×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

2025R

Compact Tractor
2-series-compact-tractors

  • Standard LED headlights and fender lights
  • Hydro transmission with TwinTouch™ pedals for ease of use
  • AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes

Apply For FinancingBuy OnlineMaintenance Plans

Pricing excludes attachments


View Product Brochure
10 Year Warranty Details



Features



Durable, efficient, high-torque 3-cylinder diesel engine provides adequate power

3-cylinder Yanmar TNV Series diesel engine 3-cylinder Yanmar TNV Series diesel engine

Power is provided by a durable and efficient high-torque three-cylinder Yanmar® TNV Series diesel engine.

 

This series of engines was developed to meet Tier 4 Environmental Protection Agency (EPA) environmental requirements by featuring low levels of both exhaust and emissions.

 Model

Number of
cylinders

Engine
displacement

Gross engine power

Power take-off (PTO) power

2025R

3

1.267 L

18 kW (24.2 hp)

12.8 kW (17.2 hp)

Yanmar TNV Series engine offers these features:
  • Economical for good cooling and long life
  • Isolated engine provides reduced vibration and noise for the operator; indirect fuel injection uses a precombustion chamber to give the engine a smooth and quiet operation; aluminum-alloy piston with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
    • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and less noise from the piston slap
    • Higher top rings on the piston and a thinner head gasket greatly reduces the volume of unburned waste gases and increases combustion efficiency
  • Timing-gear teeth have a designed roll-off profile giving almost no clash, no noise, and no backlash
  • High-torque reserve provides plenty of power under heavy load, yet retains excellent fuel economy
  • Easy access to engine check and fill points on the right-hand side of the tractor by removing the side panels
  • Fuel filter with replaceable element
  • Full-pressure lubrication system provides filtered oil under pressure to all vital engine parts
  • Glow plugs provide quick starts in temperatures down to -18°C (0°F) (Optional engine coolant heater attachment will assist starting under more extreme conditions.)
  • Auto-bleed fuel system means there is no special bleeding required if the tractor runs out of fuel; this system will self-prime the injection pump, lines, and injectors, providing fast fuel recovery
  • Key start and shut off eliminates fuel shut-off knob
  • Electric solenoid shuts fuel supply off immediately when key is turned off
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
  • Dry-type air cleaner with safety element keeps dirt and other contaminants out of the engine
    • Safety element (second filter) will protect engine if primary filter would develop a leak
    • Protects engine when servicing primary filter
  • Air filter restriction indicator is standard equipment on the 2025R Tractor
  • Sealed-radiator compartment keeps trash and debris on outside of hood
  • Horizontal exhaust discharges fumes away from the operator station, reducing noise and improving operator visibility and comfort

Yanmar is a trademark of Yanmar Company Limited.

Easy-to-use hydrostatic transmission (HST) increases efficiency

The 2R Series are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.

  • No clutching for fast and easy direction changes
  • Twin Touch™ foot pedals for quick and easy forward/reverse operation
  • Transmission oil cooler cools transmission oil for longer transmission life

Safety features of the HST include:

  • The tractor will only start with the range lever in neutral
    • If the range lever is in gear when the key is turned to the start position, the instrument panel instructs the operator to shift to neutral
  • The engine will shut off if the operator leaves the seat and the forward/reverse pedals are depressed
Twin Touch foot controls Twin Touch foot controls
Two-range transmission
Two-speed transmission Two-speed transmission

Transmission has two speeds - hi and lo range.

  • The range lever is located next to the seat, conveniently within reach of the operator
  • All tasks can be performed using two ranges on the 2025R which means less shifting throughout the day

Durability features include:

  1. Large forged one-piece trunnion shaft with larger support bearings that reduce vibration and noise
  2. Innovative transaxle combines an HST, gear reduction axle, and clutch
  3. Pressure side filtration allows the use of a fine-mesh filter
  4. One pump to supply charge pressure and implement A flow divider splits the flow to various circuits throughout the tractor.
  5. The transaxle has an oil cooler which provides improved hydraulic cooling performance

Fast and easy implement changeover offers versatility

Easy to change implements Easy to change implements
  • Front Quik-Tatch™ hitch makes changing front implements quick and easy
  • All front implements (blades, brooms, and snow blowers) use a common hitch
  • AutoConnect™ Mid-Mount Mower Deck, 120R Loader, and 260B Backhoe can be taken on or off within 5 minutes, and no tools are required
  • Changing rear implements is a snap with the iMatch™ Quick-Hitch, which has three fixed points to back in and pick up a rear implement that is iMatch compatible

Implement compounding improves efficiency

Implement compounding (2025R Tractor shown) Implement compounding (2025R Tractor shown)
  • Loader, mid-mower, and a variety of rear hitch implements can be attached to the tractor at the same time
  • Optional premium independent mid lift system operates independent of the rear 3-point hitch. This gives the operator the flexibility to leave the mid mower attached when completing other tasks.

Superb serviceability improves productivity

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Two quarter-turn fasteners allow operators to easily remove the engine side panels without tools to access to the engine compartment.
Fasteners on the engine side panels Fasteners on the engine side panels
  • The under-hood gas-lift support provides easy access to the engine compartment and eliminates the need for a mechanical prop rod.
Under-hood gas lift makes it easy to access the engine Under-hood gas lift makes it easy to access the engine
  • External hood latch requires no tools and can release using the tractor key.

  • Easy access to regular service points minimizes service time.

  • Daily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panels.

  • Tractors are equipped with a mechanical air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changed.

Air filter restriction indicator Air filter restriction indicator
  • All external engine, fuel, and transmission filters are easily accessible.
  • Fuel tank is located on the rear of the tractor to allow for easy access when fueling.
Fuel tank at rear of tractor Fuel tank at rear of tractor

NOTE:  Always refer to the operator’s manual for complete maintenance and service recommendations.

