S220
Lawn Tractor with 42-in. Deck
200-series
- 22 HP* Cyclonic V-Twin Engine
- 42-in. (107-cm) Accel Deep™ Deck, compatible with optional MulchControl™ kit
- Comfortable 15-in (38-cm) open-back seat
- Side-by-side forward and reverse pedals
- 3-year/200-hour bumper-to-bumper warranty
PLUS ADDITIONAL CHARGES
Apply For FinancingBuy OnlineMaintenance Plans
View Product Brochure
60 Day Promise
Features
Cyclonic V-twin engine is smooth running and powerful
The 22-hp (16.4-kW) V-twin engine used in the S220 Tractor provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
- V-twin cylinder design for greater torque, lower vibration, and improved sound quality
- Large, 44.2-cu in. (724-cc) displacement
- Plenty of torque helps to get the job done fast.
- Large displacement engine increases the ability to get an even cut without mowing a second time.
- Camshaft and carburetor designs create the optimum torque rise for rapid response to varying load conditions.
- Electronic ignition for fast starts
- Cast-iron sleeves for longer engine life
- Overhead valves for excellent power and fuel economy
- Full-pressure lubrication and oil filter for keeping the oil cleaner for a long engine life and extending the time between oil changes; full-pressure lubrication is also more effective when operating the tractor on an incline
- Excellent serviceability with easily replaced air filter, fuel filter, and oil filter and a convenient oil-drain hose to make draining the oil easy and clean
Cyclonic air filter
Cyclonic air-management system removes larger particles of dirt before they reach the air filter for reduced filter maintenance and longer engine life:
- Cyclonic design ejects large dirt particles before they contact the filter.
- Large, high-quality dry-type paper element air filter thoroughly cleans engine intake air.
- The cover over the air filter is easily removed with two knobs for cleaning or replacement of the filter.
Serviceability
The engine oil check and fill tube are conveniently located for easy access. An oil drain hose makes draining oil easy and clean.
The replaceable oil filter and fuel filter are easy to access and change to minimize service time and cost.
Two debris inspection ports help ensure clean engine fins for optimum cooling. Bolts to open them are conveniently located under the air filter cover.
Flywheel alternator
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
- 14-amp charging capacity
- Regulated to keep the battery at full charge without risk of overcharging
Fuel tank
- The capacity is 2.4 U.S. gal. (9.1 L).
- The fuel filler opening is conveniently located under the seat.
- Filling the tank without spilling is easy.
- A tethered fuel tank cap is more convenient.
- The sealed fuel cap helps keep vapors inside the tank.
42-in. (107-cm) Accel Deep™ (42A) Mower Deck cuts clean and is versatile
The 42-in. (107-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds or in tall grass:
- 4.97-in. (12.6-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
- Optional MulchControl™ system provides superior mulching performance and versatility
- Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
- Mower deck suspended from the vehicle for a smooth and level cut
- Adjustable mower wheels, positioned just above ground level, help reduce scalping
- 0.25-in. (6.4-mm) cut-height increments allow the mower to be set at the desired cut height
- Compatible with efficient 6.5-bu (229-L) two-bag material collection system
Excellent cut quality
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
- Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
- Helps maintain excellent cut quality at faster mowing speeds
- Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
- Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.
Productivity - gets the job done fast
Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of recutting so more power is available to process incoming grass:
- Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds
Large discharge opening is both high and wide to handle more material:
- Gives a smooth, even discharge of clippings at all mowing speeds
- Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
- Cut-and-throw chute has a large, optimized inlet which aids in collecting material by using airflow from the large deck opening
Cleanliness - for the mower and the operator
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
- There are few places to catch and hold material on top and underneath the deck.
- Top of deck stays cleaner, reducing time and effort needed for cleaning and service
- Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
- Less need to clean and remove buildup of material from underside deck
- The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck
- Limited amount of material to drift onto the operator and mower deck
- Even flow of material discharged out the chute, less recutting results in larger pieces that are less likely to end up on the operator
- Mulching prevents the discharge of material completely and MulchControl makes mulching a practical solution for most mowing situations.
Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:
- The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
A wash port is provided to make cleaning the underside of the mower deck easy.
- Hose connector is included with the mower deck.
Superior durability is designed in
The 42A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
- Ribs in the deck shell add strength where it is needed.
