×
Quick Used Equipment Filter












used search tag
0
Total: $0.00
    Nothing In Your Cart...
Go to Cart

See All Locations

3025E

Compact Utility Tractor
3-series-compact-tractors

  • Standard four-wheel drive (4WD) for maximum traction
  • Tightest turning radius in its horsepower class
  • Hydro transmission with Twin Touch™ pedals for ease of use

Apply For FinancingBuy OnlineMaintenance Plans

Pricing excludes attachments


View Product Brochure
10 Year Warranty Details



Features



Specifications


Compare the specifications of up to 4 models

Key Specs 3025e
Current Model
Engine power (gross)SAE J1995 rated power: 18.2 kW
24.4 hp
24.7 PS at 2400 rpm
Power take-off (PTO) power13 kW
17.4 hp
Steering hydraulics15 L/min
4 gpm
Implement hydraulics20.2 L/min
5.3 gpm
Hitch typeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb
Standard transmission; forward/reverseHydrostatic transmission (HST)
Cruise controlOptional
Approximate shipping weight (open-station; cab)Open operator station (OOS): 1181 kg
2603 lb
Cab: Not applicable
Wheelbase1593 mm
62.7 in.
Engine
FamilyEYDXL1.64NDA
FYDXL1.64NDA
GYDXL1.64NDA
ManufacturerYanmar
Engine model3TNV88F-EPJT2
Engine power (gross)SAE J1995 rated power: 18.2 kW
24.4 hp
24.7 PS at 2400 rpm
Power take-off (PTO) power13 kW
17.4 hp
Rated engine speed2400 rpm
TypeDiesel
Injection pump typeDirect injection
AspirationNatural
Emissions complianceFinal Tier 4
Cylinders/displacement3 / 1.64 L
3 / 100.2 cu in.
Number of cylindersThree
Cylinder linersCast-in-block
Bore and stroke88 x 90 mm
3.46 x 3.54 in.
Compression ratio19.1:1
LubricationPressurized
Cooling systemWater pump
Air cleanerDual element
Engine torque at rated speed72.4 Nm
53.4 lb-ft
Fuel tank capacity28.5 L
7.5 U.S. gal.
Electrical
Battery size500 CCA
Alternator (12-V)55 amp
Starter size1.4 kW
1.9 hp
Fuel system
TypeDirect injection
Fuel consumption
Transmission
Standard transmission; forward/reverseHydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverserNo
Transmission gear ranges
Final driveSpur gear
BrakesWet disk
SteeringPower steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacityFront
880 kg
1940 lb
Rear
1200 kg
2645 lb
CreeperNo
Cruise controlOptional
Differential lockYes
Drawbar maximum vertical load
Hydraulics
TypeOpen center
Pump rated outputSteering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump typeDual gear
Maximum operating pressure172 bar
2495 psi
Draft control sensingPosition control
Remote control valves availableUp to two (optional)
3-point hitch
TypeCategory 1
Lift capacity, 24-in. behind link arms615 kg
1356 lb
Power take-off (PTO)
StandardRear - 540 rpm
Optional
ControlIndependent
ClutchWet disk
Brake (for mid and rear PTO)Wet disk
Engagement method
Fluid capacities
Crankcase with filter4.5 L
4.8 qt
Transmission and hydraulic system20.8 L
22 qt
Final drive
TypeSpur gear
Differential lock
Operator station
Rollover protective structureType
Foldable
Platform - flat/straddleStraddle
Gear shift location - console/floorLeft-hand side
Cab
Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment
Dimensions
Height
Wheelbase1593 mm
62.7 in.
Front axle clearanceMinimum: 299 mm
11.8 in.
Maximum: 333 mm
13.1 in.
Turning radius with brakes
Turning radius without brakes2.9 m
9.4 ft
Limited slip differential
Approximate shipping weight (open-station; cab)OOS: 1181 kg
2603 lb
Cab: Not applicable
Tires
FrontR1 Bar: 7-14
R3 Turf: 27x8.5-15
R4 Industrial: 25x8.5-14
R4 Industrial: 27x8.5-15
RearR1 Bar: 11.2-24
R3 Turf: 41x14-20
R4 Industrial: 15-19.5
R4 Industrial: 43x16-20
Front tread range
Rear tread spacing
Miscellaneous
Toolbox
Tilt steering wheel
12-V Outlet

Accessories and Attachments

Ballast Box

Ballast boxBallast box
Ballast box with 3E TractorBallast box with 3E Tractor

A ballast box can be used to carry additional ballast for greater tractor stability.

