Features
Specifications
Accessories and Attachments
Ag Management Solutions
Beacon Lighting
The rotary beacon light is installed to meet requirements in commercial or governmental applications. The rotating, high-intensity light rests securely within an amber-colored safety lens. Both the light and lens are replaceable if damaged.
The rotary beacon light features a fully adjustable, double-clamp design that provides a more rigid vertical support stem.
The rotary beacon light is installed to meet requirements in commercial or governmental applications. The rotating, high-intensity light rests securely within an amber-colored safety lens. Both the light and lens are replaceable if damaged.
The rotary beacon light features a fully adjustable, double-clamp design that provides a more rigid vertical support stem.
Cab Equipment
Optional right-hand window wiper with washer fluid is available on standard and premium cabs. This option allows the operator to clean the window in dusty conditions from the comfort of the cab. The windshield wiper fluid tank is located on the operator platform near the front of the cab.
Cab Operator's Station
Block distractions out of the left side window of select tractor and sprayer cabs. The left-side sun shade bracket allows producers to mount their choice of two different sized sun shades to the cab door. The shade system design allows operators to block light and heat from the sun while not obstructing the cab entrance and exit access. The bracket kit is compatible with existing sun shades for a matched look in the cab with quality and features users are already comfortable with.
- Block light from the sun and from high-intensity work lights at night
- Reduce summer heat from direct sun
- Sun shade options match the current interior (also orderable)
Commandview Iii Cab
This optional cross-gate joystick replaces fingertip paddle pots for control of selective control valves (SCVs) and allows for programmable hydraulic functionality according to operator preference.
Drawbar
Regular drawbar support with drawbar reinforcement kit.
Drawbar reinforcement kits are designed to handle heavy vertical loads such as large drawn planters, grain carts, trailer tanks, and large drawn rippers. Drawbar reinforcement kits should be used when the maximum static vertical load on the drawbar exceeds 4500 lb (2041 kg) on 9020 Series Tractors and 5450 lb (2472 kg) on 9030 and 9R Series Tractors equipped with a Category 4 drawbar.
9510R and 9560R Wheel and Track Tractors have Category 5 drawbars as base equipment and have a 10,100-lb (4581-kg) static vertical load capacity. Installation of the drawbar reinforcement kit raises the maximum static vertical load, depending on the type of drawbar support on the tractor, to the values show in the table below.
Drawbar category | Drawbar support | Drawbar position | Vertical load rating | Tractor offered on – W/T |
Category 4 | Std. HD Wide-swing | Short Long Short | 5450 lb 5000 lb 5450 lb | W – 9360R - 9460R 9460RT T – 9460RT |
Category 4 with | HD | Short | 11000 lb | T/W – 9630R-9460R, 9460RT |
Category 5 | HD* | Short | 10100 lb | T/W - 9510R,9560R,9510RT |
*Category 5 drawbar with heavy-duty support is used on 9R Series Wheel and Track Tractors equipped with a hitch and for 9RT Series Tractors ordered with a non-swinging drawbar.
Regular drawbar support with drawbar reinforcement kit.
Drawbar reinforcement kits are designed to handle heavy vertical loads such as large drawn planters, grain carts, trailer tanks, and large drawn rippers. Drawbar reinforcement kits should be used when the maximum static vertical load on the drawbar exceeds 4500 lb (2041 kg) on 9020 Series Tractors and 5450 lb (2472 kg) on 9030 and 9R Series Tractors equipped with a Category 4 drawbar.
9510R and 9560R Wheel and Track Tractors have Category 5 drawbars as base equipment and have a 10,100-lb (4581-kg) static vertical load capacity. Installation of the drawbar reinforcement kit raises the maximum static vertical load, depending on the type of drawbar support on the tractor, to the values show in the table below.
Drawbar category | Drawbar support | Drawbar position | Vertical load rating | Tractor offered on – W/T |
Category 4 | Std. HD Wide-swing | Short Long Short | 5450 lb 5000 lb 5450 lb | W – 9360R - 9460R 9460RT T – 9460RT |
Category 4 with | HD | Short | 11000 lb | T/W – 9630R-9460R, 9460RT |
Category 5 | HD* | Short | 10100 lb | T/W - 9510R,9560R,9510RT |
*Category 5 drawbar with heavy-duty support is used on 9R Series Wheel and Track Tractors equipped with a hitch and for 9RT Series Tractors ordered with a non-swinging drawbar.
