TS 4X2 UTILITY VEHICLE
Traditional Utility Vehicle
- Best in class work capability
- Enhanced stability for better performance in difficult terrain
- Best in class durability
- Freight not included in list price
Apply For FinancingBuy OnlineMaintenance Plans
60 Day Promise
Features
Large, durable cargo box for heavy hauling
The strong, 16-gauge cargo box allows hauling heavy and bulky cargo.
The load of the box is placed directly over the rear wheels, where the load is in the most stable position. The 64 cm (25-in.) load height for the Gator™ TS allows easy loading and unloading of material.
Box capacity
Gator TS |
|
Volume |
286 L3 |
Weight |
227 kg (500 lb) |
- A prop rod is provided to hold the box in the upright position for operator convenience.
Box dump angles (degrees)
Gator TS |
|
Manual dump | 48.5 degrees |
Power dump | 47.5 degrees |
The tailgate can be opened or removed for easier cleanout and to carry longer items.
The box design includes tie-downs on load guard and box sides.
CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.
Precision-engineered drive system
Power is transmitted from the engine, through a continuously variable clutch system, to a transaxle. Power is transmitted from the transaxle directly to the rear axle.
Key elements of the drive system are as follows:
Variable-speed drive
The variable-speed drive consists of two clutches connected by a drive belt:
- Drive clutch is attached to and rotated by the engine.
- Driven clutch is attached to and drives the transaxle.
- Infinite selection of speeds (0 kph to 32 kph [0 mph to 20 mph])
- No shifting necessary as operator increases speed
- Adjusts speed to the load to avoid bogging down when going up a hill or through challenging conditions because the wrong gear was selected
How the variable-speed drive works:
- As the engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
- As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
- With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
- The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts the drive speed upward or downward, so the engine rpm remains constant at constant throttle position.
Transaxle
The transaxle is fully enclosed and runs in oil for reliability.
Helical gears are used for quiet operation.
Differential design reduces scuffing of the turf during turns because the inside wheels turn slower than the outside wheels (vehicles that have a solid axle shaft must skid the inside wheel when making a turn).
Traction assist (differential lock) is built into the transaxle:
- Allows locking the rear drive wheels together
- Provides increased traction in tough spots
A neutral start safety interlock is provided for the engine ignition system.
Heavy-duty rear axle housings
Gator TS 4X2
Bolt-on cast-aluminum rear axle housings provide an extremely strong supporting structure.
- Large, sealed bearings are located inside the housing for better protection
- Forged-splined shaft for increased torsional strength
Gator TX 4X2
One-piece forged axles are splined for maximum strength.
- Large sealed bearings for better protection and load-carrying capabilities
- Forged-splined shaft for increased torsional strength
- Nodular cast-iron housing for increased durability
Features operating conveniences such as cushioned bucket seating, cup holders, 12-V outlet, glove box, and fuel gauge
Numerous features offer the operator and passenger a comfortable ride and provide many operating conveniences.
- Side-by-side bucket seating provides room for one operator and one passenger
- Hip restraints serve as a handhold and help keep the operator and passenger in their seats over rough terrain
- Both seats tilt forward for dry storage and ease of service
- Choice of adjustable driver's seat attachment
- Hour-meter is standard to assist in maintaining regular service intervals
- Integrated cupholders
- 12-V outlet is located on the instrument panel
The control location and walk-through platform provide easy entry/exit for the operator and passenger.
- All models feature a park brake indicator light, hour-meter, and tank-mounted fuel gauge as standard equipment
- Traction assist (differential lock) is hand operated and conveniently located between the operator and passenger seats
- Traction assist indicator light (Gator™ TH 6X4 only)
- Glove box is located in the dash to provide a convenient storage area for small tools and operator's manual
- Grab bar is provided for the passenger
- Center-mounted key switch
- Additional storage is provided between the seats
Specifications
Key Specs | ts-4x2-utility-vehicle Current Model |
---|---|
Engine power | 10.1 kW 13.5 hp |
Cargo box dimensions | 1003 x 1245 x 229 mm 39.5 x 49 x 9 in. |
Cargo box capacity (weight) | 227 kg 500 lb |
Towing capacity | 408 kg 900 lb |
Front suspension | Independent spring-over-shock, single A-arm |
Rear suspension | Two high-floatation, low pressure tires (solid axles) |
Final drive | Fully enclosed; oil bath |
Four wheel drive | No |