 

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

 
Ballast box extension 

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

 

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

Ballast box with extensionBallast box with extension

The ballast box can be used to carry additional ballast for greater tractor stability.

 

A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.

 

The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch.

 

A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.

 

The ballast box extension is only available through Parts; it is not a factory option.

Draft Link

Drawbar

Magnetic hitch pinMagnetic hitch pin

Fits John Deere lawn and garden tow behind attachments.

  • Strong magnetic grip
  • Rust resistant
  • Easy to install, secure fit
Ordering information

Customers, please contact your local John Deere dealer for availability and pricing information.

Magnetic hitch pin

Order number: LP63768

Rear Drawbar Kit - BLV10918

Engine

Engine coolant heater kitEngine coolant heater kit

Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts.

 

NOTE: It is recommended to install optional engine coolant heater, transmission oil heater, and battery heating pad (A22400P - ordered through A and I) if operating machine in temperatures below -18 ⁰C (0⁰F).

Radiator Clean Out Screen - BLV11022

Spark Arrester Screen - BLV11104

Front Wheels And Tires

25 x 8.50 - 14 (6 PR, R4 Industrial, 2 Position) Front Wheels & Tires - BLV10851

27x8.5-15 (6PR R4 Industrial 2 Position) Front Wheels & Tires - BLV10862

27x8.50-15 (6PR, R3 Turf, 2 Position) Front Wheels & Tires - BLV10849

7-14 (6PR, R1 Bar, 2 Position) Front Wheels & Tires - BLV10860

Hydraulics

#

3E Series Tractors can be equipped with a field-installed rear hydraulic remote kit, providing two additional hydraulic spools on the back of the tractor. This kit can be field installed on a tractor with a loader or without a loader.

 

The functions are completely separate from the loader. These rear remotes can be hooked up to a wide variety of implements and attachments such as the following:

  • Hydraulically angled blade
  • Hydraulically controlled chute/spout on a 3-point hitch-mounted snow blower
  • Hydraulic scarifiers on a box blade
  • Many other hydraulic rear attachments

This versatile kit gives 3E Series Tractor operators the options they desire for putting their tractors into a wide range of tasks. The first spool is equipped with a float position, giving the operator the ability to contour the landscape and improve the final grade with certain implements.

 

Please note that neither of the spools in this kit are equipped with a detent position; therefore, they should not be hooked up to anything with a motor, as the valve was not designed to be run open. It is designed for momentary, on-demand hydraulic flow such as moving a cylinder.

The approximate installation time is 1 hour to 1.5 hours.

Power beyond linkagePower beyond linkage

The power beyond kit allows access to pressurized hydraulic oil at the rear of the tractor for operating attachments equipped with an open center control valve, such as a backhoe and log splitter.

Lighting Equipment

Rear work lightRear work light

This kit provides light to the rear of the tractor for evening work.

 

For open-station tractors only, this kit contains individual light.

 

Allow 30 minutes to install.

 

NOTE: Kit includes one rear light.

NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.

NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.

#

The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.

 

NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).

 

NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).

 

NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).

#
#

 Rollover protective structure (ROPS) mounted LED work lights

An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.

This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
  
The halogen work light kit attachment is still available (LVB25546).

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

Two guards are included in each kit and are for open-operator station (OOS) tractors only.

Shown on 4000 TEN Series TractorShown on 4000 TEN Series Tractor

ROPS warning-light brush guards protect turn signal/warning lights from damage caused by low branches on trees.

For open-station tractors only.

Two guards included in each kit.

Mirrors

Miscellaneous

Attaching Hardware for Rear Wheel Weight - BM19951

Attaching Hardware for Starter Rear Wheel Weight, 60 lb for 16 in. and 19.5 in. Wheel - BM19938

Cruise Control Kit - BLV10898

Large seat coverLarge seat cover
  • Cushioned seat for extra comfort
  • Fabric coated for maximum water resistance and repellency
  • Elastic cord locks around safety sign on seat back
  • Elastic cord in bottom hem for a custom fit
  • Handy zippered storage case
Ordering information

Please contact your local John Deere dealer for availability and pricing information.