Drawbar reinforcement kits are designed to handle heavy vertical loads such as large drawn planters, grain carts, trailer tanks, and large drawn rippers. Drawbar reinforcement kits should be used when the maximum static vertical load on the drawbar exceeds 2268 kg (5000 lb). Reinforcement kits are positioned below the drawbar and can be added to Category 4 drawbars with a heavy-duty drawbar support only.
Installation of the drawbar reinforcement kit raises the maximum static vertical load to the values shown in the table below.
NOTE: Reinforcement kits cannot be added to Category 5 drawbars.
Drawbar position | Maximum static vertical load |
Short drawbar position | 4990 kg (11,000 lb) |
Long drawbar position | 4082 kg (9000 lb) |
Drawbar category | Drawbar support | Drawbar position | Vertical load rating | Tractor offered on – wheels (W) / tracks (T) |
|
|
|
|
|
Category 4 | Standard | Short | 5,450 lb | 9370R - 9470R |
|
| Long | 5,000 lb | 9370R - 9470R |
|
|
|
|
|
Category 4 | Heavy duty | Short | 5,450 lb | 9370R - 9470R, 9470RT |
|
| Long | 5,000 lb | 9370R - 9470R, 9470RT |
|
|
|
|
|
Category 4 with drawbar reinforcement kit | Heavy duty | Short | 11,000 lb | 9370R - 9470R, 9470RT |
|
| Long | 9,000 lb | 9370R - 9470R, 9470RT |
|
|
|
|
|
Category 5 | Heavy duty | Short | 10,100 lb | 9520R - 9620R, 9520RT, 9570RT |
|
|
|
|
|
Category 5 wide swing | Wide swing | Short | 10,100 lb | 9520RT, 9570RT |
| Wide swing with high capacity kit | Short | 12,000 lb | 9520RT, 9570RT |
|
|
|
|
|
*Category 5 drawbar with heavy-duty support is used on 9R Series Wheel and Track Tractors equipped with a 3-point hitch and for 9RT Series Tractors ordered with a non-swinging drawbar.
Drawbar And Trailer Hitch
Electrical Equipment
Available as either a factory- or field-installed attachment, the battery disconnect switch is used to disconnect the batteries in preparation for 20-day to 90-day storage periods. The switch cuts the power to the entire tractor to aid in maintaining battery life.
An indicator light allows for safe and proper disconnect. The light will flash until it is safe to disconnect. This allows the diesel exhaust fluid (DEF) tank and lines to purge. (Final Tier 4 has an indicator light and Interim Tier 4 has no indicator light.)
Cummins is a trademark of Cummins Incorporated.
The ISO cab implement controller area network (CAN) bus adapter is available to connect any ISO compliant implement or device to an 8R, 8RT, 9R, 9RT, 9RX (including Scraper Special) Series Tractor. These connectors are commonly used for planter frame control boxes.
Refer to the operator's manual, sections 16 (CommandCenter™) and 25 (Operator Station), for additional information on ISO implements.
NOTE: If the harness is not in use, unplug it from the ISO 11783 location or plug the 4-pin connectors together on the harness. If neither of these are done, implement CAN communication errors will occur.
In today’s agricultural environment, accuracy and precision are more important than ever. For something as basic as ground speed, operators need key information for precise control of various implements and the tractor. To support these needs, tractors can be ordered with a dual-beam radar unit as a factory- or field-installed option.
There are several key features that have changed from previous designs.
First, there are two horns for exit of the radio beam. This dual-beam design assures a powerful and accurate signal that will cut through interference that at times makes single-beam units inaccurate. (See 1 in the image above for beam locations.) Dual-beam output makes radar less susceptible to hard surface or tall/wavy grass interference.
Accuracy is aided by a heavy-gauge mounting bracket and rubber isolators that reduce chances that vibration can affect the radio signal.
Dual-beam radar has a fast update rate. When the tractor comes to a stop, accelerates, or varies speed, the indicated ground speed on the tractor display will closely match the actual ground speed. This is important for implements that use radar speed to control operation such as planters, seeders, fertilizer applicators, and sprayers.
In addition, the dual-beam radar does not require calibration to assure accuracy. Its self-calibrating ability is sure to save setup time by elimination of a special procedure that was required in the past.