- The 42A has a 16 percent heavier overall weight than the Edge™ Xtra 42-in. (107-cm) Mower Deck.
Mower wheels are double captured:
- Provides greater strength and durability for longer, trouble-free life.
- Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.
Low-tension belt-drive design reduces the side load on the engines lower bearing and mower deck bearings for longer life.
Rolled outer edge of the deck provides extra strength and protection.
Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
Mower blades
High-lift bagging blades are included with the bagger chute. They provide optimum performance when bagging in difficult conditions, such as when the grass is moist, dense, or long:
- High-lift bagging blades also work well when side discharging material.
Mulching blades are included with the optional MulchControl system. They can be used for mulching, side discharging, and bagging in most conditions.
Mower blade use chart
Mode(s) of operation | Mower blade |
Side discharging mode only | Side-discharge blade (shipped with mower) |
Bagging mode only | Bagging blade (shipped with rear bagger) |
Mulching mode only | Mulching blade (shipped with MulchControl) |
Side discharge and mulching | Mulching blade (shipped with MulchControl) |
Side discharge and bagging | Bagging blade (shipped with rear bagger) |
Side discharge, mulching, and bagging | Mulching blade (shipped with MulchControl) |
Versatility - easy to change between side discharge, mulch, and bagging modes
The 42A Mower Deck is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:
- With an optional MulchControl system installed (along with the special mulching blades), changing from side discharging to mulching or vice versa is done with the simple flip of a lever or push of an electric switch.
- The cut-and-throw rear bagger can be used with MulchControl by removing the rear MulchControl baffle (A) before installing the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.
6.5-bu (229-L) rear bagger
An optional 6.5-bu (229-L) cut-and-throw rear bagger material collection system (MCS) is available and comes with bagging blades. Special blades are not required but they can be installed for enhanced performance.
The bagger provides an efficient means of collecting grass clippings and leaves. It can be set up without tools in minutes and has easy-to-empty bags.
MulchControl™ system provides superior mulching performance and rapid conversion
The optional MulchControl system makes mulching more practical for many mowing situations because it not only does an excellent job of mulching, but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
- Creates a beautiful looking lawn
- Smaller grass clippings disappear into the lawn canopy
- Reduces fertilizer needs
- Grass clippings are not blown onto the operator, driveways, or flower beds
- No need to dispose of bags of clippings
How MulchControl works
MulchControl is an innovative, simple design that is easy to use and maintain:
- The MulchControl system includes an adjustable MulchControl baffle near the discharge chute and fixed baffles to control the flow of material under the deck.
- The MulchControl handle is on top of the mower deck and is used to open and close the MulchControl baffle.
- When the MulchControl baffle is open, most of the material flows freely out the discharge deflector or into a material collection system.
- When the MulchControl baffle is closed, material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl is well-suited to the following mowing situations:
- For operators who usually mulch, but side discharge when grass gets too long
- For operators who usually side discharge, but would like to close the chute to control clippings in some areas
- For operators who always mulch a main lawn, but often side discharge secondary lawns
- For operators who collect clippings but want to go farther before emptying the material collection system
MulchControl puts the operator in control of the clippings.
MulchControl limitations
While in the side-discharge mode, MulchControl still mulches about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
- When cutting strong southern grasses, such as Zoysia and Bermuda
- When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
- When optimum bagging and lawn cleanup is desired
When bagging with MulchControl on a 48A mower deck, the MulchControl baffle can be opened or closed with the Power Flow™ blower installed. The Power Flow blower runs without material when the baffle is closed.
When bagging with MulchControl on a 42A mower deck, the cut-and-throw rear bagger can be used with the MulchControl blades. However, the rear MulchControl baffle (A) needs to be removed to install the bagger chute. The baffle is held in place with two carriage bolts. To return to mulching, the chute needs to be removed and the baffle replaced.
MulchControl compatibility
Each MulchControl system is an optional field-installed attachment and includes everything needed for handle actuation: baffles, handle, and mulch blades.