Large seat cover
Order number: LP95233

Rear License Plate Kit (Includes Light) - BLV10924

Right Hand Mirror Kit - BLV11035

Safety chain supportSafety chain support
  • Provides necessary tractor parts to accept implement safety chains
  • Attaches to tractor drawbar ahead of hitch pin
  • Order safety chain from implement section

Provide added traction in snowy and icy conditions.

Provide added traction in snowy and icy conditions.

Tractor Cover - LP95637

UmbrellaUmbrella

Provides the operator the necessary shade and protection from the elements.

  • Attaches to the tractor's rollover protective structure (ROPS)
  • For open-station tractors only

Operator's Station

CanopyCanopy

The canopy attaches to the rollover protective structure (ROPS) to protect the operator from inclement weather.

NOTE: Additional mounting brackets are required to adapt the canopy (LVB25334) to ROPS. See ordering information below.

Canopy mounting kitCanopy mounting kit

The canopy attaches to the rollover protective structure (ROPS) to protect the operator from inclement weather.

For open-station tractors only.

NOTE: Additional mounting brackets are required to adapt the canopy (LVB25334) to ROPS. See ordering information below.

Power Take-off (Pto)

Rear Wheels And Tires

11.20-24 (6PR, R1 Bar, 1 Position) Rear Wheels & Tires - BLV10854

15-19.5 (6PR, R4 Industrial, 1 Position) Rear Wheels & Tires - BLV10852

41x14-20 (4PR, R3 Turf, 1 Position) Rear Wheels & Tires - BLV10850

43x16-20 (4PR, R4 Industrial, 2 Position) Rear Wheels & Tires - BLV10988

Three-point Hitch

3-Point Hitch Tractor Receiver Hitch - LP25001

iMatch Quick Hitch Bushings - LVU12858

iMatch Quick-HitchiMatch Quick-Hitch
iMatch Quick-Hitch with 3-Point Hitch Disk HarrowiMatch Quick-Hitch with 3-Point Hitch Disk Harrow

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
 
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter of 0.76 in. to 0.77 in. (19 mm to 20 mm)
    • Outside diameter of 1.24 in. to 1.25 in. (31 mm to 32 mm)
  • Lower bushings
    • Inside diameter of 0.88 in. to 0.89 in. (22 mm to 23 mm)
    • Outside diameter of 1.43 in. to 1.44 in. (36 mm to 37 mm)
iMatch Quick-Hitch dimensions
iMatch dimensionsiMatch dimensions

 

Dimensions designated

Millimeters (minimum)

Millimeters (maximum)

'A' lower socket inside span

686.56

689.61

'B' lower socket width

27.94

29.46

'C' lower socket diameter

38.1

38.61

'D' upper hook vertical spacing 

375.41

377.96

iMatch Quick-Hitch implement geometry
iMatch implement dimensionsiMatch implement dimensions

 

Dimensions designated

Millimeters (minimum)

Millimeters (maximum)

'A' lower hitch pin or adapter outside diameter

36.33

36.58

'B' lower hitch pin inner shoulder spread

681.0

684.3

'C' lower hitch pin outer shoulder spread

750.83

753.88

'D' lower hitch pin inner/outer shoulder diameter 

50.55

63.75

'E' coupler mast pin diameter

31.50

31.75

'F' coupler mast pin vertical spacing

379.48

382.53

Transmission

Weights

Front-weight bracket-extension kitFront-weight bracket-extension kit

Allows the operator to hang up to 10 weights on the tractor and retain them securely. This kit helps maintain stability when using rear 3-point hitch implements and a loader is not installed on the tractor. Proper ballast is essential for safety and to ensure the durability of the tractor components.

Front-weight bracket-extension kitFront-weight bracket-extension kit

Allows the operator to hang up to 10 weights on the tractor and retain them securely. This kit helps maintain stability when using rear 3-point hitch implements and a loader is not installed on the tractor. Proper ballast is essential for safety and to ensure the durability of the tractor components.

Quik-Tatch Weight, 42 lb (19 kg) - UC13263

Quik-Tatch Weight, 70 lb (32 kg) - LVU32113

Rear wheel weightRear wheel weight
  • Provide additional traction and stability
  • Starter and additional weight for 15-in. wheel, 16.5-in. wheel, 17.5-in. wheel, and 19.5-in. wheel
  • Up to three weights per wheel can be added

Reviews

4.61

23 reviews

Rating Snapshot

17
4
1
1
0
4.64
4.59
4.73

Great little tractor

5/5

Able to do all the tasks I require of it . I have a bunch of different attachments that make my life easier doing projects around the house . Could do without it .

