410R SPRAYER
Sprayer
- 1,000-gallon (3,785 L) tank
- Up to 132-foot (40.23 m) boom
- 310 hp, 9.0 L engine
- 35 mph (56.3 km/h) transport speed
Apply For Financing
View Product Brochure
Features
Spray, save, and protect yield with See & Spray™ systems
When margins are tight and application windows are narrow, every dollar and every droplet need to work as hard as they can. John Deere See & Spray products bring resource-saving precision to the field:
- See & Spray Select: Covers fallow fields using advanced camera and nozzle-control technology to spray only emerged weeds. It can also apply traditional broadcast application.
- See & Spray Ultimate: For in-season application on corn, cotton, or soybeans in 76.2-cm (30-in.) or greater rows or fallow ground using machine learning to identify weed from crop. Also includes a dual product solution system that allows two separate tank mixes to be utilized, better combating herbicide resistance and time inefficiency with two passes in one. It can also apply traditional broadcast application.
|
See & Spray Select |
See & Spray Ultimate |
Fallow use
NOTE: Ultimate can see weeds approximately 0.635 cm (¼ in.) in diameter by 0.635 cm (¼ in.) in height. Select can see 0.9 cm (0.35 in.) in diameter by 1.5 cm (0.6 in.) in height. |
Yes |
Yes |
In-season use
NOTE: If the crop canopy covers the row, then cameras cannot see weeds. The system can see weeds that are approximately 0.635 cm (¼ in.) in diameter by 0.635 cm (¼ in.) in height. |
No |
Yes |
Targeted spray plus broadcast |
Yes |
Yes |
Dual product solution system/split tank
NOTE: Can combine tanks to use at full capacity. |
No |
Yes |
Night spray capable |
Yes (model year 2023 and newer) |
No |
Speeds up to 19.3 km/h (12 mph)
NOTE: While using targeted spray. |
Yes |
Yes |
Technology evolution
John Deere has focused on taking farmers’ application from field level to plant level over the years. From field to broadcast, section control to ExactApply™ individual nozzle control, and now the next step – to artificial intelligence and machine learning. Both See & Spray offerings work in conjunction with ExactApply nozzle control. They use a combination of cameras and processors to detect weeds before activating only the nozzles necessary to apply a burst of herbicide to the weed, achieving a hit rate comparable to traditional broadcast spray.
Data insights
How do you know See & Spray is doing its job? With the monitoring capabilities of John Deere Operations Center™ application and the Generation 4 4600 CommandCenter™ Display, you can track job quality and savings during and after application. These technology tools also offer weed pressure mapping, providing insights to make even better field management decisions.
Sustainability
Using less herbicide means using less water and creating less opportunity for drift, and that’s good for the land, water, and air that sustain us.
Additionally, See & Spray provides even more benefits for growers looking to make the best possible decisions about weed control.
See & Spray Ultimate benefits
- Improve weed control – Combat herbicide resistance with a dual-product solution system that uses two independent tank mixes in one pass, avoiding antagonism in more aggressive tank mixes.
- Reduce solution use – Reduce the applied volume of herbicide by more than two-thirds by avoiding inefficient traditional broadcast application in corn, cotton, and soybeans.*
- Gain cost efficiency – More than two-thirds spray volume reduction means significantly lower herbicide costs, fewer tendering stops, and more acres covered in a day.
NOTE: Results based on internal John Deere strip trials in corn, soybeans, and cotton in Iowa, Mississippi, Texas, and Illinois in typical growing conditions with carrying weed size, crop canopy, and field conditions using targeted spray of non-residual herbicide only and using current software/algorithm at time of trials. Results will vary based on crop and weed pressure.
See & Spray Select benefits
- Reduce solution use – By avoiding inefficient traditional broadcast applications and spraying only when weeds are detected, you can reduce the applied volume of herbicide by 77 percent.**
- Gain cost efficiency – Significantly reduce herbicide costs, make fewer tendering stops, and cover more acres in a day.
- Improve weed control – You may save enough to justify applying a different chemistry while improving your ability to manage herbicide-resistant weeds. Research has shown that weeds sprayed with complex tank mixes and more than two modes of action are 83 times less likely to develop herbicide resistance.
**NOTE: In tests over 75,000 acres of fallow ground, typical weed pressure of 3,000 weeds per acre, and with spray length settings of small medium, customers experienced an average herbicide savings of 77 percent compared to a traditional broadcast sprayer.
Cover more acres more accurately and more consistently with ExactApply™ system
Fertilizers and crop protection products are too expensive to waste, and seed is too valuable to risk over- or under-treating. To help make sure your solution is getting to the crop at exactly the right rate and droplet size across a wider range of speeds, look to ExactApply nozzle control system.