Fuel capacity | 18.9 L 5 U.S. gal. |
Engine | |
Type | Four-cycle gas |
Displacement | 400 cc 24.4 cu in. |
Power | 10.1 kW 13.5 hp |
Cooling system | Air |
Drivetrain | |
Transmission | Continuously Variable Transmission (CVT) |
Final drive | Fully enclosed; oil bath |
Four wheel drive | No |
Traction assist | Mechanically activated differential lock |
Descent control | No |
Suspension | |
Front | Independent spring-over-shock, single A-arm |
Rear | Two high-floatation, low pressure tires (solid axles) |
Brakes | |
Type | Wet disk in transaxle |
Park brake | Wet disk, hand operated |
Tires / Wheels | |
Front | Two 22.5x10-8 4PR all-terrain on steel wheels Two 22.5x10-8 4PR turf on steel wheels |
Rear | Two 25x13-9 4PR all-terrain on steel wheels Two 25x12-9 4PR turf on steel wheels |
Dimensions / Capacities | |
Wheelbase | 1770 mm 69.7 in. |
Weight | Dry: 415 kg 915 lb |
Length | 2642 mm 104 in. |
Width | 1525 mm 60 in. |
Height | 1108 mm 43.6 in. |
Tread centers | Front: 1270 mm 50 in. Rear: 1220 mm 48 in. |
Ground clearance | Transaxle: 152 mm 6 in. Foot platform: 249 mm 9.8 in. |
Fuel capacity | 18.9 L 5 U.S. gal. |
Cargo box dimensions | 1003 x 1245 x 229 mm 39.5 x 49 x 9 in. |
Cargo box capacity (weight) | 227 kg 500 lb |
Payload capacity | 408 kg 900 lb |
Towing capacity | 408 kg 900 lb |
Hitch | Optional: 3.175 cm 1.25 in. |
Features | |
Color | Green/yellow |
Power steering | No |
Battery / Alternator / Power port | Battery: 12 V 340 CCA Alternator: 16.6 amp DC outlet: 12 V |
Instrumentation | Fuel gauge, hour meter |
Storage | Cup holders, glove box |
Seating | Bucket seats |
Accessories and Attachments
Backup Alarm
Bumper
Composed of strong tubular steel, the front bumper protects the front of the Gator™ Utility Vehicle.
Composed of strong tubular steel, the heavy-duty bumper and brush guard protect the unit from front impacts, as well as add increased protection to the grille and headlights.
Compatible with:
- TS, TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles
The front fender guard is composed of strong tubular steel that protects the unit from side impacts.
NOTE: The front bumper is standard on the Gator™ TH 6x4 Diesel.
The front fender guard requires BM23458 front bumper or BM23459 heavy-duty bumper/brush guard.
Cargo Box
The rubber mat is used to provide a surface that has grip and to protect the bottom of the cargo box from scratching.
The power lift kit utilizes an electromechanical actuator for easy raising and lowering of the Gator™ cargo box. A switch is conveniently located on the dash to operate the power lift kit.
It is compatible with the following vehicles:
-
Standard Series Gator - 4X2, 4X2 Turf, 6X4, and 6X4 Diesel
-
Traditional Series Gator TS 4X2
The poly bedliner is used to provide a surface that protects the bottom of the cargo box from scratching.
This kit includes a bracket assembly that quickly mounts to the deluxe cab structure.
It is compatible with the following vehicles:
-
Traditional Series—TS, TX, TX Turf, and TH 6x4 when equipped with a soft-door or
hard-door cab
The side storage box offers over 0.03 m3 (1 cu ft) of storage space to keep valuable items dry and secure.
The side storage box is:
-
Lockable
-
Weather resistant
It is compatible with:
Gator™ TS, TX, TX Turf, TE Utility Vehicles
XUV 620i and 850D Utility Vehicles
HPX Gas and Diesel Utility Vehicles
Not compatible with Sunshade
NOTE: The side storage box fits the driver side only.
Cover
The cover provides heavy-duty protection for Gators.
- Dual reinforced air vents let air circulate and help to prevent ballooning in windy conditions
- Reinforced rear corners for added stability
- Fabric-coated for maximum water resistance and repellency
- Elastic shock cord in the bottom hem for a quick custom-like fit
- Large size fits all standard and traditional series Gators
Ordering information
Please contact the local John Deere dealer for availability and pricing information.
Gator cover (large)
Order number: LP93547
The deluxe thick-cushioned seat cover provides superior protection, all day riding comfort, and lots of storage.
-
Two side mesh stuff beverage pockets hold drinks and a big rear zippered cargo pocket and mesh stuff pocket keep tools and gear readily available
-
Little zippered side key
-
Elastic cord in the hem provides a custom fit
-
Handy fabric storage case and John Deere key ring
-
Three-year warranty
Ordering information
Contact the local John Deere dealer for availability and pricing information.
Deluxe seat cover (medium)
Order number: LP92624
The cover protects unused seats and renews worn seats:
- Cushioned for extra comfort
- Four convenient pockets keep tools and gear within reach
- Central water drain hole keeps water from pooling
- Elastic cord at the hem for a custom fit
- Medium size fits backrests up to 15 in.
- Large size fits backrests up to 18 in.
- Two-year warranty
Compatible with Gator™ TS Utility Vehicles.
Ordering information
Contact the local John Deere dealer for availability and pricing information.
