XUV865M UTILITY VEHICLE
Crossover Utility Vehicle
- Powerful diesel engine with up to 4,000-lb (1,814 kg) towing capacity
- Power steering
- Cargo box with spray-in liner, brake and taillights
- Maxxis® Bighorn® 2.0 Extreme Terrain Radial Tires with steel wheels
PLUS ADDITIONAL CHARGES
Apply For FinancingBuy OnlineMaintenance Plans
View Product Brochure
60 Day Promise
Features
Conquer tough terrain with confidence
You will feel confident and comfortable, even on tough terrain, with a full-size Gator™ Utility Vehicle. You will feel stable with a low center of gravity and a wide stance. Engine braking and four-wheel hydraulic disc brakes keep you in control on steep descents, even when fully loaded. The power steering on M- and R-Trim vehicles, is smooth and responsive.
Standard four-wheel drive with front and rear differential locks
With standard four-wheel drive and differential lock, both instantly available with the flip of a switch, you can get where you are going.
Dual A-arm front and rear independent suspension
The independent suspension provides a smooth ride as 203 mm (8 in.) of front suspension travel and 229 mm (9 in.) of rear suspension travel cushions bumps and glides over ruts. And clearing rocks and roots is no problem with 284 mm (11.2 inches) of ground clearance.
Tires for any terrain
Full-Size Gator Utility Vehicles are available with three tire options:
- Terra Hawk all-terrain tires
- Tread pattern and wide footprint provide excellent traction with minimal impact on terrain
- Maxxis Bighorn 2.0 extreme terrain radial tires
- Radial construction provides shock absorption, allowing for a smoother ride
- Non-directional tread pattern provides predictable cornering and claws up roots and rocks
- Predator Heavy-Duty all-terrain radial tire
- Radial construction provides shock absorption, allowing for a smoother ride
- Flat profile increases footprint area, reducing ground pressure
- 8-ply rating delivers up to three times the life of Bighorn tires
Maxxis® Bighorn® is registered trademark of Cheng Shin Rubber Ind. Co., Ltd.
Built for the long haul
Full-size Gator™ XUVs are built to work hard and go the extra mile.
Heavy-duty frame
The hefty frame is designed to stand-up to all the bumps and bends of the trail, and the standard front skid plate protects key components from damage.
Constant velocity boot protection
Constant velocity joints are enclosed to keep water and dirt out. A protector shield protects the boot from trail debris.
Automotive-grade panels and optional protection packages
The hood and side panels are made of automotive-grade materials that resist scratches and dents, and the cargo box is made of tough composite material that resists dents and rust. Optional protection packages look tough and provide even more protection.
TrueTimber® is a trademark of True Timber Outdoors Holding Company, LLC.
Automotive-like controls
When you sit behind the wheel of a full-size Gator™ Utility Vehicle, you will be reminded of your favorite pick-up truck. There are controls at your fingertips, an easy-to-read instrument panel, and outlets to recharge your phone.
Shift from park and into gear with a throw of a single lever. Power steering on M- and R- trim vehicles is smooth and responsive.
When the going gets tough, you can instantly engage four-wheel drive and rear differential lock with switches. Even at night, the backlit switches are easy to see. If a front wheel starts to slip, the front differential automatically locks to pull you through.
Room for you, plus two
When you hop into the seat of a full-size Gator™ Utility Vehicle, you will notice there’s seating for you, plus two.
Three-passenger seating with room to spare
The adjustable operator’s seat and tilt steering lets drivers of all sizes get comfortable, and the passenger grab handles help everyone feel secure. The low step height and generous opening between seat base and fender is even designed to accommodate bulky work boots.
Roof, windshield, rear panel, door, and heater options
Roof, windshield, rear panel, and half doors attachments keep you dry, shaded, and out of the dust. Cab doors with roll down windows and heater attachments keep you warm all winter.
Haul more in fewer trips
The full-size Gator™ XUV can haul 454 kg (1000 lb), so load it up with confidence. You can also make fewer trips with 1814 kg (4000 lb) of towing capacity and a standard 51-mm (2-in.) receiver hitch.
Built-tough cargo box
The cargo box resists dents, scratches, and rust because it is made from a tough composite material. You will have no problem securing loads with integrated tie bars and 14 tie-down points. You can also convert the cargo box to a flatbed when you need to haul big and bulky loads.
The cargo box measures 1143 mm (45 in.) long, 1320 mm (52 in.) wide, and 305 mm (12 in.) deep.
One-handed tailgate
Since your hands are always full, the tailgate can be opened and closed with one hand. You can also lower the tailgate to carry longer items or remove it for easy cleanout.
Power lift
To save your back, the optional cargo box power lift empties heavy loads with the push of a button.
Durable, fuel-efficient diesel-powered drivetrain
The XUV865 and XUV825M S4 Gator™ Utility Vehicles are powered by a fuel-efficient and durable diesel engine. The enclosed drivetrain automatically adjusts for fast acceleration, along with powerful hauling and hill-climbing capabilities. With plenty of torque to get the job done, this engine will provide reliable performance for years to come.
Store more gear
One-row full-size Gator XUVs come packed with places to store tools, gear, and beverages.
Cup holders
The dash has four cup holders, and cab vehicles have a cup holder in each door.
Dash and under-seat storage
The vehicles also feature an enclosed glove box, center tray, dash storage pocket and under-seat storage. Depending on the configuration, vehicles may have up to three additional dash bins and under-hood storage.
Color options and styling
You will get noticed with the distinctive styling of full-size Gator™ XUVs. Available in four colors, with various protection packages, and more than 100 attachments, you can create a custom look that will turn heads.
TrueTimber is a trademark of True Timber Outdoors Holding Company, LLC.
Go further between fill ups
Full-size Gator™ XUVs have a large 42.8-L (11.3-gal.) fuel tank so you go further between fill ups. A 76-mm (3-in.) diameter fill opening reduce spills.
Specifications
Compare the specifications of up to 4 models
Key Specs | xuv865m-utility-vehicle Current Model |
---|---|
Engine power | 17.0* kW 22.8 hp |
Cargo box dimensions | 1143 x 304.8 x 1320 mm 45 x 12 x 52 in. |
Cargo box capacity (weight) | 454 kg 1000 lb |
Towing capacity | 907 kg 2000 lb |
Front suspension | Fully independent dual A-Arm with adjustable coils; 7.9 inches (200.7 mm) of travel |
Rear suspension | Fully independent dual A-Arm with adjustable coils and sway bar; 9.1 inches (231.14 mm) of travel |
Final drive | Two speed, oil bath |
Four wheel drive | On-demand true four-wheel drive system |
Fuel capacity | 42.4 L 11.2 U.S. gal. |
Engine | |
Type | 4-cycle diesel |
Displacement | 854 cc |
Power | 17.0* kW 22.8 hp |
Cooling system | Liquid |
Drivetrain | |
Transmission | Continuously Variable Transmission (CVT) with clutch enclosure |
Final drive | Two speed, oil bath |
Four wheel drive | On-demand true four-wheel drive system |
Traction assist | Positive locking, mechanically actuated (hand-operated) |
Descent control | Yes |
Suspension | |
Front | Fully independent dual A-Arm with adjustable coils; 7.9 inches (200.7 mm) of travel |
Rear | Fully independent dual A-Arm with adjustable coils and sway bar; 9.1 inches (231.14 mm) of travel |
Brakes | |
Type | Front/rear hydraulic disc with twin piston front calipers |
Park brake | Driveline, internal wet multi-disc, foot operated (hand release) |
Tires / Wheels | |
Front | 25x9-12 Terrahawk AT, 27x9-R14 Maxxis Big Horn Radials (on Alloy Rims), or Maxxis Big Horn Radials (on Steel Rims) |
Rear | 25x11-12 Terrahawk AT, 27x11-R14 Maxxis Big Horn Radials (on Alloy Rims), or Maxxis Big Horn Radials (on Steel Rims) |
Dimensions / Capacities | |
Wheelbase | 2146 mm 84.5 in. |
Weight | 839 kg 1845 lb With Cab and HVAC: 1001 kg With Cab and HVAC: 2202 lb *Additional Attachments and Accessories will add weight |
Length | 3228 mm 127 in. |
Width | 1618 mm 63.7 in. With doors: 1763 mm With doors: 69.4 in. |
Height | 1981 mm 78 in. With roof: 1987 mm With roof: 78.25 in. |
Tread centers | Front: 1341 mm Front: 52.8 in. Rear: 1259 mm Rear: 49.6 in. |
Ground clearance | 284 mm 11.2 in. |
Fuel capacity | 42.4 L 11.2 U.S. gal. |
Cargo box dimensions | 1143 x 304.8 x 1320 mm 45 x 12 x 52 in. |
Cargo box capacity (weight) | 454 kg 1000 lb |
Payload capacity | 680 kg 1500 lb |
Towing capacity | 907 kg 2000 lb |
Hitch | Standard 2-in. receiver |
Features | |
Color | Green/Yellow, Camouflage, Olive and Black |
Power steering | No on E Trim; Yes on M and R Trim |
Battery / Alternator / Power port | 480 CCA 85 amp @ 7000 rpm, 1020 watts |
Instrumentation | Digital Display (system diagnostic light, speed, rpm, 4WD indicator, fuel level, coolant temperature, hour meter, miles, park brake light, glow plug indicator) |
Storage | Four cup holders (two additional for cab units), in dash, under seat (56.69 L), glove box (3.85 L), optional under hood - except for HVAC units or units with the dealer installed heater kit |
Seating | Bench (Available Bucket Seats on E and M Trim) |
Accessories and Attachments
1.82m (72 in.) Hydraulic Straight Blade
1.82m (72 in.) Hydraulic V-Blade
Ag Management Solutions
The AMS integration kit allows the operator to mount a StarFire Receiver and GreenStar display (both receiver and display sold separately) to the Gator™ Utility Vehicle.