The heart of the ExactApply system is a six-nozzle turret with multiple modes of operation to help maintain target rate and pressure. From the cab, operators can choose:
- 15-Hz pulse-width modulation (PWM) pulses one solenoid for more consistent pressure and droplet size over a wider range of ground speeds and application rates.
- 30-Hz PWM pulses both solenoids at 15 Hz for more thorough coverage during high-volume applications, like liquid fertilizer.
- AutoSelect A/B mode automatically switches between two nozzles to maintain a constant spray pressure while you’re spraying conventionally.
- Turn compensation mode decreases the spray rate on the inside of a turn while increasing the rate on the outside, ensuring consistent application across the entire width of the boom.
- Individual nozzle control minimizes overlap by controlling spray application at the individual nozzle level, not in 2.4- to 3.35-m (8- to 11-ft) section widths.
By maintaining a target rate and pressure over a wider range of speeds, ExactApply lets you cover up to 20 more acres per hour (based on a 3.2-km/h [2-mph] increase in operating speed) with more consistent spray deposition, saving you input costs and preserving more of your crop’s yield potential.
ExactApply is available as a factory-installed option, or as a retrofit to 400, 600, and 4 Series Sprayer models.
Save product with pressure recirculation and product reclaim
Quality of application is critical. Avoid settling in the plumbing by keeping solution in motion with pressure recirculation, coupled with product reclaim and boom air purge. These features save precious time, product, and expense when rinsing and priming the boom while switching solutions.
Cost savings
- Pressure recirculation primes the boom versus traditional boom prime where liquid tends to be sprayed out, saving 113.6 L (30 gal.) each time. If an operator does this process 10 times a day, coupled with approximately 85.2 L (22.5 gal.) of solution savings with product reclaim one to two times per day, these two features together could save up to $600* a day.
- *NOTE: Assumes 113.6 L (30 gal.) of residual product in the system at 93.5 L/ha (10 gpa) and $20 per acre 10 times per day. Adjust the calculation to suite your operation.
- Reclaim expensive crop protection solutions between applications or required service in the field with product reclaim.
- Potentially reduce crop damage from residual chemical buildup.
Performance:
- Experience uniform distribution of product across the boom.
- Reduce nozzle clogging with increased agitation of product in solution system.
Keep solution in suspension in the boom and system while the machine is on and not spraying with pressure recirculation. Recirculation during rinsing removes any chemical that settled out of the suspension while spraying, resulting in higher rinse water velocity in the spray pipe. Rinse water can be recirculated multiple times to further clean spray pipes and reduce cleanout times. Boom pressure recirculation mixes the solution and primes the boom before spraying to obtain a homogenous chemical mixture throughout the solution system and up to the nozzle tip. This recirculation improves spray quality and reduces time at the start of spraying.
Product reclaim transfers chemical out of the boom plumbing into solution tanks to improve boom rinse functions, also reducing exposure when servicing nozzle bodies. Additionally, save on chemical cost and enable easier rinse water collection between rinses when operators are not spraying out of the boom in the field.
Greater fuel efficiency and lower cab noise with CommandDrive™ powertrain
With the CommandDrive powertrain, save fuel, reduce cab noise, get improved traction in challenging conditions, and cover more acres per day. CommandDrive offers the operator an Auto Mode that automatically directs the engine to run at the lowest rpm necessary to maintain ground speed and hydraulic functions and to meet the demands of the solution system.
CommandDrive also allows operators to adjust the aggressiveness of acceleration and deceleration and features an Auto Idle system that reduces engine speed to 900 rpm when the machine is in park. It all adds up to:
- 20 percent or greater fuel savings
- More acres sprayed per day, thanks to fewer fuel stops and improved traction in rough conditions
- Reduced in-cab noise levels by 3to 5 decibels
- Fewer demands on the operator
CommandDrive is base equipment on all 408R, 410R, 412R, 612R, and 616R Sprayers, as well as 400R and 600R Dry Spinner Spreaders.
Bumps, rolls, and hills: BoomTrac™ Pro 2 system can handle it all
For the highest level of spray accuracy with less drift and reduced risk of boom damage, look to the BoomTrac Pro 2 automatic boom-height control system.
Thanks to the addition of an inertia-monitoring sensor that helps correct for chassis roll, BoomTrac Pro 2 offers up to 22 percent greater spray accuracy (composite score over a variety of terrains) compared to the previous BoomTrac Pro system, and a five time increase in the amount of time the boom maintains its target height, which is a real plus in rough or hilly conditions. Along with the improved accuracy and reduced drift, operators will appreciate having one less function to perform and one less thing to worry about.
NOTE: BoomTrac Pro 2 is required on all carbon fiber booms.