Seat cover (medium)
Order number: LP92324
-
Provides year-round weather protection to a vehicle equipped with an operator protection system (OPS) or full enclosure (cab)
-
Heavy-weight polyester fabric for maximum durability and resistance to tear
-
Polyurethane-coated for maximum water resistance and repellency
-
Dual reinforced air vents let air circulate and help to prevent ballooning in wind
-
Reinforced rear corners for added durability
-
Elastic shock cord in the bottom hem for a quick custom-like fit
-
Compatible with the following models:
-
Traditional Series models (TS, TX, TX Turf, TH 6x4, TH 6x4 Diesel, and TE when equipped with a full enclosure), and HPX 4x4, HPX 4x4 Diesel, HPX 4x4 Trail, XUV 620i, and XUV 850D (with OPS or deluxe cab structure and accessories)
-
Gator™ model year 2011 XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles (with OPS or deluxe cab structure and accessories)
-
Ordering information
Please contact the local John Deere dealer for availability and pricing information.
Vehicle cover (full size—cab or structure)
Order number: LP93107
Drawbar
This kit includes a 32-mm (1.25-in.) solid steel drawbar, galvanized cross pin, and hitch pin kit. It does not include a ball hitch.
The drawbar kit may be used on the front or rear of the utility vehicle.
Front Rack
Horn
Kit includes:
-
Horn
-
Mounting brackets
-
Wire harness and switch
The switch mounts on the dash of the vehicle. The wiring harness connects to the main vehicle harness.
Compatible with following vehicles:
-
CS, CX, TS, TX, TX Turf, TH 6x4, M-Gator™ A1
NOTE: This kit comes less grease.
Lighting
The beacon light is ideal for those who are looking to provide additional awareness for bystanders.
The beacon light kit - 48 V is available for Gator™ Utility Vehicles equipped with a deluxe hard or soft cab and can also be mounted without a cab:
- Dual voltage compatible, 12 V (TS, TX, TX Turf, TH) or 48 V (TE)
- Dash-mounted on/off rocker switch
- LED strobe light
- Durable nylon housings and scratch-resistant acrylic lens
- Sealed against water, dust, and corrosion
- UL-recognized SAE J845 (class 3)
- Flash rate of 60 + 10 fpm
- Low current draw of 0.2 amp
- Use of LED technology provides excellent resistance to damage from external shock and 100 times the useful life of an incandescent lightbulb
- Measures 1.8 m (74 in.) off the ground when mounted to the hard or soft cab and when mounted to the upright
- Compatible with Gator TS, TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles
Rotary light provides excellent visibility to vehicle bystanders:
-
Especially useful for working around properties and job sites
-
Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the light installed
-
Contains a breakaway mounting system
-
Sealed package (waterproof)
-
Amber lenses are rugged, shatter-resistant poly material
-
-
Light assembly bolts to the rear of the cab frame
-
Convenient overhead mounted on/off rocker switch for easy operation
-
As with all Gator electrical kits, the light kit ties into the vehicle's wiring harness for quick installation
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator A1 when equipped with a hard-door cab and electrical kit
This kit includes brake lights and taillights. The brake and taillight assembly mount directly to the cargo box. The wiring harness connects to the standard vehicle harness.
NOTE: The kit is not intended for use on public roadways.
Compatible with the following models:
- All model year 2004-2017 Gator™ HPX Utility Vehicles
The deluxe light kit is compatible with Gator™ Utility Vehicles with or without a cab.
Compatible with the following models:
- Traditional Series
- All model year TS vehicles
- Model year 2009 and prior TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE vehicles with steel cargo box
Two 55-W halogen lights provide superb visibility for nighttime operation:
-
Especially useful for working around properties and job sites
-
Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the lights installed
-
Light assemblies bolt to the front of the cab frame, creating a consistent lighting pattern
-
Convenient overhead-mounted on/off rocker switch for easy operation
-
As with all Gator electrical kits, the light kit ties into the vehicle's wiring harness for quick installation
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator A1 when equipped with a hard-door cab and electrical kit
-
Interior overhead light provides visibility for nighttime operation
-
Light assembly bolts into the overhead panel of the cab for automotive styling
-
Contains an on/off rocker switch for easy operation
-
As with all Gator electrical kits, the light kit ties into the vehicle's wiring harness for quick installation
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles
-
All Gator HPX model year 2004 to current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
Traditional Series—TS, TX, TX Turf, and TH 6x4 when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator A1—when equipped with a hard-door cab and electrical kit
One 55-W halogen light provides superb visibility for nighttime operation:
-
Especially useful for working around properties and job sites
-
Sturdy design allows the Gator to be hauled on a trailer forward or backward at highway speeds with the lights installed
-
Light assembly bolts to the rear of the cab frame, creating a consistent lighting pattern
-
Convenient overhead-mounted on/off rocker switch enables easy operation
-
As with all Gator electrical kits, the light kit ties into the vehicle's wiring harness for quick installation
Compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
All Gator HPX model year 2004 to current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame and electrical kit
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator A1 when equipped with a hard-door cab and electrical kit
Mirrors
-
Rigid design allows the Gator™ to be hauled on a trailer forward or backward at highway speeds with the mirrors installed
-
Adjustable mirror assembly bolts to the cab structure
-
Contains a breakaway mounting system
Compatible with the following vehicles:
-
Traditional Series - TS, TX, TX Turf, TE, and TH 6X4 - when equipped with a soft-door or hard-door cab
-
M-Gator™ A1 when equipped with a hard-door cab
Operator's Station
The deluxe glass cab includes front windshield (excluding wiper), glass doors, and glass rear window.