Key features of the AMS integration kit:
- Compatible with StarFire iTC, StarFire 3000, and StarFire 6000 Receivers
- Compatible with GreenStar 2 1800, GreenStar 2 2600, GreenStar 3 2630, and John Deere 4640 Universal Display
- Ability to mount receiver to the poly roof or on the occupant protective structure (OPS) alone
NOTE: Additional components are required to support the John Deere 4640 Universal Display include:
- AL212683 (1)
- 21M7577 (2)
Common applications:
- Boundary mapping
- Flagging field obstacles
- Soil sampling
Compatibility:
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements:
XUV835/865 | Attachment harness required (see below) |
E | 1, 3, 5, 6 |
M (open station) | 3, 5, 6 |
M (cab, factory installed) | 5, 6 |
R | 6 |
1 | E-spec attachment harness |
2 | Front attachment harness |
3 | Roof attachments harness |
4 | Front cab harness |
5 | Rear cab harness |
6 | Dash port harness |
Code | Attachment | Description |
BUC10634 | AMS integration kit |
Backup Alarm
Cab
Key features
- Tightly seals against the occupant protective structure (OPS) with the aid of a double-bulb seal
- Roll-down windows
- Easy-to-operate door release lever
- Gas strut on the door to help it open
- Color panels (green and yellow, olive, or camo) to enhance styling of the vehicle (sold separately)
- Lockable using the ignition key
- Integrated drink/storage pocket
- Tempered glass
- Heat-absorbing tinted glass absorbs solar radiation coming in through the window, reducing solar heat in the operator station
Compatibility
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
The camo cab panel enhances vehicle styling with an accent panel for the cab door (sold separately).
Key features
- Large, fixed window for greater visibility
- Tempered glass
- Heat-absorbing tinted glass absorbs solar radiation coming in through the window, reducing solar heat in the operator station
- Helps keep dust out of the operator station when installed with a full windshield
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
The green and yellow cab color panel enhances vehicle styling with an accent panel for the cab door (sold separately).
Key features
- Enhances the vehicle styling with an accent color panel for the cab door (sold separately)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Made from premium, heavy-duty, 600 denier-solution dyed, water-resistant, UV-stabilized polyester for mold and tear resistance
- Durable, polyvinyl chloride (PVC) rear window resists yellowing or cracking. Window opens easily with a zipper and can be secured in place with straps.
- Helps keep dust out of the operator station when installed with a full windshield
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Compatible with the following cab components:
- Cab doors – both poly and canvas
- Poly roof
- Full poly windshield
- Glass windshield
Key features
- Made from premium, heavy-duty, 600 denier-solution dyed, water-resistant, UV-stabilized polyester for mold and tear resistance
- Durable, polyvinyl chloride (PVC) windows resist yellowing or cracking. Windows opens easily with a zipper and can be secured in place with straps.
- Lower PVC window for enhanced visibility
Compatibility information
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
- Compatible with the following cab components:
- Poly roof
- Canvas roof and rear panel
- Canvas rear panel
- Cab rear panel
- Full poly windshield
- Glass windshield
Half doors are a choice on the XUV835 and XUV865 Utility Vehicles:
- One-handed operation
- Interior latch for opening
- Armrest for comfort
- Color-matched exterior decal based on the color of the unit
- Available only on open station units
The OSR doors kit is a replacement kit for the factory-installed OSR doors or can be installed on vehicles that had the OSR nets installed from the factory. These OSR half doors can only be installed on model year 2018 and newer Gator™ XUV835 and XUV865 Utility Vehicles.Model year 2019 and older vehicles also require:
- UC20514 left-hand A-post cover
- UC20515 right-hand A-post cover
The OSR color accents are sold separately and can be installed on the OSR doors.
Key features
- Enhances the vehicle styling with an accent color panel for the cab door (sold separately)
- Must order right and left side yellow decal labels to complete panel styling
- Left label: UC13523
- Right label: UC13524
- Reference CCMS solution 111866 for details on installation and alignment of color label.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Enhances the vehicle styling with an accent color panel for the cab door (sold separately)
- Must order right and left side yellow decal labels to complete panel styling
- Left label: UC13523
- Right label: UC13524
- Reference CCMS solution 111866 for details on installation and alignment of color label.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Cargo Box
The 5-gal. (18.9-L) pail holder is ideal for operators who want to maximize the work capability of their Gator™ Utility Vehicle. The 5-gal. (18.9-L) pail holder keeps pails in place within the cargo box, ensuring that they stay safe and secure. Featuring the quick-clamp mounting system, it mounts easily to the cargo rails of the cargo box with just one clamp.
The cargo bed extender conveniently extends the rear of the cargo bed, and also acts as a cargo box divider when it is flipped inside of the cargo box. The cargo bed extender easily flips in or out with the use of quick-pull pins.
The deluxe cargo box bed mat not only protects the steel floor from scratches and dents, it also provides additional cushioning and slip resistance to items being hauled in the cargo box.
The Gator™ XUV Series can be equipped with an optional divider for the deluxe cargo box. The dividers can be positioned at the front or rear of the cargo box bed. To change positions of the dividers, simply release the speedrail locks by hand and slide into new position, then close the locks to secure the dividers.
The cargo box side extension kit expands the versatility of the Gator™ Utility Vehicles and is ideal for those who are enhancing their property and landscape. The extensions allow operators to haul twice the volume (not to exceed cargo box weight capacity) of light material such as grass clippings and mulch.
Product features include:
- Four-sided structure that increases cargo box side height to 533 mm (21 in.) and volume to 0.74 m3 (26 cu ft)
- Mounted on the sides and front with hardware, while the tailgate can be attached or removed without tools
- Tailgate pivots at the top (similar to a dump truck) for ease of dumping loose material
- Laser-cut, heavy-gauge, powdered-coated steel provides excellent durability
- Compatible with all model year 2011 to current Gator XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, and M-Gator A2 Utility Vehicles
- Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
- Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles.
- Compatible with Gator cabs and bedliner
NOTE: The cargo box side extensions are not intended to increase the rated cargo box carrying capacity per the vehicle specification.
Overview
This sportsman case from Black Mountain All-Terrain is a great storage upgrade to the bed of all Gator XUV Full-Size Utility Vehicles including XUV835, XUV865, XUV625, XUV825, XUV825 S4, XUV855, and XUV855 S4 models, as well as the Work Series Utility Vehicles including HPX615E, HPX815E, TE, TH, and TX models.
Benefits
- Functions as a toolbox and/or a hunting equipment storage case
- Secures and removes quickly from bed of a Gator utility vehicle or personal vehicle
- Keeps valuable items protected inside durable, protective plastic insert with foam padding and heavy fabric exterior
- Transports easily with shoulder strap and carry handles
- Customizable with two color choices:
- Realtree EDGE® camo with black base
- Classic black
Additional details
- Holds two hunting accessories/instruments up to 127-cm (50-in.) in length
- Case easily attaches and detaches to cargo box with four quick-connect buckles
- Four D-rings with removable straps for easy removal from the XUV or pickup truck
- Convenient hand carry straps on top and grab handles on each end
- Made from water-resistant, mildew-resistant, and abrasion-resistant material
- Base covered with durable ballistic nylon/poly fabric that is resistant to tearing
- Oversized, corrosion-resistant zippers for durability and ease of use
- Lockable zippers allow contents to remain secure
- Top-loading design with wide opening lid allows quick access
- Acrylonitrile butadiene styrene (ABS) plastic interior frame protects valuable contents
The case is 127-cm (50-in.) long, 22.9-cm (9-in.) wide, 38.1-cm (15-in.) high, and weighs 7.7 kg (17 lb).
Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Overview
This sportsman case from Black Mountain All-Terrain is a great storage upgrade to the bed of all Gator XUV Full-Size Utility Vehicles including XUV835, XUV865, XUV625, XUV825, XUV825 S4, XUV855, and XUV855 S4 models, as well as the Work Series Utility Vehicles including HPX615E, HPX815E, TE, TH, and TX models.