Pros

Cons

Mike3025E

From: Larkspur Colorado

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

3025E is a Great Utility Tractor

5/5

Bought my 2018 3025E last spring and got so much work done on my 16 partially wooded acres of property. I run a 5-foot brush hog with no trouble so long as I keep the ground speed reasonable. Bulling through 6 ft. grass and up to 1" brush is fairly easy. It will push over trees up to about 8" in diameter. The 300E loader picks up a heaping bucket of clay soil and stones with no difficulty. Even the convenience of being able to lay a couple 4x8 sheets of OSB board across the bucket and carry it out where I want it is great. I don't farm but maintain a couple food plots for deer. This tractor is perfect for that.

Pros

Cons

Deckard

From: West Michigan

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Love my little tractor.

5/5

I have had my tractor for almost 5 years now and I still love it. I don't have a lot of land but I did want to do some clearing and also needed a loader. I bought the 3025E for the price range. Obviously there are features that come on the more expensive models but you pay for those things and price was an issue for me. I have over 700 hours on it and it does pretty much every thing I ask. Plus there are a lot of things I used to have to do manually that I can do with the tractor(lift stuff into the back of my truck). It has been a great little tractor and I would recommend it to anyone who understands how every tractor has limits. My wife says I have to have my "tractor time" for therapy and it really is true. Love it.

Pros

Cons

Jerry6514

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

A disappointment!

2/5

Purchased and finally took delivery in July 2022 after waiting six weeks for the Mechanical Self-Leveling loader to come in. The 3025E seems to be underpowered and the loader with it's lack of "full curl" like the Non-Self Leveling variant is a disappointment. Was hoping for more. However, with no MSL loaders available on dealers' lots and lack of sales knowledge, it's a shot in the dark and unfortunately isn't shared by Deere anywhere on their website or in their videos. About the only plus on this loader when using pallet forks, it keeps your load level. But using the bucket and attempting to scoop a full load of material, it's not achievable. My dealership has attempted to help but claims there is nothing wrong with the product.

Pros

Cons

jel318

From: TX

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Intermediate

3
2
5

Little tractor big performance

5/5

I have owned a 3025e for a year now. This little tractor has been great. For a small tractor it will do some big jobs. Pallet forks are a must have for this tractor. When they say it will pickup 1,200 pounds it will and then some. Hands down one of the best purchases of my life.

Pros

Cons

Will the farm man

From: Pallmall tn

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Best Tractor On The Market For Woodland Work

5/5

I recently purchased my Deere 3025E from TriGreen in Winchester, TN outfitted with the Brush Crusher 4200, & Frontier box blade, & liquid ballast in the rear tires. This thing is a beast! I've moved several 8ft-12ft oak & pine logs with an average diameter of approx. 22 inches with ease...I mean, the thing doesn't grunt or show signs of stress at all with those logs. Pulled up a stump that I've been trying to dig out with a shovel, & this thing popped it out of the ground like a rag doll. This thing has a slimmer profile, & the turning radius is amazing so I can really work my way through the woods with ease. I can maneuver this thing into tighter places than my Honda Rancher ATV if you can understand what I mean. Yes, the ATV is smaller, but the tractor can be gently maneuvered in and out of spots that look impossible. If you are dealing with logs, wood, brush etc. you will DEFINITELY appreciate the plastic fenders and hood. It's the same type of quality plastic you'll find on any ATV body. There is a reason they use plastic on these machines that are running and working in the woods. I received the tractor, lift bucket, grapple, & box blade for a better price than any other brand of tractor out there, & I test drove them all. It's a John Deere-holds it value better than any other brand in the market, & the parts/dealer network is the best in the US obviously. The decision was easy for me, & I'm glad I added this tractor to our family.