Optional cab offers protection from elements

The Mauser cab offers protection from the elements and expands the versatility of 2025R Tractors to perform in all climates.

2025R cab 2025R cab

Key features:

  • Full glass doors for maximum visibility
    • Curved glass for a styled look
    • Sealed for cold weather operation
    • Easily removable for summer operation
  • Heater with fan
    • Switches and vents integrated into headliner
  • Dome light
  • Fully openable front and rear windows with gas struts
  • Front sun visor
Operator view from inside the cab Operator view from inside the cab
  • Front work lights
Front work lights Front work lights
  • Front wiper with washer system
  • Dual outside mirrors
  • Rollover protective structure (ROPS) certified cab frame
    • Allows for improved rear visibility
    • Reduces overall height
  • Rubber isolation at all mounting points
  • Interior sound insulation
Interior sound insulation Interior sound insulation
  • Immersion-primed and powder-coated cab frame
    • Provides superior corrosion resistance
  • Integrated John Deere styling
John Deere styling on 2025R cab John Deere styling on 2025R cab

Specifications:

  • Cab height: 1495 mm (58.9 in.)
  • Overall height when installed: 2040 mm (80.3 in.)
  • Overall height when installed to top of beacon: 2210 mm (87 in.)
  • Overall width with cab installed: same as tractor width
  • Cab weight: 236 kg (520 lb)

Optional kits:

  • Rotating beacon light – BXX10310
  • Rear LED work light kit – BLV11083
  • Mauser cab relocation bracket – BXX10507 (used with 1025R and 2025R Tractors with Mauser cab and mechanical-self-leveling [MSL] loaders)
    • Prevents interference with Mauser cab and MSL loader mast

Compatibility and installation:

  • Compatible with:
    • Model year 2017 and newer 2025R Tractors
  • Not compatible with:
    • 260B Backhoe

Specifications


Compare the specifications of up to 4 models

Key Specs 2025r
Current Model
Engine power (gross)SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 rpm
Power take-off (PTO) power12.8 kW
17.2 hp
Steering hydraulics13.4 L/min
3.5 gpm
Implement hydraulics13.4 L/min
3.5 gpm
Hitch typeLimited Category 1
Lift capacity, 24-in. behind link arms415 kg
915 lb
Standard transmission; forward/reverseHydrostatic - two range
Cruise controlStandard
Approximate shipping weight (open-station; cab)Open station: 849 kg
1872 lb
Cab: 1085 kg
2392 lb
Wheelbase1600 mm
63 in.
Engine
Family
ManufacturerYanmar®
Engine model3TNV80F-NCJT
Engine power (gross)SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 rpm
Power take-off (PTO) power12.8 kW
17.2 hp
Rated engine speed3200 rpm
TypeDiesel
Injection pump typeIndirect injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacementThree cylinders: 1.267 L
77 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke80 x 84 mm
3.2 x 3.3 in.
Compression ratio23.1:01
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed53.1 Nm
39.1 lb-ft
Fuel tank capacity20.4 L
5.39 gal.
Electrical
Battery size500 CCA
Alternator (12-V)40 amp
Starter size1.2 kW
1.6 hp
Fuel system
TypeIndirect injection
Fuel consumption
Transmission
Standard transmission; forward/reverseHydrostatic - two range
Optional transmission; forward/reverse
Left-hand reverserNo
Transmission gear ranges
Final driveSpur gear
BrakesWet disc
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
612 kg
1349 lb
Rear
1100 kg
2425 lb
CreeperNo
Cruise controlStandard
Differential lockYes
Drawbar maximum vertical load
Hydraulics
TypeOpen center
Pump rated outputSteering
13.25 L/min
3.5 gpm
Implement
13.25 L/min
3.5 gpm
26.5 L/min
7 gpm
Pump typeGear
Maximum operating pressure137 bar
1987 psi
Draft control sensingPosition control
Remote control valves availableTwo
3-point hitch
TypeLimited Category 1
Lift capacity, 24-in. behind link arms415 kg
915 lb
Power take-off (PTO)
StandardRear - 540 rpm
Mid - 2100 rpm
Optional
ControlIndependent
ClutchWet disk
Brake (for mid and rear PTO)Wet disk
Engagement method
Fluid capacities
Crankcase with filter2.7 L
2.9 qt
Transmission and hydraulic system
Final drive
TypeSpur gear
Differential lockYes
Operator station
Rollover protective structureType
Foldable
OSHA, SAE, ASAE
Platform - flat/straddleThree-piece semi flat
Gear shift location - console/floorLeft-hand side
Cab
Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment
Dimensions
Height
Wheelbase1600 mm
63 in.
Front axle clearance
Turning radius with brakes
Turning radius without brakesOutside front tire: 2.51 m
8.2 ft
Limited slip differentialNo
Approximate shipping weight (open-station; cab)Open station: 849 kg
1872 lb
Cab: 1085 kg
2392 lb
Tires
FrontR3 Turf: 23x8.50-12
R3 Radial: 220/55-R12
R4 Industrial: 23x8.50-12
RearR3 Turf: 12-16.5
R3 Radial: 280/70 R16
R4 Industrial: 12-16.5
Front tread range
Rear tread spacing
Miscellaneous
ToolboxYes
Tilt steering wheelYes
12-V OutletYes