Benefits
- Functions as a toolbox and/or a hunting equipment storage case
- Secures and removes quickly from bed of a Gator utility vehicle or personal vehicle
- Keeps valuable items protected inside durable, protective plastic insert with foam padding and heavy fabric exterior
- Transports easily with shoulder strap and carry handles
- Customizable with two color choices:
- Realtree EDGE® camo with black base
- Classic black
Additional details
- Holds two hunting accessories/instruments up to 127-cm (50-in.) in length
- Case easily attaches and detaches to cargo box with four quick-connect buckles
- Four D-rings with removable straps for easy removal from the XUV or pickup truck
- Convenient hand carry straps on top and grab handles on each end
- Made from water-resistant, mildew-resistant, and abrasion-resistant material
- Base covered with durable ballistic nylon/poly fabric that is resistant to tearing
- Oversized, corrosion-resistant zippers for durability and ease of use
- Lockable zippers allow contents to remain secure
- Top-loading design with wide opening lid allows quick access
- Acrylonitrile butadiene styrene (ABS) plastic interior frame protects valuable contents
The case is 127-cm (50-in.) long, 22.9-cm (9-in.) wide, 38.1-cm (15-in.) high, and weighs 7.7 kg (17 lb).
Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
A – Fender flare
B – Fender
The rear fender flare kit minimizes debris from reaching the operator station.
Product features include:
- Two pliable fender flares (one for each side)
- Hardware for mounting on the sides
- Compatible with all model year 2011 to current Gator™ XUV825, XUV825 S4, XUV855, XUV855 S4, XUV835, and XUV865 Utility Vehicles
- Compatible with model year 2010 to current Gator TX 4X2, TH 6X4 Gas, TH 6X4 Diesel, TE, and TX Turf Utility Vehicles
- Compatible with model year 2018 and newer gas and diesel HPX Utility Vehicles
The side tool rack enables the user to maximize the use of their cargo box by carrying long-handled tools, such as trimmers, shovels, and rakes, on the outside of the box. The holders are adjustable, allowing the users to carry a wide array of items in the racks.
Easily mount a spare tire to the side of the cargo box with this convenient kit.
Recommended to carry spare front tire, as the front tire can be mounted on either the front or rear hubs.
Cargo Box Lift
Overview
The Gator™ utility vehicles can be equipped with an optional power lift for the cargo box. This is one of the most important accessories for increasing work efficiency. It is an excellent complement to these highly capable utility vehicles.
Benefits
- Capable of lifting a maximum vehicle cargo box load of 454 kg (1000 lb)
- Lifts box to 49 degrees from horizontal for ease of service and cargo box load removal
- Quick horizontal-to-49-degree time
- Can be installed in minutes using the vehicle's prewired connectors and mounting points
- Compact design fits nicely around the transmission and linkages, providing full protection
- Fully sealed and weatherproof design does not require maintenance and is built for maximum durability
- Overload protection protects against misuse
Cold Start Packages
Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.
Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts. It is rated for 400 W output power.
Cover
Overview
Bench seat covers are available for full-size Gator™ utility vehicles.
Benefits
- Protection for the bench seat from wear and stains
- Constructed with military-grade CORDURA® fabrics
- Quick and easy installation
- MOLLE attachment locations (MOLLE attachments available through Order Zone)
- Easy access to seatbelts
- Available in three color options: black, Realtree EDGE® camo, or coyote brown
Additional details
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone.
CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Overview
Bench seat covers are available for full-size Gator™ utility vehicles.
Benefits
- Protection for the bench seat from wear and stains
- Constructed with military-grade CORDURA® fabrics
- Quick and easy installation
- MOLLE attachment locations (MOLLE attachments available through Order Zone)
- Easy access to seatbelts
- Available in three color options: black, Realtree EDGE® camo, or coyote brown
Additional details
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone.
CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Each kit (available through Order Zone) contains one bench base cover, one backrest cover, and installation instructions.
NOTE: One carton (two kits) outfits driver and passenger seats.
Special features:
- Exceptional abrasion, tear, and puncture resistance
- Constructed with military-grade CORDURA® fabrics
- Protects original equipment manufacturer (OEM) seats from mud, snow, and debris
- Quick and easy installation
- Available in black or Realtree Hardwoods HD® pattern
- Military-grade zippers
- Limited 1-year warranty
- Made in the USA
Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd. CORDURA is a trademark of INVISTA North America, LLC.
Key features
- All-season protection against sun damage, rain, dust, and tree sap
- Reinforced corners for added durability
- Fabric coated for maximum water resistance and repellency
- Elastic shock cord in bottom hem for a quick, custom fit
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone
Drawbar
Description:
- Kit includes a 51-mm (2-in.) drawbar, 10-mm (0.39-in.) pin, and hair cotter pin
-
Steel construction has a 25-mm (1-in.) ball hole size
-
Can be mounted in the standard rear receiver hitch or the optional front receiver hitch
- Compatible with all Gator model year 2011-current XUV560, XUV560 S4, XUV590, XUV590 S4, XUV 625i, XUV 825, XUV 855, RSX860, and M-Gator™ A2 Utility Vehicles
- Compatible with HPX 615 and 815 Utility Vehicles
-
Compatible with XUV 620i and XUV 850D Utility Vehicles
NOTE: Compatible with all Gator HPX Utility Vehicles if equipped with an optional 51-mm (2-in.) front receiver hitch. An optional 51-mm (2-in.) rear receiver is not available for the Gator HPX models. A 32-mm (1-1/4-in.) rear receiver hitch and drawbar are available for the Gator HPX models.
Floor Mat
Key features
- Kit includes left and right floor mats
- Made from 8-mm (5/16-in.) thick textured rubber
- Tool-less install and easy removal for cleaning
- Helps further dampen operator station noise
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Front Rack
Key features
- 124.5-cm (49-in.) long x 36-cm (14.25-in.) wide x 11-cm (4.25-in.) deep
- Welded steel tubing
- Design allows for convenient tie-down points to secure load
- 45-kg (100-lb) capacity
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Requires brush guard to be installed
Guards
Key features
- Provides a modern and aggressive appearance
- Heavy-duty, 44.45-mm (1.75-in.) diameter, steel tube construction
- Welded steel brush guard provides protection for the front grille, lights, and hood
- Easy-to-use quick pull pins allow the brush guard to be hinged forward to gain access under the hood
- Includes mounts for auxiliary light-emitting diode (LED) lights (sold separately)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Enhances the aggressive appearance of the vehicle
- Easily attaches to the brush guard (required – sold separately)
- Provides additional protection to the side hood and fender area without adding additional overall width to the vehicle
- Still allows full entry under the hood when brush guard is hinged forward
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Connects with rear bumper (required – sold separately)
- Provides enhanced styling in addition to heavy-duty protection to the side of the cargo box
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Kit contains both front and rear CV guards
- Additional added protection for the A-arms and CV joints
- High-strength, formed steel guards handle impacts while maintaining a low, unsprung mass to provide exceptional ride quality
- Easily bolts to the A-arms
- Drainage holes on the bottom of the guards prevent buildup of dirt, grass, and other loose materials
Compatibility
- Model year 2020 and newer XUV835 and XUV865 Utility Vehicles
Key features
- Easily attaches to the brush guard (required – sold separately)
- Provides protection to the front fender area
- NOTE: With fender guards installed, the overall width of the vehicle increases to 1.75 m (69 in.).
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
The rear bumper offers stylish, heavy-duty rear protection to the vehicle.
Compatible with:
- Model year 2011 and later Gator™ XUV 625i, XUV 825, and XUV 855 Utility Vehicles
- Model year 2010 and later Gator TX, TX Turf, TH 6X4 Gas, TH 6X4 Diesel, and TE Utility Vehicles
- Model year 2018 and later Gator XUV835 and XUV865 Utility Vehicles
CV guards add additional protection for the A-arms, brake lines, and CV half shafts:
- Formed steel guards handle impacts while maintaining a low unsprung mass
- Easily bolt to the A-arms with six bolts
- Drainage holes provided to prevent buildup of dirt, grass, and other loose materials
- Compatible with all model year 2011 to current Gator™ XUV625i, XUV825, XUV855, and M-Gator A2 Utility Vehicles
- Compatible with model year 2013 to current Gator XUV825 S4 and XUV855 S4 Utility Vehicles
- Compatible with model year 2018 to current Gator XUV835 and XUV865 Utility Vehicles
Key features
- Provides additional protection to the operator and passengers
- NOTE: Never carry loads in the cargo box over the load guard.
- Perforated, black metal screen easily attaches to the occupant protective structure (OPS)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Not compatible with cab rear panel
Key features
- Provides protection to the cab rear-panel glass
- NOTE: Never carry loads in the cargo box over the load guard.
- Perforated, black metal screen easily attaches to the cab rear panel (required – sold separately)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
The brake and taillight protector offers increased protection to the taillight assembly from incidental contact.