Attachment |
Description |
Applications |
42-in. (107-cm) Accel Deep MulchControl |
S220 and model 2021 and newer S240 Lawn Tractors |
|
48-in. (122-cm) Accel Deep MulchControl |
S240 Lawn Tractor, model year 2016 and newer X300 and X500 Series Tractors, Z300 and Z500 Series ZTrak™ Mowers |
Three-year or 200-hour bumper-to-bumper warranty is standard
An exclusive 3-year or 200-hour (whichever comes first), single-source, bumper-to-bumper warranty* is standard for all John Deere 200 Series Tractors.
- The warranty is hassle free, with one company handling all of the paperwork.
- Premium features of 200 Series Tractors allow for this longer warranty period, with more coverage than comparable tractors.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
Hydrostatic/automatic drive transmission gives an infinite choice of ground speeds
A Kanzaki® Tuff Torq® hydrostatic transmission gives an infinite choice of speeds and makes changing the direction of travel easy.
Side-by-side foot pedals control the speed and direction of travel:
- Automotive-type accelerator controls ensure easy operation.
- The operator can change direction without lifting foot off the platform.
- A large pedal surface gives superior operator comfort.
Appropriate transmissions are used in each tractor model, depending on rear tire size and tractor performance requirements, to ensure excellent performance and reliability:
-
Tuff Torq TLT200 – S220
-
Tuff Torq K46 – S240
Kanzaki and Tuff Torq are trademarks of Kanzaki Kokyukoki Mfg. Co., Ltd.
Snow removal is a strength of lawn tractors
An advantage of lawn tractors is their ability to use equipment for snow removal. Lawn tractor owners can add a John Deere snow blower or front blade to make quick work of moving snow whenever the need arises. Weather enclosure and tire-chain attachments add comfort and performance.
Equipment available for snow removal includes:
- 44-in. (112-cm) Snow Blower
- 46-in. (117-cm) Front Blade
- Tire chains or TerraGrip traction belts
- Weather enclosure
- Weights
Full-length, welded-steel frame and cast-iron front axle for reliability
The solid one-piece frame is constructed of 12-gauge, 0.105-in. (2.7-mm) steel:
- Full-length robotically welded frame design has high-strength steel rails for added strength and long life.
- One-piece steel fender deck is bolted to the frame.
Cast-iron front axle does not bend
The front axle is constructed of solid cast iron that will not bend:
- Automotive-like steering system with sector-and-pinion steering gears and single drag link and tie rod provides a very strong, low-effort, and tight-turning system.
- Grease fittings allow regular lubrication to help maintain easy steering and minimize wear.
- Large, 0.75-in. (19-mm) diameter wheel spindles provide excellent durability.
Front bumper protects the tractor
The front bumper provides additional front-end protection and attractive, bold style.
CargO Mount™ system makes installation of rear bagger and other attachments easy
The CargO Mount system is a combination of front and rear mounting points that provide convenient and easy installation of the rear bagger and other attachments.
Operator station designed for operator comfort and convenience
The operator station is designed for operator comfort and easy operation:
- Controls are positioned where they are easy to reach and use to control the tractor.
- The steering wheel is positioned and angled to give the operator plenty of room and steering comfort.
- The seat is positioned to provide the most comfortable operator position
Controls are easy to see and use:
- Large, three-spoke steering wheel for greater operator comfort and control
- Ignition switch is on the dash for starting ease
Wide footrest areas with non-slip, anti-vibration floor mats are provided for operator comfort:
- The wide footrest makes it easier to step over the mower deck while entering or exiting the seat.
- Debris-removing channels help keep the footrest area clean and dry.
Operator comfort is enhanced with a 15-in. (38.1-cm) high-back, two-piece seat with an open back:
- Especially helpful when operating the tractor for extended periods of time
- Easily adjusted forward or rearward while in the seat
- Seat travel of 5.5 in. (14 cm) and 10 different positions to adjust for operator height
Beverage holder and storage compartment, with cover, are located on the right-side fender, conveniently located and easy to use.
Instruments and controls are easy to find and convenient to use
Instruments and controls
Three-spoke steering wheel for greater operator comfort and control:
- Large, 12-in. (30.5-cm) diameter steering wheel gives good comfort and control.
The contoured dash has clean, attractive styling:
- Controls are color coded and labeled for easy identification by the operator.
- Controls are logically placed and easy to reach.
- The hour meter makes it easy to tell when oil changes and other maintenance should be performed.
- The ignition switch is on the dash for starting ease.