Accessories and Attachments

Ballast

Ballast Box - BW15073

Ballast Box Extension - BW15074

Cab Operator's Station

Drop-on cab from Mauser (Heat Only) - LP70009

Illuminated Rear License Plate Kit - LP70014

Rear LED Work Light Kit - LP70013

Rear Wiper Kit - LP70011

Stereo Kit - LP70016

Cold Start Packages

Engine

Auto-Throttle Kit - BLV10784

Engine Coolant Heater Kit (110 Volt) - BLV10640

Exhaust

Front Fenders

Front Hitch

Front Attaching Support kit (model year 2017- 2025R, 2026R) - BLV10680

Hydraulic angling (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) - BLV10880

Quick Hitch Kit (1023E, 1025R, 1026R, model year 2017- 2025R, 2026R) - BLV10708

Front Power Take-off (Pto)

Front Weights

Front Wheels And Tires

220/55-12 (R3 Turf) Radial Front Wheels & Tires - BLV10745

23x8.5-12 (R3 Turf) Bias Ply Front Wheels & Tires - BLV10741

23x8.5-12 (R4 Industrial) Bias Ply Front Wheels & Tires - BLV10743

Hydraulics

3rd Function Selective Control Valve - BLV11156

Rear Selective Control Valve Kit - BLV11025

Rear Tubing Kit - BLV10775

Lighting

Auxiliary Rear Work Light Kit (1 Light) - LVB25547

Beacon Light Kit - LP70012

Forward Lighting Kit (2 Lights) - LVB25546

LED Work Light Kit - BLV10497

Premium LED Work Light Kit - BLV10673

Rotating Beacon Light - BXX10310

Warning Light Brush Guard Kit (Two Guards) - BLV10400

Work Light Brush Guard Kit (OOS Only) - BLV10399

Miscellaneous

Rear License Plate Kit (Includes Light) - BLV11042

Tractor Cover - LP95637

Open Operator's Station

Canopy Kit - Rigid Plastic - LP64809

Seat Cover - LP68694

Power Take-off (Pto)

Rear Fenders

Rear Wheel Weights

Attaching Hardware for Rear Wheel Weight, 60 lb - BM17987

Rear Wheel Weight, 60 lb (27.2 kg) - BM17965

Rear Wheels And Tires

12-16.5 (R3 Turf) Bias Ply Rear Wheels & Tires - BLV10740

12x16.5 (R4 Industrial) Bias Ply Rear Wheels & Tires - BLV10742

280/70-16 (R3 Turf) Radial Rear Wheels & Tires - BLV10744

Three-point Hitch

3-Point Hitch Tractor Receiver Hitch - LP25001

iMatch Quick Hitch Bushings - LVU12858

iMatch Quick Hitch Bushings - LVU15507

iMatch Bushing Kit - LP19969

iMatch Bushing Kit - LP25004

iMatch Quick Hitch Upper Adapter Bushing - PM00353

iMatch Quick Hitch Upper Adapter Bushing - PM03008

iMatch Quick-Hitch Category 1 with adjustable top hook - LVB25976

iMatch/Quik-Coupler Brushing Kit - BW15056

Weights

Wheels And Tires

Reviews

4.29

49 reviews

Rating Snapshot

32
8
3
3
3
4.33
4.33
4.58

2017 2025r

1/5

I purchased my 2025r in Beaumont Texas and is cheaply built

Pros

Cons

E C C

From: Warren Texas

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

0
2
5

2025R Big disappointment!

2/5

I recently traded my 2010 JD 2320 with a 62" drive over mower deck for a 2021 JD 2025R with a 60" auto-connect mower deck. I ordered this tractor and when it arrived this was sure a disappointment. The 2025R just seems cheap!! For example the individual brakes have been reduced to a single brake pedal, the drawbar has been replaced by a plate with a hole in it, the light that indicates that the 4WD is engaged no longer exists, the levers to shift the pto and hi and lo for the transmission seem very flimsy compared to the old solid levers, the rollbar no longer folds down out of the way, instead it folds down just enough to walk right in to it with your forehead when you try to walk behind the tractor and finally the pedal to lock the differential is just a rod that only sticks out about an inch. I was told by my salesman that there is an aftermarket pedal you can get for the diff lock. When I ordered this tractor I did not see the new models, but I went with 2025r Instead a 1025r because I didn't want to go backwards, but compared to my 2320 it doesn't seem to live up to the standards. I was told that the 2320 was made by Yanmar for John Deere and that the 2025R is made directly by John Deere this is probably the most disappointing part!!

Pros

Cons

Ric 1973

From: Indiana

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Expert

1
2
5

2015 great combination tractor

5/5

I bought this tractor a month ago and traded in a 1025r it feels like more tractor and I love it very useful and works hard

Pros

Cons

Jason1989

From: Grand Rapids Michigan

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

This thing rocks!!

5/5

Very powerful little machine, it's great for getting into small places but is happy in wide open spaces as well.

Pros

Cons

KO1977

From: SE Wisconsin

Length of Ownership: 1month

Usage Frequency: Monthly

Level of Expertise: Expert

5
2
5

Makes managing our land much easier

5/5

I bought the 2025R a few months back to help with my bad back. It's exceeded my expectations. We added forks, a rototiller, and post hole digger and now can do nearly anything we want. We've also used the tractor to do things that we never even thought about. While I wouldn't hesitate to buy again, I'd probably go with the smaller 1025R. While the 2025R is more stabile and comfortable for me, the 1025R would fit into smaller spaces.

Pros

Cons

brianw13a

From: Blissfield, MI

Length of Ownership: 3months

Usage Frequency: Daily

Level of Expertise: Beginner

5
2
5

Love the Tractor but……

4/5

I’ve had the 2025 Tractor for about 5 months and I love it, has plenty of power and works hard, but has couple of things that can be improved: Seat Suspension needed for harsh ride, and needs a guide on the mower deck front attachment for when removing and installing deck with loader on tractor.