For use on the following Gator Utility Vehicles:
- TS, TX, TH 6X4 Gas, TH 6X4 Diesel, M-Gator A1, TE, and TX Turf
Features
- Rollover protective structure (ROPS) certified
- Rear glass window opens to allow ventilation
- Front windshield can be opened in two positions for ventilation
- Gas cylinders counter-balance the weight of the windshield when opened
- Lower front windshield panel is removable without tools, allowing access to remove vehicle hood for service
- Lockable glass doors
- Wide variety of individual accessories allows for customizing of cabs
NOTE:
- BM21653 remote cargo box release kit is required if vehicle is not equipped with cargo box power lift. BM21653 is for use with the TS and steel cargo boxes and is not compatible with model year 2010 to current utility vehicles (deluxe cargo box) or M-Gator A1.
- BM24804 remote cargo box release kit is required for model year 2010 to current utility vehicles with the deluxe cargo box and is not equipped with a cargo box power lift.
- Heavy-duty front suspension kit is recommended.
Required to power electrical cab accessories, this kit includes an overhead console to mount switches that operate electrical accessories, the main cab harness, the 30-A fuse holder, the 30-A fuse, and the roof padding.
Compatible with the following vehicles:
-
Traditional Series—TS, TX, TX Turf, TH 6x4, and TH 6x4 Diesel when equipped with a soft-door or hard-door cab
-
M-Gator™ A1—when equipped with a hard-door cab
Washable mat protects the floor and minimizes dust, debris, and noise in the operator station.
Compatible with Gator™ TS 4X2, TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TX Turf, and TE Electric-145 Utility Vehicles.
The forced-air heater kit uses a dash-mounted heater powered by gasoline from the vehicle's fuel system. Since the heater is using fuel instead of warm coolant from the engine to generate heat, the cab heat is available more rapidly. The desired cab temperature can be reached with or without the engine running.
-
Dash-mounted, five-position control dial to adjust for operator comfort
-
Position 1 is off
-
Positions 2 to 5 offer four heat levels (low, medium, high, and boost, respectively)
-
LED indicator light for operation
-
Dash-mounted, directional louver provides windshield defrosting and complete operator comfort
-
Second outlet provides heat to the foot well area
-
Compatible with the following T Series models: TS, TX, TX Turf, and TH 6x4 (gas)
Specifications
-
Heat output of 0.8 kW to 2.2 kW (2900 Btu/hr to 7500 Btu/hr)
-
Gasoline consumption of 0.10 L/hr to 0.27 L/hr (0.02 gph to 0.07 gph)
-
Air throughput of 0.85 m 3/min to 1.42 m 3/min (30 cfm to 70 cfm)
-
Power consumption at startup of 250 W (at 12 V)
-
Power consumption in operation of 8 W to 30 W
Operation of forced-air heater
Upon startup, the heater's control module runs a self-diagnostic check for safety. Then, the blower begins to increase speed as fuel is fed into the burner. Once the combustion process has stabilized, the glow plug is switched off. The heater continues to run until the thermostat senses the temperature has reached the setting on the control dial.
The heater will then switch to the next lowest setting. The heater will return to the higher setting as the temperature drops below the setting on the control dial. If the heater switches itself off, it will automatically restart when the temperature drops below the setting on the control dial.
If the heater's control module senses an incorrect air-intake volume, incorrect exhaust volume, incorrect fan speed, flame absence, flame loss, overheating, control dial failure, sensor failure, blower failure, glow plug failure, fuel pump failure, incorrect voltage, short-circuit or control module failure, the heater is immediately switched off and a fault code is recorded.
When the heater is switched off, the green light goes off and fuel is no longer fed to the burner. The glow plug remains switched on for 30 seconds to clear the heater of combustible residue. To prevent damage to the heater, the blower continues to run until the heater is cool.
Occupant Protective Structure with Canopy - 56B0MBM23203
Features of the sunshade:
- Made from 100 percent solution dyed, all-weather ultraviolet resistant polyester designed specifically to handle stress and resist tearing.
- Urethane coating is added to the fabric, adding stability and increased moisture and mildew resistance, with minimal shrinking or stretching.
- Heavy-duty powder coated black steel frame that bolts directly to the vehicle chassis.
- Sunshade dimensions: 864 mm by 1270 mm (34 in. by 50 in.)
- Not compatible with side storage box
The conveniently placed overhead visor provides sun protection.
