7P Poly Utility CartEvery owner of a John riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes.Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak™ or ZTrak™ mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck.7P Poly Utility CartThe cart has a premium molded, high-density polyethylene box construction.Compression molding process allows polyethyl­ene to be the optimum thickness in all areas for superior strength and durability.Polyethylene body will not rust or dent; it stays looking new longer.0.75-in. (2-cm) x 2-in. (5-cm) stake pockets are molded in to make the addition of side extensions easy.Two vertical 0.75-in. (2-cm) molded channels on each side allow easy use of dividers to separate the box into two or three compartments.Ribs in the box bottom add strength and prevent the shovel from hitting bolts when emptying the cart.Sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.Styling is compatible with other John Deere equipment.Pneumatic tires provide turf tread for good flotation, shock absorption, and minimal rolling resistance.Wheels7P Utility Cart wheelWheels are mounted on a solid, one-piece axle for durability. Iron and Oilite® wheel bearings with grease fittings provide lubrication for long life.The pneumatic tires offer the following:Good flotationMinimal rolling resistanceShock absorptionSloped tailgateSloped tailgate for easy emptyingA sloped tailgate design makes emptying the box easier; there is no tailgate to loosen or remove.Tractor hitchSpring-pin tractor hitchA large-diameter hitch pin provides plenty of strength:Fast, easy attachment to the tractor hitchSpring pin to ensure the pin stays in placeTilt latchTilt latchAn easy-to-use, spring-loaded dump latch allows tilting the box for easier unloading. A steep dump angle makes emptying the cart easier.Model comparison chartComparison with similar modelsModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Specifications  7P8Y10P1316YS 17P1821Box capacityHeaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)17 cu ft (0.48 m3)17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)15 cu ft (0.42 m3)14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)Box dimensions Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)58.5 in. (148.6 cm)58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)15.5 in. (39.4 cm)15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBoltedMaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steelTailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-outPneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 plySize13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8Tread designTurfKnobbyTurfTurfTurfTurfTurfTurfRecommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealedGrease fittings on wheelsYesNoneYesYesYesYesYesNoneAxle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)14.25 in. (36.2 cm)14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipDump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degreesMaximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Tractor compatibility and requirementsUtility CartsChart below shows vehicle compatibility.An X indicates cart can be used with the pulling unit.NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.  7P8Y10P1316YS 17P1821EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740RX X     L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180X XXXXXX S240XXX XXXX  LT150, LT160, LT180, LT190, LTR180XXX XX  LX280, LX280AWS, LX289XXX XX  X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394XXX XXX X SST15, SST16, SST18XXX     G110XXXXXX  GT235, GT245XXXXXX  GX255, GX335, GX345, GX355XXXXXX  X500, X520, X530, X534, X540X570, X580, X584, X590XXXXXXX  X465, X475, X485, X495, X575, X585, X595XXXXXXXXX700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758XXXXXXXXFor proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:  Tractor Additional weightL100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180Two 30-lb (14-kg) wheel weights, frontTwo 42-lb (19-kg) suitcase weights, rearS240Two 34-lb (15-kg) wheel weights, front(4) 42-lb (19-kg) suitcase weights, rearLT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, frontTwo 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)LX280, LX280AWS, LX289X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394Two 34-lb (15-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, rearSST15, SST16, SST18One 88-lb (40-kg) weight kit, frontThree 40-lb (18-kg) weights, rearG100Two 50-lb (23-kg) wheel weights, rearTwo 42-lb (19-kg) suitcase weights, rearG110Two 50-lb (23-kg) plastic shell rear wheel weightsGT235, GT245Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearGX255, GX335, GX345, GX355X500, X520, X530, X534, X540X570, X580, X584, X590Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) wheel plastic shell weights, rearX465, X475, X485, X495, X575, X585, X595X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758Four 42-lb (19-kg) suitcase weights, frontTwo 70-lb (32-kg) wheel cast-iron starter weights, rearFour 50-lb (23-kg) cast-iron wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearSix 42-lb (19-kg) suitcase weights, rearOrdering informationPlease contact a local John Deere dealer for availability and pricing information.7P Poly Utility CartOrder number: LP21935Oilite is a trademark of Beemer Precision, Incorporated.

8Y Convertible Poly Utility Cart, push mode8Y Convertible Poly Utility Cart, tow-behind mode The 8-cu-ft (0.23-m3), 300-lb (136-kg) capacity 8Y Convertible Poly Utility Cart can be used to haul a variety of materials including lawn debris, sand, dirt, mulch, and plants. The unique convertible hitch allows changing the cart from tow-behind mode to push mode without tools.Key features include:Compatible with riding lawn tractors and garden tractorsDurable poly constructionAll-terrain pneumatic tiresConverts from tow cart to push cart without toolsLarge handle is provided for ease of useEvery owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.   NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Model comparison chartComparison with similar modelsModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Specifications  7P8Y10P1316YS 17P1821Box capacityHeaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)17 cu ft (0.48 m3)17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)15 cu ft (0.42 m3)14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)Box dimensions Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)58.5 in. (148.6 cm)58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)15.5 in. (39.4 cm)15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBoltedMaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steelTailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-outPneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 plySize13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8Tread designTurfKnobbyTurfTurfTurfTurfTurfTurfRecommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealedGrease fittings on wheelsYesNoneYesYesYesYesYesNoneAxle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)14.25 in. (36.2 cm)14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipDump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degreesMaximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Tractor compatibility and requirementsUtility CartsChart below shows vehicle compatibility.An X indicates cart can be used with the pulling unit.NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.  7P8Y10P1316YS 17P1821EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740RX X     L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180X XXXXXX S240XXX XXXX  LT150, LT160, LT180, LT190, LTR180XXX XX  LX280, LX280AWS, LX289XXX XX  X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394XXX XXX X SST15, SST16, SST18XXX     G110XXXXXX  GT235, GT245XXXXXX  GX255, GX335, GX345, GX355XXXXXX  X500, X520, X530, X534, X540X570, X580, X584, X590XXXXXXX  X465, X475, X485, X495, X575, X585, X595XXXXXXXXX700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758XXXXXXXXFor proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:  Tractor Additional weightL100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180Two 30-lb (14-kg) wheel weights, frontTwo 42-lb (19-kg) suitcase weights, rearS240Two 34-lb (15-kg) wheel weights, front(4) 42-lb (19-kg) suitcase weights, rearLT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, frontTwo 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)LX280, LX280AWS, LX289X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394Two 34-lb (15-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, rearSST15, SST16, SST18One 88-lb (40-kg) weight kit, frontThree 40-lb (18-kg) weights, rearG100Two 50-lb (23-kg) wheel weights, rearTwo 42-lb (19-kg) suitcase weights, rearG110Two 50-lb (23-kg) plastic shell rear wheel weightsGT235, GT245Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearGX255, GX335, GX345, GX355X500, X520, X530, X534, X540X570, X580, X584, X590Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) wheel plastic shell weights, rearX465, X475, X485, X495, X575, X585, X595X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758Four 42-lb (19-kg) suitcase weights, frontTwo 70-lb (32-kg) wheel cast-iron starter weights, rearFour 50-lb (23-kg) cast-iron wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearSix 42-lb (19-kg) suitcase weights, rearOrdering informationPlease contact a local John Deere dealer for availability and pricing information.8Y Convertible Poly Utility CartOrder number: LP22755Oilite is a trademark of Beemer Precision, Incorporated.

10P Poly Utility CartEvery owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials:FirewoodLawn debrisSandDirtMulchGarden toolsPlants and bushesThe 10P Utility Cart is designed, painted, and decaled to be compatible with other John Deere equipment:Large 650-lb (295-kg) capacity10-cu ft (283-L), heavy-duty, 0.25-in. (6.4-mm) thick poly bedWill not dent or rust15x6 tubeless pneumatic tires with turf tread for maximum tractionEasy, hands-free foot pedal dump releaseSteep dump angle for complete emptying A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading. Model comparison chartComparison with similar modelsModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Specifications  7P8Y10P1316YS 17P1821Box capacityHeaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)17 cu ft (0.48 m3)17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)15 cu ft (0.42 m3)14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)Box dimensions Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)58.5 in. (148.6 cm)58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)15.5 in. (39.4 cm)15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBoltedMaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steelTailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-outPneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 plySize13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8Tread designTurfKnobbyTurfTurfTurfTurfTurfTurfRecommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealedGrease fittings on wheelsYesNoneYesYesYesYesYesNoneAxle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)14.25 in. (36.2 cm)14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipDump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degreesMaximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Tractor compatibility and requirementsUtility CartsChart below shows vehicle compatibility.An X indicates cart can be used with the pulling unit.NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.  7P8Y10P1316YS 17P1821EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740RX X     L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180X XXXXXX S240XXX XXXX  LT150, LT160, LT180, LT190, LTR180XXX XX  LX280, LX280AWS, LX289XXX XX  X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394XXX XXX X SST15, SST16, SST18XXX     G110XXXXXX  GT235, GT245XXXXXX  GX255, GX335, GX345, GX355XXXXXX  X500, X520, X530, X534, X540X570, X580, X584, X590XXXXXXX  X465, X475, X485, X495, X575, X585, X595XXXXXXXXX700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758XXXXXXXXFor proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:  Tractor Additional weightL100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180Two 30-lb (14-kg) wheel weights, frontTwo 42-lb (19-kg) suitcase weights, rearS240Two 34-lb (15-kg) wheel weights, front(4) 42-lb (19-kg) suitcase weights, rearLT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, frontTwo 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)LX280, LX280AWS, LX289X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394Two 34-lb (15-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, rearSST15, SST16, SST18One 88-lb (40-kg) weight kit, frontThree 40-lb (18-kg) weights, rearG100Two 50-lb (23-kg) wheel weights, rearTwo 42-lb (19-kg) suitcase weights, rearG110Two 50-lb (23-kg) plastic shell rear wheel weightsGT235, GT245Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearGX255, GX335, GX345, GX355X500, X520, X530, X534, X540X570, X580, X584, X590Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) wheel plastic shell weights, rearX465, X475, X485, X495, X575, X585, X595X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758Four 42-lb (19-kg) suitcase weights, frontTwo 70-lb (32-kg) wheel cast-iron starter weights, rearFour 50-lb (23-kg) cast-iron wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearSix 42-lb (19-kg) suitcase weights, rearOrdering informationPlease contact a local John Deere dealer for availability and pricing information.10P Poly Utility CartOrder number: LPPCT10JDOilite is a trademark of Beemer Precision, Incorporated.