Pros

Cons

Jimmy B

From: Washington NC

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Great little tractor.

5/5

I have owned the tractor for a few months. Already cleared a fence line, dug a drainage ditch, and mowed my creek property. Work perfectly.

Pros

Cons

Garrys2025r

From: Mississippi Gulf Coast

Length of Ownership: 3months

Usage Frequency: Monthly

Level of Expertise: Intermediate

5
2
5

Very happy 2025R owner

5/5

i have a 2019 2025R with loader, backhoe, 54D mower, rear Frontier blower and other non-Deere implements. It is used on our large forested property for all types of regular (mowing, snow) and periodic (box blading, digging, etc.) tasks. Perfect machine for our size property and usage pattern. While the 1025R is similar and very capable, the tire size, height, clearance, weight, ground speed, and stability differences more than justify this machine in my opinion. With tractors, more power and size is almost always better but I have found you need to buy for your expected usage and realistic "peak" uses to avoid buyers remorse. I have read about many upgrades created by just slightly underbuying. This particular tractor feels like and for me is one that allowed me to feel very satisfied without looking up at the larger frame 2-series or entry 3-series with tractor envy. This is a very capable and relatively affordable machine.

Pros

Cons

happycad

From:

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5

The little engine that could :) !

5/5

This compact tractor and backhoe is the perfect size for my wife and I to operate and maneuver around our little place. The manual thumb of the backhoe is a MUST HAVE!!!

Pros

Cons

Fatty Patty

From: Olalla, WA

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

Easy to use

5/5

We live on 35 acres with 30 of it rented to a local farmer. Originally purchased a 1025R, but it was just a little to small for what I was doing. The 2025 fits the bill perfectly.

Pros

Cons

Jim M

From: Bloomer, WI

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Tractor has been great-? on MMM

4/5

I bought it back in Feb, and used the front mount snow blower and loader with great success. Question is I have to take loader off or it hits mower deck draft arms. Is this correct, I saw 1025r you dont have to take loader off.

Pros

Cons

Red Fox

From: Northwest Wisconsin

Length of Ownership: 3months

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5

2025r year 2016

2/5

Bought in 2017 as leftover, has 120 hours got with the backhoe attachment / loader

Pros

Cons

Tim6645

From: Rhode island

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Leaking transmission

3/5

Bought a new 2025r one month ago and noticed oil on garage floor right rear side of tractor only 6.9 hrs on machine. Oil is leaking from transmission housing will be going to dealer tomorrow to tell them what’s going on needless to say I’m not very happy about it!

Pros

Cons

From: Tennessee

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Love the 2025R!

5/5

Quick history - in 1975 I bought a JD210 - 10hp with 47" deck. Started every time I turned the key. In 2015 went from 1 acre to 3, so I picked up a 1023E. It was nice, but I decided a bit more clearance and wheel base might improve ride, so Nov 2019 traded for 2025R. Love the loader, more relative comfort of ride and seat.

Pros

Cons

JW420

From: NE Illinois

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

3
2
5

2014 2025R

5/5

Tractor gets used by everyone in the family. To give you an Idea of to what extent let me just list the attachments we have. Mid mower with mulch kit ( wouldn't mow with out the mulch kit again, such a better cut. ) front loader, tiller, flail mower, bushhog mower, 2 bottom plow, potato plow, 6' disc, dry spreader, reese hitch for 3pt, back hoe, and quick hitch. So you can see why its so important that you can have multiple attachments on the tractor and operate them individually. The ease of changing attachments is KEY. I have installed and removed every single attachment I have in less than 30 min. just to win a bet with someone that didnt buy a DEERE. With 25 acres to tend you shuffle alot of equipment off and on in a day. Love the tractor.

Pros

Cons

  • mid mower drive shaft is a pain.

Karo

From: Bluffton, IIn

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

A must have for small acres

5/5

I’ve owned my 2025r since 2/14/20 and now have almost 100 hours on it and to be honest I wished I’d bought it sooner. I have 3 acres that I maintain plus I use it to help maintain the adjoining woods of my neighbors. This tractor does it all! I use it to mow, spread fertilizer/lime for the several neighbors with my ss1023b, drag/haul firewood, push snow, heck, I even used it to remove my old asphalt driveway! Now it’s not a D-6 or a JD 750 mind you, but it’s still remarkable for its size! And I’ve run heavy equipment for several years! It’s definitely a multitasker! No problems with it so far either. My John Deere Dealer ( Meade in Wytheville,Va) has also been very helpful with implement decisions and getting the best deals and if needed, financing. I always owned red but now I believe Green will be my favorite color!

Pros

  • manuverable
  • multi tasker
  • very easy to change implements
  • comfortable for its size
  • except for one zerk easy to service

Cons

  • could use a little more power in high range

Wildbill58

From: SW Va

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Does everything I put it through when it's not at dealership for repairs

3/5

Traded our 2012. 23hp sub compact tractor on a 2020 2025R this February. Put 24hrs on it managing 3acres and a large garden. Noticed oil under tractor after every mowing. Dealer has had 2 times now attempting to fix the mid pto seal. Each repair keeps leaking. The second time they have had over 4weeks trying to repair and and now we are being told John Deere is replacing the transmission. Very frustrating considering only 24hrs on the machine. I was raised on a farm with John Deere and work as a Heavy Equipment Operator and still love John Deere. Just hope they get it figured out. Hats off to dealer as they have been on top of things even going as far as making sure we have a mower when needed. Guess it's my turn to draw the short straw.