It is compatible with the following vehicles:
-
All Gator model year 2011-current XUV 625i, XUV 825i, XUV 855D, and M-Gator™ A2 Utility Vehicles when equipped with a deluxe cab frame
-
All Gator HPX model year 2004-current, XUV 620i, and XUV 850D Utility Vehicles when equipped with a deluxe cab frame
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab
-
M-Gato A1 when equipped with a hard-door cab
The windscreen is constructed of tough, 4.76-mm (3/16-in.) thick tinted acrylic.
- Easily attaches to and detaches from the vehicle
- Height can be set to accommodate the operator preference
Dimensions
Width |
940 mm (37 in.) |
Height |
457 mm (18 in.) |
Depth |
127 mm (5 in.) |
Rear Receiver Hitch
The rear hitch acts as a mounting point for rear and tow-behind attachments:
- Gator™ TS has a 408-kg (900-lb) towing capacity.
- Gator TH 6x4 has a 635-kg (1400-lb) towing capacity.
- Gator TH 6x4 Diesel has a 726-kg (1600-lb) towing capacity.
- Gator TE has a 272-kg (600-lb) towing capacity.
- Gator 6X4 Diesel has a 636-kg (1400-lb) towing capacity.
This versatile hitch accepts a 1.25 in. (31.75 mm) drawbar.
No ball mount comes with the hitch.
Seat
This kit provides a slide-rail system that allows five 14-mm (9/16-in.) fore-aft positions.
Speed Control
Ideal for operators who are consistently driving over rough terrain. The damper assists the operator by modulating throttle input.
Compatible with Gator™ TS, TX, TH, and M-Gator™ A1 Utility Vehicles.
Sprayers
The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 45-gal. (170-L) capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.
NOTE: Sprayer shown above with optional 150-in. precision boom (LP22885).
High-performance features:
- 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 35-ft stream
- Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
- Glycerin-filled pressure gauge and TeeJet™ pressure regulation/recirculation valve
- Choice of booms (sold separately)
- On/off capabilities in the palm of your hand with the included sprayer remote control (LP22912)
- 12V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Pump |
|
Diaphragm material |
|
3.6 U.S. gpm (13.6 L/min) | |
Remote spray method |
|
Spray wand |
|
Tip material |
|
Adjustment | Fan-to-stream |
Hose length | 20-ft - 1/2-in. nylon reinforced rubber |
Gauge |
Glycerin filled |
Spray control |
|
Boom (sold separately) |
|
Option 1 | 150-in. spray width precision folding (5 tip) |
Option 2 | 120-in. spray width (3 tip) |
Option 3 | 24-ft boomless nozzle |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
|
Ordering information
Contact the local John Deere dealer for availability and pricing information.
High-performance 45-gal. (170-L) Gator bed sprayer
Order number: LP22908
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
This 25-gal. (95-L) Gator™ bed sprayer is a self-contained unit that conveniently sits in the bed of a steel bed Gator, ATV EXT or Gator CX.
It allows the operator to spray trees and shrubs with the spray wand or broadcast spray in a 10-ft swath with the boom.
The 25-gal. (95-L) yellow tank has four rubber feet bolted to the bottom to protect and stabilize the sprayer.
- Sprayer is held in place with the end gate support frame
- Large threaded cap makes fill-up easy
- Easy-to-read gallon marks are molded in
- A built-in sump is provided to completely clean out the spray material
The SHURflo® pump operates at 100 psi and pumps 2.1 gpm.
- Complete wire harness with switch plugs into the 12-V power outlet on the vehicle
The spray boom includes three floodjet nozzles with check valves to prevent dripping:
- Boom is supported by vehicle tailgate
- Spray boom is easily removed when not needed
The sprayer is equipped with a high-quality Spraying Systems Co.® spray wand:
- 14-in. wand with adjustable brass spray tip
- 19-ft hose included
The 25-gal. bed sprayer fits Gators and ATV EXT models, which have cargo boxes.
Specifications
Capacity | 25 U.S. gal. (95 L) |
Pump | |
Type | Electric motor and diaphragm |
Manufacturer | SHURflo |
Operating pressure | 100 psi |
Current draw | 7 amp |
Valve material | Viton® |
Diaphragm material | Santoprene™ |
Strainer | Stainless steel |
Boom spray width | 120 in. (305 cm) |
Spray tip(s) | Three TF-VP3 |
Spray flow rate | 2.1 U.S. gpm (7.9 L/min) |
Remote spray | 19-ft hose with adjustable polypropylene handgun with 14-in. wand |
Handgun material | Polypropylene with Viton components |
Adjustment | Fan-to-stream |
Shipping weight | 35 lb (16 kg) |
Warranty | Two year |
Ordering information
Contact the local John Deere dealer for availability and pricing information.
25-gal. (95-L) bed sprayer
Order number: LP20850
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
The sprayer is a self-contained unit that allows the user to spray trees and shrubs with the spray wand or broadcast spray in a 3.05-m (10-ft) swath with the spray boom.