Simple turnkey experience with the StarFire™ 7000 Integrated Receiver
The StarFire 7000 Receiver is the latest addition to the suite of Precision Ag Technology from John Deere. The StarFire 7000 Receiver offers greater accuracy, faster pull-in times, and season-to-season repeatability. This means less hardware, faster times recovering from a shading event, and the confidence that your guidance lines and boundaries do not shift from year to year. The integrated design further enhances the value that you have come to expect from StarFire products.
Similar to the StarFire 6000 Integrated Receiver, the StarFire 7000 eliminates all setup, installation, and calibrations. There is no need to verify machine and receiver measurements, as this has been done precisely for you at the factory. You will spend 60 minutes less per receiver move each season, which gives you more time to focus on other parts of your operation.
With updated Ethernet connectivity, software updates are easier and faster. StarFire 7000 Integrated Receiver maintains the speed to update software in under 4 minutes while remaining in the cab. Over-the-air updates are 85 percent faster with the StarFire 7000 Integrated Receiver because of Ethernet connectivity.
Benefits to the StarFire 7000 with SF-RTK
- 5-year repeatability
- 10-minute pull-in time
- 2.5-cm (1-in.) pass-to-pass accuracy
- Drop-in replacement for StarFire 6000 Integrated Receivers
To learn more about the StarFire 7000, visit the StarFire 7000 page.
Keep operators fresh with Comfort and Convenience packages and Visibility packages
When you’re staring down a string of 2,000-acre days, your equipment isn’t all that needs to be operating at peak – your operators need to be at their best, too. That’s why John Deere put together a range of cab packages to give you just the right features to keep your operators comfortable and efficient.
For corner-office comfort that can help make short work of the longest days, take a look at the Ultimate Comfort and Convenience package. The heated, ventilated ActiveSeat™ II isolates the operator from up to 90 percent of vertical movement and comes in leather with massage functions. The Ultimate package also gives you a premium XM® ready sound system with subwoofer, a leather-wrapped steering wheel, a refrigerator, and more.
When the long days turn into long nights, you’ll be glad you ordered the Ultimate Visibility package. A full 360 degrees of powerful light-emitting diode (LED) cab lighting gives you a clear view all around the machine, while eight LED service lights illuminate critical service areas.
The following table gives a quick reference of what is contained in the Visibility packages.
|
Feature |
Premium Visibility package |
Ultimate Visibility package |
Cab |
Halogen work lights (cab roof) |
--- |
--- |
LED work lights (cab roof) |
Six |
Six |
|
LED beacons (cab roof) |
Two |
Two |
|
LED convenience lights |
Eight |
Eight |
|
Front sunshades |
X |
X |
|
Right-side sunshades |
X |
X |
|
Rear sunshades |
X |
X |
|
Front wiper |
X |
X |
|
Right-side wiper |
X |
X |
|
Vehicle |
Halogen work lights (vehicle) |
--- |
--- |
Halogen hood work lights |
--- |
--- |
|
Halogen high beam (hood) |
--- |
--- |
|
Halogen low beam (hood) |
Two |
Two |
|
LED high beam (hood) |
Two |
Two |
|
LED work lights (vehicle) |
Six |
Six (two of these are higher, 4400-lumen output lights) |
|
LED hood work lights |
Four |
Four |
|
LED beacons |
One rear |
One rear |
|
Boom LED lights |
Two |
Two |
|
Boom halogen lights |
--- |
--- |
|
Manually adjustable left-hand and right-hand boom mounted with bubble mirror |
X |
X |
|
Manually adjustable right-hand cab |
--- |
--- |
|
Electrically adjustable and heated right-hand cab |
X |
X |
|
Manual underframe mirror |
--- |
--- |
|
Electrically adjustable and heated underframe mirror |
X |
X |
|
Additional camera ready |
X |
--- |
|
Left-hand and right-hand side view camera ready |
--- |
Not available for factory install on model year 2023 machines |
|
Integrated backup camera |
X |
X |
In addition to the Visibility packages available, the following table gives a quick reference of what is contained in the Cab Comfort and Convenience packages.
Select Comfort and Convenience package | Ultimate Comfort and Convenience package | |
Cloth seat | X | --- |
Leather seat with carpeted floor mat | --- | X |
ActiveSeat™ II | --- | X |
Heated and ventilated leather seat with massage functionality | --- | X |
Mechanical fore/aft and lumbar support | X | --- |
Electronic controls and pneumatic lumbar support | --- | X |
Adjustable right-hand CommandARM™ controls with integrated CommandCenter™ touchscreen display | X | X |
24-degree right-hand seat swivel and 8-degree left hand seat swivel | X | --- |
24-degree right-hand seat swivel and 24-degree left-hand seat swivel | --- | X |
AM/FM Aux and Bluetooth® wireless inputs plus two cab speakers | X | --- |
16.5-cm (6.5-in.) touchscreen radio, XM ready, and 6.1 speaker system with subwoofer including AM/FM Aux with Bluetooth™ wireless inputs | --- | X |
Automatic temperature controls with controls located on CommandARM | X | X |
Footrests | --- | X |
Business band ready | X | X |
Refrigerator | --- | X |
Four USB and one 12-V outlet | X | X |
Right-hand accessory rail | --- | X |
120-V outlet | --- | X |
Leather-wrapped steering wheel | --- | X |
Some of the features in the chart above are also available as attachments. There are also many options for mounting a variety of monitors, tablets, and phones.