Pros

  • plenty of power for my needs
  • good fuel economy
  • plenty of weight to ground
  • easy to use and maintain

Cons

  • been at dealer getting fixed more then working

Misterclean

From:

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

lOVE MY 2025R

5/5

I PURCHASED THE 2025R ABOUT THREE MONTHS AGO AND HAVE ABOUT 45 HOURS ON IT NOW. IT HAS BEEN ABSOLUTELY THE BEST SO FAR. I USE IT FOR BUSHHOGGING, GRASS CUTTING, MOVING DIRT, AND MANY OTHER LITTLE THINGS AROUND MY PROPERTY. I HAVE ABOUT 6 ACRES AND BUSH HOG ABOUT 4 ACRES AND THEN USE THE MID MOUNT MOWER FOR THE OTHER 2. IT GETS THE JOB DONE. I DON'T REGRET THIS PURCHASE AT ALL.

Pros

  • easy operation
  • power
  • looks

Cons

  • none

jOECOOL81

From: MARKSVILLE, la

Length of Ownership: 3months

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Love It

5/5

We are new to the Tractor world. After lots of research and questions we went with the 2025R. Thank you Tractor Tim for all your JD demos and videos. I can see so far this may be one of the best investment my wife and I have made in awhile.

Pros

Cons

Stevo

From:

Length of Ownership: 1week

Usage Frequency: Daily

Level of Expertise: Beginner

5
2
5

second lawn tractor to blow head gasket

1/5

I have been a loyal JD customer for the past 32 years. But, as of late, I am getting very frustrated with the product. My 2025R just blew a head gasket! It is 2 years old with 400 hrs. This is the second machine that I have owned that has blown a head gasket. No....I did not overheat the engine. My 1026R that I traded May 2018 also blew a head gasket with minimal hours on the engine. I have always been a JD fan but this is getting frustrating and very suspect. What is going on with the Yanmar Diesel that they are blowing head gaskets. I have antifreeze leaking out of the head gasket and dripping down the side of the block. Be on the look-out for this telltale sign of a blown head gasket. My dealer says this is unusual and I must be unlucky. What the heck John Deere? I am now dead in the water for 7-10 days without a machine and a ton of projects and grass cutting that needs to get done. I need a reliable product! Sincerely, loyal JD customer but fading fast.

Pros

Cons

  • blown head gaskets

cjHwisc

From: Suring, wisconsin

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

1
2
5

John Deere Quality 2025R

5/5

I recently purchase a new 2025R and I absolutely love it. I purchased several addition implements To help manage my property such as a Brush Hog, Box Scrapper and my favorite a Backhoe. It works fantastic for digging out Arizona brush and buried rocks in the hard soil. The 2025R is a small tractor but it has passed every test that I have put it to. In addition it is very easy to operate. The only issue I have is I can’t get my wife off of it.

Pros

Cons

Azrich

From: Prescott Valley

Length of Ownership: 3months

Usage Frequency: Daily

Level of Expertise: Beginner

5
2
5

Tractor is close to my 30 year old John Deere 855

4/5

I like the 2025R for the most part and in the market for a new John Deere tractor. Mostly for my experience with my John Deere 855 which will be 30 years old this year. My 855 has been extremely dependable and I have only needed to replace the battery and other small maintenance items such as oil and filter changes. With this legacy, I'll purchase another John Deere. I've also looked at the modem 2032R and find it better suited for me. Although the 2032R has roughly 600 more pounds in weight, it also has 40 percent more in rear linkage capacity and front end loader capacity. Turning radius between the 855, 2025R and 2032R is only 6 inches difference. Tire sizes are within proximity to each other. Although the 2025R is a great machine and will suit most I have to pick the 2032R because, unlike the 2025R,it does not have a Limited category hitch which may limit lift height and linkage width. All in all, it's a John Deere and both great tractors.

Pros

  • dependable tractor

Cons

  • limited category hitch

Ed855

From: Cambridge, Ohio

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Expert

0
2
5

fantastic little machine

5/5

Just bought a 2025r this year with loader and backhoe. I own a landscape construction company and was looking for a smaller scale machine to get into tight areas that all my other skid steers and excavators cannot get into. I was very doubtful at the beginning that this machine could perform to the needs that myself and my guys were looking for... but let me tell you i was very wrong. This machine has already become an essential piece of the crew. Even though it is very small compared to my other equipment , it can definitely hold its own. Plenty of power and super user friendly. I would highly recommend this machine to anyone. From a business standpoint , a happy crew is a productive crew and this machine alone has definitely ramped up production by itself. well worth every dollar invested.

Pros

Cons

michael87

From: sterling, ct

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Huge tractor in a small package

5/5

I have a 2014 2025r with 658 hard hours on a 62 acre Christmas tree farm. I run a 5' brush hog, 5' tiller and a 64" rear snowblower. It handles them all awesome with no problems. I have worked the snot out of this tractor and it only amazes me. The tiller and bucket combination has turned it into a little bulldozer. I have cleared a lot of brush and trees with the brush hog on back and forks on the front. I have a hard time believing the people who rated this low knew what they were doing. I do wish that manufactures including john deere would make a skid plate to protect the front drive shaft at the output end to keep tall weeds from wrapping around and snapping it. I built my own.

Pros

  • tough as nails

Cons

Impressed

From: verona, ny

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

My First Compact Tractor

5/5

I researched this purchase for probably 2 years. My biggest struggle was is 2025R worth the extra cost over a 1025R. I must say that yes it was the increased ability is well worth the additional cost. I loaded the tractor up with options. 3rd function valve was the same as purchasing a diverter and is more capable option and a much cleaner installation. The Load N Go is great for working on the deck.