13 Steel Utility Cart Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials, including firewood, lawn debris, dirt, sand, mulch, garden tools, plants, and bushes.Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment.For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck.Welded boxWelded box construction provides maximum reliability:Requires less setup time than the bolted construction.Box sides and bottom are one piece and have rounded corners and no hardware for easy cleaning.Wheels and tiresWheels are mounted on a solid, one-piece axle for durability.Iron/Oilite® wheel bearings with grease fittings provide lubrication for long life.Pneumatic tires offer:Good flotationMinimal rolling resistanceShock absorptionTurf-tread tires are used on the 13 Utility Cart.Deluxe tailgateDeluxe tailgate is hinged for easy emptying and can also be quickly removed without the use of tools.Easy hookup and tilt-dump latchSpring-pin tractor hitchTilt-dump latchA large-diameter hitch pin provides plenty of strength:Fast, easy attachment to the tractor hitchSpring pin to ensure the pin stays in placeThe easy-to-use latch allows tilting the bed for easier unloading:Steep dump angle makes emptying easier.Model comparison chartComparison with similar modelsModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Specifications  7P8Y10P1316YS 17P1821Box capacityHeaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)17 cu ft (0.48 m3)17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)15 cu ft (0.42 m3)14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)Box dimensions Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)58.5 in. (148.6 cm)58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)15.5 in. (39.4 cm)15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBoltedMaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steelTailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-outPneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 plySize13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8Tread designTurfKnobbyTurfTurfTurfTurfTurfTurfRecommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealedGrease fittings on wheelsYesNoneYesYesYesYesYesNoneAxle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)14.25 in. (36.2 cm)14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipDump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degreesMaximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Tractor compatibility and requirementsUtility CartsChart below shows vehicle compatibility.An X indicates cart can be used with the pulling unit.NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.  7P8Y10P1316YS 17P1821EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740RX X     L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180X XXXXXX S240XXX XXXX  LT150, LT160, LT180, LT190, LTR180XXX XX  LX280, LX280AWS, LX289XXX XX  X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394XXX XXX X SST15, SST16, SST18XXX     G110XXXXXX  GT235, GT245XXXXXX  GX255, GX335, GX345, GX355XXXXXX  X500, X520, X530, X534, X540X570, X580, X584, X590XXXXXXX  X465, X475, X485, X495, X575, X585, X595XXXXXXXXX700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758XXXXXXXXFor proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:  Tractor Additional weightL100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180Two 30-lb (14-kg) wheel weights, frontTwo 42-lb (19-kg) suitcase weights, rearS240Two 34-lb (15-kg) wheel weights, front(4) 42-lb (19-kg) suitcase weights, rearLT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, frontTwo 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)LX280, LX280AWS, LX289X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394Two 34-lb (15-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, rearSST15, SST16, SST18One 88-lb (40-kg) weight kit, frontThree 40-lb (18-kg) weights, rearG100Two 50-lb (23-kg) wheel weights, rearTwo 42-lb (19-kg) suitcase weights, rearG110Two 50-lb (23-kg) plastic shell rear wheel weightsGT235, GT245Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearGX255, GX335, GX345, GX355X500, X520, X530, X534, X540X570, X580, X584, X590Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) wheel plastic shell weights, rearX465, X475, X485, X495, X575, X585, X595X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758Four 42-lb (19-kg) suitcase weights, frontTwo 70-lb (32-kg) wheel cast-iron starter weights, rearFour 50-lb (23-kg) cast-iron wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearSix 42-lb (19-kg) suitcase weights, rear Ordering informationPlease contact a local John Deere dealer for availability and pricing information.13 Utility CartOrder number: LPHDC13JDOilite is a trademark of Beemer Precision, Incorporated.

16YS Swivel CartThe 17-cu-ft (0.48-m³), 800-lb (363-kg) capacity or 350 lb (158 kg) when using swivel feature to dump 16YS Swivel Cart is unique in the lineup of John Deere carts in that it can be swiveled 120 degrees to either side for easier unloading. The operator can simply pull up next to where they want to dump the material and swivel the cart, eliminating the need to back up the cart. Key features include:Haul a variety of materials including lawn debris, sand, dirt, mulch, and plants800-lb (363-kg) capacity makes it durable enough for the heavy jobs350 lb (158 kg) when using swivel feature to dumpConvenient foot pedal release for easy dumpingMolded stake pockets for enlarging the bed sizeNOTE: Do not exceed 350 lb (158 kg) weight capacity when using swivel feature to dump. Every owner of a John Deere riding lawn and garden product is a potential customer for a high-quality, affordable utility cart. Utility carts can be used to haul a variety of materials including firewood, lawn debris, sand, dirt, mulch, garden tools, plants, and bushes. Utility carts are designed, painted, and decaled to be compatible with other John Deere equipment. NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Model comparison chartComparison with similar modelsModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Specifications  7P8Y10P1316YS 17P1821Box capacityHeaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)17 cu ft (0.48 m3)17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)15 cu ft (0.42 m3)14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)Box dimensions Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)58.5 in. (148.6 cm)58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)15.5 in. (39.4 cm)15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBoltedMaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steelTailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-outPneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 plySize13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8Tread designTurfKnobbyTurfTurfTurfTurfTurfTurfRecommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealedGrease fittings on wheelsYesNoneYesYesYesYesYesNoneAxle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)14.25 in. (36.2 cm)14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipDump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degreesMaximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Tractor compatibility and requirementsUtility CartsChart below shows vehicle compatibility.An X indicates cart can be used with the pulling unit.NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.  7P8Y10P1316YS 17P1821EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740RX X     L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180X XXXXXX S240XXX XXXX  LT150, LT160, LT180, LT190, LTR180XXX XX  LX280, LX280AWS, LX289XXX XX  X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394XXX XXX X SST15, SST16, SST18XXX     G110XXXXXX  GT235, GT245XXXXXX  GX255, GX335, GX345, GX355XXXXXX  X500, X520, X530, X534, X540X570, X580, X584, X590XXXXXXX  X465, X475, X485, X495, X575, X585, X595XXXXXXXXX700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758XXXXXXXXFor proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:  Tractor Additional weightL100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180Two 30-lb (14-kg) wheel weights, frontTwo 42-lb (19-kg) suitcase weights, rearS240Two 34-lb (15-kg) wheel weights, front(4) 42-lb (19-kg) suitcase weights, rearLT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, frontTwo 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)LX280, LX280AWS, LX289X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394Two 34-lb (15-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, rearSST15, SST16, SST18One 88-lb (40-kg) weight kit, frontThree 40-lb (18-kg) weights, rearG100Two 50-lb (23-kg) wheel weights, rearTwo 42-lb (19-kg) suitcase weights, rearG110Two 50-lb (23-kg) plastic shell rear wheel weightsGT235, GT245Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearGX255, GX335, GX345, GX355X500, X520, X530, X534, X540X570, X580, X584, X590Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) wheel plastic shell weights, rearX465, X475, X485, X495, X575, X585, X595X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758Four 42-lb (19-kg) suitcase weights, frontTwo 70-lb (32-kg) wheel cast-iron starter weights, rearFour 50-lb (23-kg) cast-iron wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearSix 42-lb (19-kg) suitcase weights, rearOrdering informationPlease contact a local John Deere dealer for availability and pricing information. 16YS Swivel CartOrder number: LP68186Oilite is a trademark of Beemer Precision Incorporated.