*NOTE: Bluetooth where certification allows.
Bluetooth is a trademark of Bluetooth SIG, Inc. XM is a trademark of Sirius XM Radio, Inc.
John Deere Signature Edition: the ultimate in comfort, visibility, and technology
NOTE: Not available on sprayers ordered as dry box only.
To make the most powerful John Deere options available in one cost-effective package, 408R through 616R Sprayer models can be ordered as John Deere Signature Edition. Marked with an exclusive badge only available on the Signature Edition, this package includes:
- Ultimate Comfort and Convenience package
- Ultimate Visibility package
- ActiveSeat™ II equipment
- JDLink™ 5-year subscription
- Premium 3.0 or Automation 4.0 activation
- 4G LTE connectivity hardware
- Automatic Solution Control*
- BoomTrac™ Pro 2*
- ExactApply™ system*
Get all the top-of-the-line comfort features and technology options in one special edition: The John Deere Signature Edition.
For any additional mounting needs, there are part solutions available through John Deere to resolve unique mounting configuration needs.
*NOTE: Automatic Solution Control, BoomTrac Pro 2, and ExactApply system are not available on the 400R and 600R.
Precision Ag Technology enables you to monitor performance and maximize productivity
Connect Mobile overview
John Deere Connect Mobile is a solution that utilizes an Apple® iPad® tablet in the cab that provides the operator a better understanding of the sprayer’s performance. Connect Mobile documents and displays several sprayer performance attributes, helping the operator monitor and more easily detect problems that can occur while spraying. Connect Mobile also has a common user interface that makes it easy to use between different pieces of John Deere equipment. Once the job is done, the iPad with the spraying data can be utilized to perform basic crop scouting activities in the field.
Spraying attributes
Monitor key performance indicators in map layers and dashboard tiles such as:
- Actual rate
- Rate deviation
- Pressure
- Ground speed
- Droplet size
- Target rate
- Flow rate
- Tank volume
- Productivity
- Fuel rate
In base equipment
Connect Mobile hardware is factory installed on all model year 2022 and newer 408R, 410R, 412R, 612R, 616R, 400 and 600 Series Sprayers and dry machines as well as model year 2017 to 2021 R4030, R4038, R4044, R4045, and R4060 Sprayers, making it easy to get started with Connect Mobile.
Learn more about Connect Mobile in the Field and Crop Solutions section within the Precision Ag Technology product line and how it can improve the quality of a spraying job.
iPad and Apple are trademarks of Apple Inc.
John Deere Connected Support™ prevents downtime and efficiently resolves issues with revolutionary technology-based solutions
When you buy John Deere equipment, you expect reliability. You also know that problems can happen, and a product is only as good as the support behind it. That’s why John Deere equipment is prepared with technology that senses potential issues and can alert you and your dealer promptly—in the cab or anywhere you are.
John Deere Connected Support is a revolutionary change to support that leverages technology and the connectivity of JDLink™ telematics to prevent downtime and resolve problems faster. These tools decrease downtime by an average of 20 percent, enabling faster responses to unexpected problems and reducing technician trips to your machine. For some issues, unplanned downtime can even be prevented altogether through prediction of the issue.
With your permission, John Deere Connected Support:
- Keeps you running by monitoring machine health and promptly alerting you and your dealer of issues
- Saves time by remotely viewing in-cab displays, reducing trips to the machine
- Reduces or even eliminates technician trips to a machine through remote diagnostic and remote software reprogramming capabilities
- Connects experts with the information needed to respond to downtime faster and prevent it altogether
With more than a decade of experience leveraging connectivity to solve problems, no one else has the experience, tools, and knowledge to keep you running as John Deere and your John Deere dealer can. Connected Support is an in-base feature on all John Deere products with factory- or field-installed JDLink.
New Leader® Dry Spinner Spreader offers maximum versatility
Get three-season flexibility from your application equipment with the New Leader DS20 or DS30 Dry Spinner Spreader.