Pros

Cons

MIFree

From: Michigan

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5

2015r with loader,backhoe,mid mower and pallet forks

2/5

Oil leak at rear of tractor. Loader leaks down quickly! From a height of 41" the bucket is on the the ground in 6 minutes. Raising the 3 point lever causes engine to labor. Will also cause independent mid hydraulics to raise by itself. Loader bucket is difficult to put on. Pallet forks fits perfectly as does my son's bucket from his 1025r Tractor was delivered with nuts and bolts loose and some pins missing. It you contact service is always 2 to 3 weeks before we can work on it. Yet they delivered it in that condition.

Pros

  • none

Cons

  • poor quality control.
  • very expensive
  • service told me because i bought it in the
  • spring they were rushing through every thing

REStu

From: Onsted Michigan

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Expert

0
2
5

Love this tractor

5/5

Use this tractor in an automotive repair/agricultural setting, it does everything I ask it to do, don't be fooled by its small size...it is mighty

Pros

Cons

CBw12

From: Cda idaho

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

so far so good

5/5

doing various jobs around my 3 acres, i find this 2025 a nice size tractor. i have the loader and the oh so convenient backhoe attached fulltime. i find myself using the backhoe more. yes, you can stall it if you try grabbing more than its meant for. but just know the limitations of this size tractor and you can flogg it all day long and get a lot done without breaking a sweat. i just dont want a huge tractor. been there done that. if i trade in a few years i most likely will stay with J D. and move up to 2032 for that little extra asskick. otherwise it will be the same. such a good product. i used to be a design engineer for Cat and we always had to watch out for J D outdoing us for durability. J D is a good value for the money.

Pros

Cons

jaybee

From: TX

Length of Ownership:

Usage Frequency:

Level of Expertise:

4
2
5

I have 2025 from 2014. I have been very happy with it.

5/5

I use have 350 hours on a 2025 from 2014. Mow, bushhog, load and grade gravel road. It has served me well. I keep in garage and have no issues with rust. Still looks great. If I got a new one I would get a bigger one I think. You can never have too much tractor.

Pros

Cons

Kent50

From: Edinburg va

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

tough and resilient

5/5

Bought this tractor 3 years ago to manage farming one acre and mowing several acres of rough field. I've beat the heck out of it with no problems and it continues to perform well. It has excellent 4WD and is capable of most small tractor duties. The front loader has been a life saver in preparing our dirt road annually.

Pros

  • tough has not broken ever
  • excellent 4wd

Cons

  • have broken signal lights by mowing near branches

johnjrs

From: Massachusetts

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Mean little tractor

5/5

I was raised on a Texas Cotton farm and ran BIG Deere stuff (200-300HP tractors)all my youth years. Grew up moved to town only to find I really missed the country. Bought a small piece of land (30 acres)and needed a small tractor to work it. Purchased a 2025r with a front end loader, 48" Brush bull shredder and box blade. This little tractor is a beast! I dug a 20x40' pit 6' deep in near solid rock with the front end loader and teeth down on the box blade. I would break up the rock with a hand jack hammer into car hood or so size pieces and haul em out. I was VERY surprised how much power this tractor has and how much you can push in 4 wheel drive. The 48" brush bull with swinging hammer blades will mow ANYTHING smaller than 1.5" in diameter, Our place WAS covered in heavy thick central Texas Brush and Acasia bushes. This setup will mow em down flat in one slow pass. Prickly pear cactus is no problem either. I purchased a Frontier brand 54" rock bucket later that allows you to grub Cactus and move softball and bigger size rock with ease while letting the dirt fall through the "teeth". I just bought a 62D belly mower but have not used it yet as it id Jan 2nd as I type this review. I would highly recommend this tractor. I would say to any owner to put some good tire sealant in the tires as they will be flat if you run them in Mesquite or Cactus much. The tires are sorta thin IMO. Having said that I beat on mine pretty hard in sharp rock under heavy loads and haven tore a tire up yet...

Pros

  • easy on fuel

Cons

  • needs thicker/heaiver tires

littledeereowner

From: Brownwood TX

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Expert

5
2
5

2025R

1/5

I ordered a 2025R with backhoe and bucket and a 54 inch mower deck. I have had the backhoe rebuilt after a hour of use do to excessive leak down. I would disconnect it and it would just bleed off to the ground making it hard to reconnect even if I tried right after I took it off. The backhoe has no power and will not dig through the smallest roots. Tractor did not have the power to back up a slight incline with a full bucket of topsoil just wouldn't move. The drive on and off mower did not work as advertised when the John Deere mechanic was showing me how to use it the mower caught the bucket stand and bent a number of brackets up front. The neutral safety switch has no light and is hard to get to engage half the time the tractor is killed when you get off when you think you have it engaged.

Pros

Cons

Senior

From: Wellsboro, PA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

1
2
5

Great Tractor

5/5

I use this for Grinding Stumps, and other general tractor work. Traded in my 1025R for this one. It is a very great up-grade. Heavier and sturdier, which is what I needed.

Pros

  • power

Cons

DanTabler

From: Hedgesville WV

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

2025R Great tractor from mowing to food plots and landscaping

5/5

I purchased John Deere 2025R. I carefully reviewed and looked at the 1025R. And must admit i was impressed. Nice little tractor. Loader, backhoe, mower I thought wow what more could you ask for. Then I reviewed and looked at the 2025R. Larger tires, more lift capacity on loader and stronger hoe. I wanted a tractor that could do it all and the 2025R was the one for me. I like the larger tires more stability less tipsy when going though woods to reach fields where I do food plots for deer. I purchased mine with the 130H loader(Quick Attach) and 270A backhoe. (Quick Attach) I LOVE this tractor. I have a 3 point 5 ' finish mower and a 5' brush hog and it handles them with ease. The backhoe has great power and you don't have to take off 3 point to install it. The 3 point is needed to hook it up. That's another key feature over the 1025R. I have nothing against the 1025R it is a bit more fancy nicer seat 12volt outlet storage compartment but the 2025R is more of a work tractor and all those extras could be added if you feel there necessary well worth the extra $$$$. For better lift and stability. I hope this helps anyone that's stuck between the 1025R and the 2025R like I was. But if your still not sure. I never heard anyone say I wish I Bought a smaller tractor.

