The design of the Z900 Series makes many service components reachable and easily accessible from the ground.
All ZTrak™ Mowers come with an onboard maintenance chart that is conveniently located inside the right-hand console. The service interval chart gives necessary service intervals.
The hourmeter shows the number of hours the machine is run when the key switch is in the on position. It only counts the hours the engine is actually running. Machine diagnostics are the first step of a monitoring system to help operators quickly diagnose common downtime issues. A trouble code light is included on the hourmeter.
Use of the hourmeter and service interval chart helps determine when the machine will need service.
The hydrostatic drive features two 13-cc (0.8-cu in.) unitized hydraulic pumps combined with commercial-grade, heavy-duty wheel motors into a single unit.
One pump and one motor drive each wheel on the ZTrak E and M Series Mowers. This provides several benefits:
John Deere leads the commercial zero-turn mower industry with use of the Michelin X Tweel Turf technology for the ZTrak Z900 Series Mowers.
Michelin is a world leader in tire manufacturing and technology. This airless radial tire solution is an industry first for John Deere, which provides an additional advantage to John Deere customers.
Advantages of the Michelin X Tweel Turf include:
Heavy-duty construction provides the ultimate in performance and reliable operation:
NOTE: Tweels are not compatible with the ZTrak Z997R Diesel.
Michelin, X, and Tweel are trademarks of Michelin North America, Inc.
An exclusive two-year, unlimited hour/three-year, 1200-hour (whichever comes first) bumper-to-bumper warranty is standard for all John Deere E and M Series Mowers. The warranty is best in its class and places John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.
NOTE: 36 months or 1200 hours, whichever comes first. For the first 24 months, there is no hour limitation.
An exclusive two-year, unlimited hour/three-year, 1500-hour (whichever comes first) bumper-to-bumper warranty is standard on all John Deere R Series mowers. The warranty is best in the industry and puts John Deere at the forefront of commercial mowing. It is also hassle free, with one company handling all of the paperwork.
NOTE: 36 months or 1500 hours, whichever comes first. For the first 24 months, there is no hour limitation.
The Z945M EFI is powered by an air-cooled, vertical shaft, electronically-fuel-injected engine:
Engine features include:
An easy-to-use cutting-height lift system allows the operator to adjust the mower deck height with no tools and minimal effort. The easy-to-grip knob allowsallows operators to dial in the desired height of cut (HOC).
Cutting height can be adjusted from approximately 1 in. to 5.5 in. (2.5 cm to 14 cm). Each increment on the knob adjusts the HOC approximately 0.25 in. (0.64 cm). The deck can also be raised and locked in a transport position to provide maximum ground clearance when moving the machine from one area to another.
The transport lock function allows the deck to be returned to the previous HOC after being in the transport position:
This design increases productivity by allowing operators to change the cutting height without having to leave the seat.
On every John Deere ZTrak™ mower deck, there are three 1-in. (2.5-cm) spindles that are cold-forged and heat-treated for strength without bulk. The spindles are supported by precision ball bearings, providing great performance and reliability.
The spindle housing is made of aircraft-grade, ribbed cast aluminum. This unique casting design embosses reinforcing gussets in the housing, which adds both strength and cooling surface area that stands up to commercial applications.
These spindles can be greased from the top and require no disassembly to reach. Grease channels provide lubrication to both bearings.
The ZTrak™ M and R Series Mowers are equipped with either a side-discharge or Mulch On Demand™ 7Iron PRO deck.
7Iron PRO mower decks have demonstrated quality, performance, and durability. They deliver a high quality cut in diverse conditions.
Key features of the 7Iron PRO mower deck:
Key features of the 7Iron PRO mower deck:
|M Series||R Series|
|Z920M - 48 in. (122 cm), 54 in. (137 cm), 60 in. (152 cm)||Z930R - 54 in. (137 cm), 60 in. (152 cm)|
|Z925M Flex Fuel - 54 in. (137 cm), 60 in. (152 cm)||Z950R - 60 in. (152 cm), 72 in. (183 cm)|
|Z930M - 54 in. (137 cm), 60 in. (152 cm)||Z970R - 60 in. (152 cm), 72 in. (183 cm)|
|Z945M EFI - 60 in. (152 cm)|
|Z950M - 60 in. (152 cm), 72 in. (183 cm)|
|Z955M EFI - 60 in. (152 cm), 72 in. (183 cm)|
|Z960M - 60 in. (152 cm), 72 in. (183 cm)|
The deck step safely aids the operator's entrance and egress from machine.
The MOD mower deck delivers unprecedented levels of productivity and versatility to commercial mower operation. With the ability to switch between side discharge and mulching operation with the flip of a lever as the operator mows, keeping most clippings out of landscaping features and where they are wanted is extremely easy.