Key features
-
Shurflo pump operates at 6.9 bar (100 psi) and pumps 8 L/min (2.1 gpm)
-
Spray boom is easily removed when not needed
- Fully adjustable brass spray wand tip achieves streams up to 9.15 m (30 ft)
-
Mounts without the use of tools
-
Brackets secure to Gator bed, no bungees required
-
A built-in sump is provided to completely clean out the spray material
-
Includes Gator accessory wiring harness, complete with quick-disconnects, for convenient electrical hookup
-
Check valves in boom tips prevent siphoning and dripping
- Equipped with a 5.8-m (19-ft) hand wand hose for convenience
-
Large threaded cap makes filling up easy
-
Easy-to-read gallon marks are molded in
Ordering information
Contact your local John Deere dealer for availability and pricing information.
170-L (45-gal.) Gator bed sprayer
Order number: LP20851
The standard Gator boom is compatible with all Gator sprayer models and is sold separately for the HP Gator sprayers. This fixed boom is conveniently sized at 43 in. (1.1 m) and does not extend wider than the Gator bed, but it is perfect for covering ground quickly and thoroughly with a 120-in. (3-m) spray swath.
The boom is ideal for basic spraying application. Three tips and check valves round out this offering (boom only, mounting brackets are provided with sprayers).
Boom Features:
- 43-in. (1.1-m) boom with three tips
- Check valves prevent siphoning and dripping
- Sold separately for:
- HP 45-gal. Gator Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
The 150-in. (3.81-m) precision boom is compatible with the HP sprayers. This folding boom is made to cover ground quickly and thoroughly with five precision spray tips, TeeJet™ nozzle bodies and commercial grade diaphragm check valves. The outer tips offer versatility with built-in shut offs to allow an adjustable 90-in. (2.3-m), 120-in. (3-m), or 150-in. (3.8-m) spray swath.
150-in. (3.8-m) precision boom features:
- Folding spring hinge
- Breakaway design
- Five TeeJet tips and nozzle bodies
- Adjustable spray swath (90 in., 120 in., 150 in.)
- 1/2-in. industrial-grade rubber hose
- Designed to work with
- HP 45-gal. Gator™ Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
TeeJet is a registered trademark of Spraying Systems Company.
The 24-ft (7.3-m) boomless spray nozzles are compatible with all HP sprayers. This boom is perfect for covering ground quickly and thoroughly with a 24-ft (7.3-m) spray swath. It is ideal for uneven terrain or where precision spray application is not necessary. TeeJet™ nozzle bodies and commercial grade diaphragm check valves round out this offering.
Boomless spray nozzles feature
- Three TeeJet tips and nozzle bodies
- Commercial-grade diaphragm check valves
- 1/2-in. (12.7-mm) industrial-grade rubber hose
- Designed to work with all HP sprayers :
- HP 45-gal. Gator™ Bed Sprayer
- HP 90-gal. Gator Bed Sprayer
- HP 45-gal. Gator Bed Sprayer – XUV 550
TeeJet is a registered trademark of Spraying Systems Company.
The HP 45-gal. (170-L) Tow-Behind Sprayer offers the ultimate in performance and versatility. With a 45-gal. capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and deicer. It is the perfect match for the customer who wants extreme performance.
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction and have a low profile, which maintains a low center of gravity for excellent stability. Cover ground quickly with flexible boom options; a 150 in. (3.8 m) precision folding, 120-in. (3-m) standard three tip, 24-ft (7.3-m) boomless, or no boom at all (boom sold separately).
HP features:
- 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 35 ft (10.7 m) stream
- Front-mount hose tender for easy hose access and storage
- Glycerin filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve
- Includes sprayer remote control
Additional features
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gal.)
Boom options (sold separately):
- 150-in. (3810-mm) precision spray boom
- 24-ft (288-in.) boomless spray nozzles
SHURflo is trademark of SHURflo, LLC. TeeJet is a registered trademark of Spraying Systems Company.
The 45-gal. (170-L) trail-type sprayer is equipped with a boom that sprays a wide, 120-in. width.
- Three nozzles for efficient broadcast spraying
- Boom folds up against the tank for storage
A 20-ft hose and handgun are provided.
- The 20-ft hose and handgun are helpful when spraying trees or other remote areas that cannot be reached with the sprayer itself
- A 14-in. wand on the handgun is standard equipment
The heavy-duty frame rolls smoothly on 15x6 tires that minimize ground compaction.