- Functional design of the controls provides good appearance and a comfortable feel.
The engine speed lever and choke control lever are separate controls:
- The engine speed lever is easy to use.
- The choke lever is spring loaded so the operator cannot accidentally operate the tractor with the choke on.
The mower deck is engaged with the easy-to-see and easy-to-use yellow lever above the dashboard:
- Placement on the right side leaves a lot of room on the left, the entry side of the tractor, for the operator to get on and off the tractor
- Designed for low effort, easy use, and reliable performance
Side-by-side transmission control pedals
Side-by-side foot pedals control the speed and direction of travel:
- Automotive-type accelerator controls ensure easy operation.
- The operator can change direction without lifting foot off the platform. A large pedal surface gives superior operator comfort.
Cruise control
Cruise control is standard equipment:
- To engage, lift up on the cruise lever and hold until the foot is removed from the forward pedal.
- The cruise control can be released by pushing on the brake pedal or the forward pedal.
Parking brake control
The parking brake control is conveniently located for easy access. It holds the brake pedal securely in the locked position.
Mower deck height adjustment
A spring-assisted, ergonomically designed lift lever simplifies adjusting the mower cut height:
- Increments of 1/4 in. (0.64 cm) allow fine-tuning the cut height.
- Cut height is adjustable from 1 to 4 in. (2.5 to 10.2 cm).
- The lift handle is shaped for easy use and is out of the way of entering or exiting operators.
Reverse implement option (RIO)
Using RIO
CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:
- Carefully check the area around the machine.
- Disengage the mower before backing up.
NOTE: Backing up while the mower is engaged is strongly discouraged. RIO should be used only when operating another attachment or when the operator deems it necessary to reposition the machine with the mower engaged.
- Stop forward travel.
- Look behind the machine to be sure there are no bystanders.
- Push and hold in the RIO switch while depressing the reverse pedal slightly.
NOTE: If the mower or other attachment stops while repositioning the machine, return the attachment engagement switch to the off position. Start engine and engage mower. Begin again with step 2.
- Release the RIO switch and reposition the machine as the machine begins to move rearward.
- Resume forward travel. The mower or other attachment should continue operating.
- Repeat procedure to position the machine again.
Fuel tank gauge shows fuel level from the operator's seat
The fuel tank gauge shows how much fuel is in the tank and can be seen without leaving the operator’s seat:
- Easy to check the fuel level
- Convenient location
Serviceability is convenient with easy-open hood
The one-piece hood opens easily to permit checking and servicing the engine:
- Important service points are located within easy reach.
- A service interval decal is provided inside the tractor hood for convenience when servicing the tractor.
The engine fuel and oil filters, the oil check/fill tube, and the oil drain tube are exposed for serviceability when the hood is opened.
The seat tilts up and out of the way to make adding fuel easy.
The 200 Series Tractor are covered by a 3-year/200-hour bumper-to-bumper warranty*:
- Premium features of the 200 Series Tractors allow for this longer warranty period, with more coverage than other tractors of comparable size.
*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.
Quick response (QR) codes link to owner information web pages
John Deere riding lawn mowers are supported by owner information web pages that include links to:
- Safety and how-to videos
- Operator’s manuals
- Parts catalog
- Maintenance reminder sheets
- Attachments
- Warranty statements
To speed access to owner information web pages, a QR code is printed onto a PIN label located near the fuel fill. Since each vehicle model has its own web page, the links are specific to the owner’s model. The QR code also includes the vehicle’s unique PIN which allows for additional customization of the owner information web page in the future.
Hood will not dent or rust and includes quality headlights
- Molded-in color material reduces sound and does not rust or dent.
- Same quality hood material as on larger John Deere tractors provides good resilience and UV resistance for an extended time.
- Openings on the side let in plenty of cooling air while keeping the sound level low.
- Two headlights provide good lighting for nighttime operation.
Help maintain your mower and lawn with the MowerPlus™ app and connector
Overview
Keep a mower running its best and know how it mows with the John Deere MowerPlus app. Simply scan the mower’s barcode to get custom information about the mower.
Benefits
- Engine hours, fuel level, and battery health (as compatible)
- Mowing history with time, distance, area, and speed
- Current day and five-day weather forecast based on location
- Walk-through setup guides
- Expert mowing tips
- Useful attachments for future purchase
- Periodic maintenance reminders
- Safety instructions
To download the free MowerPlus app, visit the Apple® App Store® or Google Play™ store.