The radar true ground speed sensor activates the following CommandCenterTM display or performance monitor readouts:
- Percent slip
- Hitch slip command (if equipped)
Radar usage improves the accuracy of the following CommandCenter or performance monitor functions:
- Area covered
- Area/hour
- Distance and ground speed
Dual-beam units are compatible with controller area network (CAN) bus and International Organization for Standardization (ISO) bus electrical systems.
In today’s agricultural environment, accuracy and precision are more important than ever. For something as basic as ground speed, operators need key information for precise control of various implements and the tractor. To support these needs, tractors can be ordered with a dual-beam radar unit as a factory- or field-installed option.
There are several key features that have changed from previous designs.
First, there are two horns for exit of the radio beam. This dual-beam design assures a powerful and accurate signal that will cut through interference that at times makes single-beam units inaccurate. (See 1 in the image above for beam locations.) Dual-beam output makes radar less susceptible to hard surface or tall/wavy grass interference.
Accuracy is aided by a heavy-gauge mounting bracket and rubber isolators that reduce chances that vibration can affect the radio signal.
Dual-beam radar has a fast update rate. When the tractor comes to a stop, accelerates, or varies speed, the indicated ground speed on the tractor display will closely match the actual ground speed. This is important for implements that use radar speed to control operation such as planters, seeders, fertilizer applicators, and sprayers.
In addition, the dual-beam radar does not require calibration to assure accuracy. Its self-calibrating ability is sure to save setup time by elimination of a special procedure that was required in the past.
The radar true ground speed sensor activates the following CommandCenterTM display or performance monitor readouts:
- Percent slip
- Hitch slip command (if equipped)
Radar usage improves the accuracy of the following CommandCenter or performance monitor functions:
- Area covered
- Area/hour
- Distance and ground speed
Dual-beam units are compatible with controller area network (CAN) bus and International Organization for Standardization (ISO) bus electrical systems.
Engine
Fuel/Water Separator Kit, Severe Duty - BRE10235
Fuel/Water Separator Kit, Severe Duty, Wheel and Tracks - BRE10228
Fuel/Water Separator Kit, Severe Duty, Wheel and Tracks - BRE10234
Fuel/Water Separator Kit, Severe Duty, Wheel and Tracks - BRE10233
Front Weights
Front idler weights allow for increased ballasting opportunities on 9030 Series Track Tractors. Front idler weights allow for more weight to be distributed across the front idlers to help offset weight that is on the rear of the tractor.
Front Weight Bracket, Tracks - BRE10121
Hydraulic Selective Control Valves (Scvs)
For implements that require high hydraulic flow, 19-mm (3/4-in.) couplers are available in two configurations.
A single 19-mm (3/4-in.) selective control valve (SCV) coupler is available as a field-installed attachment for dual-pump, 435-L/min (115-gpm) hydraulic systems.
Hydraulic Intelligent Power Management (IPM) with three 19-mm (3/4-in.) and five 12.7-mm (1/2-in.) SCV couplers are available as a factory- or field-installed attachment on 9620R and 9620RX Tractors equipped with dual-pump, 435-L/min (115-gpm) hydraulic systems.
7th and 8th Remote Selective Control Valve - BRE10064
Add the functionality of two additional rear SCV controls for high-flow hydraulic systems. This kit allows the tractor to be configured with up to eight SCVs (two stacks of four SCV blocks). Also order parts are required to configure the operator station with touch controls as well as software.
The field-installed electronic SCV kits are made available for tractors needing additional SCVs. These kits provide metered flow rates and timed detents with pressure and load sense compensation. The additional SCV(s) can also be integrated into the Headland Management System.
The field-installed kit includes International Organization for Standardization (ISO) lever-assisted breakaway couplers and armrest control lever.
Hydraulics
Lift assist wheels are often used with heavy 3-point-hitch-mounted implements. The hitch auxiliary raise kit provides hydraulic power for use with the lift assist wheels. Turning and transport are made easier using this feature.
Easy hookup of planters and other implements
Attaching implement hydraulic hoses to locations on the tractor other than into an SCV has always been a challenge to know what kits are required for compatibility. Getting them installed in a timely manner can at times be confusing and time consuming.
To assist in making hookup to large planters, seeders, and harvesting equipment where multiple connections are required, there are now factory-installed auxiliary hydraulic couplers on wheel tractors.