- Low center of gravity gives excellent stability
- Equipped with a 4-position hitch
- Rear of the frame is designed so the sprayer will stand upright during storage to reduce the amount of space required
Additional features include:
- Diaphragm-type pump designed for high-hour commercial applications; it can be run dry without damage
- The spray wand is constructed of non-corrosive polypropylene material with Viton® components for remote spray jobs
- Two-wire fused wiring harness complete with quick-disconnects for convenient electrical hookup
- Large cap to easily fill up the tank
- Control valve to channel the spray to the boom or handgun
- Rugged translucent yellow tank with molded fill-level indicators (in gallons)
Specifications
Capacity |
45 U.S. gal. (170 L) |
Pump |
|
Type |
Electric motor |
Manufacturer |
SHURflo® |
Operating pressure |
100 psi |
Current draw |
7 amp |
Valve material |
Viton® |
Diaphragm material |
Santoprene™ |
Strainer |
Stainless steel |
Boom spray width |
120 in. (305 cm) |
Spray tip(s) |
Three #11008VP |
Spray flow rate |
2.1 U.S. gpm (7.9 L/min) |
Remote spray method |
20-ft hose with adjustable polypropylene handgun with 14-in. wand |
Handgun material |
Polypropylene with Viton components |
Adjustment |
Fan-to-stream |
Tires |
15x6-6 pneumatic |
Wheel bearings |
Roller bearings |
Axle diameter |
1 in. (2.5 cm) |
Hitch |
Pin and spring clip, four height positions |
Weight - empty |
80 lb (36.3 kg) |
Weight - full |
456 lb (207 kg) |
Compatible with all Gator models except XUV 550, XUV 550 S4, and RSX Utility Vehicles.
Ordering information
Contact the local John Deere dealer for availability and pricing information.
45-gal. (170-L) tow-behind sprayer
Order number: LP20485
SHURflo is a U.S.-registered trademark of SHURflo, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
Spreaders
-
0.5-m 3 (17-cu ft) capacity
-
453.6-kg (1000-lb) load limit
-
Copolymer polypropylene is compression molded for optimum thickness in all areas and maximum durability
-
Heavy-duty, reinforced structural frame with a 25.4-mm (1-in.) diameter, one-piece axle to handle weight, speed, and bumps
-
Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
-
Double-sealed, high-speed roller bearings to handle a 48-km/h (30-mph) maximum speed
-
Heavy-duty polyethylene bed
-
Accepts dividers to separate cargo (template included)
-
-
All-terrain knobby tires
-
Provides good flotation and traction in mud, sand, and other wet or soft areas
-
Flexes over bumps and ruts for a smoother, more controlled ride
-
Minimizes ground compaction to save turf and prevent ruts in soft ground
-
-
Poly fenders to keep the operator, cart, and vehicle clean
-
Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1.875-in.) ball hitch, including Gator™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models
-
Quality and styling compatible with other John Deere equipment
Ordering information
Contact your local John Deere dealer for availability and pricing information.
17AT Cart
Order number: LPPCT17ATJD
The Gator™ electric fertilizer spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator Utility Vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator salt spreader. Convenience is at the operator’s fingertips with an electronic variable-speed spinner and electronic gate control from the Gator seat. Adjustable flighting allows spread pattern control to make sure the material is applied where it is needed.
Features:
- Powder-coated steel frame
- Electronic variable-speed spinner
- Electrically actuated control of the flow gate
- 10-in. (25.4-cm) diameter spinner is stainless steel with adjustable flighting to control spreader pattern
- 8:1 ratio with bronze gear, grease filled
- Motor is 1/3 hp, 12-V DC, semi sealed
The mounting hitch and control box are sold separately, available through Order Zone.
Ideal for:
- Granular fertilizer
- Seed
- Granular pesticide
- Granular herbicide
Capacity:
- Volume: 3.0 cu ft (0.1 cu m)
- Weight: 240 lb (108.9 kg)
- Spreading width: up to 20 ft (6.1 m)
Includes:
- Side deflector
Compatibility:
- Compatible with all model year 2011 to current heavy-duty Gator XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.
- Compatible with all XUV560 and XUV560 S4 Utility Vehicles.
- Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch-mounting brackets, sold separately through Order Zone.
Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.
The Gator™ electric salt spreader is the ideal solution for medium to large size jobs. This unit is engineered to fit heavy-duty XUV Gator vehicles and designed with a versatile hitch mechanism (sold separately) that allows quick and secure attach/detach capability for easy bed access or switching to a Gator fertilizer spreader. The Gator salt spreader features an electric-driven auger for consistent salt presentation to the spinner. It draws power from the Gator vehicle, so no external power source is needed. It is powered by a variable-speed controller (sold with hitch) for precise spread pattern control.
Features:
- Powder-coated steel frame
- Spinner motor controlled using the vehicle’s 12-V system
- 10-in. (25.4-cm) diameter spinner is nylon/glass reinforced resin for ultimate corrosion resistance
- 5:1 ratio with bronze gear, grease filled
- Motor is 1/3 hp, 12-V DC, semi sealed
The mounting hitch and control box are sold separately. Available through Order Zone.
Ideal for:
- Salt and large granular materials
Capacity:
- Volume: 3.0 cu ft (0.1 cu m)
- Weight: 240 lb (108.9 kg)
- Spreading width: Up to 20 ft (6.1 m)
Compatibility:
- Compatible with all model year 2011 to current heavy-duty XUV 625i, 825i, 825i S4, 855D, and 855D S4 Utility Vehicles.
- Compatible with all Gator XUV560 and XUV560 S4 Utility Vehicles.