The DS20 offers of up to 5.6-m3 (200 cu ft), or 6.6 tons, of dry fertilizer, while the DS30 bumps capacity to 8.5 m3 (300 cu ft), or 9 tons, of dry fertilizer. Both models feature:
- Four-hour conversion from a liquid-application setup
- Variable-rate application ranging from 34 kg/ha (75 lb/acre) to 3 tons/acre
- Spread width of up to 32 m (105 ft) thanks to the 1.83-m (72-in.) spinner height
- New Leader G4 spinner technology for a consistent spread pattern and more uniform application
- Single or dual product bins in 304 stainless or 409 painted spreader construction with #4 belt-over-chain conveyor
Dry Spinner Spreader compatibility chart
|
DS20 with 12.7-cm (5-in.) feedgate (not approved for ag lime) |
DS20 with 28-cm (11-in.) feedgate (ag lime compatible) |
DS30 with 12.7-cm (5-in.) feedgate (not approved for ag lime) |
DN495 |
408R |
X |
--- |
--- |
--- |
410R |
X |
--- |
--- |
--- |
412R |
X |
--- |
--- |
--- |
612R |
X |
X |
X |
--- |
616R |
X |
X |
X |
--- |
400R |
X |
--- |
--- |
--- |
600R |
X |
X |
X |
--- |
800R |
--- |
--- |
--- |
X |
New Leader is a trademark of Highway Equipment Company.
Specifications
Compare the specifications of up to 4 models
Key Specs | 410r-sprayer Current Model |
---|---|
Rated engine power | 231 kW 310 hp |
Maximum engine power | 246 kW 330 hp |
Solution system - Capacity | 3800 L 1000 gal. |
Rinse tank capacity | 454.2 L 120 gal. |
Boom length options/Material | 27.4, 30.5, 36.6, or 40.2 m 90, 100, 120, or 132 ft Boom material: Steel or carbon fiber |
Spray speed range | 0 to 40.2 km/h 0 to 25 mph |
Transport speed, maximum | 56.3 km/h 35 mph Europe only: 40 km/h 24.9 mph |
Suspension | Dual-strut independent wheel air-ride suspension |
Crop clearance with standard tires | 152 cm 60 in. |
Total weight (empty solution tank) | 15,058 kg 33,197 lb *Includes: 36.6-m (120-ft) steel boom, pressure recirculation, ExactApply™, and 38.1-cm (15-in.) spacing. Weight will vary depending on all options. |
Engine | |
Rated engine power | 231 kW 310 hp |
Maximum engine power | 246 kW 330 hp |
Emissions | Final Tier 4 (FT4) |
Number of cylinders | Six |
Displacement | 9 L 549 cu in. |
Alternator | 250 amp |
Fuel tank capacity | 565 L 149.2 gal. |
Diesel exhaust fluid (DEF) tank capacity | 29.5 L 7.8 gal. |
Solution system | |
Capacity | 3800 L 1000 gal. |
Tank material | Stainless steel |
Rinse tank capacity | 454.2 L 120 gal. |
Quick fill size | 7.6 cm 3 in. |
Automatic section control | John Deere Section Control (optional) |
Solution system control | Manual Optional: Automatic |
Fill location | Side fill, front fill (optional) |
Chemical injection method | Direct injection (optional) |
Chemical eductor | Stainless steel |
Chemical eductor capacity (size) | 32 L 8.5 gal. |
Flow meter size | 5.1 cm 2 in. |
Suction strainer | 20 mesh |
Pressure strainer | 50 mesh |
Boom strainer | 80 mesh |
Boom | |
Boom length options | 27.4, 30.5, 36.6, or 40.2 m 90, 100, 120, or 132 ft |
Automatic boom height | BoomTrac Pro 2 - five sensor (optional) |
Plumbing material | Stainless steel Optional: Polyethylene |
Boom Material | Steel or carbon fiber |
Ground height adjustment | 50 to 245 cm 19.6 to 96.5 in. |
Breakaway width | Stainless-steel boom: 3.3 m 10.8 ft Carbon fiber boom: 3.7 m 12.1 ft |
Boom sections | 13 sections with boom length: 40.2 m 132 ft 11 sections with boom length: 36.6 m 120 ft 9 sections with boom length: 30.5 m 100 ft 7 sections with boom length: 27.4 m 90 ft |
Nozzle spacings | 38.1 or 50.8 cm 15 or 20 in. |
Drivetrain | |
Type | Hydrostatic |
Drive | Full-time four-wheel drive (4WD) |
Shifting | Electrohydraulic |
Hydraulic reservoir capacity | 98 L 26 gal. |
Spray speed range | 0 to 40.2 km/h 0 to 25 mph |
Transport speed, maximum | 56.3 km/h 35 mph Europe only: 40 km/h 24.9 mph |
Chassis | |
Dry compatible | Yes: 5.7 m3 200 cu ft |
Suspension | Dual-strut independent wheel air-ride suspension |
Crop clearance with standard tires | 152 cm 60 in. |
Front tires | 320/90 R46, 380/90 R46, or 420/80 R46 |
Rear tires | 320/90 R46, 380/90 R46, or 420/80 R46 |
Flotation tires | 520/85R38 or 620/70R38 (field installed only) |
Hydraulic tread adjust | Standard |