17P Utility CartEvery owner of a John Deere riding lawn and garden product is a potential user of a high-quality, affordable utility cart.Utility carts can be used to haul a variety of materials:FirewoodLawn debrisSandDirtMulchGarden toolsPlants and bushesUtility carts are designed, painted, and decaled to be compatible with other John Deere equipment. Key features of the 17P Utility Cart:1,000-lb (454-kg), 17-cu ft (0.48-m3) load capacity.Cart has premium molded polypropylene box construction.Polypropylene body will not rust or dent, staying new-looking longer.0.75- x 2-in. (19- x 51-mm) stake pockets are molded in to make addition of side extensions easy.Two vertical 0.75-in. (19-mm) molded channels on each side allow for easy use of dividers to separate the box into two or three compartments.Ribs in box bottom add strength and prevent a shovel from hitting bolts when emptying the cart.Sloped tailgate design makes emptying the box easier; no tailgate to loosen or remove.Styling is compatible with other John Deere equipment.16x6.5 pneumatic tires with turf tread give good flotation, shock absorption, and minimal rolling resistance.Wheels are mounted on a solid one-piece axle.Wheels turn on iron/Oilite® bushings with grease fitting for long life.Spring-loaded dump latch is easy to use.A convenient foot pedal dump release kit, LP48017, which now comes standard on all 10P and 17P carts is available to retrofit existing poly carts. This kit allows the operator to use both hands to lift the cart bed for more natural and efficient unloading.Model comparison chartComparison with similar modelsModelOrder throughBox capacity (heaped)Material thicknessMaximum weight Vehicle compatibility7POrder Zone7 cu ft (0.20 m3)High-density polyethylene (HDPE)**450 lb* (204 kg)EZtrak™, ZTrak™, 100 Series, S240, X300 Series, X500 Series, X700 Series8YOrder Zone8 cu ft (0.22 m3)HDPE**300 lb* (136 kg) (tow)100 Series, S240, X300 Series, X500 Series, X700 Series10POrder Zone10 cu ft (0.28 m3)Polypropylene650 lb* (295 kg)EZtrak, ZTrak, 100 Series, S240, X300 Series, X500 Series, X700 Series13Order Zone13 cu ft (0.37 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series16YSOrder Zone17 cu ft (0.48 m3)Polypropylene800 lb (363 kg), 350 lb (158 kg) when using swivel feature to dump100 Series, S240, X300 Series, X500 Series, X700 Series17POrder Zone17 cu ft (0.48 m3)Polypropylene1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series18Order Zone18 cu ft (0.51 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)100 Series, S240, X300 Series, X500 Series, X700 Series21Order Zone21 cu ft (0.59 m3)16-gauge, 0.06-in. (1.5-mm) steel1,000 lb* (454 kg)X700 Series*The total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The maximum weight for the 21 Utility Cart is rated at 20 mph (32.2 km/h).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Specifications  7P8Y10P1316YS 17P1821Box capacityHeaped7 cu ft (0.20 m3)8 cu ft (0.22 m3)10 cu ft (0.28 m3)13 cu ft (0.37 m3)17 cu ft (0.48 m3)17 cu ft (0.48 m3)18 cu ft (0.51 m3)21 cu ft (0.59 m3)Struck5.6 cu ft (0.16 m3)6.6 cu ft (0.19 m3)8.3 cu ft (0.24 m3)10 cu ft (0.28 m3)15 cu ft (0.42 m3)14 cu ft (0.40 m3)15 cu ft (0.42 m3)15 cu ft (0.42 m3)Maximum weight450 lb* (204 kg)300 lb* (136 kg)650 lb* (295 kg)1,000 lb* (454 kg)800 lb* (363 kg), 350 lb (158 kg) when using swivel feature to dump1,000 lb* (454 kg)1,000 lb* (454 kg)1,000 lb* (454 kg)Box dimensions Width33 in. (84 cm)33.68 in. (85.5 cm)30.3 in. (77 cm)30.25 in. (76.8 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Length45 in. (114 cm)45 in. (114 cm)44.5 in. (113 cm)48 in. (122 cm)58.5 in. (148.6 cm)58.5 in. (148.6 cm)48 in. (122 cm)48 in. (122 cm)Depth10.5 in. (27 cm)10.75 in. (27.3cm)12 in. (30.5 cm)12 in. (30.5 cm)15.5 in. (39.4 cm)15.5 in. (39.4 cm)18 in. (45.7 cm)11 in. (27.9 cm)Box construction MoldedMoldedMoldedWeldedMoldedMoldedWeldedBoltedMaterialHigh-density polyethylene (HDPE)**HDPE** w/UV inhibitorPolypropylene16-gauge, 0.06-in. (1.5-mm) steelPolypropylenePolypropylene16-gauge, 0.06-in. (1.5-mm) steel16-gauge, 0.06-in. (1.5-mm) steelTailgateNone, slopedNone, slopedNone, slopedHingedNone, slopedNone, slopedHingedLift-out/swing-outPneumatic tires 2 ply---2 ply2 ply4 ply4 ply4 ply2 plySize13x4-613x4-615x6.00-615x6.00-616x6.50-816x6.50-816x6.50-820x10.00-8Tread designTurfKnobbyTurfTurfTurfTurfTurfTurfRecommended inflation pressure30 psi (207 kPa)30 psi (207 kPa)14 psi (97 kPa)14 psi (97 kPa)35 psi (241 kPa)28 psi (193 kPa)28 psi (193 kPa)10 psi (70 kPa)Wheel bearingsIron/OiliteNoneIron/OiliteIron/OiliteIron/OiliteIron/OiliteIron/Oilite Ball bearings, double sealedGrease fittings on wheelsYesNoneYesYesYesYesYesNoneAxle diameter0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)0.75 in. (1.905 cm)1 in. (2.54 cm)1 in. (2.54 cm)Ground clearance5.62 in. (14.3 cm)5.25 in. (13.3 cm)6.5 in. (16.5 cm)6.5 in. (16.5 cm)14.25 in. (36.2 cm)14.25 in. (36.2 cm)7 in. (17.8 cm)8.25 in. (21 cm)Width, overall34 in. (86.4 cm)33.68 in. (85.5 cm)38 in. (96.5 cm)38 in. (96.5 cm)39.5 in. (100.3 cm)39.5 in. (100.3 cm)38 in. (96.5 cm)48 in. (122 cm)Hitch pin Pin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipPin/spring clipDump angles55 degrees55 degrees56 degrees31 degrees46 degrees46 degrees35/40 degrees35/40 degreesMaximum tongue weight 100 lb (45.4 kg) 100 lb (45.4 kg) 70 lb (31.75 kg) 100 lb (45.4 kg)50 lb (22 kg) 100 lb (45.4 kg) 100 lb (45.4 kg) 100 lb (45.4 kg)Shipping weight with carton68 lb (31 kg)65 lb (29.5 kg)79 lb (35.8 kg)110 lb (49.9 kg)---105 lb (47.6 kg)170 lb (77.1 kg)240 lb (109 kg)Net weight65 lb (29 kg)55 lb (25 kg)72 lb (32.7 kg)105 lb (47.6 kg)103 lb (47 kg)105 lb (47.6 kg)150 lb (68 kg)220 lb (99.8 kg)*Total weight of the cart and payload. For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg).**HDPE is compression molded for optimum thickness in all areas and maximum durability.Tractor compatibility and requirementsUtility CartsChart below shows vehicle compatibility.An X indicates cart can be used with the pulling unit.NOTE: For proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). The chart shows which utility carts are compatible with the vehicle.  7P8Y10P1316YS 17P1821EZtrak Z225, Z235, Z245, Z255, Z425, Z435, Z445, Z465, Z625, Z645, Z655, Z665ZTrak Z335E, Z355E, Z335M, Z345M, Z345R, Z355R, Z375R, Z525E, Z535M, Z540M, Z535R, Z540R, Z720E, Z735E, Z730M, Z735M, Z740RX X     L100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180X XXXXXX S240XXX XXXX  LT150, LT160, LT180, LT190, LTR180XXX XX  LX280, LX280AWS, LX289XXX XX  X300, X300R, X304, X310, X320, X324, X340, X360,X330, X350, X350R, X354, X370, X380, X384, X390, X394XXX XXX X SST15, SST16, SST18XXX     G110XXXXXX  GT235, GT245XXXXXX  GX255, GX335, GX345, GX355XXXXXX  X500, X520, X530, X534, X540X570, X580, X584, X590XXXXXXX  X465, X475, X485, X495, X575, X585, X595XXXXXXXXX700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758XXXXXXXXFor proper braking and operation, the loaded weight of the cart should never exceed the weight of the tractor, or other towing unit, plus the operator. The loaded weight of any equipment towed by an EZtrak or ZTrak mower should not exceed 250 lb (113.4 kg). See the appropriate vehicle pages for the weight of the vehicle and the mower deck. Additional weight can be added to the vehicle by the following methods:  Tractor Additional weightL100, L108, L110, L111, L118, L120, L130102, 115, 125, 135, 145, 155C, 190C, LA100, LA110, LA120, LA130, LA140, LA150, LA105, LA115, LA125, LA135 LE, LA135 SE, LA145, LA155, LA165, LA175, D100, D105, D110, D120, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180Two 30-lb (14-kg) wheel weights, frontTwo 42-lb (19-kg) suitcase weights, rearS240Two 34-lb (15-kg) wheel weights, front(4) 42-lb (19-kg) suitcase weights, rearLT150, LT160, LT180, LT190, LTR180Two 34-lb (15-kg) wheel weights, frontTwo 31-lb (14.1-kg) plastic shell wheel weights, rear (not for LT190)LX280, LX280AWS, LX289X300, X300R, X304, X310, X320, X324, X340, X360 X330, X350, X350R, X354, X370, X380, X384, X390, X394Two 34-lb (15-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, rearSST15, SST16, SST18One 88-lb (40-kg) weight kit, frontThree 40-lb (18-kg) weights, rearG100Two 50-lb (23-kg) wheel weights, rearTwo 42-lb (19-kg) suitcase weights, rearG110Two 50-lb (23-kg) plastic shell rear wheel weightsGT235, GT245Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearGX255, GX335, GX345, GX355X500, X520, X530, X534, X540X570, X580, X584, X590Two 30-lb (14-kg) wheel weights, frontFour 42-lb (19-kg) suitcase weights, frontFour 42-lb (19-kg) suitcase weights, rearFour 50-lb (23-kg) wheel weights, rearTwo 50-lb (23-kg) wheel plastic shell weights, rearX465, X475, X485, X495, X575, X585, X595X700, X720, X724, X728, X729, X740, X744, X748, X749X710, X730, X734, X738, X739, X750, X754, X758Four 42-lb (19-kg) suitcase weights, frontTwo 70-lb (32-kg) wheel cast-iron starter weights, rearFour 50-lb (23-kg) cast-iron wheel weights, rearTwo 50-lb (23-kg) plastic shell wheel weights, rearSix 42-lb (19-kg) suitcase weights, rearOrdering informationPlease contact a local John Deere dealer for availability and pricing information. 17P Utility CartOrder number: LPPCT17JDOilite is a trademark of Beemer Precision Incorporated.

