Equipment Image
John DeereDH52F Series Folding Offset Disks
Agriculture
Equipment Description
- Adjustable disk blade scrapers
- Disk blades (notched or smooth) available in two sizes
- Rear hitch for attaching additional implement
- Oil bath tapered roller bearings minimize maintenance
| Tires - Type | Implement - Quantity of 4 |
|---|---|
| Transport - Wheel hub bearings | Dual tapered roller bearings |
| Disk gangs - Front angle | 2 Positions |
| Working - Maximum penetration | 22.9 cm 9 in. |
| Available blade sizes - Blade option one | 660x7.9 mm 26x0.312 in. |
| Disk blades - Spacing | 26.7 cm 10.5 in. |
| Lighting and safety - Safety tow chain | Yes |
| Available blade sizes - Blade option two | 711x7.9 mm 28x0.312 in. |
| Disk blades - Quantity | 57 |
| Transport - Width | 3.8 m 12.5 ft |
| Transport - Ground clearance with base blades | 20.3 cm 8 in. |
| Disk gangs - Scrapers | Adjustable |
| Tractor requirements - Recommended drawbar hp range | 149.1-193.9 kW 200-260 hp |
| Hitch - Front hitch type | Spade |
| Weight - Weight per disk blade | 124 kg 273 lb |
| Disk gangs - Rear angle | 2 Positions |
| Working - Approximate working width | 7.3 m 24 ft |
| Warranty - Time period | 1 year |
| Disk blades - Blade concavity | Standard: high Optional: low |
| Tractor requirements - Recommended PTO hp range | 175-228 kW 235-306 hp |
| Disk gangs - Axle size | 4.1 cm 1.625 in. or 5.4 cm 2.125 in. |
| Tires - Size | 12.5L x 15 10 ply in. |
| Lighting and safety - Markings | SMV |
| Lighting and safety - Lights | Yes |
| Frame - Tube size | 15.2x15.2x0.95 cm 6x6x0.375 in. |
| Weight - Net | 6804 kg 15000 lb |
| Set-up time - Labor hours | 4-6 for two people |
| Disk gangs - Axle material | Round heat treated alloy steel threaded on both ends |
| Disk gangs - Bearing standards | Welded, Reinforced |
| Frame - Type | Single offset folding |
| Disk gangs - Bearing wear plates | Standard |
| Frame - Duty | Medium |
| Disk gangs - Bearing type | Oil bath tapered roller |
| Tires - Wheel hub type | 8 Bolt |
| Disk blades - Type | Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional |
Featured List
- Working Width: 21 ft. (6.4 m) folding
- Hitch: Cast link
- PTO HP: 212 – 259 hp (158.1 – 193 kW)
Featured Content
Clevis hitch makes hookup easy
Clevis hitch is built strong for tough jobs
The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.
Allows operator to pull an additional implement
A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag.
Transport locks secure disk wings cylinder
Transport locks are standard, ensuring disk wings are in secure transport mode.
Control arms level in ground and during transport
Easy to set for desired soil condition
Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.
Notched disk blades
Smooth disk blades
Disk blades are available in 66-cm or 71-cm (26-in. or 28-in.) diameters. Disk blades are available in smooth blades, notched blades, or a combination of front notched blades and rear smooth blades to meet a variety of needs.
For superior penetration in tough soil conditions, weight per blade ranges from 108.9 kg to 154.7 kg (240 lb to 341 lb) depending on the offset disk series and model.
Scrapers clean disk blades
Scrapers work great in wet and sticky soils
Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.
Keeping gangs tightened increases wear life
Gang nut wrenches are always there when needed
End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.
Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.
Minimal maintenance increases work hours
Sealed with industrial-grade seals
Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.
Financing options for all your purchases
From equipment purchases as well as parts and service
John Deere Financing Options
Loans & Leases
for new and used equipment
Flexible Terms
for new and used equipment
Heritage Tractor makes it easy to get the equipment you need with flexible financing options through John Deere Financial. Whether you’re purchasing new or used equipment, adding attachments, or planning for parts and service, our team can help you explore loan and lease solutions designed to match your operation and cash flow—so you can keep working without overextending your budget.