Auxiliary sump coupler
For applications requiring low return oil back pressure (10 psi or less), the sump coupler kit allows oil to return directly to reservoir (differential case) from hydraulic motor, bypassing the remote coupler and SCV. When connecting motor case or seal return hose to coupler, make sure hose end and coupler are clean.
This coupler is required for correct attachment to current-production seeding products with case drain lines.
Hydraulic motor return couplers
The hydraulic motor return couplers can be used as a coupler for return oil flow, from hydraulic orbital motors and other devices, to the tractor's low-pressure return port, labeled ''R'' on the tractor.
Use of this connector specifically in the return to sump port position is for hydraulic components that require a ''leak-off line'' connection to the tractor. Components and implements that require this typically are larger orbital motors that require a drain for seal protection. The connector in the sump port is not to be used to carry return flow from a function to the tractor.
Power beyond couplers
Power beyond provides live hydraulic power to equipment. This kit supplies oil pressure to implements when the engine is running.
Any implement using power beyond must have a way to control oil flow. Use an independent control valve that is pressure and flow compensating (supplied separately) to control the oil flow rate from this coupler set.
The auxiliary hydraulic optional equipment includes the following:
A - Power beyond couplers
B - Hydraulic motor return couplers
C - Motor seal drain kit
D - Load sense coupler
NOTE: RE151894 and RE67182 cannot be used together.
Easy hookup of planters and other implements
Attaching implement hydraulic hoses to locations on the tractor other than into an SCV has always been a challenge to know what kits are required for compatibility. Getting them installed in a timely manner can at times be confusing and time consuming.
To assist in making hookup to large planters, seeders, and harvesting equipment where multiple connections are required, there are now factory-installed auxiliary hydraulic couplers on wheel tractors.
Auxiliary sump coupler
For applications requiring low return oil back pressure (10 psi or less), the sump coupler kit allows oil to return directly to reservoir (differential case) from hydraulic motor, bypassing the remote coupler and SCV. When connecting motor case or seal return hose to coupler, make sure hose end and coupler are clean.
This coupler is required for correct attachment to current-production seeding products with case drain lines.
Hydraulic motor return couplers
The hydraulic motor return couplers can be used as a coupler for return oil flow, from hydraulic orbital motors and other devices, to the tractor's low-pressure return port, labeled ''R'' on the tractor.
Use of this connector specifically in the return to sump port position is for hydraulic components that require a ''leak-off line'' connection to the tractor. Components and implements that require this typically are larger orbital motors that require a drain for seal protection. The connector in the sump port is not to be used to carry return flow from a function to the tractor.
Power beyond couplers
Power beyond provides live hydraulic power to equipment. This kit supplies oil pressure to implements when the engine is running.
Any implement using power beyond must have a way to control oil flow. Use an independent control valve that is pressure and flow compensating (supplied separately) to control the oil flow rate from this coupler set.
The auxiliary hydraulic optional equipment includes the following:
A - Power beyond couplers
B - Hydraulic motor return couplers
C - Motor seal drain kit
D - Load sense coupler
NOTE: RE151894 and RE67182 cannot be used together.
Easy hookup of planters and other implements
Attaching implement hydraulic hoses to locations on the tractor other than into an SCV has always been a challenge to know what kits are required for compatibility. Getting them installed in a timely manner can at times be confusing and time consuming.
To assist in making hookup to large planters, seeders, and harvesting equipment where multiple connections are required, there are now factory-installed auxiliary hydraulic couplers on wheel tractors.
Auxiliary sump coupler
For applications requiring low return oil back pressure (10 psi or less), the sump coupler kit allows oil to return directly to reservoir (differential case) from hydraulic motor, bypassing the remote coupler and SCV. When connecting motor case or seal return hose to coupler, make sure hose end and coupler are clean.
This coupler is required for correct attachment to current-production seeding products with case drain lines.
Hydraulic motor return couplers
The hydraulic motor return couplers can be used as a coupler for return oil flow, from hydraulic orbital motors and other devices, to the tractor's low-pressure return port, labeled ''R'' on the tractor.
Use of this connector specifically in the return to sump port position is for hydraulic components that require a ''leak-off line'' connection to the tractor. Components and implements that require this typically are larger orbital motors that require a drain for seal protection. The connector in the sump port is not to be used to carry return flow from a function to the tractor.