Pros

Cons

DannyB

From: Tracy City, TN

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

Good tractor

5/5

Got 8 acres. Does everything i need well. Brush Hog, bucket, and loader work well. Handles full bucket of gravel or dirt well. Mower cuts nice too. Runs like a top

Pros

Cons

BVANZ

From: Oregon

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

Good Tractor

5/5

It is a little light for brush hogging high grass. But you have to understand, get the right tractor for what it's designed for. You don't brush hog 18" of grass with a 24hp tractor. It was not designed for that. You will bog down the engine just like anything else that gets overloaded. If you are doing a lot of brush hogging in high grass, get a 65hp 4 series with a flexwing mower. But overall, it does just about everything that I need. The lift capacity of the front end loader is pretty good but you have to be careful. You can easily overload it. If you need to do heavy lifting, get the right tractor for your needs. But for what I use it for, it's a great little tractor. I have a 60" finish mower that I use on 3.5 acres. The finish mower does an excellent job. As with any mower, make sure the blades are sharp. Don't sell this tractor short. It has a lot of potential and capabilities. But do your homework first and make sure it's right for what you are going to use it for. I see so many posted CON's where an item is being used beyond it's capabilities. If your using this tractor or any tractor for what it was not designed for, don't post CON's. Only post CON's if it does not perform to it's capabilities.

Pros

Cons

colonial

From: South texas

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Fantastic value

5/5

We have been needing a tractor with a brush mower, kept looking around for several years now. Did some research and as far as value and warranty for the money, this was the tractor to get. Came with the front loader, added a 5ft rotary (brush) mower and the wife and I are extremely happy with this purchase. We've only had the tractor for a few weeks now, but have gotten so much more done on our property in those few weeks that would have taken much much longer without it. Have projects lined up to do ourselves now that we have it. Even got my youngest daughter using it as well.

Pros

  • size
  • hydrostatic transmission
  • front loader
  • 4wd
  • warranty support
  • dealer support
  • ability

Cons

  • none

Dasfaust

From: Burkburnett, TX

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Best value you will find

5/5

We have larger tractors for the farm but I needed something smaller to haul around and use in residential yards. The 3025 is perfect size. It’s big enough to do stuff but small enough to tow with a half ton p/up. Take care of it and it will hold its value better than any other brand. Get 32 inch pallet forks and add two more forks for brush and save your money on a grapple. It’s amazing what All you can do with this setup and this tractor.

Pros

  • no emission junk
  • foldable rops
  • resale value
  • perfect size

Cons

  • hydrostat not as good as gear for field work

Getitdone

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Weekly

Level of Expertise: Expert

5
2
5

Very pleased

5/5

I have had this tractor for 2.5 years (2017 model) I have put on nearly 200 hours. It has been 100% reliable and is perfect for what I need it for. I have a 5 ft rotary cutter and a box blade. Between these and the bucket you can get a lot of work done. Simple to operate and gets the job done.

Pros

Cons

Cnote

From: North florida

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Beginner

4
2
5

Great machine with exceptional capabilities

5/5

I purchased my 3025E in May, 2017. I have owned it for 2.5 years now and it has been absolutely reliable. Not a single trip back to the dealership, and no on site service calls. I use my tractor almost on a daily basis. As of today it has 536.1 hours on it. I got the loader, 60 rotory cutter, 60" box scrap, and a used 48 King Kutter BX roto tiller. I have seen complaints about lack of PTO HP, but that hasn't been my experience with my tractor. I also picked up a used Woods RM59 finish mower, no issues running that either. This is my first tractor, and after doing much research and visiting other dealerships before my purchase, I'm very happy that I went with JD.

Pros

  • extremely capable machine.
  • very fuel efficient.

Cons

Steveo62

From: Anderson, MO

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

0
2
5

Low Pto power, bogs down when shredding field

4/5

Ive had my 3025 for about 6 months now. My field is about 6 acres. If you are going to use this to shred (I have the 60" frontier cutter that came with the pkg) I would definitely recommend gettting the 3032 or 3037. The 25 hp from the 3025 with about 17 hp to the pto just dont cut it. No pun intended. Seriously, the tractor bogs down bad. You have to go very slow, foot barely on the pedal, or the pto rpm drops way down. Or even stop moving forward for a few seconds to let it speed back up. Grass height was about 18" first cutting but only about 10" second cutting. I was going to get a 3032 or 3037 but a guy at work told me all new tractors over 25 up now had the exhaust requirement of recycling or soot burning (or whatever) cycle and the exhaust systems were always getting plugged. I talked to john deere and they said the cycle goes well with no exhaust system problems as long as you used low sulfur diesel, which is what you get at the gas station. But they also told me the 3025 would handle that field with no problems. Untrue. It takes me 10-12 hours to mow 6 acres when other tractors have mowed it in 2 or 3. Spend the extra 2000-3000 dollars and get the 3032 or 3037 . you'll be glad u did.