Three MowerPlus connectors are available to transmit vehicle information to the MowerPlus app.
BUC10510 MowerPlus Hour Meter Connector is for use with:
- Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
- Model year 2015 to 2020 S240 Tractors (serial number -880,000)
- S100, S110, S140, and S220 Tractors
BUC10929 MowerPlus Deluxe Smart Connector is for use with:
- All S120, S130, S160, S170, and S180 Tractors
- Model year 2021 and newer S240 Tractors (serial number 880,001-)
- Model year 2021 and newer Z515E, Z530M, Z530R, and Z545R (serial number 010,001-)
BUC10537 MowerPlus Smart Connector is for use with:
- Model year 2016 and newer Select Series X300 and X500 Tractors
All the MowerPlus connectors transmit engine hour information to the app, making it easy to track maintenance intervals. The MowerPlus Smart Connector and MowerPlus Deluxe Smart Connector also transmit the fuel level.
MowerPlus connectors require the MowerPlus app on a mobile device to use. The John Deere MowerPlus app and operating system requirements can be found in the mobile device’s app store. The MowerPlus app is only available in the English language, and it is not available in all countries. BUC10510 MowerPlus Hour Meter Connector requires iOS® version 10 or higher and is not compatible with Android™ operating systems.
Apple and App Store are trademarks of Apple, Inc. Google Play and Android are trademarks of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.
Additional details
MowerPlus connectors (sold separately)
Specifications
Compare the specifications of up to 4 models
Key Specs | s220 Current Model |
---|---|
Engine power | 22 hp 16.4 kW |
Oil change | No-tools oil drain with replaceable filter |
Engine manufacturer/model | 44J6 Cyclonic |
Transaxle type | TLT200 hydrostatic, two-wheel drive |
Transaxle control | Side-by-side pedals |
Rear tires | 20x10-8 |
Lift system type | Spring-assisted hand-grip lever |
Cutting width | Accel Deep™ mower deck, 42 in. 107 in. |
U.S. warranty | 3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Engine | |
Power | 22 hp 16.4 kW |
Displacement | 44.2 cu in. 724 cc |
Manufacturer/model | 44J6 Cyclonic |
Type | Overhead valve, full-pressure lube, oil filter |
Cylinders | V-twin, cast-iron liners |
Governor | Mechanical |
Choke/speed control | Separate levers, automatic choke return |
Cooling method | Air |
Air cleaner | Pleated paper cartridge filter with poly pre-filter |
Oil change | No-tools oil drain with replaceable filter |
Fuel system | |
Type | Gasoline |
Fuel delivery | Pulse pump and carburetor |
Fuel gauge | Mechanical, viewable from seat |
Fuel tank location | Rear |
Fuel fill opening | Center, 1.75 in. 4.45 cm |
Fuel tank capacity | 2.4 U.S. gal. 9.1 L |
Electrical system | |
Battery | 12 V 300 CCA |
Charging system | Flywheel alternator, regulated, 14 amp |
Engine starter | Bendix type |
Hourmeter | Yes |
Headlights | Two standard, incandescent |
Taillights or reflector | No |
Backup lights | No |
Rear work lights | No |
12-V outlet | No |
Transaxle | |
Type | TLT200 hydrostatic, two-wheel drive |
Control | Side-by-side pedals |
Cruise control | Standard |
Oil cooler | Fins and fan on transaxle |
Oil filter | Internal, not replaceable |
Differential lock | No |
Forward speed | 0-5.5 mph 0-8.9 km/h |
Reverse speed | 0-3.2 mph 0-5.2 km/h |
Brakes | Internal wet disk |
Chassis | |
Frame | Full-length welded steel |
Primer/paint | E-coat/powder |
Weight bracket | Optional rear |
Receiver hitch | No |
Front axle | Cast iron front axle, front wheel sealed ball bearings |
Spindle bushings | No |
Front tires | 15x6-6 |
Rear tires | 20x10-8 |
Hood material | Molded-in color material reduces sound, will not rust or dent |
Fender deck material | Stamped steel |
Floor mats | Yes, with debris removing channels |
