed for transport on an open trailer or truck.
Ordering information
Contact the local John Deere dealer for availability and pricing information.
OPS soft roof - camo
Order number: LP37047
The OPS poly roof provides all-year-round weather protection to the operator and passenger. This roof is compatible with model year 2012 and newer mid-size XUV and RSX Utility Vehicles.
Features and benefits:
- Features the OPS quick-clamp mounting system – the one-piece acrylonitrile butadiene styrene (ABS) plastic roof easily attaches and detaches to the vehicle’s OPS or rollover protective structure (ROPS) with four clamps
- Sturdy design allows for the Gator™ utility vehicle to be towed at highway speeds while the roof is installed
- Useful for minimizing sun exposure to the operator, passenger, and operating station
- Molded-in water troughs route water away from the operator and passenger
- Acts as the foundation to build an OPS poly full-cab enclosure (designed to work with the OPS full windshield kits and OPS poly rear panel and doors kit)
- Compatible with a variety of OPS light kits
The OPS poly roof – camo provides all-year-round weather protection to the operator and passenger.
Features and benefits:
- Features the OPS quick-clamp mounting system; the one-piece ABS roof easily attaches/detaches to the vehicles operator protection system (OPS) or rollover protective structure (ROPS) with four clamps. No tools required.
- REALTREE HARDWOODS HD® camo pattern matches the camo Gator XUV Utility Vehicle
- Sturdy design allows for the Gator XUV 550, XUV590, or RSX to be towed at highway speeds while the roof is installed
- Useful for minimizing sun exposure to the operator, passenger, and vehicle operating station
- Molded-in water troughs route water away from the operator and passenger
- Acts as the foundation to build an OPS poly full enclosure (designed to work with the OPS poly full windshield kit and OPS poly rear panel and doors kit)
- Compatible with a variety of OPS lights kits
REALTREE HARDWOODS HD is a U.S.-registered trademark of Jordan Outdoor Enterprises Limited
Seat
Kit includes two comfort straps for the left and right seat belts.
- Provides relief to the operator's and passenger's upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
- Moves the upper mounting point of the seat belt down 6 in. (152 mm)
- Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
- Compatible with all model year 2017 - current Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, and RSX860i Utility Vehicles when equipped with standard Occupant Protective Structure (OPS)
- Compatible only with standard Occupant Protective Structure (OPS), for deluxe cab frame, order BM22703
Sprayers
The HP 45-gal. (170-L) Tow-Behind Sprayer offers the ultimate in performance and versatility. With a 45-gal. capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It is the perfect match for the customer who wants extreme performance.
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options; a 150 in. (3.8 m) precision folding, 120-in. (3-m) standard three tip, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).
HP features:
- 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 35 ft (10.7 m) stream
- Front-mount hose tender for easy hose access and storage
- Glycerin filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve
- Includes sprayer remote control
Additional features
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gal.)
Boom options (sold separately):
- 150-in. (3810-mm) precision spray boom
- 24-ft (288-in.) boomless spray nozzles
SHURflo is trademark of SHURflo, LLC. TeeJet is a registered trademark of Spraying Systems Company.
The 45-gal. (170-L) trail-type sprayer is equipped with a boom that sprays a wide, 120-in. width.
- Three nozzles for efficient broadcast spraying
- Boom folds up against the tank for storage
A 20-ft hose and handgun are provided.
- The 20-ft hose and handgun are helpful when spraying trees or other remote areas that cannot be reached with the sprayer itself
- A 14-in. wand on the handgun is standard equipment
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction.
- Low center of gravity gives excellent stability
- Equipped with a 4-position hitch
- Rear of the frame is designed so the sprayer will stand upright during storage to reduce the amount of space required
Additional features include:
- Diaphragm-type pump designed for high-hour commercial applications; it can be run dry without damage
- The spray wand is constructed of non-corrosive polypropylene material with Viton® components for remote spray jobs
- Two-wire fused wiring harness complete with quick-disconnects for convenient electrical hookup
- Large cap to easily fill up the tank
- Control valve to channel the spray to the boom or handgun
- Rugged translucent yellow tank with molded fill-level indicators (in gallons)
Specifications
Capacity | 45 U.S. gal. (170 L) |
Pump | |
Type | Electric motor |
Manufacturer | SHURflo® |
Operating pressure | 100 psi |
Current draw | 7 amp |
Valve material | Viton® |
Diaphragm material | Santoprene™ |
Strainer | Stainless steel |
Boom spray width | 120 in. (305 cm) |
Spray tip(s) | Three #11008VP |
Spray flow rate | 2.1 U.S. gpm (7.9 L/min) |
Remote spray method | 20-ft hose with adjustable polypropylene handgun with 14-in. wand |
Handgun material | Polypropylene with Viton components |
Adjustment | Fan-to-stream |
Tires | 15x6-6 pneumatic |
Wheel bearings | Roller bearings |
Axle diameter | 1 in. (2.5 cm) |
Hitch | Pin and spring clip, four height positions |
Weight - empty | 80 lb (36.3 kg) |
Weight - full | 456 lb (207 kg) |
Compatible with all Gator models except XUV 550, XUV 550 S4, and RSX Utility Vehicles.
