Power is provided by a durable and efficient high-torque three-cylinder Yanmar® TNV Series diesel engine.
This series of engines was developed to meet Tier 4 Environmental Protection Agency (EPA) environmental requirements by featuring low levels of both exhaust and emissions.
Gross engine hp
Yanmar is a trademark of Yanmar Company Limited.
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASABE Category 1 Standard S278.6 for quick-attach hitches.
NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.
NOTE: Always refer to the operator’s manual for complete maintenance and service recommendations.
Optional premium independent mid lift system operates independent of the rear 3-point hitch. This gives the operator the flexibility to leave the mid mower attached when completing other tasks.
The optional premium independent lift system has been improved over the current 1 Family system by now allowing the operator to have full control of the mower deck in both the raise and lower positions. When the operator reaches the desired height, the button can be released and the deck will hold its position. This feature reduces the effort required to adjust the height-of-cut (HOC) dial and it also allows for quick height changes on the go.
The 2R Series are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.
Safety features of the HST include:
Transmission has two speeds - hi and lo range.
Durability features include:
The operator’s station has been designed to allow for greater operator comfort and increased visibility. The ergonomic layout and convenient color coded controls with large labels allow for easy identification and operation. Large and easy to grab handrails are located on each fender for an easier on and off of the tractor from either side.
Below are other key features of the 2025R Tractor operator’s station:
The thick, soft padding on this seat provides a smooth and comfortable ride. A high, scalloped back makes it easier for the operator to turn to view rear implements.
Key features of the operator’s station include:
Standard equipment lighting includes:
For those operators requiring additional lighting, additional light options are available:
NOTE: Lights mounted to the ROPS will require the warning light brush guard kit.
Optional work light brush guards can ordered to protect lights from debris.
|Select up to 4 models to compare specifications|
Compact Utility Tractor
|Engine power (gross)||17.8 kW|
SAE J1995 rated power
|Power take-off (PTO) power||13.4 kW|
|Rated engine speed||3200 rpm|
|Injection pump type||Indirect injection|
|Emissions compliance||Final Tier 4|
|Cylinders/displacement||3 / 1.267 L|
3 / 77 cu in.
|Number of cylinders||Three|
|Bore and stroke||80 x 84 mm|
3.2 x 3.3 in.
|Cooling system||Water pump|
|Air cleaner||Dual element|
|Engine torque at rated speed||53 Nm|
|Fuel tank capacity||23.8 L|
|Battery size||500 CCA|
|Alternator (12-V)||40 amp|
|Starter size||1.2 kW|
|Fuel consumption||5.8 L/hr|
1.5 U.S. gal./hr
|Standard transmission; forward/reverse||Hydrostatic - 2 range|
|Optional transmission; forward/reverse|
|Transmission gear ranges|
|Final drive||Spur Gear|
|Clutch disk diameter wet clutch|
|Drawbar maximum vertical load|
|Pump rated output||Steering|
|Maximum operating pressure||148.2 bar|
|Draft control sensing||Position control|
|Remote control valves available||Two|
|Category||Limited Category 1|
|Lift capacity, 24-in. behind link arms||400 kg|
|Standard||Rear - 540 rpm|
Mid - 2100 rpm
|Brake (for mid and rear PTO)||Wet disc|
|Crankcase with filter||2.7 L|
|Transmission and hydraulic system|
|Rollover protective structure||Type|
OSHA, SAE, ASAE
|Platform - flat/straddle||Three-piece semi flat|
|Gear shift location - console/floor||Left-hand side|
|Air conditioning, temperature differential|
|Front axle clearance||316 mm|
|Turning radius with brakes|
|Turning radius without brakes||2.65 m|
|Limited slip differential||No|
|Approximate shipping weight (open-station; cab)||813.5 kg|
|Front||R3 Turf - 23x8.50-12|
R4 Industrial - 23x8.50-12
R3 Radial - 220/55-R12
|Rear||R3 Turf - 31x13.5-15|
R4 Industrial - 12-16.5
R3 Radial - 280/70-R16
|Front tread range||95.3 cm|
|Rear tread spacing|
|Tilt steering wheel||Yes|
Choose a 2R Series Compact Tractor