Harnesses
CAN Bridge Control Kit - 576GMBUC10811
The front attachment harness includes connections for the following kits:
- Light-emitting diode (LED) headlights
- Turn signals
- Horn
- Brush-guard-mounted auxiliary lights
Key features
- The front attachment harness (dash port) includes connections for the following kits:
- Rear sprayer
- Rear spreader
- Blades
- GreenStar™ Display as part of the Ag Management Solutions (AMS) integration kit
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- The front cab attachment harness includes connections for the following kits:
- Front auxiliary lights
- Windshield wiper
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features:
- The hydraulic blade and winch harness includes connections for the following kits:
- Hydraulic blade
- Winch
Compatibility:
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- The rear cab attachment harness includes connections for the following kits:
- Rear auxiliary lights
- Beacon light
- Ag Management Solutions (AMS) receiver harness
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- The roof attachment harness includes connections for the following kits:
- Front cab attachment harness
- Rear cab attachment harness
- Upper speakers for premium stereo kit
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Heater
Key features
- Four 5.1-cm (2-in.) adjustable vents, located for defrost and floor heat
- High and low fan speeds
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Horn
Key features
- Frequency: 410 Hz
- Sound pressure level: 100+ dB(A)
- Water-sealed type
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 | Attachment harness required (see below) |
E | 1, 2 |
M (open station) | 2 |
M (cab, factory installed) | 2 |
R | --- |
1 | E-spec attachment harness |
2 | Front attachment harness |
3 | Roof attachments harness |
4 | Front cab harness |
5 | Rear cab harness |
6 | Dash port harness |
Lighting
Key features
- 76-mm (3-in.) round, light-emitting diode (LED) strobe light provides excellent visibility for vehicle bystanders
- Especially useful for working around properties and job sites
- Acrylic amber lens resists scratching and scuffing
- Impact-resistant nylon housing
- Society of Automotive Engineers (SAE) J845 (Class 3)-compliant
- UL® recognized
- Flash rate: 60 +/- 10 fpm
- Stands 21.3-cm (8.4-in.) tall from roof/occupant protective structure (OPS)
- Folds down out the way when not in use
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 | Attachment harness required (see below) |
E | 1, 3, 5 |
M (open station) | 3, 5 |
M (cab, factory installed) | 5 |
R | --- |
1 | E-spec attachment harness |
2 | Front attachment harness |
3 | Roof attachments harness |
4 | Front cab harness |
5 | Rear cab harness |
6 | Dash port harness |
UL is a trademark of UL LLC.
Key features
- Upgrade from halogen headlights
- High/low beam
- Raw lumen output (per light): 1,075 (high beam), 430 (low beam)
- Effective lumen output (per light): 720 (high beam), 240 (low beam)
- Nominal LED color temperature: 5000 K
- Current draw: 1.14 amps (high beam), 0.41 amps (low beam)
Compatibility
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
- Model year 2021 and newer XUV560E, XUV560E S4, XUV590E, XUV590E S4, XUV590M, and XUV590M S4 Utility Vehicles
Electrical harness requirements
XUV835/XUV865 | Attachment harness required (see below) |
E | 1, 2 |
M (open station) | 2 |
M (cab, factory installed) | 2 |
1 | E-spec attachment harness |
2 | Front attachment harness |
3 | Roof attachments harness |
4 | Front cab harness |
5 | Rear cab harness |
6 | Dash port harness |
Key features
- The LED driving lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
- Beam pattern: driving (focused, intense beam of light good for illuminating a stretch of road directly in front of the vehicle)
- Lamp sealing: IP69K
- Light output (per light): 1150 lumens
- LED color temperature: 5000 K
- Amp draw (per light): 1.4 amps
- 6 LEDs per light
- Aluminum housing
Compatibility
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- HPX Utility Vehicles
LED Single Beam Headlights - 576GMBUC10876
Key features
- The LED work lights can be mounted on the front occupant protective structure (OPS), front cab, rear OPS, rear cab, or brush guard
- Beam pattern: flood (spread of light over a wider, shorter distance)
- Lamp sealing: IP69K
- Light output (per light): 1200 lumens
- LED color temperature: 5000 K
- Amp draw (per light): 1.4 amps
- 6 LEDs per light
- Aluminum housing
Compatibility
- Model Year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model Year 2018 to current XUV835 and XUV865 Utility Vehicles
- Model Year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- HPX Utility Vehicles
Mirrors
Key features
- Convex mirror reflects a wide-angle image to help the operator see behind the vehicle
- Connected to ball stud for easy adjustment
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Kit allows mirrors to be installed on either an open-station or cab vehicle
- Mirrors can be easily adjusted based on operator preference
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Operator's Station
Key features
- Allows the cell phone and tablet mount to be installed in the upper dash location
- Required for cell phone mount if mounted in the lower dash location
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Cell phones, global positioning system (GPS), and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator station.
For proper machine operation, it is critical that accessory devices and tools be located and mounted where they are accessible but do not interfere with visibility and controls. The new RAM® mount kit has been specially developed to meet this need in John Deere tractors and now utility vehicles.
Simply remove the large wing nut from the assembly, insert the stud into any open hole in the occupant protective structure (OPS), and tighten down the jam nut.
Key benefits:
- Patented RAM X-Grip™ holder fits most cell phones and similar devices including iPod®, iPad®, iPhone®, BlackBerry®, Samsung Galaxy® and others.
- Mounts to the holes in the OPS
- Ball joints allow for variable positioning
- Holds firm even in rugged terrain
- The holder is compatible with many other RAM® products with their B size or 25.4-mm (1-in.) ball accessories
The RAM X-Grip has a clean and clever four-leg design that sports great holding power without hiding the phone behind foam pads and plastic.
Features:
- Rustproof
- High-strength composite and stainless-steel construction
- Spring-loaded holder expands and contracts for custom fit
- Minimum width: 1.875 in. (47 mm)
- Maximum width: 3.25 in. (82 mm)
- Depth: 0.875 in. (22 mm)
- Rubber-coated tips will hold device firm and stable
- Easy access grip knobs for quick release of your device
Warranty:
90 days, limited.
RAM and RAM X-Grip are trademarks of National Products Inc. iPad, iPod, and iPhone are trademarks of Apple, Inc. BlackBerry is a trademark of Research In Motion Limited (RIM). Samsung Galaxy is a trademark of Samsung Electronics Co.
Key features
- Shades occupants from the glare of sunlight
- Hinged design
- Tan color
- Kit includes left and right visor. Rearview mirror kit required for installation.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Keeps tablet at the operator’s fingertips for doing jobs such as soil sampling
- Utilizes a RAM® mount to easily move tablet to desired location
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
RAM is a trademark of National Products, Inc.
Radio
Key features
- Kit includes:
- Wiring harnesses
- SiriusXM® radio antenna/tuner (XM ready head unit required – sold separately)
- Two 13.3-cm (5.25-in.) upper speakers
- Subwoofer
- Bluetooth® wireless microphone
- Jensen® speakers
- Waterproof
- 45-W root mean square (RMS) power each
- 135-W peak power each
- Jensen subwoofer
- Waterproof
- 20.3-cm (8-in.) amplified subwoofer
- Maximum power: 200 W
- Aluminum mesh grille
- Aluminum housing
- The head unit is sold separately through Parts. The operator must choose one of the following two head units to complete the stereo:
- SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM satellite radio, and Bluetooth technology
- SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth technology
NOTE: Must order head unit through Parts.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Requires base radio kit
SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. Jensen is a trademark of Electronics Trademark Holding Company LLC.
Key features
- Kit includes:
- Wiring harness
- AM/FM antenna
- Head unit mounting bracket
- Two 13.3-cm (5.25-in.) speakers
- Jensen® speakers
- Waterproof
- 45-W root mean square (RMS) power each
- 135-W peak power each
- The head unit is sold separately through Parts. The operator must choose one of the following three head units to complete the stereo:
- SWJHD1130 – heavy-duty stereo with AM/FM, weatherband, and auxiliary input
- SWJHD1635BT – heavy-duty stereo with AM/FM, weatherband, auxiliary input, SiriusXM® satellite radio, and Bluetooth® wireless technology
- NOTE: To complete the SiriusXM system, please order SWR169159 antenna and SWSXV200B tuner.
- SWJHD36AMIC – heavy-duty stereo with AM/FM, weatherband, compact disc (CD), auxiliary input, SiriusXM satellite radio, USB 2.0, and Bluetooth wireless technology
- NOTE: To complete the SiriusXM system, please order SWR169159 antenna and SWSXV200B tuner.
NOTE: Must order head unit through Parts.
Compatibility
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
Jensen is a trademark of Electronics Trademark Holding Company LLC. SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc.
Roof
Key features
- Made from single-piece construction that mounts to the top and rear of the occupant protective structure (OPS)
- Made from premium, heavy-duty, 600 denier-solution dyed, water-resistant, UV-stabilized polyester for mold and tear resistance
- Durable, polyvinyl chloride (PVC) rear window resists yellowing or cracking. Window opens easily with a zipper and can be secured in place with straps.
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Compatible with the following cab components:
- Cab doors – both poly and canvas
- Full poly windshield
- Glass windshield
Key features
- Easily installs in minutes
- High-strength, compression-molded poly
- Molded-in channels direct water away from the front of the roof and away from occupants
- Molded-in pockets for auxiliary lights enhance the style of the vehicle
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Enhances the appearance of the operator station with a molded, soft-touch, automotive-style roof headliner
- Made from 3.175-mm (1/8-in.) thick sound-dampening material for improved occupant comfort
- Easily attaches to the roof with cap screws and push darts
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Roof Seal Kit - 576GMBUC10711
Seat
Overview
Bench seat covers are available for full-size Gator™ utility vehicles.