Ordering information
Contact the local John Deere dealer for availability and pricing information.
45-gal. (170-L) tow-behind sprayer
Order number: LP20485
SHURflo is a U.S.-registered trademark of SHURflo, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
Sprayers
The 25-gal. (94.6-L) Gator™ bed sprayer is designed to work with the XUV 550 and RSX Series Gator vehicles. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and deicer. It comes complete with a 43-in. (1.1-m) boom that sprays a 120-in. (3-m) swath. It is equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable, brass spray wand tip achieves streams up to 30 ft (9 m). It comes equipped with rubber feet and custom brackets, which secure to the Gator bed for a no-tools mount.
Special features:
- 25 gal. (94.6 L) capacity
- Includes sprayer remote control for added convenience
- Brackets secure to Gator bed, no bungee or straps required
- No-tools mounting (after initial install)
- Convenient side mount hose wrap
This product requires accessory wire harness (AM140972) sold through John Deere.
Additional features:
- 100 psi SHURflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage
- The fully adjustable, brass spray wand tip achieves streams up to 30 ft (9 m)
- Equipped with a 19-ft (5.8-m) hand-wand hose with side-mount hose tender for convenience
- Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
- Remote control on/off switch with 100-ft (30-m) range
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill-level indicators (in gallons)
Ordering information
Contact a local John Deere dealer for availability and pricing information.
SHURflo is a trademark of SHURflo, LLC.
The 45-gal. (170.3-L) Gator™ bed sprayer is designed to work with the Gator XUV 550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Series Utility Vehicles. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It comes complete with a 43-in. (1.1-m) boom that sprays a 120-in. (3-m) swath. It is equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9 m). It comes equipped with rubber feet and custom brackets, which secure to the Gator bed, for a no-tools mount.
Special features:
- 45-gal. (170.3-L) capacity
- Includes sprayer remote control for added convenience
- Brackets secure to Gator bed, no bungee or straps required
- No tools mounting (after initial install)
- Convenient side mount hose wrap
This product requires accessory wire harness (AM140972) sold through John Deere.
Additional features:
- 100 psi SHURflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.
- The fully adjustable brass spray wand tip achieves streams up to 30 ft (9 m)
- Equipped with a 19-ft (5.8-m) hand wand hose with side mount hose tender for convenience
- Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
- Remote control on/off switch 100-ft (30.5-m) range
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Ordering information
Contact the local John Deere dealer for availability and pricing information.
SHURflo is a trademark of SHURflo, LLC.
The high-performance bed sprayer is designed to work with Gator™ XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles. With a 45-gal. (170.3-L) capacity, high-volume electric pump, and premium pistol-grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It is the perfect match for the operator who wants extreme performance. Custom brackets secure the sprayer to the cargo bed for a no tools mount. Cover ground quickly with flexible boom options; a 150-in. (3810-mm) precision folding, 120-in. (3048-mm) standard 3-tip, 30-ft (9.1-m) boomless, or no boom at all (boom sold separately).
High-performance features:
- 45 psi, 3.6 gpm SHURflo™ diaphragm-type pump is designed for high-hour applications and can be run dry without damage
- Premium pistol-grip spray gun, designed for single-hand mist to 35-ft (10.7-m) stream
- Side-mount hose tender for easy hose access and storage
- Glycerin-filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve
- Includes sprayer remote control (LP22912)
Boom options (sold separately):
- Choice of standard boom (LP22911)
- 150-in. (3810-mm) precision spray boom (LP22885)
- 24-ft (7.3-m) boomless spray nozzles (LP22884)
Additional features
- Custom-engineered brackets secure to Gator cargo bed with no tools or additional straps (after initial set up)
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Ordering information
Contact the local John Deere dealer for availability and pricing information.