6.5-bu (229-L) rear bagger6.5-bu (229-L) rear baggerThe hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:Two durable bags with a generous, 6.5-bu (229-L) capacity lift out for emptying and are easy to reinstall.Efficient lower chute provides smooth flow of material to reduce chance of plugging.Standard mower blades can be used for bagging, and high-lift blades are available for very difficult bagging conditions.An air-exhaust duct directs air from the hopper back and toward the ground for clean operation.A convenient bungee-cord fastener makes opening and closing the hopper easy.It is easy to install and remove the hopper, and no tools are required after the initial installation.Pins and spring clips hold the hopper and chute in place; there is nothing left to interfere with other attachments when removed.Loose-knit bags allow more air to flow through to provide complete bag filling in wet and heavy grass conditions.Specifications Capacity6.5 bu (229 L)MaterialHopper topCross-linked high-density polyethylene (HDPE)ChutePolyethyleneBagsPolypropyleneFillingDirectly into bags for emptying on the ground, into a trailer, or into plastic linersTractor compatibility and requirementsThe 6.5-bu (229-L) rear bagger is compatible with:100 Series and S240 Tractors equipped with a 42-in. (107-cm) mower Requirements and/or recommendations:Front ballast is recommended when bagging on hillsides.Use of rear tow-behind attachments that could come in contact with the hopper assembly is not recommended when the hopper assembly is installed.Special mower blades are not required.

Dump from the seat capability for 100 Series Tractors with a 6.5-bu material collection system (MCS)MCS 6The MCS 6 attachment is designed to provide dump from the seat grass collection/expulsion for John Deere 100 Series and S240 Tractors equipped with the 2-bag material collection system (MCS). The MCS attachment eliminates the need to get off of the tractor and empty the bags. As a result, it will increase both efficiency and cleanliness in the mowing process.The aluminum body is lightweight and easy to handle. Conveniently located hand lever and smooth release and latching system are easily accessed from the tractor seat. Because it is engineered specifically for the John Deere Material Collection System, installation is a breeze with simple hand tools.Features:Lightweight aluminum constructionDesigned for full material expulsionEasy access self-latching spring tripped handleShips almost fully assembled (5 minute handle assembly)Installs in seconds (after initial assembly)Benefits:Easy - Convenient Access to dump handle directly from seat Clean - No material handling, no mess Efficient - Unload and go without leaving the seat NOTE: Fits John Deere 100 Series and S240 Tractor 2-bag material collection systems. Not compatible with EZtrak™ Zero-Turn Mowers.Ordering informationPlease contact your local John Deere dealer for availability and pricing information. MCS 6 attachmentOrder number: LP47167

Magnetic hitch pinFits John Deere lawn and garden tow behind attachments.Strong magnetic gripRust resistantEasy to install, secure fitOrdering informationCustomers, please contact your local John Deere dealer for availability and pricing information.Magnetic hitch pinOrder number: LP63768

46-in. (117-cm) Front Blade46-in. (117-cm) Front Blade used on loose materialThe front blade is excellent for pushing light snow or other loose material.The blade is constructed for good performance and long life:Blade surface is curved to roll rather than push material, which requires less power and increased blade capacity.Bolt-on, replaceable cutting edge takes most of the wear to greatly extend the useful life of the blade.For operator convenience, the blade comes with standard equipment for controlling it from the tractor seat:Blade can be angled left, right, or used in the straight-ahead position.Full working rangeFull working rangeThe 46-in. (117-cm) blade can be operated up to 6.5 in. (16.5 cm) above ground level.Floating action is designed into the lift linkage, so the blade is free to follow the contour of the ground.The lift-linkage design makes raising the blade easy.Controlled from tractor seatOperator blade controlFor operator convenience, the blade comes with angling and lift components as standard equipment so it can be controlled from the tractor seat.Front blade lift and angling components are included as standard equipment:Blade can be angled left, right, or used in the straight-ahead position.For 100 Series Tractors, L100 Series Lawn Tractors, G110 Garden Tractors, and S240 Tractor, lift components are provided with the blade so it can be raised and lowered from the tractor seat.Tractor compatibility and requirementsThe 46-in. (117-cm) Front Blade is compatible with:102, 115, 125, 135, 145, 155C, and 190C TractorsL100, L108, L110, L111, L118, L120, and L130 Lawn Tractors, and G110 Garden TractorLA100, LA110, LA120, LA130, LA140, and LA150 TractorsLA105, LA115, LA125, LA135 Limited Edition, LA135 Special Edition, LA145, LA155, LA165, and LA175 TractorsD100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170 TractorsS240 TractorFor model years 2016 and newer, the 46-in. (117-cm) Front Blade (BG20943) has a change to the mounting frame to make it compatible with model year 2016 and newer D100 Series and S240 Tractors:The model years 2016 and newer Front Blades are also backward compatible with model year 2015 and older D100 Series Tractors and the S240 Tractor.The model year 2015 46-in. (117-cm) Front Blade (BG20020) is not compatible with model year 2016 and newer tractors (SN 700,001-).A model year 2016 and newer tractor steering change from a dual drag link system to a single drag link and tie rod design causes interference with older front blades.Attachment D100 Series and S240 TractorsModel yearDescriptionOrder code/attachment number2015 and prior2016 and newer2015 and prior46-in. (117-cm) Front BladeBG20020X 2016 and newer46-in. (117-cm) Front BladeBG20943XXRequirements and/or recommendations:Rear weights and tire chains are required for additional traction.SpecificationsOverall width 46 in. (117 cm)Overall height 14 in. (36 cm)Clearing width 46 in. (117 cm)Angling positions ThreeLift height 6.5 in. (17 cm)Net weight 73 lb (33.1 kg)

LG271 home maintenance kit Typical home maintenance kitHome maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual. The LG271 home maintenance kit includes the following:  QuantityDescription1Engine oil filter2Engine oil quart1Fuel filter1Air filter cartridge1Spark plug

LG266 home maintenance kit Typical home maintenance kitHome maintenance kits are a handy and convenient way for dealers to supply a customer with the maintenance-interval parts as specified in their operator's manual. The LG266 home maintenance kit includes the following:  QuantityDescription1Engine oil filter2Engine oil quart1Fuel filter1Air filter cartridge1Spark plug　

Battery chargerThis fully automatic 1.5-amp battery charger and maintainer safely charges lawn and garden, RV, deep-cycle, and most batteries that require long storage periods. It is particularly useful during winter months when the vehicle is not being used regularly, to ensure the battery stays charged:Automatically determines if the battery is 6- or 12-V and adjusts accordinglyHelps maintain battery in good condition and ensures it is fully chargedPowers on to charge battery and powers off when fully charged'Onboard' feature allows mounting next to the battery on collector, street rods, and other occasional-use vehicles1.5-amp trickle charges small batteries in 2 to 12 hoursMaintains large battery chargesHookup protection guards battery and charger from damage  Includes a choice of battery connection methods:Standard color-coded clips to connect to any batteryCable with quick-disconnect plug and end loops that can be bolted to battery terminals and easily unplugged from charger when not in use