Benefits
- Protection for the bench seat from wear and stains
- Constructed with military-grade CORDURA® fabrics
- Quick and easy installation
- MOLLE attachment locations (MOLLE attachments available through Order Zone)
- Easy access to seatbelts
- Available in three color options: black, Realtree EDGE® camo, or coyote brown
Additional details
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone.
CORDURA is a trademark of INVISTA North America, LLC. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Key features
- Protection for the bench seat from wear and stains
- Elastic-hem cord closure for easy adjustment
- Easy access to seatbelts
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Ordering information
Available through Order Zone
Kit includes two comfort straps for the left and right seat belts.
- Provides relief to the operator's and passenger's upper body when driving over rough terrain by allowing the seat belt to stretch when the seat belt locks
- Moves the upper mounting point of the seat belt down 6 in. (152 mm)
- Can be mounted to both the driver- and passenger-side upper mounting point of the three-point seat belt
- Compatible with all model year 2017 - current Gator™ HPX, XUV625i, XUV825i, XUV825i S4, XUV855D, XUV855D S4, XUV560, XUV560 S4, XUV590i, XUV590i S4, and RSX860i Utility Vehicles when equipped with standard Occupant Protective Structure (OPS)
- Compatible only with standard Occupant Protective Structure (OPS), for deluxe cab frame, order BM22703
Spacers
Use on utility vehicles
The additional space provided on utility vehicles allows for more comfortable operation between 30-in. (762-mm) rows. Spacers simply bolt to the axle hub and the wheels to the spacer.
NOTE: Wheel spacers are only compatible with steel wheels without the center caps installed.
Use on tractors
Use the wheel spacer kit for tractors when installing tire chains with the standard 26x12-12 heavy-duty all-purpose (HDAP) tires and for all four-wheel steer (4WS) tractors using the LP39859 TerraGrip traction belts (pair) on 26x10.5-12 tires:
-
The wider 26x12-12 tires, used in combination with four-wheel steering, on the X729, X739, and X749 Tractors do not allow adequate clearance for the tire chains, so the wheel spacer kit is required.
-
Spacers simply bolt to the axle hub and the wheels to the spacer.
-
BM22725 may also be used in all applications where the BM18021 wheel spacer kit has been used.
-
BM22725 has additional hardware and an updated operator's manual compared to the BM18021 wheel spacer kit.
-
BM18021 was developed for use on the 400 Series (425, 445, and 455) Four-Wheel Steer Tractors for installing tire chains on the 4WS models when using 23x10.50-12 rear tires.
-
-
The wheel spacer kit must be removed for use with the 54-in. (137-cm) Mower Deck on X700 Tractors.
Sprayers
The 45-gal. (170-L) Gator bed sprayer is designed to work with the Gator vehicles equipped with the steel bed or deluxe cargo box. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 43-in. boom that sprays a 120-in. swath. It's equipped with a 20-ft hose and a spray wand for spot spraying lawns, shrubs, trees, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft. It comes equipped with rubber feet and custom brackets, which secure to the Gator bed, for a no tools mount.
Special features:
- 45-gal. (170-L) capacity
- Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
- Brackets allow boom height adjustment
- 100 psi SHURflo diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage
- The fully adjustable brass spray wand tip achieves streams up to 30 ft
- Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
- Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
- On/off switch located near operator
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- 12-V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
45 U.S. gal. (170 L) |
|
Pump |
|
Diaphragm material |
|
2.1 U.S. gpm (8 L/min) | |
Remote spray method |
|
Spray wand |
|
Tip material |
|
Adjustment | Fan-to-stream |
Hose length | 20-ft nylon reinforced rubber |
Boom |
|
Boom width | 43-in. (109 cm) fixed |
Spray swath | 120-in. (305 cm) |
Spray tip(s) | Three - TF-VP3 |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
|
Ordering information
Contact the local John Deere dealer for availability and pricing information.
45-gal. (170-L) Gator bed sprayer
Order number: LP20852
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 45-gal. (170-L) capacity, high volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.
NOTE: Sprayer shown above with optional 150-in. precision boom (LP22885).
High-performance features:
- 45 psi, 3.6 gpm SHURflo® diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 35-ft stream
- Equipped with a 20-ft hand wand hose with side mount hose tender for convenience
- Glycerin-filled pressure gauge and TeeJet™ pressure regulation/recirculation valve
- Choice of booms (sold separately)
- On/off capabilities in the palm of your hand with the included sprayer remote control (LP22912)
- 12V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Brackets secure to Gator bed, no tools or additional strapping required after initial set-up
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Pump |
|
Diaphragm material |
|
3.6 U.S. gpm (13.6 L/min) | |
Remote spray method |
|
Spray wand |
|
Tip material |
|
Adjustment | Fan-to-stream |
Hose length | 20-ft - 1/2-in. nylon reinforced rubber |
Gauge |
Glycerin filled |
Spray control |
|
Boom (sold separately) |
|
Option 1 | 150-in. spray width precision folding (5 tip) |
Option 2 | 120-in. spray width (3 tip) |
Option 3 | 24-ft boomless nozzle |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
|
Ordering information
Contact the local John Deere dealer for availability and pricing information.
High-performance 45-gal. (170-L) Gator bed sprayer
Order number: LP22908
SHURflo is a U.S.-registered trademark of Sta-Rite Industries, LLC. Viton is a U.S.-registered trademark of DuPont Performance Elastomers. Santoprene is a trademark of Exxon Mobil Corporation.
The sprayer is a self-contained unit that allows the user to spray trees and shrubs with the spray wand or broadcast spray in a 3.05-m (10-ft) swath with the spray boom.
Key features
-
Shurflo pump operates at 6.9 bar (100 psi) and pumps 8 L/min (2.1 gpm)
-
Spray boom is easily removed when not needed
- Fully adjustable brass spray wand tip achieves streams up to 9.15 m (30 ft)
-
Mounts without the use of tools
-
Brackets secure to Gator bed, no bungees required
-
A built-in sump is provided to completely clean out the spray material
-
Includes Gator accessory wiring harness, complete with quick-disconnects, for convenient electrical hookup
-
Check valves in boom tips prevent siphoning and dripping
- Equipped with a 5.8-m (19-ft) hand wand hose for convenience
-
Large threaded cap makes filling up easy
-
Easy-to-read gallon marks are molded in
Ordering information
Contact your local John Deere dealer for availability and pricing information.
170-L (45-gal.) Gator bed sprayer
Order number: LP20851
The 340-L (90-gal.) Gator bed sprayer is designed to work with any Gator model with load capacities of 363 kg (800 lb) or greater. Extreme capacity is great for athletic fields, a farmette, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 109-cm (43-in.) boom that sprays a 3.05-m (10-ft) swath. Engineered brackets secure the sprayer to the Gator bed with no tools or additional tie-downs required.
Special features:
- 340-L (90-gal.) capacity (custom brackets and plumbing combines two 170-L [45-gal.] tanks)
- Brackets secure to Gator bed, no tools or additional strapping required after initial setup
- Brackets allow boom height adjustment
- 8-L/min (2.1-gpm) Shurflo diaphragm-type pump with 6.9-bar (100 psi) shutoff can be run dry without damage
- Fully adjustable brass spray wand tip achieves streams up to 9.15 m (30 ft)
- Equipped with a 5.8-m (19-ft) hand wand hose with side mount hose tender for convenience
- Check valves in boom tips prevent siphoning and dripping, which can cause lawn spotting
- On/off switch located near operator
- 12-V plug included with wiring harness for convenient electrical hookup
- Easy boom removal for added convenience
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Capacity |
340-L (90 U.S. gal.) |
Pump |
|
Type |
Electric motor and diaphragm |
Manufacturer |
Shurflo |
Operating pressure |
6.9 bar (100 psi) |
Current draw |
7 amp |
Valve material |
Viton™ |
Diaphragm material |
Santoprene™ |
Spray flow rate |
8 L/min (2.1 U.S. gpm) |
Sump strainer |
Stainless steel |
Remote spray method |
|
Spray wand |
Polypropylene with Viton components |
Tip material |
Brass |
Adjustment | Fan-to-stream |
Hose length | 5.8-m (19-ft) nylon reinforced rubber |
Boom |
|
Boom width | 109 cm (43 in.) fixed |
Spray swath | 3.05 m (10-ft) |
Spray tip(s) | Three - TF-VP3 |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
All Gator models with bed capacity of 363 kg (800 lb) or greater |
Shipping weight |
20 kg (125 lb) |
Net weight |
19 kg (80 lb) |
Ordering information
Contact a local John Deere dealer for availability and pricing information.
340-L (90-gal.) Gator bed sprayer
Order number: LP20853
Viton is a trademark of The Chemours Company FC, LLC. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box or steel bed. With a 340-L (90-gal.) capacity, high-volume electric pump, and premium pistol grip spray gun, it provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray and de-icer. Engineered brackets secure the sprayer to the Gator bed with no tools, or additional tie-downs required.