Pros

  • quick connect h130 loader
  • 3 point stays on tractor to connect 270a backhoe
  • step though floor board
  • easy to check fluids
  • stability with large tires.

Cons

  • no arms on seat
  • no tool box for pins etc.

Goodolboy74

From: Sterling Township, PA, USA

Length of Ownership: 1week

Usage Frequency: Daily

Level of Expertise: Expert

4
2
5

Great Tractor

5/5

Owned a 1023E and traded up to the 2025r and it was a very good move. This tractor is the all around package. Small enough to cut grass with, but packs enough hydraulic and PTO power to do most anything I need it todo, from grading, rotary mowing, and seeding. Only found one thing I am a little disappointed with and that is what you have to go through to get to the main drive shaft front U joint grease fitting up by the engine. Wish they would have put the access panel through the lower dash pane, so you didn't have to loosen the whole dash to move it out of the way to get to it, but that is the only thing I have found that i don't care for. I defiantly give this tractor an A+. Great little machine.

Pros

Cons

snowman

From: Easton, MD 21601, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

4
2
5

Seems well built, but watch out....

4/5

With 60 hours on my new 2025R I was mowing a pasture with a flail mower on the rear when things went wrong. No belly mower was mounted underneath, and Deere for whatever reason does not install a guard to shield the 4' long propeller shaft that extends from the transmission to the front axle. Grass and weeds wrapped around the shaft building up the diameter until clearance around the shaft was gone. At that point the side pressure snapped off the splined stub that sticks out the front of the transmission where the shaft connects. It's a major repair which fortunately was covered by warranty. But there's still nothing to protect the shaft from this happening again. IMO, this is a serious oversight on Deere's part. What am I supposed to do now, install a mirror so I can keep track of it from the driver's seat? If not for the fact that I own other JD equipment that has served well my rating would not have been as generous.

Pros

Cons

From: Illinois

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Expert

4
2
5

Best piece of equipment I have ever owned

5/5

Spent the extra bucks and get the front end loader.You will be glad you did. I have a 26 acre farm and this tractor amazes me everyday. I love this tractor.It has 60 hours right now.

Pros

Cons

oldguy

From: Bowling Green, KY, USA

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Beginner

5
2
5

Excellent little machine

5/5

My 2025R has 150 hours on it and has spread over 1200 yards of dirt using the bucket and box blade. At times the dirt was wet and very heavy. I have pushed it to the limits and it hasn't failed me once. The drive on mowing deck is also very well constructed and is extremely easy to install and remove. It cuts grass as good as a push mower. This is one quality machine!

Pros

Cons

Toyo

From: Montz, LA 70068, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

Verry Nice Compact Tractor

5/5

I have a small horse small ,large gravel driveway I work this little tractor to the limits and it takes everything I give it .I use the front loader with a box blade to the limit.Tactor is very easy to use My wife uses loader like she has ran one her whole life .

Pros

  • this tractor is dependable and works hard

Cons

  • must use leverage points

JSban1

From: Cincinnati, OH, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Great Tractor with Front End Loader

5/5

I have owned my 2025 for just over a year and I can say I am 100% satisfied with the tractor. The front end loader is an absolute necessity and makes the unit twice as versatile as one without the loader. I use the tractor for a lot of different things, light plowing, bush hogging, disking, moving firewood, dirt, gravel and digging post holes. The dealer I have conducted business over the past has been excellent, but when I took the tractor in for the 50 hour maintenance I had one minor problem that I needed fixed. The lift arms on the rear of the tractor were not level, causing the bush hog and disk to cant to one side. Even with the leveling device on the right lift arm cranked all the way up, the implement was still not level. The right rear lift arm needed to be removed and moved one notch down on the spline to correct the problem. The dealer simply put a locking nut on the bottom portion of the lift arm leveling device. Not a fix but I will give it a try. Minor annoyance.

Pros

Cons

Lons

From: Guntersville, AL, USA

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

A real farm tractor!

5/5

Simple inline diesel with NO complicated DPF emissions nightmare to deal with.

Pros

  • the huge tires smooth out the rough terrain.
  • diesel engine is smooth quiet and powerful.
  • great ground clearance.
  • no dpf filter system.
  • proven resale value.
  • nice long wheelebase.

Cons

  • excessive cold start smoke.
  • diesel exhaust fumes are harsh when loader is in l

thall90024

From: Boyne City, MI 49712, USA

Length of Ownership: 1month

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

2025R

4/5

I Purchased my 2025R in March of 2015 with a 62 inch drive over a box blade and a tiller. The only thing i really had an issue with is the rattle from the heat shield. It actually broke i thought that was the reason for the rattle so i had it replaced and it still rattles so i just bent it out of the way. I probably should have opted for the 2032 as the 2025r bogs down on the hills i mow on.

Pros

Cons

Borisbadenov

From: Barbourville, KY, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Beginner

4
2
5

I love my green machine, but.....