Bucket holder (single)Transporting mulch, plants, or debris is easier with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. For use with any standard 5-gal. (19-L) or 6-gal. (23-L) bucket, the bucket holder is designed to carry up to 70 lb (32 kg) of material.Ordering informationPlease contact your local John Deere dealer for availability and pricing information.Bucket holder (single)Order number: LPJD100

Bucket holder (single)Transporting mulch, plants, or debris is easy with the CargO Mount™ single bucket holder. Just slip the holder bracket into the tractor's rear CargO Mounts. Its all steel construction enables it to carry up to 40 lb (18.1 kg) of material.Ordering informationPlease contact your local John Deere dealer for availability and pricing information.Bucket holder (single)Order number: LPJD100W

5-gal. (19-L) bucketThis black 5-gal. (19-L) bucket perfectly complements the CargO Mount™ single and double bucket holders. It is made of sturdy black plastic.Ordering informationPlease contact your local John Deere dealer for availability and pricing information.Bucket - 5 gal. (19-L)Order number: LPJD400

8-oz (237-mL) Fuel-Protect gasoline stabilizerJohn Deere Fuel-Protect gasoline stabilizer is a unique formula developed to ensure optimum performance and protection year-round: Has corrosion preventersFor lawn and garden equipment and other gasoline-powered vehiclesEnsures quick starts in all two- and four-cycle enginesUse in gasoline, gasoline-oil mixture, and ethanol blendsUse to treat gas cans at each fill-up or use at every fill-up of vehicleKeeps fuel fresh for 12 monthsContains a fuel injector and carburetor cleaner1 oz (29.6 mL) treats 2 gal. (7.6 L)Always use fuel stabilizer in gasoline.Fuel sitting in gas tanks or gas containers for more than 30 days begins to degrade. Also, blended fuels and water in gasoline can form acids that corrode fuel-system components. Protect the investment - use John Deere fuel stabilizer with corrosion preventers and prevent hard starting, surging, lack of power, poor idle, flooding, and will not run or stay running conditions caused by poor-quality fuel. Ask a local John Deere dealer or visit JDParts.Helpful tips:Add fuel stabilizer every time fuel is purchased.Deere gasoline-powered equipment is recommended to run on a minimum of 87 octane gasoline.John Deere Fuel-Protect for gasoline is safe to use in all types of gasoline, including gasoline/oil mixtures and blended fuels containing up to 10 percent ethanol.Use plastic fuel containers to store fuel; ask a local John Deere dealer.For best results, use a spill-proof gas can that automatically seals the gas can vent.Store fuel in a cool, dry, dark place in a sealed fuel can.Fill tank to the top every time the machine is put away.Make sure tank is drained if stored for the winter or treated if left for prolonged periods of time.Please refer to the operator’s manual for additional recommendations and warranty information.Fuel related issues are not considered a warrantable condition as there is no defect in the materials or workmanship of the machine. For more information on fuel, visit John Deere Groundscare.

Wireless connector packagingThe John Deere MowerPlus hour meter connector wirelessly links a model year 2003 and later 100 Series or S240 Lawn Tractor to the MowerPlus app on a mobile device:No tools are needed for installation.Detailed set-up instructions are included.The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.The wireless connector and app work together to offer helpful information.Tractor features available for viewing on the MowerPlus app include:Tractor engine hours automatically synchronized to the appIn-app maintenance reminders and log, based on engine hoursHelp to determine the best time to mowExpert pre-mow optimization tipsMaintenance walk-through instructionsThe operator is able to visit their device’s app store to see new app features as they are added.MowerPlus hour meter connector (BUC10510) for 100 Series and S240 Lawn TractorsHour meter connector (socket end shown)Hour meter connector (pin end shown)The hour meter connector plugs into the back of a 100 Series or S240 Tractor key switch. The tractor’s wiring harness plugs into the other end.Compatibility and requirementsBUC10510 MowerPlus hour meter connector is for model year 2003 and later 100 Series and S240 Tractors, including model series E100, D100, LA100, L100, and S240.MowerPlus hour meter connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:iOS® version 10 or higher is compatible with the hour meter connector.Android™ versions are not compatible with the hour meter connector at this time.NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. 

StarLock blade

StarLock™ blade design42-in. (107-cm) Starlock blade mounting

StarLock™ blade design42-in. (107-cm) Starlock blade mounting

Striping kit brush - top viewStriping kit brush - side viewFeatures and benefitsHomeowners can now achieve results just like the professionalsBrush is easy to adjust for varying mower cutting heightBrush adjusts to varying ground conditions and allows the operator to freely maneuver the vehicle without damaging the turfThe brush striping kit is a very economical and functional attachmentCompatible with the following:42X - 42-in. (107-cm) Side Discharge Mower for S240, X300, X304, X320, and X360 TractorsOrdering informationCustomers, please contact your local John Deere dealer for availability and pricing information. 42X - 42-in. (107-cm) tractor grass groomerOrder number: LP1001

42-in. (107-cm) Mower DeckA complete mower deck can be ordered for replacement, if required.This 42-­in. (107-­cm) Mower Deck comes with two medium­-lift blades for normal cutting and bagging conditions.NOTE: When replacing a model year 2015 or older mower deck, also order GY22387 power take-off (PTO) cable.

Front blowout baffleThe front blowout baffle kit is for the 42-in. (107-cm) Convertible Mower and the 42-in. (107-cm) Edge™ Xtra Mower. It will reduce the amount of blowout when bagging leaves or other dry material.

Mower deck leveling gaugeLeveling gauge allows quick and accurate mower deck leveling and cutting height adjustment.Can be used for:Lawn tractorsLawn and garden tractorsRiding mowersFront mowersCommercial walk-behind mowersZero-turn-radius mowers

42-in. (107-cm) mulch coverThe mulch cover is available as an option.

42-in. (107-cm) mulching attachment (shown on X300 Series mower deck)The mulching attachment for the 42-in. (106.7-cm) mower deck provides excellent performance. This is a high-performance mulching attachment that includes a mulch plug and special mulching blades.Features include:The blades included are designed to work with the StarLock™ blade mounting system used on the 42-in. (106.7-cm) mower deck for 100 Series Tractors, the S240 Tractor, and X300, X304, and X310 Tractors, and also for the 42-in. (106.7-cm) mower deck without the StarLock system used on LT Series Tractors.The special mulching blades included can also be used for side discharging, although the overall cut quality may decline slightly.NOTE: The mulch plug included in the BM21816 mulch kit can also be used on the 42-in. (106.7-cm) mowers with L100 Series Tractors, but the special mulching blades included will not fit the mower spindle; the standard mower blades are designed for mulching and can continue to be used with the mulch plug in place.

Front bumperThe front bumper is an optional attachment for lawn tractors.Benefits include:Additional front-end protectionA more aggressive look for the tractor

Protective cover (medium deluxe)Features include:Wipe-clean reinforced bottom around mower deckEasy-on side handles makes snugging down cover a snapDual reinforced air vents let air circulate and help prevent ballooning in windInterior lining and integrated muffler heat shieldHeavy-duty fabric will not shrink or stretch and is coated for maximum water resistanceEasy-on split back for fast fitting and easy access after installationHandy storage pocket reverses into an attractive storage caseTwo-year warrantyCover provides heavy-duty protection for 100 Series, LT, LX, and S240 Tractors.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.Protective cover (medium deluxe)Order number: LP93617

Protective cover (standard)Features include:Dual vents let air circulate and help prevent ballooning in windElastic shock cord in bottom hem for a quick, custom-like fitCoated fabric for maximum water protectionOne-year warrantyCover provides all-season protection for 100 Series, S240 and Select Series™ X300 Series Tractors.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information. Protective cover (standard)Order number: LP93917

Seat cover, deluxe smallDeluxe thick-cushioned seat cover provides superior protection, all-day riding comfort, and lots of storage:Access to lumbar adjustment controlsLarge-capacity rear-zippered cargo pocketTwo side mesh beverage pocketsElastic cord in bottom hem for a custom fitSmall size fits seats with backrests up to 11 in. (28 cm)Ordering informationContact your local John Deere dealer for availability and pricing information.Seat cover, deluxe small Order number: LP40090

Seat cover, medium size shownSeat cover protects new seats and renews old seats:Four convenient pockets for keeping tools and gear within reachElastic cord in bottom hem for a custom fitSmall size fits seats 11-in. (28-cm) seatOrdering informationContact your local John Deere dealer for availability and pricing information.Seat cover, small Order number: LP22704

AM115838 spark arrester shownAvailable to comply with laws in the state of California, requiring its use under certain conditions.The law basically requires that purchasers of certain products be given written notice that it is illegal to use such machines on forest-covered, brush-covered or grass-covered land (except on watered lawns) without a spark arrester.For further information on this law, consult No. 442.5 of the California Public Resources Code. Also available in other states to comply with local ordinances or customer requests.