Wheel tread spacing | 305 to 406 cm 120 to 160 in. |
Wheel base | 430 cm 169.3 in. |
Turning radius | 8.7 m 28.5 ft |
Parking brake | Spring-engaged, hydraulically disengaged wet disk pack |
Primary brakes | Hydrostatic |
Ladder raise/lower | Automatic |
Total weight (empty solution tank) | 15,058 kg 33,197 lb *Includes: 36.6-m (120-ft) steel boom, pressure recirculation, ExactApply, and 38.1-cm (15-in.) spacing. Weight will vary depending on all options. |
Options | |
Air compressor | Standard: Onboard air |
Foam marker capacity | Air injection foamer: 5.7 L 1.5 gal. |
Accessories and Attachments
Ag Management Solutions
StarFire™ 6000 Receiver locking bracket
A locking bracket provides added protection against theft and vandalism when machines are out of sight. Removal of the StarFire 6000 Receiver is only possible when the correct key is used to open the lock.
Boom Air Purge
Boom air purge forces air through the boom to help clean out the solution plumbing during product changeover. When activated on the display, air from the on-board air tank is routed to the booms to purge out any additional water or product through the nozzles.
Cab Equipment
RAM 1.5 inch T-slot Ball Mount - 6822NBRE10483
Tablet Mount Kit - 6822NBRE10255
Chemical Eductor
Crop Shields
Belly and wheel motor shields provide added machine protection
Belly shields can be ordered as a factory-installed option for machines that need added protection for the underside of the sprayer when operating in tall crops. These shields help to keep the sprayer clean and free of debris that could collect from crop contact, as well as help crop flow smoothly under the sprayer. The shields can be quickly removed for service and maintenance if required.
Air-spring cover boot
The air-spring cover is an aftermarket part, which seals the air spring from dusty field conditions and harsh crop conditions, allowing for added protection of the machine’s suspension systems.
NOTE: For additional information, please refer to DTAC Solution 96640.
Wheel motor shields
Standard factory-installed wheel motor shields help to keep crop and mud away from the inside of the wheel motor for easier cleaning, added protection from field debris, and smooth crop flow around the wheel motor.
Engine
2.5 gal. jug of John Deere™ Diesel Exhaust Fluid - 6822NSWDEF025
275 gal. Tote of John Deere™ Diesel Exhaust Fluid - 6822NSWDEF275
330 gal. Tote of John Deere™ Diesel Exhaust Fluid - 6822NSWDEF330
55 gal. drum of John Deere™ Diesel Exhaust Fluid - 6822NSWDEF055
Fence Row Nozzles
Fenders
Belly and wheel motor shields provide added machine protection
Belly shields can be ordered as a factory-installed option for machines that need added protection for the underside of the sprayer when operating in tall crops. These shields help to keep the sprayer clean and free of debris that could collect from crop contact, as well as help crop flow smoothly under the sprayer. The shields can be quickly removed for service and maintenance if required.
Air-spring cover boot
The air-spring cover is an aftermarket part, which seals the air spring from dusty field conditions and harsh crop conditions, allowing for added protection of the machine’s suspension systems.
NOTE: For additional information, please refer to DTAC Solution 96640.
Wheel motor shields
Standard factory-installed wheel motor shields help to keep crop and mud away from the inside of the wheel motor for easier cleaning, added protection from field debris, and smooth crop flow around the wheel motor.
Filling and Transfer Hose Connections
50.8-mm (2-in.) fill hose with cam lock coupler ends - 9 m (30 ft) length - 6822NBN400055
76.2-mm (3-in.) fill hose with cam lock coupler ends - 9 m (30 ft) length - 6822NBN400056
Foam Marker System
Front Fill
The 7.62-cm (3-in.) front fill supports both push-on and pull-on filling, and a simple switch interface enables the operator to choose the preferred way to fill the machine. The air purge feature allows the plumbing to be cleaned out and pushed into the solution tank, allowing for easier cleanout of the system.
NOTE: Front fill is not compatible with Load Command™ system.