45-gal. (170.3-L) high-performance sprayer
Order number: LP39098
The standard Gator boom is compatible with all Gator sprayer models and is sold separately for the HP Gator sprayers. This fixed boom is conveniently sized at 43 in. (1.1 m) and does not extend wider than the Gator bed, but it is perfect for covering ground quickly and thoroughly with a 120-in. (3-m) spray swath.
The boom is ideal for basic spraying application. Three tips and check valves round out this offering (boom only, mounting brackets are provided with sprayers).
Boom Features:
- 43-in. (1.1-m) boom with three tips
- Check valves prevent siphoning and dripping
- Sold separately for:
- HP 45-gal. Gator Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
The 150-in. (3.81-m) precision boom is compatible with the HP sprayers. This folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet™ nozzle bodies and commercial grade diaphragm check valves. The outer tips offer versatility with built-in shut offs to allow an adjustable 90-in. (2.3-m), 120-in. (3-m), or 150-in. (3.8-m) spray swath.
150-in. (3.8-m) precision boom features:
- Folding spring hinge
- Breakaway design
- Five TeeJet tips and nozzle bodies
- Adjustable spray swath (90 in., 120 in., 150 in.)
- 1/2-in. industrial-grade rubber hose
- Designed to work with
- HP 45-gal. Gator™ Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
TeeJet is a registered trademark of Spraying Systems Company.
The 24-ft (7.3-m) boomless spray nozzles are compatible with all HP sprayers. This boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary. TeeJet™ nozzle bodies and commercial grade diaphragm check valves round out this offering.
Boomless spray nozzles feature
- Three TeeJet tips and nozzle bodies
- Commercial-grade diaphragm check valves
- 1/2-in. (12.7-mm) industrial-grade rubber hose
- Designed to work with all HP sprayers :
- HP 45-gal. Gator™ Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
TeeJet is a registered trademark of Spraying Systems Company.
Spreaders
- 17-ft3 capacity
- 1000-lb load limit
- Copolymer polypropylene is compression molded for optimum thickness in all areas and maximum durability
- Heavy-duty, reinforced structural frame with a 25.4-mm (1-in.) diameter, one-piece axle to handle weight, speed, and bumps
- Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
- Double-sealed, high-speed roller bearings to handle a 48-km/h (30-mph) maximum speed
- Heavy-duty polyethylene bed
- Accepts dividers to separate cargo (template included)
- All-terrain knobby tires
- Provides good flotation and traction in mud, sand, and other wet or soft areas
- Flexes over bumps and ruts for a smoother, more controlled ride
- Minimizes ground compaction to save turf and prevent ruts in soft ground
- Poly fenders to keep the operator, cart, and vehicle clean
- Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1-7/8-in.) ball hitch, including Gator™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models
- Quality and styling compatible with other John Deere equipment
Ordering information
Contact the local John Deere dealer for availability and pricing information.
17AT Cart
Order number: LPPCT17ATJD
The Gator™ electric fertilizer spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator Utility Vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator salt spreader. Convenience is at the operator’s fingertips with an electronic variable-speed spinner and electronic gate control from the Gator seat. Adjustable flighting allows spread pattern control to make sure the material is applied where it is needed.
Features:
- Powder-coated steel frame
- Electronic variable-speed spinner
- Electrically actuated control of the flow gate
- 10-in. (25.4-cm) diameter spinner is stainless steel with adjustable flighting to control spreader pattern
- 8:1 ratio with bronze gear, grease filled
- Motor is 1/3 hp, 12-V DC, semi sealed
The mounting hitch and control box are sold separately, available through Order Zone.
Ideal for:
- Granular fertilizer
- Seed
- Granular pesticide
- Granular herbicide
Capacity:
- Volume: 3.0 cu ft (0.1 cu m)
- Weight: 240 lb (108.9 kg)
- Spreading width: up to 20 ft (6.1 m)
Includes:
- Side deflector
Compatibility:
- Compatible with all model year 2011 to current heavy-duty Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.
- Compatible with all XUV560 and XUV560 S4 Utility Vehicles.
- Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch-mounting brackets, sold separately through Order Zone.
Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.
The Gator™ electric salt spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator fertilizer spreader. The Gator salt spreader features an electric-driven auger for consistent salt presentation to the spinner. It draws power from the Gator vehicle, so no external power source is needed. It is powered by a variable-speed controller (sold with hitch) for precise spread pattern control.