NOTE: Sprayer shown above with optional 7.3-m (24-ft) boomless spray nozzles (LP22884).
High-performance features:
- 6.9-bar (100-psi), 15.1-L/min (4-gpm) SHURflo diaphragm-type pump is designed for high hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single hand mist to 10.7-m (35-ft) stream
- Equipped with a 6.1-m (20-ft) hand wand hose with side mount hose tender for convenience
- Glycerin-filled pressure gauge and TeeJet® pressure regulation/recirculation valve
- Choice of booms (sold separately)
- On/off capabilities in the palm of your hand with the included sprayer remote control (LP22912)
- 12-V plug included with wiring harness, complete with quick-disconnects, for convenient electrical hookup
- Brackets secure to Gator bed, no tools or additional strapping required after initial setup
- Control valve channels spray to either the boom or spray wand
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
Specifications
Capacity |
340 L (90 U.S. gal.) |
Pump |
|
Type |
Electric motor and diaphragm |
Manufacturer |
Shurflo |
Operating pressure |
6.9 bar (100 psi) |
Current draw |
7 amp |
Valve material |
Viton™ |
Diaphragm material |
Santoprene™ |
Spray flow rate |
15.1 L/min (4 U.S. gpm) |
Sump strainer |
Stainless steel |
Remote spray method |
|
Spray wand |
Poly, alloy, and brass with Viton components |
Tip material |
Brass and stainless |
Adjustment | Fan-to-stream |
Hose length | 6.1-m (20-ft), 1.3-cm (1/2-in.) nylon reinforced rubber |
Gauge |
Glycerin filled |
Spray control |
Pressure regulation/recirculation |
Remote control |
12-V receiver with dual FOB remote on/off |
Boom (sold separately) |
|
Option 1 | 3.05-m (10-ft) boom (LP22911) |
Option 2 | 3.8-m (12.5-ft) precision spray boom (LP22885) |
Option 3 | 7.3-m (24-ft) boomless spray nozzle (LP22884) |
Mounting |
|
Steel bed | Custom tailgate clamp mounting |
Deluxe cargo box | Custom brackets secure to tie-downs |
Compatibility |
All Gator models with a bed capacity of 363 kg (800 lb) or greater |
Shipping weight |
57 kg (125 lb) |
Net weight |
45 kg (100 lb) |
Ordering information
Contact a local John Deere dealer for availability and pricing information.
340-L (90-gal.) high-perfromance Gator bed sprayer
Order number: LP22909
TeeJet is a trademark of Spraying Systems Co. Viton is a trademark of The Chemours Company FC, LLC. Santoprene is a trademark of Exxon Mobil Corporation.
The high-performance (HP) single-tank 340.7-L (90-gal.) Gator bed sprayer is designed to work with Gator vehicles equipped with the deluxe cargo box that have a capacity in excess of 362.9 kg (800 lb). The custom molded 340.7-L (90-gal.) tank provides a low profile with capacity perfect for athletic fields, farmettes, commercial maintenance, or any large property. It provides an excellent way to apply spray materials such as liquid fertilizer, weed killer, tree spray, and de-icer. Custom engineered mounting hardware ensures the unit stays secure without the use of additional straps or tie-downs. Cover ground quickly with flexible boom options. (Boom sold separately).
High-performance features:
- 100 psi, 4-GPM diaphragm-type pump is designed for high-hour applications and can be run dry without damage
- Premium pistol grip spray gun, designed for single-hand mist to 10.7-m (35-ft) stream.
- Side-mount hose tender for easy hose access and storage
- Glycerin-filled pressure gauge
- TeeJet™ pressure regulation/recirculation valve for precise sprayer calibration
Additional features:
- Custom engineered brackets secure to Gator bed with no tools or additional straps
- Control valve channels spray to either the boom or spray wand
- Includes Gator accessory wiring harness, complete with quick disconnects, for convenient electrical hookup
- Rugged translucent yellow tank with molded fill level indicators (in gallons)
90 Gallon Rate Control Sprayer - 576GMLP68194
Sprayer Conversion Kit - 576GMLP68195
Spreaders
Overview
The 0.3-m3 (10-cu ft) in-bed spreader easily expands the capabilities and productivity of operators with Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles. Featuring exclusive controls and ample hopper capacity, these spreaders are the ideal spreading solution to help operators quickly apply large amounts of ice melt materials.
Benefits
- Easily control the mounted spreader with the 9-cm (3.5-in.) weatherproof, color display. Four push buttons are used to navigate functions including independent adjustment of the auger and spinner speeds, vibratory motor settings, auger reverse to clear out jammed material, and unload mode to completely empty the hopper. The display easily mounts to the vehicle's dash by utilizing existing holes.
- If a controller area network (CAN) bridge (BUC10316) is installed on the utility vehicle, operators can access automatic stop, which halts spreader operation when the vehicle stops moving.
- Enjoy long periods of spreading ice melt materials with the ample volume of the 0.3-m3 (10-cu ft) poly hopper.
- The 7.6-cm (3-in.) diameter steel auger is powered by a direct-drive motor and features variable speed control, automatic jam clearing, and reverse to clear jammed material.
- Quickly cover large areas up to 9.1-m (30-ft) wide using the 30.5-cm (12-in.) diameter steel spinner with independent speed control.
- This entire assembly can be quickly disconnected to access the vehicle's hitch and reduce the spreader's overall footprint for storage.
- Eliminate bridged material inside the hopper with the vibratory motor that features four modes (pulse, low, high, and ramp).
- A top screen and fitted tarp are included to help with material handling. The top screen prevents clumped material from entering the hopper, while the fitted tarp helps keep material dry.
- Get a dedicated, secure fit to the cargo box from the provided mounting hardware. Two stainless-steel tie-down rods secure the spreader to the tie-down hooks in the bed.
Additional details
The 0.3-m3 (10-cu ft) in-bed spread is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.
Specifications | |
Measurements | |
Length - overall | 183 cm (72 in.) |
Length - spinner removed | 154 cm (60.5 in.) |
Width | 123.2 cm (48.5 in.) |
Height - bottom of spinner to top of hopper | 105 cm (41.4 in.) |
Height - bottom of spreader to top of hopper | 67 cm (26.4 in.) |
Auger diameter | 7.6 cm (3 in.) |
Spinner diameter | 30.5 cm (12 in.) |
Capacities | |
Hopper volume - filled to top screen | 0.3 m3 (10 cu ft) |
Spreader weight - hopper empty | 138 kg (305 lb) |
Spreader weight - hopper full | Varies by material – consult the operator's manual for weight limits |
Materials | |
Hopper | Single-piece polyethylene |
Spinner and frame | Powder-coated steel |
Top screen | 7.9-mm (5/16-in.) powder-coated steel rod |
Motors - auger, spinner, vibrator | 12-V, semi-sealed |
Operation | |
Maximum spreading width | 9.1 m (30 ft) |
Display functions |
|
Warranty | |
Residential | 1 year |
Commercial | 6 months |
-
0.5-m 3 (17-cu ft) capacity
-
453.6-kg (1000-lb) load limit
-
Copolymer polypropylene is compression molded for optimum thickness in all areas and maximum durability
-
Heavy-duty, reinforced structural frame with a 25.4-mm (1-in.) diameter, one-piece axle to handle weight, speed, and bumps
-
Spring-loaded dump latch for easy dumping and positive lock to prevent accidental unlocking when being towed
-
Double-sealed, high-speed roller bearings to handle a 48-km/h (30-mph) maximum speed
-
Heavy-duty polyethylene bed
-
Accepts dividers to separate cargo (template included)
-
-
All-terrain knobby tires
-
Provides good flotation and traction in mud, sand, and other wet or soft areas
-
Flexes over bumps and ruts for a smoother, more controlled ride
-
Minimizes ground compaction to save turf and prevent ruts in soft ground
-
-
Poly fenders to keep the operator, cart, and vehicle clean
-
Suitable for use with most John Deere utility vehicles equipped with a 48-mm (1.875-in.) ball hitch, including Gator™ Utility Vehicle models TX, TX Turf, TH 6x4, TH 6x4 Diesel, all HPX 4x4 models, and all XUV models
-
Quality and styling compatible with other John Deere equipment
Ordering information
Contact your local John Deere dealer for availability and pricing information.
17AT Cart
Order number: LPPCT17ATJD
Overview
Whether it's a snow removal contractor, a grounds crew at a college campus, or a municipality working downtown, a drop spreader is a professional's choice for precision spreading. This drop spreader combines a large, 0.14-m3 (5-cu ft) material capacity with a precise 109-cm (43-in.) spread width that's ideal for salting sidewalks. Heavy-gauge stainless-steel construction, simple drives, and an industry-exclusive removable rotor tray make this attachment the ultimate spreading solution.
Benefits
- Enjoy long periods of spreading with the stainless-steel hopper that offers 0.14-m3 (5-cu ft) of material capacity.
- The stainless-steel rotor is segmented to enhance the accuracy of material distribution with the 109-cm (43-in.) spread width.
- Simple, enclosed drives help enhance the spreader's longevity.
- Get perfect, tool-free selection of material flow with a six-position gate.