Pros

  • compact ease of use

Cons

  • low pto power cutter bogs down

KEVINh

From: Texas

Length of Ownership: 6months

Usage Frequency: Monthly

Level of Expertise: Intermediate

4
2
5

Disappointed in the amount of plastic on tractor

3/5

The tractor performs very well (the 3025e). The layout of the instrument panel is easy to use. The seat is comfortable. The tractor is quiet running and starts with no problem. The disappointing part is the amount of plastic that is used on this tractor. It is a constant concern. Fearing that it will not hold up as well as metal. Extremely disappointed that be lights are mounted on the outside of the roll bar and are easily broken off. Again made of plastic and extremely expensive to replace. It would have been nice had a cage been made for the lights or for them to be built into the frame. With the amount that the Tractor cost, I expected to see less plastic on it. This is my first John Deere tractor purchase. Sad to say, even though the tractor performs well .I will not again spend so much money for so much plastic.

Pros

  • nice little tractor for a small parcel of land

Cons

  • too plastic and poor caution light mount and locat

TREEcutter18

From: Tallahassee florida

Length of Ownership: 1month

Usage Frequency: Daily

Level of Expertise: Intermediate

3
2
5

good tractor - 3025E needs more hp to the PTO

4/5

I purchased a 3025E MFWD, with 300E loader on 6/21/2019. The overall quality of the tractor is great, well built & I LIKE the plastic body panels vs sheet metal (safer from small hits, metal & plastic will be equally damaged with big hits) my dealer - Virginia Tractor - ordered with the telescoping links on the hitch and with draw bar installed. Also had the rear-mounted fuel tank with gauge (I was anticipating the fuel tank under the hood). Cutting thick tall grass w/60 in finish mower (new blades), tractor really bogged down, had to cut VERY slow in L gear. The 3025E has a dash display w/PTO RPM & mine cont’d to drop from 540RPM to low 400s and I let off pedal. Attachments brochure from JD suggests the MX5 & RC2072 but I'm a little skeptical of after the performance of the 60 in finish mower. Too much power loss to PTO due to Hydro transmission. I used my JD770 gear drive w/5 ft bush hog on hilly ground w/heavy brush, it worked VERY WELL. I will have to try my 5 ft bush hog behind the 3025E for comparison, but i'm very skeptical that the 3025E will be sub-par. After one use I am having buyer's remorse because of not going a step up for more HP or Gear Drive. I think this tractor will be great for moving snow & other basic tasks on flat ground; probably even good for a pull behind finish mower as long as I don't let the grass get too tall (or smaller 48 in mower)

Pros

  • nice instrumentation
  • comfortable seat/platform

Cons

  • pto hp lacking

BOB73GREENFAN

From: Stuarts Draft, va

Length of Ownership: 1month

Usage Frequency: Monthly

Level of Expertise: Expert

5
2
5

Great implement

4/5

I purchased a 3025E with loader in November of 2018, after buying 5 acres, 5 barns and an old farm house that would eventually be torn down. I also bought an auger, rotary cutter (bush hog), box scraper, pallet forks and receiver hitch. I had to finally buy and IMatch Quick Hitch. It greatly simplified hooking up every accessory. Since purchasing the tractor I’ve taken out 250’ of box hedge/900’ of fence row, cleaned out 3 of the 5 barns, leveled 1300’ of gravel road/driveway, continually mow 3 to 4 acres and I’ve dug several post holes. The tractor and all the implements have functioned flawlessly after 95 hours and 5 months. Sales, Parts and Service at TriGreen Equipment in Decherd, TN have been fantastic, from the initial purchase thru parts purchase, advice, assistance and service. Thank you John Deere for a superb tractor and accessories!!

Pros

  • ease of operation
  • fuel efficiency
  • serviceability
  • not very noisy

Cons

  • pto shaft can be difficult to connect

Dadah333

From: Winchester, TN

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Intermediate

4
2
5

JD 3025E after 350 hours

5/5

Great little tractor, should have bought one years ago. It has its limits, but I have put it through the ringer. Almost a daily user, easy to transport. Front bucket has been a life saver. Added finish mower for around the barn, pond. Scrape blade, 2 bottom plow, cultivator and forks. WR Long 3rd function and grapple. Grapple is the real deal. After the storm here in NC with trees down, dealing with the limbs, brush was a breeze.