Features:
- Powder-coated steel frame
- Spinner motor controlled using the vehicle’s 12-V system
- 10-in. (25.4-cm) diameter spinner is nylon/glass reinforced resin for ultimate corrosion resistance
- 5:1 ratio with bronze gear, grease filled
- Motor is 1/3 hp, 12-V DC, semi sealed
The mounting hitch and control box are sold separately. Available through Order Zone.
Ideal for:
- Salt and large granular materials
Capacity:
- Volume: 3.0 cu ft (0.1 cu m)
- Weight: 240 lb (108.9 kg)
- Spreading width: Up to 20 ft (6.1 m)
Compatibility:
- Compatible with all model year 2011 to current heavy-duty XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.
- Compatible with all Gator XUV560 and XUV560 S4 Utility Vehicles.
Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch mounting brackets, sold separately through Order Zone.
Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.
The mid-size XUV/RSX Gator™ Utility Vehicle hitch and electric control box for the salt/fertilizer spreader is engineered to fit the mid-size XUV/RSX Gator vehicle. This spreader hitch frame is designed with a versatile spring-loaded mechanism to allow quick and secure attach/detach capabilities of the spreader. The hitch can easily be lowered, by the use of spring-loaded pins, promoting easy bed or engine access.
The electronic control box is designed to operate both the Gator Fertilizer and Salt Spreader. The fully electronic control box accommodates a variable speed spinner control for both spreaders, and electronically actuated gate control for the fertilizer spreader. The weather-resistant box includes the switches, wiring, and hardware for convenient dash mounting, allowing full control from the seat of the Gator.
Includes:
- Spreader hitch frame
- Electronic control box and wiring
Compatibility:
A Gator spreader is required, two models are available:
- 3 cu ft (0.08 m3) Gator Salt Spreader
- 3 cu ft (0.08 m3) Gator Fertilizer Spreader
Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.
Dealer Use Only:
John Deere dealers can refer to the John Deere Order Zone site for ordering and pricing information on Order Zone products.
Storage
Increase storage capacity on Gator™ XUV 550, XUV 550 S4, and RSX Utility Vehicles by adding the OPS overhead organizer to the OPS or rollover protective structure (ROPS) of the vehicle.
Product attributes:
- Three large cargo compartments, zippered mesh pockets, and pockets for tools and other small items keeps gear organized
- Heavy-weight polyester fabric for maximum durability and resistance to tear
- PVC coated for maximum water resistance and repellency
- One-piece design easily attaches and detaches to the OPS or ROPS with four straps - no tools required
- Compatible with the OPS rear screen, OPS soft roof, and OPS poly roof
- Compatible with Gator XUV 550, XUV 550 S4, and RSX Utility Vehicles
Ordering information
Contact the local John Deere dealer for availability and pricing information.
OPS overhead organizer - black
Order number: LP37044
Suspension
- RSX-tuned piggyback shock from Fox Racing Shox®
- Fully adjustable spring preload for different driving styles and ride height settings.
- Piggyback reservoir houses high-pressure nitrogen gas, separated from the damping oil by an internal floating piston (IFP). The separation prevents aeration (frothing) and viscosity degradation of the oil which improves damping consistency and performance fade.
- Large, 2.0 aluminum bodies help reduce internal pressures and improve heat dissipation, which results in consistent fade-free performance in aggressive riding conditions.
- Compression adjustment allows the user to tune damping rates for different riding preferences and trail conditions.
- Tuned with Fox Factory support on some of the most grueling trails in the United States.
- Standard equipment with the sport package configuration.
Fox Racing Shox is a U.S.-registered trademark of Fox Factory Incorporated.
Turn Signals
The deluxe light kit includes turn signals (front and rear) and four-way flashers. The switches mount on the dash of the vehicle, and the wiring harness connects to the standard vehicle harness.
Compatible with occupant protective structure (OPS) poly roof and OPS poly sport roof.
Compatible with Gator™ RSX Utility Vehicle.
NOTE: Not intended for use on public roadways
Winch
This winch also requires a winch mount kit and a 50.8-mm (2-in.) front receiver with recovery loops.
Parts in the kit:
- WARN ProVantage 1587.6-kg (3500-lb) winch
- Roller fairlead assembly
- Hook
- Hook strap
- 3-m (10-ft) hand-held remote
- Winch contactor
WARN and ProVantage are trademarks of Warn Industries, Inc.