- Experience an easy, tool-free cleanout from the industry-exclusive removable rotary tray.
- Eliminate material bridging with the vibration motor.
- Enhance productivity with the multipurpose use of the spreader. Use it in the winter to spread ice-melt material and in the summer to apply fertilizer, topsoil, and lime.
Additional details
The 0.14-m3 (5-cu ft) drop spreader is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.
To adapt this spreader to a XUV835 or XUV865 Utility Vehicle, the XUV835/XUV865 hitch and display (LP69908) is required.
Specifications:
- Hopper capacity: 159 kg (350 lb), varies by material
- Rotor speed: 1.3 to 6 rpm
- Electrical: 12 V
Overview
The 0.085-m3 (3-cu ft) fertilizer spreader for Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles is ideal for applying fertilizer, seed, herbicide, and other fine-particle materials. This spreader features a poly hopper with up to 109 kg (240 lb) of material capacity to minimize refilling. After pairing with a Gator hitch and display (LP69908), spread-width adjustments can be made up to 6.1 m (20 ft).
Benefits
- Enjoy long periods of spreading with a poly hopper that offers 109 kg (240 lb) of material capacity.
- Get long-term durability from the stainless-steel, 25.4-cm (10-in.) diameter spinner.
- Control the flow of fine materials through the adjustable gate operated with an electric actuator.
- Control the spread pattern with the side deflector.
- Satisfy heavy-duty spreading demands using the 1/4-kW (1/3-hp), semi-sealed electric motor.
- Improve durability in rugged conditions with a powder-coated steel frame.
Additional details
The 0.085-m3 (3-cu ft) fertilizer spreader is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.
To adapt this fertilizer spreader to an XUV835 or XUV865 Utility Vehicle, the XUV835/XUV865 hitch and display (LP69908) is required.
Overview
The 0.085-m3 (3-cu ft) salt spreader for Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles is the convenient spreading solution for applying rock salt in winter weather. This spreader features a poly hopper with up to 109 kg (240 lb) of material-carrying capacity. After pairing with a Gator hitch and display (LP69908), spread-width adjustments can be made up to 7.6 m (25 ft) wide.
Benefits
- Enjoy long periods of spreading with the poly hopper that offers 109 kg (240 lb) of material capacity.
- Easily move large-particle material, like rock salt, to the spinner with the vertical auger.
- NOTE: The spreader is not well suited to handle fine-particle materials like calcium chloride.
- The 25.4-cm (10-in.) diameter, nylon, glass-reinforced spinner withstands corrosive ice melt products for long-term use.
- Satisfy heavy-duty spreading demands with the 1/4-kW (1/3-hp), semi-sealed electric motor.
- Improve durability in rugged conditions with a powder-coated steel frame.
Additional details
The 0.085-m3 (3-cu ft) salt spreader is compatible with model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R Utility Vehicles.
To adapt this salt spreader to an XUV835 or XUV865 Utility Vehicle, the XUV835/XUV865 hitch and display (LP69908) is required.
Overview
The hitch and display for Gator XUV835 and XUV865 Full-Size Crossover Utility Vehicles are specifically designed to work with a 0.085-m3 (3-cu ft) salt spreader (LP69909), a 0.085-m3 (3-cu ft) fertilizer spreader (LP69910), or a 0.14-m3 (5-cu ft) drop spreader (LP69911).
Each hitch features a spring-loaded mechanism to allow for quick spreader attachment and removal. The hitch can also be lowered to provide easy access for routine service.
This latest generation of utility vehicles offer greater electronic capabilities than ever before. As a result, operators have access to enhanced functionality and controls, which is seen through the 9-cm (3.5-in.) weatherproof, color display.
Benefits
- Easily control the mounted spreader with the 9-cm (3.5-in.) weatherproof color display. Four push buttons are used to navigate functions including independent adjustment of the auger and spinner speeds and activating the vibratory motor on 0.14-m3 (5-cu ft) drop spreaders. The display mounts easily to the vehicle's dash by utilizing existing holes.
- If a controller area network (CAN) bridge (BUC10316) is installed on the Gator, operators will also have access to automatic stop functionality, where spreader operation halts when the vehicle stops.
- Designed specifically for Gator utility vehicles, the hitch ensures safe and secure spreader fitment.
- The powder-coated steel hitch provides the utmost support and durability.
Additional details
The hitch and display are compatible with the following models:
- Model year 2018 and newer XUV835E, XUV835M, XUV835R, XUV865E, XUV865M, and XUV865R
- 0.085-m3 (3-cu ft) salt spreader (LP69909)
- 0.085-m3 (3-cu ft) fertilizer spreader (LP69910)
- 0.14-m3 (5-cu ft) drop spreader (LP69911)
Storage
Label kit for toolboxes (Green & Yellow) - 576GMBM26220
NOTE: Available through OrderZone.
The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Dual military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
Available through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Velcro flap closure
- Padded to protect device and contents
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 6-in. (152.4-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
Available through OrderZone
Compatible with bench seat covers and operator protection system (OPS) MOLLE storage panel
Special features:
- Velcro flap closure
- Padded to protect device and contents
- Constructed with military-grade Cordura™ fabrics
- Utilizes the MOLLE attachment system
- Pair of 6-in. (152.4-mm) MOLLE sticks included
- Available in black or REALTREE HARDWOODS HD™ pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made In U.S.A.
Cordura is a trademark of INVISTA for durable fabrics. REALTREE HARDWOODS HD is a trademark of Jordan Outdoor Enterprises Limited.
NOTE: Available through OrderZone.
The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade rapid extraction clips
- Fits standard round 1.1-kg (2.5-lb) fire extinguishers
- Padded to protect contents
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 15.2-cm (6-in.) MOLLE sticks included
- Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
NOTE: Available through OrderZone.
The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade rapid extraction clips
- Fits standard round 1.1-kg (2.5-lb) fire extinguishers
- Padded to protect contents
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 15.2-cm (6-in.) MOLLE sticks included
- Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
NOTE: Available through OrderZone.
The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Dual military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
NOTE: Available through OrderZone.
The large MOLLE storage pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Dual military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Built-in drain hole
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
NOTE: Available through OrderZone.
The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
Cordura is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
NOTE: Available through OrderZone.
The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
Cordura is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
Overview
This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.
Benefits
- Military-grade zipper and pull
- Constructed with military-grade CORDURA® fabrics
- Easily attaches with built-in straps
- Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
- Durable inner liner made of high-density coated pack cloth nylon fabric
Additional details
- Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
NOTE: Available through OrderZone.
The MOLLE fire extinguisher pouch is compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade rapid extraction clips
- Fits standard round 1.1-kg (2.5-lb) fire extinguishers
- Padded to protect contents
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 15.2-cm (6-in.) MOLLE sticks included
- Available in black, coyote brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
Overview
This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.
Benefits
- Military-grade zipper and pull
- Constructed with military-grade CORDURA® fabrics
- Easily attaches with built-in straps
- Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
- Durable inner liner made of high-density coated pack cloth nylon fabric
Additional details
- Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
Overview
This water bottle pouch attaches to the backrest of utility vehicle seat covers that use the military-inspired modular lightweight load-carrying equipment (MOLLE) attachment system. The pouch fits up to a 0.95-L (32-oz) wide-mouth bottle.
Benefits
- Military-grade zipper and pull
- Constructed with military-grade CORDURA® fabrics
- Easily attaches with built-in straps
- Customizable with three colors: black, coyote brown, and Realtree EDGE™ camo
- Durable inner liner made of high-density coated pack cloth nylon fabric
Additional details
- Dimensions – 22.9 cm (9 in.) high, 10.2 cm (4 in.) wide, and 10.2 cm (4 in.) long
- Limited 1-year warranty
- Made in the USA
CORDURA is a trademark of INVISTA North America S.a.r.l. Realtree EDGE is a trademark of Jordan Outdoor Enterprises, Ltd.
This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Side-door opening toolbox features:
- 125-L (4.4-cu ft) sealed storage
- Heavy-gauge sheet metal
- D-rings for tie downs
- Fully sealed lockable latch
- Sealed door
- Door can also be used as a work bench when down
- Can be mounted on either side of the cargo box
Weight |
29 kg (64 lb) |
Capacity |
34 kg (75 lb) |
Dimensions |
Full box: 109.4-cm (43.1-in.) long, 35-cm (13.8–in.) wide, and 32.5-cm (12.8–in.) tall |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
- BM26220 – green and yellow
- BM26218 – olive and black
- BM26219 – camo
This toolbox is compatible with the following Gator™ Utility Vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model year 2018 and newer HPX615 and HPX815
NOTE: Available through OrderZone.
The small MOLLE storage pouches are compatible with bench seat covers and the operator protection system (OPS) MOLLE storage panel.
Special features:
- Military-grade zippers and pulls
- Constructed with military-grade CORDURA® fabrics
- Utilizes the MOLLE attachment system
- Pair of 127-mm (5-in.) MOLLE sticks included
- Available in black, brown, or Realtree Hardwoods HD® camo pattern
- Inner liner made of high-density coated pack-cloth nylon fabric
- Limited 1-year warranty
- Made in the USA
Cordura is a trademark of INVISTA North America, LLC. Realtree Hardwoods HD is a trademark of Jordan Outdoor Enterprises, Ltd.