15-gal. (57-L) Mounted Sprayer for D100 Series, S240The 15-gal. (57-L) tractor-mounted sprayer is compatible with the S240 and D100 Series Tractors. Convenient mounting, easy maneuverability, and overall versatility make this a perfect choice for a John Deere lawn tractor. It provides an excellent way to apply spray material, including liquid fertilizer, weed killer, tree spray, and de-icer. It comes complete with a 32-in. (81-cm) boom that sprays a 60-in. (152-cm) spray swath. It is also equipped with a 19-ft (5.8-m) hose and a spray wand for spot spraying lawns, shrubs, etc. The fully adjustable brass spray wand tip achieves streams up to 30 ft (9.1 m). It has a custom mounting bracket that utilizes the existing frame holes for no-tools mounting after initial assembly. A recirculation kit is included.Features include:Custom mounting hardware uses existing frame holesMounts in seconds after initial assemblyCompatible with S240 and D100 Series TractorsSHURflo® 100 psi, 2.1 gpm (8 L/min) on-demand diaphragm-type pump is designed for high-hour commercial applications. It can be run dry without damage.The brass-tipped spray wand is included as standard equipment. It is constructed of non-corrosive polypropylene material with Viton® components for multi-use applications.Check valves in boom tips prevent siphoning and dripping, which can cause lawn spottingRecirculation keeps material mixed and movingControl valve directs spray to either the boom or spray wandConvenient electrical hookup includes all necessary wiringRugged translucent yellow tank with molded fill-level indicators (in gal. and L)Ordering informationPlease contact a local John Deere dealer for availability and pricing information.15-gal. (57-L) Mounted Sprayer for D100 Series and S240 TractorsOrder number: LP53283SHURflo is a trademark of SHURflo, LLC.Viton is a trademark DuPont Performance Elastomers.

15-gal. (57-L) Tow-Behind SprayerSprayer comes complete with a boom that sprays 60 in. (152.4 cm) wide. It also has a 12-ft (3.7-m) hose with an adjustable handgun for spot spraying lawns, shrubs, etc.Features include:This sprayer is an excellent choice for spraying small- to moderate-size lawns and shrubs.Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30-ft (9.1-m) high.A 14-in. (35.6-cm) wand on the handgun is standard equipment to give added convenience when spraying trees.NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).This sprayer is especially suited for maintaining residential and small commercial properties:Sprayers provide an excellent way to apply liquid fertilizer.Herbicides and pesticides can be applied along with liquid fertilizer or separately.Advantages of using liquid fertilizer over dry fertilizer:Fertilizer is more readily available to plants.The fertilizer need not be worked into the soil by watering or rain before it will work.Herbicides are more effective when applied with liquid fertilizer.NOTE: Use these sprayers with liquid-base lawn care chemicals only. They are not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.15-gal. (57-L) Tow-Behind SprayerOrder number: LP19478

25-gal. (95-L) Tow-Behind SprayerSprayer comes with a wider boom that sprays a 90 in. (228.6 cm) width. A 15-ft (4.6-m) hose and handgun are provided.Features include:100 psi Shurflo® diaphragm-type pump is designed for high hour commercial applications. It can be run dry without damage.Sprayer is designed to be a good choice for customers with larger lawns with trees to care for or for light commercial spraying.Handgun with adjustable spray pattern is helpful when spraying fruit trees and can be used to spray trees up to 30 ft (9.1 m) in height.The 14-in. (35.6-cm) wand on the handgun is included as standard equipment.NOTE: Sprayers are compatible with competitive tractors (if equipped with a 12-V battery and charging system).This sprayer is especially suited for maintaining residential and small commercial properties.Sprayers provide an excellent way to apply liquid fertilizer.Herbicides and pesticides can be applied along with liquid fertilizer or separately.Advantages of using liquid fertilizer over dry fertilizer:Fertilizer is more readily available to plants.The fertilizer need not be worked into the soil by watering or rain before it will work.Herbicides are more effective when applied with liquid fertilizer.NOTE: Use this sprayer with liquid-based lawn care chemicals only. It is not recommended for wettable powders as no agitating system is provided to prevent particles from separating out.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.25-gal. (95-L) Tow-Behind SprayerOrder number: LP19479SHURflo is a trademark of SHURflo, LLC.

125-lb (57-kg) Pull-Type Spin Spreader John Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:SeedFertilizerInsecticideSaltAll spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.Features include:Positive on/off system (no cables)125-lb (57-kg) capacity corrosion-resistant polyurethane hopper13-in. (33-cm) pneumatic tires for easy rollingEnclosed gearbox (metal gears)Ergonomic dual handle featuring Accu-way™Accu-way even spread pattern adjustmentIncludes screen and coverAccu-way is a trademark of Spyker Spreaders, Inc.Hopper screen and throat openingHopper screen and throat openingHopper screens keep out debris and serve as chunk graters.A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.Dial-A-Matic rate controlDial-A-Matic rate controlThe Dial-A-Matic rate control lets the operator fine-tune the rate application:Dial position locks and unlocks automatically.More than 80 settings provide an accurate application of materials.Ordering informationPlease contact your local John Deere dealer for availability and pricing information.125-lb Pull-Type Spin SpreaderOrder number: LP25353SpinnerSpinnerSpinners are made of high-impact plastic that will not crack or break.Specifications  125-lb (57-kg) Pull-Type Spreader175-lb (79-kg) Pull-Type SpreaderRecommended marketHomeownerHomeownerTypeTow-behindTow-behindBundle numberLP25353 Box capacity125 lb (57 kg), 2.5 cu ft (0.07 m3)175 lb (79 kg), 3.5 cu ft (0.1 m3)Hopper size, in. (cm)14.5x25.25x19.75 (36.8x64.1x50.2)18.5x27.5x21.5 (47x69.9x54.6)No-rust versatilityHopperPolyethylenePolyethyleneHopper screenAluminumAluminumHopper bottom plateStainless steelStainless steelThroat opening, in. (cm)0.81x2.75 (2.1x7)0.81x2.75 (2.1x7)Connecting hardwareStainless steelStainless steelAccurate applicationRate control80-setting Dial-A-Matic knob80-setting Dial-A-Matic knobRate gateNo-stick nylonNo-stick nylonRate gate linkageStainless steelStainless steelEven dispersalSpinner, in. (cm)12 (366)12 (366)Spread pattern, ft (m)10 to 12 (3.1 to 3.7) wide10 to 12 (3.1 to 3.7) wideSpread pattern equalizerAccu-way™Accu-waySpinner shaftZinc-plated steelZinc-plated steelRotary agitatorStainless steelStainless steelMiscellaneousFramePowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steelPowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steelFrame width, in. (cm)18 (45.7)18 (45.7)Drive gearsHeavy-duty die-cast metalHeavy-duty die-cast metalAxle0.63-in. (15.9-cm) solid steel, zinc plated0.63-in. (15.9-cm) solid steel, zinc platedWheels/tires13-in. x 5-in. (33-cm x 13-cm) pneumatic13-in. x 5-in. (33-cm x 13-cm) pneumaticRecommended travel speed3.5 mph (5.6 km/h)3.5 mph (5.6 km/h)WarrantyOne-year limitedOne-year limitedNet weight, lb (kg)29 (13.2)34 (15.4) Accu-way is a trademark of Spyker Spreaders, Inc.

175-lb (79-kg) Pull SpreaderJohn Deere spin spreaders have features and a choice of sizes to satisfy many operators. They are a popular attachment for both homeowner and commercial operators who use them for even distribution of a variety of materials:SeedFertilizerInsecticideSaltAll spreaders have rust-resistant stainless-steel or polyethylene hoppers as well as many stainless-steel components to ensure lasting appearance and long, trouble-free operation.Features include:Positive on/off system (no cables)175-lb (79.4-kg) capacity corrosion-resistant polyurethane hopper13-in. (33-cm) pneumatic tires for easy rollingFully enclosed gear box with metal gears for long lifeAccu-way even spread pattern adjustmentIncludes screen and cover Hopper screen and throat openingHopper screen and throat openingHopper screens keep out debris and serve as chunk graters.A stainless-steel hopper bottom plate/throat opening resists rust and corrosion, which extends the life of the spreader.SpinnerSpinnerSpinners are made of high-impact plastic that will not crack or break.Dial-A-Matic rate controlDial-A-Matic rate controlThe Dial-A-Matic rate control lets the operator fine-tune the rate application:Dial position locks and unlocks automatically.More than 80 settings provide an accurate application of materials.Specifications  125-lb (57-kg) Pull-Type Spreader175-lb (79-kg) Pull-Type SpreaderRecommended marketHomeownerHomeownerTypeTow-behindTow-behindBundle numberLP25353 Box capacity125 lb (57 kg), 2.5 cu ft (0.07 m3)175 lb (79 kg), 3.5 cu ft (0.1 m3)Hopper size, in. (cm)14.5x25.25x19.75 (36.8x64.1x50.2)18.5x27.5x21.5 (47x69.9x54.6)No-rust versatilityHopperPolyethylenePolyethyleneHopper screenAluminumAluminumHopper bottom plateStainless steelStainless steelThroat opening, in. (cm)0.81x2.75 (2.1x7)0.81x2.75 (2.1x7)Connecting hardwareStainless steelStainless steelAccurate applicationRate control80-setting Dial-A-Matic knob80-setting Dial-A-Matic knobRate gateNo-stick nylonNo-stick nylonRate gate linkageStainless steelStainless steelEven dispersalSpinner, in. (cm)12 (366)12 (366)Spread pattern, ft (m)10 to 12 (3.1 to 3.7) wide10 to 12 (3.1 to 3.7) wideSpread pattern equalizerAccu-way™Accu-waySpinner shaftZinc-plated steelZinc-plated steelRotary agitatorStainless steelStainless steelMiscellaneousFramePowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm) 1.13-in. (2.86-cm) tubular steelPowder-coated gloss enamel, 16 ga, 0.6 in. (1.5 mm), 1.25-in. (3.2-cm) tubular steelFrame width, in. (cm)18 (45.7)18 (45.7)Drive gearsHeavy-duty die-cast metalHeavy-duty die-cast metalAxle0.63-in. (15.9-cm) solid steel, zinc plated0.63-in. (15.9-cm) solid steel, zinc platedWheels/tires13-in. x 5-in. (33-cm x 13-cm) pneumatic13-in. x 5-in. (33-cm x 13-cm) pneumaticRecommended travel speed3.5 mph (5.6 km/h)3.5 mph (5.6 km/h)WarrantyOne-year limitedOne-year limitedNet weight, lb (kg)29 (13.2)34 (15.4)Accu-way is a trademark of Spyker Spreaders, Inc.Ordering informationPlease contact your local John Deere dealer for availability and pricing information.175-lb Pull-Type Spin SpreaderOrder number: LP25354