Gator XUV 620i and 850D Utility Vehicles and XUV 625i, 825i, and 855D Utility Vehicles pre model year 2011 must purchase the Gator hitch mounting brackets, sold separately through Order Zone.
Ordering information
Available through Order Zone. Contact the local John Deere dealer for availability and pricing information.
The spreader hitch and control kits were designed to mount salt and fertilizer spreaders which are engineered to fit Gator™ Utility Vehicles.
Features:
- Hitch frames are spring loaded for quick attach/detach spreader capabilities
- Hitch can be easily lowered by the use of spring-loaded pins, promoting easy bed or engine access
- Electronic control box is weather resistant and enables variable-speed application from the comfort of the operator’s seat
Spreader hitch and controls kit includes:
- Spreader hitch frame
- Electronic control box and wiring
The 21 Steel Utility Cart is the ideal companion for the Gator™ Utility Vehicle:
-
454-kg (1000-lb) load limit
-
Dump angle of 35/40 degrees
-
Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
-
Large pneumatic tires
-
Provide good flotation in mud, sand, and other wet or soft areas
-
Flex over bumps and ruts for a smoother, more controlled ride
-
Minimize ground compaction to save turf and prevent ruts in soft ground
-
-
Unique bracket less tailgate means no side channels to obstruct materials when emptying
-
When shoveling, recessed flat bolt heads stay out of the way
-
Heavy-duty, reinforced one-piece solid undercarriage
-
Contoured corner bed design
-
Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1-7/8-in.) ball hitch, including Gater™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models
Ordering information
Contact the local John Deere dealer for availability and pricing information.
21 Steel Utility Cart
Order number: LPUT21JD
Suspension
The heavy-duty front suspension kit improves ride and handling while hauling heavier loads.
- Heavy-duty front shock absorbers with higher-strength springs replace the standard shocks
- Spring support is adjustable to five positions
- Heavy-duty suspension kit is recommended if the Gator™ utility vehicle is equipped with a cab or front blade attachment
- The front blade attachment is not compatible with TH 6X4 Diesel Utility Vehicles.
NOTE: The M141507 wrench to adjust the weight setting is available through Service Parts.
Tire Chains
Tire chains increase traction dramatically under ice and snow conditions.
- NOTE: Not intended for use on all four rear tires on the TH 6x4 and TH 6x4 Diesel.
Tire chains increase traction dramatically under ice and snow conditions.
- NOTE: Not intended for use on all four rear tires on the TH 6x4.
Winch
This strong, 12-V winch has an impressive pulling capacity of 1134 kg (2500 lb). It is equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities. The kit also includes a wiring harness that allows for a quick connection to the winch at the front of the Gator™ utility vehicle. The rear wiring harness with quick connection can be purchased through Parts.
The winch has a 3.05-m (10-ft) lead and a water-resistant remote for safe-distance operation. It also comes with a four-way roller fairlead to minimize rope abrasion and pulling resistance.
The kit comes with the winch, receiver mounting plate, and wiring for front mount. This winch is compatible with 31.75-mm (1.25-in.) front and rear receiver hitches.
NOTE: Requires front receiver hitch for front mount. Requires rear receiver hitch for rear mount. Requires AM137110 rear multi-mount harness for rear mount. VGA10459 365.8-cm (144-in.) battery cable is required for TH 6X4 Diesel and M-Gator™ A1 Utility Vehicles.
WARN is a trademark of WARN Industries, Inc.
Winch Mounting Kit
Double the pulling power, change the pulling direction, and keep the winch in proper working order.
The accessories kit is essential gear for operators getting the most out of their winch:
-
Effectively anchors to trees/boulders
-
Change the pulling direction
-
Double the pulling capacity
The accessories kit includes:
-
Flexible tree strap
-
Snatch block
-
Shackle
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
Windshield
Especially useful for working around properties and job sites, the windshield washer kit includes the following:
-
Mounting bracket
-
Hardware
-
Spray nozzle
-
Large reservoir with electric pump
-
Harness and hose
The reservoir assembly bolts to the bottom-right rear of the cab structure. A convenient overhead-mounted on/off rocker switch controls the windshield wiper and washer fluid. As with all Gator™ electrical kits, the washer kit ties into the vehicle's wiring harness for quick installation.
Compatible with the following vehicles:
-
Traditional Series—TS, TX, TX Turf, and TH 6x4 when equipped with a soft-door or hard-door cab and electrical kit
-
TH 6x4 Diesel requires cargo box power lift
-
-
M-Gator A1 when equipped with a hard-door cab and electrical kit
Kit includes:
-
Wiper
-
Motor assembly
-
Mounting hardware
A convenient overhead mounted on/off rocker switch controls the windshield wiper and washer fluid (if equipped). As with all Gator™ electrical kits, the wiper kit ties into the vehicle's wiring harness for quick installation.
Compatible with the following vehicles:
-
Traditional Series—TS, TX, TX Turf, and TH 6x4—when equipped with a soft-door or hard-door cab and electrical kit
-
M-Gator™ A1 when equipped with a hard-door cab and electrical kit