WC1205
Wood Chippers
- Pull-type unit with drawbar
- Adjustable discharge chute
- Reversible, hydraulic feed roll
Maintenance Plans
View Product Brochure
Features
Adjustable discharge chute with handle
Rotates 360 degrees
The discharge chute rotates 360 degrees for fast and easy positioning.
The chute also features an adjustable deflector to accurately direct the wood chips to the desired location.
WC12 Series hydraulic feedroll frame
The hydraulic feedroll is mounted on a spring-loaded frame on the WC12 Series Wood Chippers, allowing it to raise up and down depending on the size of the timber going through.
The speed of the feedroll can be adjusted on the side of the wood chipper with the hydraulic flow valve.
Feed box with handle
Reversible feedroll
Engagement of the feedroll is done by pushing or pulling the handle that wraps around the outside of the feed box. The feedroll has three positions: neutral, reverse, feed (forward).
The feedroll grabs the material as it is fed into the chipper and allows the operator to step away while it automatically pulls material into the knives.
This factory-installed, self-contained hydraulic kit is for tractors with less than 22.7 L/min (6 gpm) of hydraulic capacity or with no available rear selective control valves (SCVs). The kit contains a hydraulic reservoir and power take-off (PTO) driven hydraulic pump.
Specifications
Compare the specifications of up to 4 models
| Dimensions | WC1205 Current Model |
|---|---|
| Chip opening | 229x406 mm 9x16 in. |
| Hopper opening | 711x1067 mm 28x42 in. |
| Feed options | |
| System | Hydraulic |
| Feed_x001A_roller diameter | 393.7 mm 15.5 in. |
| Hopper height | 68.6 cm 27.5 in. |
| Chip chute | |
| Fixed | |
| Adjustable | Rotation: 360 degree (angle) |
| Weights | |
| Unit | 1161.2 kg 2560 lb |
| Rotor style | Drum |
| Rotor | 222.3 kg 490 lb |
| Tractor compatibility | |
| PTO rpm | 540 rpm |
| HP range (Tractor PTO hp) | 56-86 kW 75-115 hp |
| 3-Point hitch | |
| Category | Pull-type |
| iMatch™ or Quik-Coupler | |
| Hydraulics | |
| Requirements | 30.3 L/min 8 gpm |
| Self-contained system | Optional |
| Chipping | |
| Knife quantity | Two |
| Knife size | 1.59x11.43x22.86 mm 0.625x4.5x9 in. |
| Knife bolt | Gr 8 hex head bolts: 15.9 mm 0.625 in. |
| Shear bar | A8 Hardened Anvil |
| Rotor rpm | 2050 rpm |
| Belt drive system | |
| Number | Five |
| Type | B-7 banded belt |
| Set-up time | |
| Warranty | |