This tailgate kit with brake lights and taillights is specifically designed for compatibility with the top and side-door toolboxes (BM26162 and BM26160).
The tailgate can be installed in minutes once the toolbox and tail lights are installed by bolting them to the tailgate bracket.
Optional label kits are designed to fit with this tailgate:
- BM26220 – green and yellow
- BM26218 – olive and black
- BM26219 – camo
The tailgate is compatible with the following Gator™ utility vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model Year 2018 - current HPX615 and HPX815
This custom toolbox was specifically designed for users desiring more integrated sealed storage in a cargo box.
Top door opening toolbox features:
- 125-L (33-gal.) sealed storage
- Heavy-gauge sheet metal
- D-rings for tie downs
- Fully sealed lockable latch
- Sealed door
- Toolbox divider
- Removable tool tray
- Can be mounted on either side of the cargo box
|
Top door opening toolbox |
Toolbox weight |
32.7 kg (72 lb) |
Toolbox capacity |
32.7 kg (75 lb) |
Toolbox dimensions |
-Tray: 27.4-cm (10.8-in.) long x 21.8-cm (8.6-in.) wide x 7.1-cm (2.8–in.) deep -Left-hand side compartment: 46.2-cm (18.2–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9–in.) tall -Right-hand side compartment: 62.7-cm (24.7–in.) long X 32.5-cm (12.8–in.) wide X 35.3-cm (13.9-in.) tall -125-L (33-gal.) total volume |
The toolbox can be installed in minutes by simply removing the cargo box sides and tailgate, and bolting the toolbox onto the cargo box.
The toolbox requires the tailgate with brake and tail lights kit (BM26161) and optional label kit:
- BM26220 – green and yellow
- BM26218 –olive and black
- BM26219 – Camo
This toolbox is compatible with the following Gator™ Utility Vehicle models:
- TX
- TX Turf
- TE
- TH
- XUV625i
- XUV825i/E/M
- XUV825i/E/M S4
- XUV855D/E/M
- XUV855D/E/M S4
- XUV835E/M/R
- XUV865E/M/R
- Model year 2018 and newer HPX615 and HPX815
Key features
- Easily installs under the hood in models that do not have heating, ventilation, and air conditioning (HVAC) or the heater kit
- Storage tub has a volume of 21 L (5.5 gal.)
- Rough dimensions: 88.1 cm x 20.3 cm x 38.2-cm deep (34.7 in. x 8 in. x 15-in. deep)
- Removable drain plug
- Removable tool tray
- Dimensions: 45.5 cm x 19.3 cm x 4.6-cm deep (18 in. x 7.6 in. x 2-in. deep)
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- Only compatible on these vehicles that do not have HVAC or heater kit installed
Suspension
Key features
- Higher spring rate and higher preload force versus standard springs prevent the vehicle from sagging with a heavy payload, such as a blade and cab
- Recommended when installing a cab or front blade
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- NOTE: M-spec cab (factory installed) and R-spec vehicles already come from the factory with the heavy-duty front and rear shocks.
Key features
- Higher spring rate and higher preload force versus standard springs prevent the vehicle from sagging with a heavy payload, such as with a cab, sprayer, or spreader
- Recommended when installing a cab, sprayer, or spreader, or when consistently hauling heavy loads in the cargo box
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
- NOTE: M-spec cab (factory installed) and R-spec vehicles already come from the factory with the heavy-duty front and rear shocks.
Tracks
Turn Signals
Key features
- Kit includes:
- Front/rear turn signals
- Hazards
- Backlit switches
NOTE: Not intended for use on public roadways.
Compatibility
- Compatible with all model year 2011 to current Gator™ XUV825 and XUV825 S4 Utility Vehicles
- Also requires turn signal light harness kit
- Compatible with all model year 2011 to current Gator XUV625i, XUV855, and XUV855 S4 Utility Vehicles
- Also requires turn signal light harness kit
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 | Attachment harness required (see below) |
M (open station) | 2 |
M (cab, factory installed) | 2 |
R | --- |
1 | E-spec attachment harness |
2 | Front attachment harness |
3 | Roof attachments harness |
4 | Front cab harness |
5 | Rear cab harness |
6 | Dash port harness |
Winch
Double the pulling power, change the pulling direction, and keep the winch in proper working order.
The accessories kit is essential gear for operators getting the most out of their winch:
-
Effectively anchors to trees/boulders
-
Change the pulling direction
-
Double the pulling capacity
The accessories kit includes:
-
Flexible tree strap
-
Snatch block
-
Shackle
Each kit comes in a black Cordura® heavyweight-nylon soft case.
Cordura is a trademark of INVISTA.
Key features
- Impressive pulling capacity of 2041 kg (4500-lb)
- Equipped with a water-resistant contactor that supplies the amperage required for higher pulling capacities
- Includes a 3.05-m (10-ft), water-resistant, plug-in remote for safe distance operation that plugs directly into the glove box
- 15.2 m (50 ft) of 5.6-mm (7/32-in.) synthetic rope with hawse fairlead
- Synthetic rope does not develop sharp burrs like steel rope and does not store as much potential energy when under load
- Ergonomic clutch handle
- Limited lifetime, 3-year electrical (North America) warranty offered through WARN
Compatibility
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
- M-spec and R-spec vehicles come from the factory winch ready, and no additional attachment harnesses are required
- Requires winch mounting kit to mount the winch either on the chassis or on the front or rear receiver
- Not compatible with winch mounts BM26252 and BM26393
Electrical harness requirements
XUV835/865 | Attachment harness required (see below) |
E | 1 |
1 | E-spec attachment harness |
2 | Front attachment harness |
3 | Roof attachments harness |
4 | Front cab harness |
5 | Rear cab harness |
6 | Dash port harness |
WARN is a trademark of WARN Industries, Inc.
Key features
- Wirelessly control winch from up to 15 m (50 ft) away
- Weatherproof transmitter has two large buttons, making it easy to operate even while wearing gloves
- Colored light-emitting diode (LED) lights provide clear operator feedback
- Kit includes wireless transmitter, receiver, holster, wiring, and mounting hardware
Compatibility
- Model year 2012 to current XUV550, XUV550 S4, XUV560, XUV560 S4, XUV590, XUV590 S4, and RSX Utility Vehicles
- Model year 2011 to current XUV625i, XUV825i, XUV825i S4, XUV855D, and XUV855D S4 Utility Vehicles
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Winch Mounting Kit
Key features
- Kit includes everything needed to mount the winch to the chassis
Compatibility
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
- Requires WARN VRX 2041-kg (4500-lb) winch (sold separately)
WARN is a trademark of WARN Industries, Inc.
Key features
- Ability to mount the winch on the front or rear receiver
- Kit includes everything needed to mount the winch to the receiver
Compatibility
- Model year 2018 and newer XUV835 and XUV865 Utility Vehicles
- Requires WARN VRX 2041-kg (4500-lb) winch (sold separately)
WARN is a trademark of WARN Industries, Inc.
Windshield
Key features
- Easily installs in minutes
- Made from two-sided, abrasion-resistant polycarbonate
- Seals against the occupant protective structure (OPS)
- A rear-panel option is recommended when a full windshield is installed to help keep dust out of the operator station
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Designed to deflect wind, dirt, and debris over the occupants
- Easily installs in minutes
- Made from two-sided, abrasion-resistant polycarbonate
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Tempered glass
- Heat-absorbing tinted glass absorbs solar radiation coming in through the window, reducing solar heat in the operator station
- Design allows for partial venting or a fully-open position
- One-handed operation opens the windshield with the aid of two gas struts
- Windshield-wiper ready (wiper sold separately)
- A rear panel option is recommended when a full windshield is installed to help keep dust out of the operator station
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Key features
- Wash away dirt and debris with a quick flip of a switch
- Washer bottle conveniently located behind access panel
- Washer fluid comes out of nozzle on wiper arm (windshield wiper kit required)
- Kit includes washer bottle, hose connections, and three-position switch
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 | Attachment harness required (see below) |
E | 1, 3, 4 |
M (open station) | 3, 4 |
M (cab, factory installed) | --- |
R | --- |
1 | E-spec attachment harness |
2 | Front attachment harness |
3 | Roof attachments harness |
4 | Front cab harness |
5 | Rear cab harness |
6 | Dash port harness |
Key features
- Clears water and debris off of the windshield for greater visibility
- Single-speed wiper
- Windshield washer ready (sold separately)
- Backlit switch installs into the dash
Compatibility
- Model year 2018 to current XUV835 and XUV865 Utility Vehicles
Electrical harness requirements
XUV835/865 | Attachment harness required (see below) |
E | 1, 3, 4 |
M (open station) | 3, 4 |
1 | E-spec attachment harness |
2 | Front attachment harness |
3 | Roof attachments harness |
4 | Front cab harness |
5 | Rear cab harness |
6 | Dash port harness |
Reviews
2 reviews
- Filter
- Star Rating
- Value
- Quality