Liquid Boom Plumbing
27.432-m (90-ft) boom, SS custom plumbing 25.4-mm (1-in.) SS pipe wet plumbing - (80) 5-position nozzle bodies - 6822NBKK10079
27.432-m (90-ft) boom, poly custom plumbing 25.4-mm (1-in.) poly pipe wet plumbing - (80) 5-position nozzle bodies - 6822NBKK10080
30.48-m (100-ft) boom, SS custom plumbing 25.4-mm (1-in.) SS pipe wet plumbing - (100) 5-position nozzle bodies - 6822NBKK10077
30.48-m (100-ft) boom, poly custom plumbing 25.4-mm (1-in.) poly pipe wet plumbing - (100) 5-position nozzle bodies - 6822NBKK10078
36.576-m (120-ft) boom, SS custom plumbing 25.4-mm (1-in.) SS pipe wet plumbing - (100) 5-position nozzle bodies - 6822NBKK10075
36.576-m (120-ft) boom, poly custom plumbing 25.4-mm (1-in.) poly pipe wet plumbing - (100) 5-position nozzle bodies - 6822NBKK10076
Miscellaneous
400 and 600 Series Sprayers and Dry Spinner Spreaders utilize the 4600 CommandCenter and SpreadStar controller allowing integrated control with the machine and dry spinner spreader.
The CommandARM™ controls, Gen 4 CommandCenter display, and SpreadStar have been updated and tailored to the needs of operators allowing them to see all key functions on one run screen including AutoTrac™ assisted steering system, variable rate documentation, field totals, and dry spinner spreader settings.
The Gen4 CommandCenter display allows operators to set up and apply single or dual products, utilizing variable rate map-based prescriptions with John Deere Section Control functionality. Click anywhere on the display to expand and easily adjust information.
To prepare for field application, simply press the Setup button in the bottom left corner of the display run page, and it will direct the user to the Work Setup window.
- Select the Location box to setup operator information including farm, field, and Operator information is not required to load and execute a variable-rate prescription.
- Select the Equipment box to do the initial setup of the machine including the number of bins in the dry spinner spreader.
- The Work Summary box shows a link for each bin in the dry spinner spreader. The screenshot above is for a two-bin dry box. Select each one to input or change the name of the product that will be applied. Up to 24 unique names can be entered into the display for various product types such as single product, blended product, or multi-product variable rate. The operator can also choose the target rate for spreading or load a variable-rate prescription.
Once the Work Setup window is complete, the updated SpreadStar application can then be used to input and setup the following:
Target spread rate – selecting the target rate box allows the operator to quickly adjust three different target rates or load a prescription if needed. The target rates can be adjusted when spreading by using the corresponding buttons on the CommandARM.
Product density/product applied – selecting either of these areas will take the user to a bin details page where more frequent dry spinner spreader inputs and adjustments are made. For dry spinner spreaders with multiple bins, individual tabs at the top of the screen make it easy to quickly toggle between them.
Features on the bin details page include:
- Bin on/off
- Bin chaining (not shown)
- Product density
- CFR value
- Feed gate opening
- Bin alarms
- Resetting bin counter
- Belt prime
Spinner settings
The last step is to setup the spinner settings by clicking on the spinner settings box in the SpreadStar application. The Add Spinner preset window will come up allowing the operator to create a new preset if they choose.
Preset functions include:
- Spinner target speed
- Spinner target speed alarms
- Spread width
- Fan frame setting
The bin details and spinner settings are saved with the Work Summary details. For example, an operator with a two-bin dry spreader may need to change between a two-product variable rate to a single blend application using bin chaining. When the operator switches back to two-product variable rate, SpreadStar automatically remembers the bin details and spinner settings that were last used with that configuration.
Even with this feature, it is still important to calibrate the dry spinner spreader when changing products to ensure an accurate and consistent spread pattern.
Solution and Boom Storage - 6822NBKK11005
Solution module and boom lifting (all countries) - 6822NBKK11012
Miscellaneous
For protection against fire, a fire extinguisher is available through Parts.
Reference the installation instructions in the operator's manual.
For protection against fire, a fire extinguisher is available through Parts.
Reference the installation instructions in the operator's manual.
Operator's Manual And Decal Kit
Operator's Station
Blank Key - 6822NAL71350
A cloth instructional seat is available for 400 and 600 Series Sprayers.
Sprayer Solution System
Chassis harness - 6822NBKK11561
Direct Injection - 1 High Volume Pump for 100-gal. DI System - 6822NBKK11562
Direct Injection - 1 High Volume Pump for 200-gal. DI System - 6822NBKK11563
Direct Injection - 189.271 L (50 gal) tanks (2) - 6822NBKK10935
Direct Injection - 2 High Volume Pumps for 200-gal. DI System - 6822NBKK11564
Direct Injection: ExactApply valve kit for use with MY14-MY19 DI systems - 6822NBKK11360
Direct injection is available for large 4 Series Sprayers (R4030/R4038/R4045) as a field-installed option. As solution tank mixes become more complex, operators need a better way to manage the products they are mixing in helping to reduce the risk of chemical residue. The integrated direct-injection system provides up to 889 L (235 gal.) of additional carrying capacity for raw chemicals and allows injection of up to two separate products directly into the boom (depending on installed configuration).