Storage | Storage tray with cover |
Service interval decal | Yes |
Fender handles/grips | No |
Cup holder | Yes |
Equipment mounting | CargO Mount™ system |
Maximum towing capacity | 500 lb 227 kg |
Steering | |
Type | Sector and pinion with single drag link and tie rod |
Four-wheel steer | Not available on this model |
Steering wheel | Standard design, diameter - 12 in. 30.5 cm |
Tilt steering wheel | No |
Turning radius | 18 in. 45.7 cm |
Uncut circle radius | 24 in. 61 cm |
Seat | |
Type | Two piece with open-back |
Seat back height | 15 in. 38.1 cm |
Armrests | No |
Fore-aft adjustment | While seated, 5.5 in. 14 cm |
Seat suspension | Tilt, two rubber isolators |
Lift system | |
Type | Spring-assisted hand-grip lever |
Hydraulic outlets | No |
Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
Cut height increments | 0.25 in. 0.64 cm |
Preset cut height | No |
Mower deck | |
Type | Side discharge |
Cutting width | Accel Deep mower deck, 42 in. 107 cm |
Construction | Stamped steel deck shell |
Mower deck material | Steel, 12 gauge 0.105 in. 2.6 mm |
Mower wash port | Yes, with hose end |
Mower drive system | Manual power take-off (PTO) clutch |
Mower wheels | Two |
Mower wheel adjustment | One bolt |
Mower level adjustment | Easy-level deck |
Mower attachability | |
Type | Slide under tractor |
Front draft arms | One spring clip |
Rear draft arms | Two spring clips |
Mower wheels rotate | No |
Drive system | Single V-belt |
Safety | |
Meets ANSI standard | Yes |
Meets OPEI standard | Yes |
Backup protection | Reverse Implement Option (RIO) |
Safety video | Yes |
Buyer's notes | |
Notes | Molded-in color material reduces sound, will not rust or dent Durable primer and powder paint finish Large, 14-in. (36-cm) steering wheel for more comfortable operation |
Warranty | 3-year/200-hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
Optional equipment | |
Mowers | |
Rear bagger | 2-bag, 6.5 bu 229 L |
Powered material collection | |
Mulching system | Yes, MulchControl™ |
Front thatcher | |
Front blade | 46 in. 116.8 cm |
Mid-mount blade | |
Snow blower | Two-stage, 44 in. 111.8 cm |
Rotary broom | |
Rotary tiller | |
Sleeve hitch | |
3-point hitch | |
Rear power take-off (PTO) | |
Plow, moldboard | |
Box scraper | |
Cultivator | |
Rear blade | |
Disk harrow | |
Landscape rake | |
Sprayer | Tow-behind only, 15 U.S. gal. 56.8 L Tow-behind only, 25 U.S. gal. 94.6 L |
Spreader | Tow-behind only, 125 lb 57.7 kg Tow-behind only, 175 lb 79.4 kg |
Front bumper | Included |
Brush guard | |
Weather protection | Weather enclosure |
Sun canopy | Sun canopy |
Rear receiver hitch | |
Bucket holder | Yes, single bucket |
Grass striping | Lawn striping kit |
Tractor shovel | |
Front loader | |
Other equipment | |
Tow-behind tools | 16 |
Dimensions | |
Height | 45 in. 1143 mm |
Overall length | 75.1 in. 1908 mm |
Wheelbase | 48.9 in. 1242 mm |
Width with mower | 50 in. 1270 mm |
Width with mower (deflector raised for storage) | 49 in. 1244 mm |
Width without mower | 40 in. 1015 mm |
Weight | 481 lb 218 kg |
Accessories and Attachments
Carts
Utility Cart, 7P Poly - 3090GXLP21935
Utility Cart, 8Y Convertible Poly - 3090GXLP22755
Utility Cart, 10P Poly - 3090GXLPPCT10JD
Utility Cart, 10PX Poly with full dump - 3090GXLP72978
Utility Cart, 13 Steel - 3090GXLPHDC13JD
Utility Cart, 16YS Swivel Poly - 3090GXLP68186
Utility Cart, 17P Poly - 3090GXLPPCT17JD
Complete MCS
Drawbar
Front Blade
Home Maintenance Kits
Miscellaneous
Battery charger and maintainer - 3090GXTY25866
Bucket holder (single) - 3090GXLPJD100
Fuel-Protect for gasoline engines, 8 oz (237 mL) - 3090GXTY27534
The John Deere MowerPlus hour meter connector wirelessly links a model year 2003 and newer 100 Series or 200 Series Lawn Tractor to the MowerPlus app on a mobile device:
- No tools are needed for installation.
