Equipment Image
John Deere913 V-Ripper
Agriculture
Equipment Description
- Adjustable standard spacing prevents side movement
- V-pattern frame promotes leading-edge shattering
- LaserRip™ Extreme points
- Heavy-duty steel ripper points
| Tool configuration - Type | V-ripper |
|---|---|
| Depth control - Option 1 | Intergral units are controlled by tractor, rockshaft, and gauge wheels |
| Hitch - Options | Integral |
| Hitch - Three-point hitch requirements | Category 2 or 3N with Quik Coupler Category 3N without Quik Coupler |
| Key Specs - Spacings | 50.8 cm 20 in. 63.5 cm 25 in. 76.2 cm 30 in. |
| Transport width - Option 3 | 2.1 m 7 ft |
| Key Specs - Operating depth | Maximum 58.4 cm 23 in. |
| Working width - Option 3 | 3.8 m 12.5 ft |
| Tool configuration - Option 1 | Standard: 3, spacing: 50.8 cm 20 in. |
| Transport width - Option 1 | 2.1 m 7 ft |
| Tool configuration - Option 3 | Standard: 3, spacing: 76.2 cm 30 in. |
| Standard options - Spacings | 50.8 cm 20 in. 63.5 cm 25 in. 76.2 cm 30 in. |
| Key Specs - Working width | Option 1: 2.5 m 8.33 ft Option 2: 3.2 m 10.42 ft Option 3: 3.8 m 12.5 ft |
| Key Specs - Transport width | Option 1: 2.1 m 7 ft Option 2: 2.1 m Option 3: 2.1 m |
| Working width - Option 2 | 3.2 m 10.42 ft |
| Standard options - Option 1 | Trip force 5,443 kg 12,000 lb Standard type Straight or parabolic with wear shin Shear-bolt |
| Tool configuration - Option 2 | Standard: 3, spacing: 63.5 cm 25 in. |
| Operating depth - Maximum | 58.4 cm 23 in. |
| Standard options - Option 2 | Trip force 2,540 kg 5,600 lb Standard type Straight with wear shin or parabolic Safety-trip |
| Transport width - Option 2 | 2.1 m 7 ft |
| Standard options - Option 3 | Trip force 2,404 kg 5,300 lb Standard type Straight with wear shin or parabolic Cushion-trip |
| Standard options - Option 4 | Trip force 1,451.5 to 2,404 kg 3,200 to 5,300 lb Standard type Parabolic Spring-reset rock standard |
| Working width - Option 1 | 2.5 m 8.33 ft |
Featured Content
913 V-Ripper
The frame design of the 913 V-Ripper positions the standards in a V pattern:
- Promotes leading-edge shattering of the center shank and material flow through the machine
The 127-mm x 178-mm (5-in. x 7-in.) cross-section frame has 10-mm (3/8-in.) thick walls:
- Provides strength to handle tractors of up to 150 power take-off (PTO) horsepower
- Same frame-size tubing as non-expandable 915 V-Ripper
- Parking stands are included in base equipment
Low and high positions on 3-point mast
3-point hitch hookup is for Category 2 or 3N tractors.
The integral hitch can be set to two positions:
- 1 = Low position
Gives maximum transport clearance and allows ripping to approximately 508 mm (20 in.) deep with the 838-mm (33-in.) standards. - 2 = High position
Enables ripping to a maximum depth of 584 mm (23 in.) deep with the 838-mm (33-in.) standards.
Soil probe
The soil probe helps operators to determine the proper operating depth of their ripper points,
38 mm (1.5 in.) below the bottom of the compaction layer.
The probe allows obtaining the maximum amount of soil fracturing from the entire family of John Deere ripper points. Marked in 51-mm (2-in.) increments from 254 mm to 559 mm (10 in. to 22 in.), the probe provides accurate feedback of compaction layer depth.
It is stored on the mainframe of the ripper for convenient access. The operator’s manual explains the proper use of the soil probe.
Financing options for all your purchases
From equipment purchases as well as parts and service
John Deere Financing Options
Loans & Leases
for new and used equipment
Flexible Terms
for new and used equipment
Heritage Tractor makes it easy to get the equipment you need with flexible financing options through John Deere Financial. Whether you’re purchasing new or used equipment, adding attachments, or planning for parts and service, our team can help you explore loan and lease solutions designed to match your operation and cash flow—so you can keep working without overextending your budget.