Machine | Carrying capacity | Maximum number of chemicals injected |
R4030/38 model year 2015 and older (serial number 10,999 and lower) | 511 L (135 gal.) | Two-one high volume, one low volume |
R4030/R4038 model year 2016 and newer (serial number 11,000 and higher) | 889 L (235 gal.) | Three-two high volume, one low volume |
R4045 | 889 L (235 gal.) | Three-two high volume, one low volume |
NOTE: Low-volume tanks and pumps must be configured with at least one high-volume tank and pump. High-volume tank and pump can be configured by itself.
The high-volume pump can produce spray rates between 0.15 to 5.92 L/min (0.04 to 1.56 gpm). The low-volume pump can achieve spray rates as low as 0.03 to 1.18 L/min (0.008 to 0.31 gpm).
Fully integrated GreenStar™ display
Since the large 4 Series Sprayers (R4030/R4038/R4045) are designed to be direct-injection ready, the system is fully integrated with the GreenStar 3 2630 Display. This means less clutter in the cab due to the elimination of multiple displays as everything is controlled by the GreenStar display. Additionally, direct-injection ready means the electrical architecture of the R4030, R4038, and R4045 is designed for plug-and-play installation. Full integration with direct injection means less downtime and more time spraying in the field.
Model year 2017 direct-injection systems (attachments BKK10302, BKK10303, BKK10304, BKK10305) will have pump-rinse functionality added. Pump-rinse functionality can also be added to a current direct-injection system by adding a three-way inlet valve to each DI pump. The three-way valve connects on one port to the chemical tank for normal operation (injection) and to the clean water rinse tank on the other port (for daily pump rinse).
This feature allows for rinse water to be pulled from rinse tank, through the pump head, and out of the boom mixing chamber. This yields the following benefits:
- Automatic rinse system, integrated with pump operating modes, cleans chemical out of pump
- Reduce chemical residual buildup in pump
- Improved maintenance process, while enabling product to be stored in direct-injection tanks between operation
Dealer Use Only:
With the reduction of overall machine weights for model year 2016 production, model year 2016 and newer R4030/R4038 machines are now approved for installation of up to three pumps and up to 889 L (235 gal.) of concentrate storage (depending on configuration) matching the current R4045 approved configurations. Installing unapproved configurations on model year 2015 and older machines will void warranty and may cause structural machines issues.
NOTE: All injection supply line hoses must be ordered separately. Use the attachment number to locate the install instructions on the Ag Field Installation instructions page.
Direct injection is also available on model year 2013 and model year 2014 4940 models, which if ordered during model year 2017, will include the pump-rinse functionality.
To retrofit the rinse valve on older direct-injection pump configurations, check the chart below to order the following corresponding valve attachments:
Field kit rinse valve pump conversion |
R4030, R4038, and R4045 |
4940 pump |
Base kit ready for the first pump |
BKK10316 |
BKK10308 |
For one additional high-volume pump |
BKK10317 |
BKK10307 |
For one additional low-volume pump |
BKK10318 |
BKK10307 |
Spreader Calibration
Calibration Chute Catch Test Kit - 6822NBKK10753
Size Grade Number (SGN) & Crush Strength Test Kit - 6822NBKK10743
Spread Pattern Test Kit - 6822NBKK10741
Spreader Options
For growers wanting to spread single-bin products like lime and two-product variable-rate fertilizer prescriptions with the same machine, a field- installed end gate kit is available for the DS20 and DS30. After removing the dual-bin insert from the dry spinner spreader, the end gate kit can be installed, making it a single bin.
The single-bin end gate kit includes:
- 304 stainless-steel end gate with hardware
- Inverted V with supporting structure
- Additional hardware and harnessing
For growers wanting to spread single-bin products like lime and two product variable-rate fertilizer prescriptions with the same machine, a field-installed end-gate kit is available for the DN485. After removing the dual-bin insert from the dry spinner spreader, the end-gate kit can be installed, making it a single bin.
The single-bin end-gate kit includes:
- 304 stainless-steel end gate with hardware
- Inverted V with supporting structure
- Additional hardware and harnessing
Attachment | Description |
BKK10751 | DN485 13-cm (5-in.) feedgate and #5 straight belt stainless-steel end gate kit |
BKK10838 | DN485 13-cm (5-in.) feedgate and #4 belt-over chain stainless-steel end gate kit |
Reviews
1 reviews
- Filter
- Star Rating
- Value
- Quality