Power beyond couplers
Power beyond provides live hydraulic power to equipment. This kit supplies oil pressure to implements when the engine is running.
Any implement using power beyond must have a way to control oil flow. Use an independent control valve that is pressure and flow compensating (supplied separately) to control the oil flow rate from this coupler set.
The auxiliary hydraulic optional equipment includes the following:
A - Power beyond couplers
B - Hydraulic motor return couplers
C - Motor seal drain kit
D - Load sense coupler
NOTE: RE151894 and RE67182 cannot be used together.
Lighting
A rear fender rear facing work light is available for your tractor. The kit comes with mounting hardware and a harness which directly connects to your tractors existing harness.
This mounting location allows for illumination of your hitch and drawbar area to aid on making connections to your implement with natural lighting conditions are poor.
Miscellaneous
Mounting brackets are available to mount a standard ABC extinguisher to your tractor. The bracket mounts to the entrance platform at the top of the entrance/egress steps on 9R series tractors.
This location allows quick access to the extinguisher near the cab door, should it ever be needed.
Custom key door locks
Field-installed kit (AL71345) allows for a door handle to be installed that has a key different from the tractor ignition key.
Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.
Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.
RAM is a trademark of National Products Inc.
The front tow cable is recommended for pulling all 9 Family Tractors in time of needed assistance. Tow cables are available as a factory-installed option on all ag tractors and are base equipment on all Scraper Special Tractors. The tow cable attaches to the area in front of the drawbar and is also available as a field-installed option.
Noncurrent attachment
Note: This is a noncurrent kit. The information provided is valid for each tractor as of the last date that tractor was in production.
Quik-Tatch weights are used to better ballast tractors for both field and loader applications.
Applies to tractor models:
- Maximum of 4 weights on 2040, 6 weights on 2240, and 8 weights on 2440 and 2640 Tractors.
- Maximum of 10 weights per tractor on 2840, 2940, 3150, 4030, 4040, 4230, 4240, 4430, and 4630 Tractors.
- Maximum of 6 weights on 2355N; 8 weights on 2555 Low-Profile, 2755 Low-Profile, and 2855N.
- Maximum of 4 weights on 2155, 6 weights on 2355, and 8 weights on 2555 and 2755 Tractors.
- Maximum of 10 weights on 2955 and 12 weights on 2955 Tractors equipped with high lift capacity.
- Maximum of 14 weights on 4440 Tractors.
- Maximum of 20 weights on 4640 and 4840 Tractors.
- Maximum of 14 weights on 4055 and 20 weights on 4255 and 4455 Tractors.
- Maximum of 20 weights on 4555, 4560, 4755, 4760, 4955 and 4960 Tractors.
- Weights only for 7200, 7400,7600, 7700 and 7800 Tractors.
- Weight support only for 7600 (SN -7754), 7700 (SN -9088), 7800 (SN -14027) Tractors. For all 7200 and 7400 Tractors and 7600 MFWD (SN7755- ), 7700 MFWD (SN9089- ), and 7800 MFWD (SN14028- ): R129660 shown.
Operator''s Station
The 9-pin electrical connector is required to allow TouchSet depth control to be used with implements with this feature. The harness provides a position input to the tractor selective control valve unit enabling the TouchSet system.
This feature allows the operator to adjust height and depth of remote lift cylinders by using the TouchSet controls in the cab.
Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.
Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.
RAM is a trademark of National Products Inc.
The accessories bracket is available for mounting monitors, phones, radios, and other accessories in one convenient location.
The bracket connects in the existing holes inside the cab.
This kit provides antenna mount, radio mounting plate, and wiring for a business band radio.
To better accommodate governmental or commercial sales, a back-up alarm is available as a factory- or field-installed attachment on select models. An alarm sounds whenever the transmission is placed in reverse. The alarm provides a high level of warning that the tractor is changing direction.
A backup alarm is base equipment on 9R and 9RT Scraper Special Series Tractors.
Cell phones, tablets, and other devices are key tools for farming today. John Deere has now made it easier than ever to incorporate these tools into the operator's station.
Stay connected with the RAM® cell phone and tablet mounts. John Deere offers a vast selection of adjustable accessory mounting solutions and media devices to fit every need and application.
RAM is a trademark of National Products Inc.