4/5

I've reached about 46 hours tach time in just under two months of ownership. I have the 2025R w/ H130 FEL & 270A backhoe w/ thumb/ 54D deck. Overall, I can't complain. I do like the machine a whole lot. I think a lot of my issues may be 'newbie' issues. There's a lot of engine knock between 1600-2000 RPMS. Normal? Maybe. The heat shield rattle drives me nuts as well. Both are of no major concern, but are bothersome. I'm happy, but keep thinking I should have gone to the 2032R or even a 3033R. I always feel that I should have gotten more for the money. In the end, I must say, it's a wonderful tractor just a bit pricey for what I got IMHO. HP is sufficient if you are reasonable about expectations. Don't think you're getting a commercial performance beast here. It's reasonable for a small land owner/residential use. I do love the thumb on the 270A backhoe. Very useful. I should mention the u-joints grease issue! There isn't a lot of information beyond the forums, like GTT. My 50 hour maintenance is due soon and this U-joint thing has me concerned. Can't see how to get to the fittings, and don't want to mutilate or dismember my machine for a simple routine lube task. Bad on JD for not doing a better job on documenting and giving clear access for this. Maybe, it will turn out to be a non-issue. I'll edit if that is the case. Summary, If you have the cash, just step up to a 2032R or 3033R and don't look back. If 2025R is the cap of your budget, you won't be disappointed. It does deliver, but if you are like me, you'll always want the next size up machine! Hoping to trade up to a 3033R or 39R next summer!

Pros

  • 270a bh easy to use
  • 54d drive over deck cuts great
  • h130 fel easy to remove
  • 2025r pleasure to operate
  • 25hp is enough to get the job done
  • simple to operate

Cons

  • mystery u-joint lube issue?
  • wish the 54d had swivel wheels for moving
  • rattle of heat shield
  • pricey w/ attachements
  • engine knock normal?
  • should come with 1025r seat for $!

Grumpka

From: North West NJ

Length of Ownership: 3months

Usage Frequency: Daily

Level of Expertise: Intermediate

3
2
5

This is a great tractor

5/5

I have had several John Deere tractors. I traded my 2305 on this 2025 and was very impressed. Plenty of power, mowing and handles terrain well. Loader workes great ,also have a rear snow blower, wouldn't trade this combo for anything.

Pros

  • good all around

Cons

  • rear safety cut out on mower

Greendoobie

From: FrostburgMaryland

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

seems great but for what I consider to be a couple flaws

4/5

For the most part love the tractor and find it to be a good tool. It does however require a bit of crawling around under to attach and detach the mower deck which when your getting a bit older can be a serious challenge let me tell you, if you have nothing on the back like a ballast box or other accessory its a reasonable job but again a bit of a challenge for us older folks. The PTO switch underneath tends to be a bit flaky and just don't see it being protected enough. If you bump anything like a twig or something if your out in the pasture you better plan on having to fix it. Setting those two issues to the side its a great compact tractor and gets the job done.

Pros

  • pure power in the toughest of spots

Cons

  • poor pto switch shielding
  • difficult deck attachment process

Jamesbigdawg

From: Avon NY

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Better than the 2210 but

3/5

The 2025R is a step up from my 2210 but low range is too slow and high range is too fast for mowing and could use more power. It also has a very annoying rattle from a slotted piece of metal to hold a couple of wires/tubes located just ahead of the fuel pump. John Deere or dealer was no help.

Pros

Cons

wmnbs

From: WI

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Expert

0
2
5

2025R Almost perfect for this segment.

4/5

Got mine last year in 2013 and have used for 35 hrs to date. So far it has been above average with 62" mower deck. Could have used just a bit more power but it would also use more fuel so I'm pleased over all. That said I have several steep side hills to mow. This thing is great. Very stable so I don't get upset to throw it sideways on a slope. I do recommend this model to anyone . If you are planning on using as mower the front grill can possibly get clogged with grass clippings and you may need to stop once in a while to brush them off. [If you use bag unit this is not an issue only w/out bag and then only when mowing with deck at the highest setting] This is due to previous dry clippings that are left behind and the fact that I mow grass at the highest possible setting which allows more debris to escape from under the deck. Could be improved maybe , but not a real big deal as I need to stretch my legs every hour or so anyway.

Pros

  • great ergonomics
  • great quality

Cons

Jimmy1

From: North Carolina, USA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Expert

4
2
5

2025R

5/5

I owned a 2210 s.c.u.t and it was ok but JD really cut alot of corners on that model and did not design the 2210 very well. it was basically a garden tractor with a 540 pto a weak one at that. With all that said i did alot of research on the new R series and i really liked everything i had read and i like the size of the s.c.u.ts but need the durability of a fulll frame compact and the 2025r hit the spot i have owned for 3 months and have done stuff with it that i would have bet lots of money saying it would do it and would be in huge debt! because it did it!!

Pros

Cons

David69

From: Michigan, USA

Length of Ownership:

Usage Frequency:

Level of Expertise:

5
2
5

wow Nice job Deere on the 2025

5/5

My 2025 got delieved on 10/04/13 with a loader and 62" mid mount mower and I'm very pleased. I trader a 2305 with a loader and 60" cut. What I great tractor I have owned John Deere tractors for over 25 years and the reason is easy try the 2025 and you will be hooker on. In my option the best compact tractor on the market. The 2025 is more stable on mower my hill then the 2305, guessing the bigger tires, added weight, longer and wider frame makes a big difference, I would have never believed if I hadn’t been the one mowing. The gauges are easier to see and read and the 4 wheel light is grear. No transmission fan to worry about and the higher view from the driver is awesome. The loader works faster and low gear in the 2025 is faster then the low on the 2305, which is what I use for mowing. I have 10 acres to mow and about 2 are on hill. I had no problems with power or traction. In fact the bigger tires seem to have more traction and the ride is a lot softer and so far fuel consumption is measurable better on the 2025. I would recommd 2025 to anyone looking for big tractor performance in a compact one.

Pros

Cons

Cap640

From: Freeport, OH, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5