Double the pulling power, change the pulling direction, and keep the winch in proper working order.
The accessories kit is essential gear for operators getting the most out of their winch:
- Effectively anchors to trees/boulders
- Change the pulling direction
- Double the pulling capacity
The accessories kit includes:
- Flexible tree strap
- Snatch block
- Shackle
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
Key features
- Wirelessly control winch from up to 15 m (50 ft) away
- Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
- Colored light-emitting diode (LED) lights provide clear operator feedback
- Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware
Compatibility
- Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Winch Mounting Kit
The winch mounting kit is required to mount the Warn® winch to the vehicle. The kit includes:
- Winch fairlead support
- Winch power cables
- Winch wiring harness
- Harness bracket
- Mounting hardware
Warn is a trademark of Warn Industries Incorporated.
Windshield
The abrasion-resistant half windshield is an excellent solution for operators that want to deflect the main force of wind, but still allow airflow through the operator’s station.
- Made with high-impact-strength abrasion-resistant polycarbonate material
- No tools required - features the operator protection system (OPS) quick-clamp mounting system. The windshield attaches to the OPS or rollover protective structure (ROPS) with two quick clamps, making attaching and removing quick and easy
NOTE: Picture shown is canvas roof/rear panel. Canvas rear panel would be rear portion only.
Features of the canvas rear panel:
- Made from premium, heavy-duty 600 denier-solution dyed, water-resistant polyester with UV stabilizers, for mold and tear resistance
- Durable PVC window resists yellowing or cracking. Window opens easily with a zipper and can be secured in place with straps.
- Installs in minutes
- Installed with full windshield and roof will help keep dust out of operator station
- Compatible with poly roof, canvas doors, poly doors
NOTE: Windshield is not tinted; picture is tinted to show details
The OPS poly full windshield is available for Gator XUV 550, XUV 550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles when equipped with an operator protection system (OPS) or rollover protective structure (ROPS) to provide additional protection for the operator and passenger.
- Manufactured from super premium, two-sided Makrolon AR grade abrasion-resistant polycarbonate.
- Increased UV longevity – resists yellowing longer than optical grade polycarbonate
- Increased chemical resistance over traditional optical grade polycarbonate
- Almost as hard as glass with greater impact strength
- 30 times less prone to scratching than standard poly windshield
- Designed to permit unfettered access to under-hood storage areas and service points (no tools required)
- Upper panel may be infinitely positioned to allow desired amount of ventilation
- Seals against the hood, OPS, and optional OPS roof
- Features the OPS quick-clamp mounting system; attach to/detach from the OPS or ROPS with ease
Expand the comfort and enjoyment of the Gator™ Utility Vehicle with the addition of the OPS glass windshield with integrated wiper kit. This windshield offers superior visibility that is clear and distortion free.
This durable, laminated glass windshield comes equipped with a standard windshield wiper.
No matter what the condition, the occupants of the vehicle will be protected from the elements; the lower section of the windshield seals tightly against the hood of the vehicle.
Requires the OPS switch bank.
The OPS glass windshield with wiper is compatible with OPS poly roofs, poly doors, side-mounted mirrors, and front hood racks.
Especially useful for working around properties and job sites, the windshield washer kit includes these components:
- Mounting hardware
- Spray nozzle
- Large reservoir with electric pump, harness, and hose
- Three-position backlit rocker switch: off, wiper, washer
The reservoir assembly bolts to the frame. A convenient three-position rocker switch controls the windshield wiper and washer fluid. As with all Gator™ Utility Vehicle electrical kits, the washer kit ties into the vehicle's wiring harness for quick installation.
Compatible with the following vehicles:
- All Gator model year 2011-current HPX, XUV 625i, XUV 825i, XUV825i S4, XUV 855D, XUV855D S4, and M-Gator A3 Utility Vehicles
- All Gator model year XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
The operator protection system (OPS) poly rear window is an excellent solution for operators seeking to reduce dust and air flow throughout the operator station when coupled with a half or full windshield. Made out of high-impact-strength abrasion resistant polycarbonate material, this rear window is highly durable and scratch resistant. It also attaches to and detaches from the OPS or rollover protective structure (ROPS) with ease, thanks to the quick-clamp mounting system.
Compatible with model year 2017 Gator XUV560, XUV590, and RSX Utility Vehicles.
Prior to model year 2017, this is compatible with two-passenger XUV550, XUV560, XUV590, and RSX Utility Vehicles.