- Detailed setup instructions are included.
- The connector sends information to the MowerPlus app via Bluetooth® wireless technology when the tractor key switch is on and the mobile device app is running within range.
- The wireless connector and app work together to offer helpful information.
Tractor features available for viewing on the MowerPlus app include:
- Tractor engine hours automatically synchronized to the app
- In-app maintenance reminders and log, based on engine hours
- Help to determine the best time to mow
- Expert pre-mow optimization tips
- Maintenance walk-through instructions
The operator can visit their device’s app store to see new app features as they are added.
MowerPlus hour meter connector (BUC10510) for 100 and 200 Series Lawn Tractors
The hour meter connector plugs into the back of a 100 or 200 Series Tractor key switch. The tractor’s wiring harness plugs into the other end.
Compatibility and requirements
BUC10510 MowerPlus hour meter connector is for use with:
- Model year 2003 to 2020 100 Series Tractors, including all models with an E, D, LA, or L prefix
- Model year 2015 to 2020 S240 Tractors (serial number -880,000)
- S100, S110, S140, and S220 Tractors
NOTE: Model year 2021 and newer 100 and 200 Series Tractors equipped with a digital fuel gauge are compatible with the more-capable BUC10929 MowerPlus deluxe smart connector.
MowerPlus hour meter connector requires the MowerPlus app on a mobile device to use. The John Deere MowerPlus app can be found in the mobile device’s app store:
- iOS® version 10 or higher is compatible with the hour meter connector.
- Android™ versions are not compatible with the hour meter connector at this time.
NOTE: The John Deere MowerPlus app is only available in the English language, and it is not available in all countries. Find operating system version availability in the mobile device’s app store.
Bluetooth is a trademark of Bluetooth SIG, Inc. Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.
Mower Blades
Blade (42A bagging) - 3090GXGX25668
Blade (42A mulching) - 3090GXM170642
Blade (42A side discharge) - 3090GXUC22008
Mower Decks
This complete mower deck can be ordered for replacement, if required.
Incomplete decks that include only the shell, discharge chute, and decals are also available through the John Deere Parts system.
The 42-in. (107-cm) Mower Deck comes with two medium-lift blades for normal cutting and bagging conditions.
Grass Striping Groomer for 42A Deck - 3090GXLP63762
Mower deck leveling gauge - 3090GXAM130907
Mulch Kits
Protection
Riding mower cover, for tractor with material collection system - 3090GXLP70686
Riding mower cover, medium deluxe - 3090GXLP93617
Riding mower cover, standard - 3090GXLP93917
Seat cover, medium deluxe yellow - 3090GXLP92624
Seat cover, medium standard yellow - 3090GXLP92324
Spark Arrester
Sprayers
Mounted Sprayer, 15 gal. (57 L) (100 and 200 Series) - 3090GXLP53283
Tow-Behind Sprayer, 15 gal. (57 L) - 3090GXLP19478
Tow-Behind Sprayer, 25 gal. (95 L) - 3090GXLP19479
Spreaders
Pull-Type Spin Spreader, 125 lb (57 kg) - 3090GXLP25353
Pull-Type Spin Spreader, 175 lb (80 kg) - 3090GXLP25354
Tow-Behind Aerator-Spreader, 40 in. (102 cm) - 3090GXLPAS40JD
Tow-Behind Broadcast Spreader, 130 lb (59 kg) - 3090GXLP39087
Tow-Behind Broadcast Spreader, 175 lb (80 kg) - 3090GXLPBS36JD
Sun Protection
Thatchers
Tire Chains
TerraGrip traction belts (pair) for 20x10-8 Turf Saver and 22x9.5-12 tires - 3090GXLP39857
Chains are recommended for extra traction when using equipment such as a snow blower or front blade.
One pair of chains is included in each bundle.