Pros

Cons

Eddie7556

From: Asheboro,NC

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Surprising Capability

5/5

Great little tractor for the money!! I am surprised at the amount of work that can be done with this tractor. The loader works great, I also bought pallet fork attachment which I use as much as the loader. Great for lifting logs or big items to move around. Cranks easy, runs great with the hydro control pedals and power steering. Cant go wrong with this tractor is you are a homeowner with a need for a great working yard tractor.

Pros

Cons

KBD4821

From: Dawsonville GA

Length of Ownership: 6months

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5

Great tractor, ok loader

5/5

I bought my 3025e with the D160 loader brand new in December 2017, so i have almost had it a year and i just hit the 200 hour mark. For the most part, I love this tractor! I upgraded from a 1025r and it was well worth the trade in. My reason for trading in had nothing to do with the 1025r not being good, i just moved to a much larger property with different needs that the 1025r no longer met. I have a 25 acre hobby farm that i use the tractor on. I have about 10 acres of open fields that i use a rotary cutter on and it handles a 60" just fine. I also have a large 2 acre garden that it did a great job tilling in the spring and cultivating during the growing season. I also have the PTO spreader that i use to put fertilizer on my garden and winter cover crop seed down and it did great with that too. I have only had to do basic maintenance on the tractor so far but it is VERY easy to work on, and that is coming from someone who is just starting to work on equipment. My only complaint so far is the same as another reviewer: the D160 loader. The bucket will not stay curled back in position. Now my dealer did come out and work on it, and it improved drastically, but it still bounces around, especially with really heavy loads. For me, i just tap the curl back function on the controller whenever i am transporting something for any distance. I wish it didn't do it at all, but if this is the only issue, after they kinda fixed it, its something i can live with.

Pros

  • good bang for your buck
  • easy to maintain
  • plenty of power for a 25hp
  • easy to use

Cons

  • loader could be better
  • sometimes wish i had gotten the 3038e for more pto

FarmerDan14

From: NC

Length of Ownership: 1yearOrLonger

Usage Frequency: Daily

Level of Expertise: Intermediate

5
2
5

Right size for most jobs

4/5

I am very happy with the tractor and FEl for the most part, the tractor does everything I want and more, the FEL bucket material is weak and thin, could be built a little heavier I bent the bucket messing round with a small stump about 4 in diameter. And as another reviewer stated the fel does bounce a lot, I have greased the pins but it still seems to have a lot of play in them. other than that I love this tractor just wished I had a few more attachments

Pros

Cons

CBailey

From:

Length of Ownership: 1yearOrLonger

Usage Frequency: Monthly

Level of Expertise: Beginner

4
2
5

Pays its own way

5/5

I bought my 3025e last fall. Monthly I get enough small jobs to make the tractor payment. I use a 5ft rotary cutter, 6ft finish mower, 5ft box blade, all with ease. Best investment I have made in a long while.

Pros

  • affordable
  • compact
  • easy to operate

Cons

RavinFarmin

From: Independence, VA 24348, USA

Length of Ownership: 6months

Usage Frequency: Daily

Level of Expertise: Expert

5
2
5

Great small tractor

5/5

I have 11 acres and have used this tractor to bush hog, move big rocks, and move large downed trees. My dealer talked me down from a bigger model and I was doubtful but have rarely had to put the hydrostat into low gear and this little, easy to maneuver tractor has not come close to letting me down. If you need more tractor then you probably need a dozer and all I can say is this is an unbelievably simple and perfect tractor.

Pros

Cons

Ben0407

From:

Length of Ownership: 3months

Usage Frequency: Weekly

Level of Expertise: Beginner

5
2
5

Excellent Build Quality

5/5

Coming from a Mahindra the 3025e is an excellent machine. All the operator controls are very ergonomic and everything about the machine has a premium feel. The loader controls are very responsive but not too touchy and cycle times are quick!

Pros

  • hydrostatic
  • excellent fit and finish
  • smooth engine
  • differential lock
  • 4 wheel drive
  • no def
  • responsive loader

Cons

  • it wasn't free

Corey

From: Piedmont, AL 36272, USA

Length of Ownership: 1week

Usage Frequency: Weekly

Level of Expertise: Intermediate

5
2
5