40-in. (102-cm) Tow-Behind Aerator SpreaderThe 40-in. (102-cm) Aerator Spreader can do two jobs at once. It perforates the soil while the calibrated drop-spreader follows with seed, lime, or fertilizer. It can also be used to just aerate the lawn:40-in. (102-cm) width, with up to 2 in. (5.1 cm) of penetration132 steel-tine tips on 8-in. (20-cm) diameter tine starsThree-position, full-sized lift leverDirect spreader drive for consistent performanceAdjustable flow control100-lb (45-kg) spreader capacity4.10/3.5-4 pneumatic tires for easy pulling75-lb (34-kg) capacity weight trayQuality designJohn Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.This implement features legendary John Deere performance and quality.Specifications Width 40 in. (101.6 cm)Aerator depth Up to 2 in. (5.1 cm), two positionsSpreader capacity 100 lb (45 kg)TinesNumber of tips132Diameter8 in. (20.3 cm)MaterialSteelLift adjuster ManualWheels 4.10/3.5-4, pneumaticDrive DirectWeight-tray capacity 100 lb (45 kg)Vehicle compatibility and requirementsRequirements and/or recommendations: tow-behind equipmentRear wheel weights are recommended for additional traction.The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.40-in. (102-cm) Tow-Behind Aerator SpreaderOrder number: LPAS40JD

130-lb (59-kg) Pull-Type Spin Spreader Broadcasts fertilizer, weed control, grass seed or ice melter products while towing behind a riding lawn tractor. 130-lb (59-kg) polyethylene hopper resists rust and is easier to clean. Spread pattern will go up to 12 ft (31 cm) depending on speed and material. New direct rod control with easy to reach handle opens and closes the material gate. Heat treated steel gears with plastic enclosure are protected from corrosive material. Large knobby tread tires roll easily over turf. Two-year warranty.Ordering informationPlease contact your local John Deere dealer for availability and pricing information.130-lb Pull-Type Spin Spreader Order number: LP39087

Broadcast SpreaderThis 175-lb (79-kg) pull-type broadcast spreader is designed for homeowner use:The polyethylene hopper will not dent or rust.All stainless-steel interior hardware, shaft, and agitator help to prevent corrosion.Large pneumatic turf tires ensure a positive drive and smooth operation.High-speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds.Fully enclosed gearbox eliminates downtime and maintenance.Autoflow feature stops the flow of materials - automatically - to prevent burns.Directional spread-pattern control feature provides positive shutoff along sidewalks and driveways.Ordering informationPlease contact your local John Deere dealer for availability and pricing information.175-lb (79-kg) Broadcast SpreaderOrder number: LPBS36JD

Sun canopyThe sun canopy provides protection from the sun's rays and gives the operator some cooling shade during the hot summer days.Quick sun protection for 100 Series Tractors:Slips into CargO Mount™ system ports for quick installationProtects operator from the sun’s raysTough woven polyester construction for strength and durabilityDesigned to fit 100 Series TractorsOrdering informationPlease contact your local John Deere dealer for availability and pricing information.Sun canopyOrder number: LP68122 

40 in. (102-cm) Tow-Behind ThatcheratorThe 40-in. (102-cm) Thatcherator can be used as a dethatcher or an aerator. It can also be used to prepare an area for seed:40-in. (102-cm) width to cover ground fast20 spring-loaded tines for maximum performanceThree-position adjustmentWeight tray to allow increased scratching powerAn 8-in. (20-cm) extension is available to provide widths of 48 in. (122 cm) and 56 in. (142 cm) (Add an extension to one end of Thatcherator to make it 48-in. (122-cm) wide and an extension to both ends for a 56-in. (142-cm) width.)Quality designJohn Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.This implement features legendary John Deere performance and quality.Specifications Width 40 in. (101.6 cm)TinesNumber20, spring-loaded tipsDiameter0.19 in. (0.5 cm)MaterialSteelWeight tray capacity100 lb (45 kg)Lift adjuster Three positionsWheelSize8 in. (20.3 cm)TreadRibMaterialSteelOptional extension 8 in. (20.3 cm)Requirements and/or recommendations: tow-behind equipmentRear wheel weights are recommended for additional traction.The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak Mower not to exceed 250 lb (113 kg).For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.40-in. (102-cm) Tow-Behind ThatcheratorOrder number: LPTA40JD

TerraGrip Traction BeltProtect your driving surface. TerraGrip Traction Belts offer enhanced traction on snow, mud, dirt, wet asphalt, and wet concrete surfaces. They will not scratch or chip concrete, asphalt, or aggregate drives or walkways. The proven reliability of the traditional steel chain attachment system is used and combined with the performance and durability of reinforced rubber slats. The rubber slats wrap around the tire so only rubber touches the driving surface. The result is aggressive traction without the risk of surface damage, that can happen with traditional chains.Features:Rubber slats surround the tire and will not damage driveways or sidewalks.No steel touches the driving surface.No-tools installation utilizes a traditional steel chain attachment system.Traction is improved on all surfaces, especially loose material (snow, dirt, mud, sand, etc.).TerraGrip Traction Belts are approved for John Deere X300, X500 M-T, and X700 Series Tractors.Additional information for 4-wheel-steer tractor models:X700 Series – requires wheel spacer sold separatelyX500 Series – requires wheel stop adjustmentX300 Series – no additional requirements

Tire chain with optional wheel weights on X728 TractorChains are recommended for extra traction when using attachments such as a snow blower or front blade.One pair of chains is included in each bundle.TY15959 tire chains - 20x8-8NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, and E120 Tractors.TY16200 tire chains - 20x10-8 (for some models), 20x10-10NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, and E180 Tractors.TY24327 tire chains - 22x11-10NOTE: For X320, X340, and X360 Tractors.TY15956 tire chains - 23x10.5-12NOTE: For 190C Tractor.TY26227 tire chains - 23x9.5-12, 24x9.5-12NOTE: For X534 Tractor.TY24328 tire chains - 24x12-12NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016- (SN 040,000-) X734 and X754.TY25326 tire chains - 26x10.5-12NOTE: For model year -2015 (SN -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.TY15958 tire chains - 26x12-12NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.

42-in. (107-cm) Lawn SweeperThe 42-in. (107-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.Features include:42-in. (107-cm) clearing width17-bu (599-L) capacity to make fast work of picking up materialConvenient brush-height adjuster has eight positions for easy selection of the optimum sweeping heightHitch has seven positions to match up correctly with a variety of vehiclesLarge 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotationA unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage spaceQuality designJohn Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.This implement features legendary John Deere performance and quality.Specifications Brush heightSweeping conditionsGround level to 1 in. (25 mm) aboveSmooth surfaces - driveways, parking lots, andsidewalks1 in. (25 mm) to 2 in. (50 mm)Mowed lawns under normal conditions, or lightleaves2 in. (50 mm) to 3 in. (75 mm)High grass, heavy leaves, or heavy grass clippings  Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.42-in. (107-cm) Tow-Behind Lawn SweeperOrder number: LPSTS42JD

44-in. (112-cm) Lawn SweeperThe 44-in. (112-cm) Lawn Sweeper offers great performance and hauls an incredible 17 bu (599 L) of material. Its design gives superior brush-to-ground contact to prevent skipping and provide maximum performance for a clean path the first time through.Features include:44-in. (112-cm) clearing width17-bu (599-L) capacity to make fast work of picking up materialConvenient brush-height adjuster has eight positions for easy selection of the optimum sweeping heightHitch has seven positions to match up correctly with a variety of vehiclesLarge 12-in. (305-mm) x 3-in. (76-mm) wheels with bar tread have good gripping action to ensure positive brush rotationA unique storage feature allows the sweeper to collapse and be stored vertically to minimize storage spaceQuality designJohn Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.This implement features legendary John Deere performance and quality.Specifications Brush heightSweeping conditionsGround level to 1 in. (25 mm) aboveSmooth surfaces - driveways, parking lots, and sidewalks1 in. (25 mm) to 2 in. (50 mm)Mowed lawns under normal conditions, or light leaves2 in. (50 mm) to 3 in. (75 mm)High grass, heavy leaves, or heavy grass clippings  Ordering informationPlease contact your local John Deere dealer for availability and pricing information.44-in. (112-cm) Tow-Behind Lawn SweeperOrder number: LP49038