Cornerpost Display Bracket - PF90385
The floor insulation kit can reduce cab heat generated by transmission and hydraulic oil temperatures below the cab floor. It can reduce the overall cab temperature, as it works as a thermal barrier. The product comes in a large sheet, which is easily cut to fit the contours of the cab floor.
The kit is large enough to fit the floor pan design of 6 through 9 Series Tractor cabs.
A favorite worldwide, the RAM self-leveling cup holder is now available as a kit - designed specifically for Deere equipment. It is easily installed to keep your favorite beverage upright even in the roughest terrain. The perfect accessory for any cab that has 10-mm mounting bosses.
The new cup holder features a unique self-leveling design. This pivoting design allows easy adjustment for the holder while offsetting motion of the vehicle when moving.
Features and applications:
- Self-leveling action reduces spills
- Durable design for rough environments
- Easy adjustable mounting for ideal placement
- Includes John Deere branded beverage insulator
- Compatible with most monitor brackets and all 10-mm threaded bosses
The producer can utilize various integrated technologies during sprayer operation and the following attachments allow them to properly fit, display, and charge these accessories:
- BRE10015 — Cell phone mount
- BRE10255 — Tablet mount
- RE343680 — Accessory mounting bracket
Windshield Wiper with Washer, Rear - RE337750
Power Take-off (Pto)
Fully independent 1000-rpm PTO is available as a factory- or field-installed option.
- Available on all 9R and 9RT Series Ag Tractors regardless of transmission.
- Full-power capability for maximum utilization (9R Series Tractors derate to 319 PTO hp when tractor is stationary)
- 44.5-mm (1.75-in.) diameter shaft.
Electrohydraulic (EH) PTO control
The 9R Series Tractor utilizes an EH PTO-engagement switch to activate the optional 1000-rpm PTO.
Radio
Premium Radio Package with XM Radio - BRE10196
This kit replaces the rear upholstery behind the operator seat with an additional panel containing a grille screen and base speaker. It allows the tractor to reproduce a deeper range of base tones with seamless installation. The clean look and powerful sound adds a level of comfort and enjoyment for long days in the cab.
John Deere radio packages provide powerful performance with standard four-speaker systems. The standard radio package features easy-to-use operator controls located on the CommandCenter™ display and at the radio faceplate. AM/FM and weatherband tuner allows operators to stay tuned to their favorite radio stations and keep current with ever-changing weather patterns. An auxiliary input for connecting an external media source is conveniently located on the right-side console.
The premium radio package adds to these great features with Bluetooth® to connect with compatible media devices and a USB input for connecting external media sources. A subwoofer is also available in this package to increase the operator experience within the cab.
Both radio packages help create a comfortable operator environment for long hours in the cab.
Standard radio package
- AM/FM and weatherband tuner (NOAA broadcast channels)
- External antenna
- Remote controls through the CommandARM™ controls (volume, mute, channel up/down)
- CommandCenter display with station selection, volume level, and station presets
- Auxiliary input (3.5 mm [0.14 in.]) on right-side console
- Four coaxial speakers
Premium radio package*
- AM/FM, weatherband (NOAA broadcast channels), and worldwide premium tuner
- External antenna
- Remote controls through CommandARM (volume, mute, channel up/down)
- CommandCenter display with station selection, volume level, and station presets
- Universal serial bus (USB) input
- Auxiliary input on right-side console
- Bluetooth capable with microphone (allows phone and streaming audio)
- Four coaxial speakers
- Subwoofer
*XM Satellite functionality for premium radio needs to be upgraded by purchasing the XM antenna, XM receiver, brackets, and wiring harnesses via a kit from your local John Deere dealer.
Bosch is a trademark of Robert Bosch GmBH. Bluetooth is a trademark of Bluetooth SIG Incorporated. XM is a trademark of XM Satellite Radio Incorporated. Delco is a trademark of General Motors LLC.
Rear Hitch
Hitch/coupler allows for quick, no-hassle hookups to many popular integral implements.
Features include:
- Tubular and box-welded steel construction.
- Heat-treated bushings to prevent cracking and breakage.
- Heat-treated hooks for long wear life.
- Locking handles that rotate 100 degrees to open the locking lugs for easy implement release.
- Hardened and zinc-plated steel alloy pins to take the shock of heavy loads and withstand exposure to the elements.
