HHT25SLTA
- Honda 25cc mini 4-stroke engine
- Runs on straight, unleaded gas (no mixing)
- 17" Semi-matic (bump feed) head with Ultra Quiet® line
- Durable flex shaft with lifetime warranty
- Lightweight - 13lbs
Request Maintenance
Specifications
| Engine | GX25 |
| Displacement | 1.53 cu. in.(25cc) |
| Fuel | Unleaded Gasoline (86 Octane or higher) |
| Fuel Tank Capacity | 16.9 fl.oz. |
| Carburetor | Diaphragm Type w/Fuel Pump |
| Idle Speed | 3,100 + 200 rpm |
| Max.(no load) RPM | 10,000 rpm (without cutting head) |
| Dimensions (LxWxH) | 73.5 in. x 12.7 in. x 9.6 in. |
| Dry Weight | 12.3 lb (w/o head) 13.1 lb. (with head) |
| Engine Stop Switch | Slide Type Switch |
| Throttle control | Two Motion Trigger |
| Main Pipe Diameter | 1.0 in. (25.4mm) |
| Main Pipe Thickness | .06 in. (Aluminum) |
| Drive Shaft | Flexible Steel Cable |
| Shaft Support | Nylon Support Sleeve |
| Gear Ratio | 1.235 |
| Handle | Loop Type |
| Cutting Head | Semi-matic Feed-Nylon |
| Line Type | Ultra Quiet |
| Cutting Width | 17" |
| Single Harness | Standard |
| Double Harness | Optional (must be used with all blade applications) |
| Safety Goggles | Standard |
| Steel Blade | 9 inch Blade Optional (requires barrier kit) |
| Blade Barrier Kit | Optional (must be used with all blade applications) |
| Residential Warranty | 2 years |
| Commercial Warranty | 1 year |