Compatibility
TY15959 tire chains - 20x8-8
NOTE: For LA105, LA115, LA125, D100, D105, D110, D120, D125, E100, E110, E120, S100, S110, S120, and S140 Tractors.
TY16200 tire chains - 20x10-8 (for some models), 20x10-10
NOTE: For LA135 SE, LA145, LA155, S240, X300/less deck, X300/38X, X300/42M, X300/42X, X300/48X, X300R, X304, and X324 Tractors.
NOTE: The rim diameter is larger for four-wheel steer tires, but does not affect chain requirements.
TY25229 tire chains - 20x10-8 (for some models), 22x9.5-12
NOTE: For LA165, LA175, D130, D140, D150, D155, D160, D170, E130, E140, E150, E160, E170, E180, S130, S160, S170, S180, and S220 Tractors.
TY24327 tire chains - 22x11-10
NOTE: For X320, X340, and X360 Tractors.
TY15956 tire chains - 23x10.5-12
NOTE: For 190C Tractor.
TY26227 tire chains - 23x9.5-12, 24x9.5-12
NOTE: For X534 Tractor.
TY24328 tire chains - 24x12-12
NOTE: For X500, X520, X530, X540, and X590 Tractors. Also use with 26x10.5-12 tires on model year 2016 and newer (serial number 040,000-) X734 and X754.
TY25326 tire chains - 26x10.5-12
NOTE: For model year 2015 and older (serial number -040,000). For X724, X734, X744, and X754 Tractors. Fits turf, bar, and heavy-duty all-purpose (HDAP) tire treads.
TY15958 tire chains - 26x12-12
NOTE: For X700, X710, X720, X730, X728, X738, X729, X739, X740, X750, X748, X758, and X749 Tractors. Will fit turf, bar, and HDAP tire treads. X729, X739, and X749 require BM22725 wheel spacer kit to provide clearance when installing tire chains.
Tow Behind
Lawn Sweeper, 42 in. (107 cm) - 3090GXLPSTS42JD
Lawn Sweeper, 44 in. (112 cm) - 3090GXLP49038
Lawn sweeper dethatcher kit (LPSTS42JD) - 3090GXLP42108
MT42C Multi-Tool 42 in. Combo (Plug Aerator and Thatcher) - 3090GXLP39089
Tow-Behind Lawn Roller, 18 x 36 in. (46 x 91 cm) Poly - 3090GXLPPRT36JD
Tow-Behind Plug Aerator, 40 in. (102 cm) - 3090GXLPPA40JD
Tow-Behind Spiker Aerator, 40 in. (102 cm) - 3090GXLPSAT40JD
Weather Enclosures
The roomy steel-frame cab shields you against snow, rain, sun, and wind to make snow removal a more pleasant experience.
This weather enclosure is compatible with model year 2011 and newer 100 Series and 200 Series Tractors:
- Model year 2011 and newer 100 Series Lawn Tractors including all models with prefix of D, E, and S
- All 200 Series Lawn Tractors
Key features include:
- Double-zipper slots located mid-door on both the right and left side allow easy access to control arms and enhance isolation from the elements
- Forward-raked windshield helps reduce snow and ice accumulation for improved operator visibility
- Super-clear vinyl windows are cold-crack tested to -20 °F (29 °C)
- Double-zipper access slot for snowblower chute-control cable and chute crank
- Assembles and installs with standard hand tools in about one hour
- Frame-mounted attachment bracket for fixing chute-control handle and chute-crank handle within the cab
- Internal non-scratch magnets ensure a custom fit around the tractor’s fender deck
- Rear locking panel holds enclosure tight against tractor frame
- Overall height from ground to the top of cab is 78 in. (198 cm)
Ordering information
Contact your local John Deere dealer for availability and pricing information.
Weather enclosure
Order number: LP74604
Weights
34-lb (15-kg) Wheel Weight (1), cast iron, 5-in. or 6-in. front wheel - 3090GXBUC10724
Quik-Tatch Weight, 42 lb (19 kg) - 3090GXUC13263
Quik-Tatch Weight, 42 lb (19 kg), boxed - 3090GXBG20029
Rear weight bracket (100 Series) - 3090GXBG20627
Wheel weight mounting hardware for attaching one front wheel weight - 3090GXBM17978
Reviews
269 reviews
- Filter
- Star Rating
- Value
- Quality