Key features of the 7-Iron PRO MOD mower deck:
|Z920M - 48-in. (122-cm) MOD||Z930R - 54-in. (137-cm) MOD|
|Z925M EFI-Flex Fuel - 54-in. (137-cm) MOD||Z950R - 60-in. (152-cm) MOD|
|Z930M - 54-in. (137-cm) MOD|
Z930M - 60-in. (152-cm) MOD
|Z970R - 60-in. (152-cm) MOD|
|Z945M EFI - 60-in. (152-cm) MOD|
|Z950M - 60-in. (152-cm) MOD|
|Z955M EFI - 60-in. (152-cm) MOD|
|Z960M - 60-in. (152-cm) MOD|
There are three seating options available on the M and R Series, all of which are factory installed:
The deluxe comfort seat with armrests is standard on all Z900 Series models:
The deluxe comfort seat with armrests and isolation is available on the E, M, and R Series. This seat includes fore/aft seat slide that reduces vibration and increases operator comfort. The benefits of the fore/aft seat slide include:
A fully-adjustable suspension seat with armrests is available and includes:
Specs & Compare
|Select up to 4 models to compare specifications|
ZTrak™ Zero-Turn Mower
|Model no.||ECV850 EFI|
|Horsepower (gross)||At 3,600 rpm, 27 hp|
|Displacement||50.3 cu in.|
|Crankcase capacity||With filter, 2.7 U.S. qt|
|Oil filter||Full flow, replaceable|
Heavy-duty canister type with safety element
|Fuel consumption||Under normal conditions, load, operation, and dependent on loads and operating conditions 1.0-1.8 U.S. gal./hr|
|Fuel tank capacity||11.5 U.S. gal.|
|Fuel tank switch/shut-off valve||Yes|
|Charge system||20 amp|
|Battery voltage||12 V|
|Cold cranking amp||300 amp|
|Hour meter||Standard, digital|
|Operator presence starting system||Brake-N-Go (hand)|
|Wheel motors||Tuff Torq heavy-duty integrated piston wheel motor|
|Speed and direction control||Twin levers|
|Hydraulic capacity||5.9 U.S. qt|
|Hydraulic oil cooler|
|Load rating||4 PR|
|Dynamic braking||Twin levers|
|Park brake||Internal wet disk integrated in the transmission|
|Park brake actuation||Hand brake|
|Type||Electro-magnetic, 225 lb-ft|
|Available widths||60 in.|
|Deck construction||7Iron PRO, one-piece stamped steel with reinforcements|
|Deck thickness||7 gauge|
|Cutting width||60 in.|
|Length||Varies by deck size|
|Tip speed||Approximately 18,000 fpm|
|Caster wheel type||Flat free|
|Caster wheel size||13x6.5-6|
|Front anti-scalp rollers||RH, center, LH|
|Rear anti-scalp rollers||Optional|
|Width||With chute down, 74 in.|
|Height||With ROPS up, 73 in.|
With ROPS down, 47 in.
|Weight||1,275 to1,365 lb|
578 to 619 kg
This light kit signals to others that the machine is approaching. The light is positioned on top of the canopy or on a rollover protective structure (ROPS). It has a breakaway bracket, so that if struck the light can move out of the way.
The front work light kit provides the ability to mow at twilight, increasing productivity hours.
Light-emitting diode (LED) bulbs are used. They provide excellent lighting, efficient use of electricity, and long life.
Includes instructions, two LED lights, and mounting hardware.
Not compatible with Mulch on Demand decks.
This light kit signals that unit is approaching. The light is positioned on top of the canopy or on rollover protective structure (ROPS) with a breakaway bracket; this ensures that, if struck, the light will not break but will move out of the way.
The rear hitch acts as a mounting point for rear and tow-behind attachments:
The jack for the mid-mount mower allows easy access to the underside of the mower for maintenance or blade changing while in the field. The kit contains everything necessary to install the jack onto the front of a mower.
The jack for the mid-mount mower allows easy access to the underside of the mower for maintenance or blade changing while in the field.
The front frame member is pre-drilled to accept the optional jack kit and jack:
NOTE: AE32971 jack is included in the kit. The kit contains everything necessary to install the jack onto the front of a mower.
Not compatible with beacon light kit.
Customers, please contact your local John Deere dealer for availability and pricing information.
Order number: LPA11548
The trash receptacle kit provides mounting for 5-gal. (19-L) bucket and trash-grabbing apparatus (not included). It enables trash pickup and storage without having to leave the mower seat.
The kit also keeps the bucket out of the way and away from the trim side of mower. The bucket attaches quickly and easily with purchased elastic straps:
The mulching attachment allows converting the mowers so they can be used to perform the mulching function (grass or leaves) of this system.
The attachment consists of special mulching blades, mulch baffles to direct the clippings into the blade for recutting, and a discharge closure and hardware. The adjustable baffle can be moved to one of five positions to match conditions using the convenient wing nuts.
The rear hitch acts as a mounting point for rear and tow-behind attachments:
The padded armrest kit provides extra comfort for the operator.
NOTE: The padded armrest kit is only compatible with the mechanical suspension seat provided on the ZTrak™ Z740R Mower.
The field-installed isolated seat kit for the gas Z900 ZTrak Mowers provides operators with an improved ride and reduces operator fatigue when mowing for prolonged periods of time.
This is a dealer-installed kit that converts a base seat with no suspension to an isolated seat.
It is compatible with all model year 2015 and newer gas Z900 ZTrak Mowers with base seats that have no suspension and a serial number break of (30,000-).
The field-installed suspension seat kit provides operators with maximum ride comfort and reduces operator fatigue when mowing for prolonged periods of time.
This is a dealer-installed kit that converts a base seat with no suspension to a suspension seat.
It is compatible with model year 2018 and 2019 machines only.
The field-installed suspension seat kit provides operators with maximum ride comfort and reduces operator fatigue when mowing for prolonged periods of time. This is a dealer-installed kit that converts a base seat with no suspension to a suspension seat.
It upgrades the mower to seat option code 2093.
The kit is compatible with model year 2020 and newer Z900 M-spec ZTrak™ Commercial Mowers. It is not compatible with Z900 E-spec models. This seat is part of the base equipment for the Z900 R-spec models.
A spark arrester screen is available to meet current law in areas requiring use of mufflers under certain conditions or where needed to comply with local ordinances.
Includes instructions, a spark arrester screen, and mounting hardware.
Striping kits are available for all B, E, M, and R Series Mowers. These kits utilize a rubber flap to achieve the striping effect on lawns. Different types of grass will stripe differently.
Striping kits mount behind the deck and can be adjusted for best performance.