Dethatcher kit for sweeperThis John Deere dethatcher kit has two rows of individually flexing tines that gently but effectively remove grass clippings, leaves, and other lawn debris from your lawn. The kit easily attaches to the front of John Deere's 42-in. (107-cm) Lawn Sweeper (LPSTS42JD) to add thatch pickup to the sweeper's cleaning abilities. The dethatcher does not need to be removed to resume regular sweeping use. Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information. Dethatcher kit for sweeperOrder number: LP42108

Multi ToolThe Multi Tool includes one platform and two separate attachments, saving space and money. Includes 40-in. (101.6-cm) weight tray - capable of holding up to 100 lb (45.4 kg) of weightIncludes pre-assembled core aerator - reduces soil compaction allowing air, water, and fertilizer to the grass rootsIncludes dethatcher - removes unwanted debris from the top of the soil to allow nutrients to reach the grass rootsElongated handle - makes it easier to raise into transport or lower for useSpring assisted lever - makes changing the attachments quick and easy John Deere has combined the best lawn tools into one package.Two-year warranty. Ordering informationPlease contact your local John Deere dealer for availability and pricing information. Multi ToolOrder number: LP39089

36-in. (91-cm) Tow-Behind Lawn RollerThe Lawn Roller packs down sod, seed, and mole ridges. Its tough polyethylene drum does not dent or rust. The drum's rounded ends do not gouge the lawn or make ruts:36-in. (91-cm) wide polyethylene drum390-lb (177-kg) weight for excellent levelingRounded end caps to reduce gouging42-U.S. gal. (159-L) capacityLong-lasting Nylatron® bearingsNylatron is a trademark of QUADRANT AG or its affiliates or licensors.Quality designJohn Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.This implement features legendary John Deere performance and quality.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.36-in. (91-cm) Tow-Behind Lawn RollerOrder number: LPPRT36JDSpecifications Width 36 in. (91 cm)RollerSize36 in. x 18 in. (91 cm x 46 cm)Capacity42 U.S. gal. (159 L)Weight (filled)390 lb (176.4 kg)Drum/end-cap material High-density polyethylene (HDPE)Bearings Nylatron Requirements and/or recommendations: tow-behind equipmentRear wheel weights are recommended for additional traction.The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower or Residential ZTrak™ Mower.The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

40-in. (102-cm) Tow-Behind Plug AeratorThe 40-in. (102-cm) Plug Aerator removes plugs of soil up to 3-in. (7.6-cm) deep to allow penetration of air, water, and nutrients. It also helps relieve soil compaction:40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetrationThree-position lift handle for 2-in. (5-cm) or 3-in. (7.6-cm) plug lengths28 carbonized, 16-gauge, 0.06-in. (1.5-mm) steel, individually serviceable plugging tines1-in. (2.5-cm) diameter high-carbon steel-tine shaft4.10/3.50-4 pneumatic tires for easy pulling175-lb (79-kg) capacity weight trayQuality designJohn Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.This implement features legendary John Deere performance and quality.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.40-in. (102-cm) Tow-Behind Plug AeratorOrder number: LPPA40JDSpecifications Width 40 in. (101.6 cm)Aerator depth Up to 3 in. (7.6 cm)TinesNumber of tips28Spacing6 in. (15.2 cm) apartMaterial Carbonized, 16-gauge, 0.6-in. (1.5-mm) steelLift adjuster Manual, three positionWheels 4.10/3.5-4, pneumaticWeight-tray capacity 175 lb (79.4 kg)Vehicle compatibility and requirementsRequirements and/or recommendations: tow-behind equipmentRear wheel weights are recommended for additional traction.The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mowers, or Residential ZTrak™ Mowers.The loaded weight of the utility cart not to exceed the weight of the vehicle and operator.The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.

40-in. (102-cm) Tow-Behind Spiker AeratorThe 40-in. (102-cm) Spiker Aerator penetrates soil, allowing air, water, and nutrients to enter the lawn. It also relieves soil compaction:40-in. (102-cm) width with up to 2 in. (5 cm) of penetration10-in. (25-cm) diameter steel-tine stars132 steel-tine tips on 11 spike wheels3.5-in. (9-cm) spike-wheel spacingFull-sized lift lever4.10/3.5-4 pneumatic tires for easy pulling100-lb (45-kg) capacity weight tray 40-in. (102-cm) width with up to 3 in. (7.6 cm) of penetrationQuality designJohn Deere tow-behind lawn care tools are compatible with all John Deere lawn and garden tractors, as well as competitive tractors.This implement features legendary John Deere performance and quality.Specifications Width 40 in. (101.6 cm)Aerator depth Up to 2 in. (5.1 cm)TinesNumber of tips132Diameter10 in. (25.4 cm)Spacing3.5 in. (8.9 cm) apartMaterialSteelLift adjuster ManualWheels 4.10/3.5-4, pneumaticWeight tray capacity 100 lb (45 kg)Requirements and/or recommendations: tow-behind equipmentRear wheel weights are recommended for additional traction.The 48-in. (122-cm) Tow-Behind Plug Aerator is not recommended for Select Series™ X300s, D100, LA100, 100, or L100 Series, 100 Series, LT, LTR, LX Lawn Tractors, EZtrak™ Mower, or Residential ZTrak™ Mower.The loaded weight of the utility cart not to exceed the weight of the vehicle and operator. The loaded weight of any attachment towed by an EZtrak or Residential ZTrak not to exceed 250 lb (113 kg).For EZtraks and Residential ZTraks, only the 7P Utility Cart, 10P Utility Cart, or 42-in. (107-cm) Lawn Sweeper are recommended for towing.Ordering informationCustomers, please contact your local John Deere dealer for availability and pricing information.40-in. (102-cm) Tow-Behind Spiker AeratorOrder number: LPSAT40JD

Snow cab shown on a D100 Series TractorThe roomy steel-frame cab shields the operator against snow, rain, sun, and wind to make snow removal a more pleasant experience.The snow cab is compatible with all 100 Series and S240 Tractors:D100, D105, D110, D120, D125, D130, D140, D150, D155, D160, D170, E100, E110, E120, E130, E140, E150, E160, E170, E180, and S240Zippered-access hole for control armInside mesh storage pocketRoomy steel frame cab shields against snow, rain, sun and wind.Key features include:Double-zippered access hole for control maneuverabilityInterior mesh pockets to hold accessoriesSuper-clear vinyl windows are cold-crack tested to -4°F (-20°C)Internal non-scratch magnets to ensure a custom fit - no tool necessaryZippered doors have a snap-lock system to hold them openRear locking panel holds enclosure tight against tractor frameAssembles and installs with standard hand toolsOrdering informationPlease contact your local John Deere dealer for availability and pricing information.Snow cabOrder number: LP68121

34-lb (15.4-kg) front wheel weightA durable cast-iron weight can be mounted to each front wheel.These weights are recommended for use when operating on slopes, especially when the tractor is equipped with a rear grass bagger or other rear-mounted equipment.Each weight requires BM17978 mounting hardware.

42-lb (19-kg) Quik-Tatch weight42-lb (19-kg) weights and optional mounting bracketThe 42-lb (19-kg) Quik-Tatch can be used to counterbalance a heavy front or rear attachment and/or provide greater stability, especially when operating on hills.This weight is constructed of cast iron and weighs approximately 42 lb (19 kg).Some vehicles have built-in front and/or rear weight brackets to hang the weights on; others require a weight bracket that must be ordered separately.X400/X500 Heavy-Duty Garden Tractors and X700 Series Tractors require the following parts when weights are installed on the front of the tractor:One  M147986 weight retaining rod (Parts)Two  M40461 spring clip (Parts)

Rear weight bracket shown with two 42-lb (19.1-kg) weightsRear weight bracketThe rear suitcase weight provides extra ballast that is needed to reduce wheel slippage and increase snow-removal capability.

Rear weight bracket (BG20022 shown)Rear weight bracket shown with two 42-lb (19.1-kg) weightsThe rear weight bracket provides a tractor-mounted bracket for hanging two weights:BG20627 replaces BG20022 and BG20499 rear weight brackets.Clearance is provided for the carbon canister that is required on tractors sold in California.BG20627 can be used in all applications where BG20022 and BG20499 were used.

30-lb (13.6-kg) front wheel-weight shownHardware is required for installing each front-wheel weight.Requirements:Mounting may require drilling two holes in the wheel rim.BM17978 mounting hardware kit is required for each weight.NOTE: Front-wheel weights are not available for special edition tractors because the styled front-wheel design does not have appropriate holes for mounting the wheel weights and no adapter is available.