Hitch/coupler allows for quick, no-hassle hookups to many popular integral implements.
Features include:
- Tubular and box-welded steel construction.
- Heat-treated bushings to prevent cracking and breakage.
- Heat-treated hooks for long wear life.
- Locking handles that rotate 100 degrees to open the locking lugs for easy implement release.
- Hardened and zinc-plated steel alloy pins to take the shock of heavy loads and withstand exposure to the elements.
An option for a factory-equipped Category 5 drawbar with a Category 4 conversion kit included is available on 9420RX and 9470RX Tractors for producers who have Category 4 implements that cannot be converted to Category 5.
A Category 5 to Category 4 drawbar conversion kit is also available as an attachment kit.
NOTE: The preferred method when operating high-horsepower tractors is to convert implements to Category 5.
For additional implement information, please reference the planting and seeding or the tillage information.
Optional 3-point hitches increase the tractor's versatility
A 3-point hitch with Quik-Coupler is available as a factory- or field-installed option.
Electronic draft-sensing relays load information to the electrohydraulic hitch control module for fast, smooth, accurate hitch corrections.
Tractors used in deep-ripping applications with hitch-mounted implements and all other applications with high vertical loads on the rear of the tractor are recommended to be equipped with a cast-tapered roller-bearing gudgeon. Tractors equipped with dozer blades for silage packing operations are also recommended to be equipped with this option.
If ordering a 3-point hitch with standard flow hydraulics, four, five, or six selective control valves (SCVs) are available.
If ordering a 3-point hitch with high-flow hydraulics, five or six SCVs are available.
Model | 9370R | 9420R | 9470R | 9520R | 9570R | 9620R | |
Code: | Category 4N/3 | x | x | x | |||
Code: | Category 4/4N | x | x | x | x | x | x |
Code: | Category 4N/3 | x | x | x | |||
Code: | Category 4/4N | x | x | x | x | x | x |
*Factory observed*
Hitch controls
An ergonomically-designed hitch command control console makes it easy to operate the hitch. See the hitch controls section for more information.
The rear hitch has pin joints located in the top lift carrier that uses pins (R304684) which can wear and require replacing to restore smooth operation over time.
The heavy-duty greasable pin kit provides a greasing zerk fitting on each pin for a grease shot to be included as part of the tractor’s grease maintenance.
This kit allows for the pin replacement to last far longer than the standard installed pin so long as it is regularly greased. This update will reduce or eliminate the need for future pin replacement in this joint.
Seat
The 3-in. field-installed seat belt kit is designed for use with the 8R and 8RT Series Tractor operator seats. The seat belt kit is offered to meet regulations that require a seat belt anchorage force similar to the SAE J386 (including previous versions up to 22.2 kN anchorage strength), IOS 6683, and OSHA requirements (29CFR1926.602) for earthmoving operations and non-agricultural tractor operations.
NOTE: John Deere recommends reviewing the seat belt kit performance capabilities to ensure compliance with local, state, regional, and national requirements.
Trailer Brake
Transmission
Weights
One Left Side Narrow Profile Track Frame Weight Bracket - RE341174
One Right Side Narrow Profile Track Frame Weight Bracket - RE341175
Quik-Tatch™ front weights are used to obtain the correct weight split to counterbalance rear-mounted implements. Each weight (R127764) weighs approximately 43 kg (95 lb). Weight support is designed to hold up to 26 Quik-Tatch weights.
IMPORTANT: Do not exceed 22,680 kg (53,000 lb) when ballasting 9030T Series Track Tractors.
Quik-Tatch™ front weights are used to obtain the correct weight split to counterbalance rear-mounted implements. Each weight (R127764) weighs approximately 43 kg (95 lb). Weight support is designed to hold up to 26 Quik-Tatch weights.
IMPORTANT: Do not exceed 22,680 kg (53,000 lb) when ballasting 9030T Series Track Tractors.
Wheel Weights
Field-installed weight for tractors that require additional weight
Front idler starter weights can be used by operators as a starter weight to add additional idler weights to the front of a track tractor to offset the weight of a hitch-mounted or drawn implement that exerts heavy loads on the rear of the tractor.
One pair of starter weights is required per idler to add additional wheel weights on the inside and outside of the front idler wheel.
NOTES:
1. Starter weight is required to install additional wheel weights on the idler.
2. Order attaching hardware through Parts.